NDT Inspector Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the ndt inspector job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.

USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.

SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Create a Resume in Minutes

L Nikolaus

Lauren

Nikolaus

35839 Moen Cliff

Chicago

+1 (555) 741 0368

35839 Moen Cliff

Chicago

Phone

p +1 (555) 741 0368

Experience Experience

Phoenix, AZ

NDT Inspector

Phoenix, AZ

Beahan, Ernser and Adams

Phoenix, AZ

NDT Inspector

Cleaning of production parts which include degreasing or manual solvent cleaning
Reporting results of inspection to interested parties
Racking of production parts for cleaning and inspecting operations
Masking of production parts to protect certain surfaces from cleaning and inspecting operations
Reviewing and assimilating work instructions relating to racking, cleaning and masking operations
Managing flow of product through the area to meet with production demands
Advising regarding inspection solutions for new projects

Philadelphia, PA

Ndt-level, Inspector

Philadelphia, PA

Littel, Vandervort and Adams

Philadelphia, PA

Ndt-level, Inspector

Interpret drawings provided for customer specifications
Performing UT/PT/ET on products and interpreting results
Performing and certifying visual inspection of product
Participating in any root causes analyses of defects, process improvement initiatives or other tasks teams in support of company objectives
Maintaining department documentation such as UT/PT/ET reports, Calibration reports, Visual Inspection reports, Dimensional Inspection reports, NCRs (Non-conformance Reports), personnel qualification records, production reports and departmental metrics
Perform inspection as defined by the work instructions and any other instructions for the job assigned
Provide a detailed quality inspection of product using tools such as scales, micrometers, calipers and gages

present

Detroit, MI

LGI / NDT Inspector

Detroit, MI

Little and Sons

present

Detroit, MI

LGI / NDT Inspector

present

2) Distributing work among workers/Helpers, according to working program prepared by Field Supervisor
3) Responsible for doing the work in the right way
4) Responsible for personal safety among his working team
6) Responsible for ensuring that yard maintenance is conducted
9) Writing the technical reports for the inspection job carried out
7) Responsible for reviewing the Maintenance checklists periodically. Any maintenance requests or observations are investigate immediately
1) Doing all Inspection and Measurement jobs in the field

Education Education

Bachelor’s Degree in Engineering

Colorado State University

Bachelor’s Degree in Engineering

Skills Skills

Strong attention to detail, ability to multitask, good communications skills
Basic shop math, basic mechanical skills, effectively utilize lifting devices, ability to interpret
Ability to work alone or as a member of a team, good cooperative skills
Ability to read and interpret travelers and work instructions, ability to verify log and procedures for accuracy
Demonstrated ability to work effectively in a fast paced and ever-changing environment with multiple
General Standard education including the ability to read and write in English
Ability to lift and carry up to 50 lbs
1-2 years maintaining a Level II proficiency in at least one of the five certification for non-destructive testing of parts
Good communication skills
Ability to stand for prolonged periods with limited movement

Create a Resume in Minutes

13 NDT Inspector resume templates

Read our complete resume writing guides

NDT Inspector Resume Examples & Samples

Clean and process a variety of power plant parts through various baths and solutions to prepare them for inspection
Review work instructions, GSP requirements and blueprints
Inspect parts to see that they conform to metallurgical quality standards, using fluorescent penetrant, magnetic particle, X-ray, sonic, holography, eddy current and similar non-destructive inspection processes
Refer problems to leader/supervisor as appropriate to resolve difficulties
May be assigned to carry out tasks not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individual’s skills

NDT Inspector Resume Examples & Samples

Execute inspection on value class A components (Tower sections, flanges and steel plates)
Perform activities of position as outlined in Production Inspection Instructions
Operate material handling equipment, overhead crane and rigging, to fit-up and relocate tower section components
Perform daily maintenance inspections on equipment and correct minor issues
Coordinate with Team Leaders and other production employees to prioritize products to process
Work with assigned welding group to complete tasks as a team
Communicate quality and safety concerns with welding group and Team Lead
Shear Wave Testing experience required / Phased Array Testing preferred
Background as blacksmith, electrician, quality technician or the likewise
Knowledge of AWS D1.1 and European Standards
Previous UT testing on steel plates and weldments
2-5 years of experience within quality inspection
Documented training and experience hours signed by an NDT Level III in the following Non-Destructive Testing Methods: VT – Visual Testing, MT - Magnetic Particle Testing, and UT – Ultrasonic Testing. (Be prepared to show documentation of the above)
Minimum training/experience hours must meet or exceed the ASNT SNT-TC-1A requirements in the following methods/ levels
VT – Level II
(24 training hours / 210 minimum hours in method)
MT – Level II
(20 training hours / 280 minimum hours in method)
UT–Level II
(80 training hours / 840 minimum hours in method)
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions
Stand and or walk for periods up to 3 hours
Frequent heavy lifting of up to 75 pounds from floor to shoulder height
Use hand tools weighing up to 15 pounds
Kneel up to 30% of work time
Operate hand-held grinder up to 2 hours per day
Move wheel barrels up to 200 feet

LSV IAM Ndt Inspector Resume Examples & Samples

Reviews supplier’s certified test results. Make entries in computerized system to accept or reject product as appropriate. When required, can explain quality requirements of material inspected to DCMC or suppliers
Responsible for completing necessary paperwork and documentation in accordance with work instructions or procedures in a neat and organized manner
Employee is responsible for maintaining/improving housekeeping in his/her work area and adhering to established safety rules and practices
Must understand shop floor computerized time and attendance system and independently execute assigned responsibilities. Examples of those responsibilities are: clocking in and out upon arrival and departure from work, close shop order sequences when work is complete, acceptance transactions, input DMR data as required, etc
May be required to perform other inspection duties as qualified
Must have the knowledge and skill to set, use and read precision layout and measuring instruments
Must have the ability to read and interpret multi-paged complex blueprints
Must have good overall mechanical abilities
Level II Mag Particle (wet, dry) Level I Visual

NDT Inspector Resume Examples & Samples

Examine raw material, Machined parts and welds for defects such as cracks, porosity, and incomplete welds
Display competency in VT and PT inspection techniques
Read and interpret drawings and specifications verifying specified dimensions of parts or material
Test product for structural defects with multiple types of inspection including PT VT Hydrostatic leak testing
Intemperate on inspection findings in accordance with acceptance criteria and make technical recommendations
Document inspection results and report findings to Engineering and assist with technical evaluation of components to include life assessment
Train new inspectors to ASNT-TC-1A standards
Proof of Certification
Certified NDT Level 2 VT and PT inspector
Have documentation of training and experience
1-2 years relevant experience
Must be authorized to work in US

NDT Quality Inspector Resume Examples & Samples

Performs inspection duties utilizing engineering drawings and orders, route cards, inspection travelers technical specifications, QA procedures and instructions and other related documents
Reads and interprets complicated blueprints and specifications, including customer and vendor specifications. Evaluates and documents results
Performs nondestructive evaluations of metallic parts using Fluorescent Penetrant Inspection and X-ray
Prepares part specific techniques and work with Level 3 NDT program development
Performs daily checks of equipment used for nondestructive evaluations
Assists with selection and set-up of nondestructive equipment for nondestructive testing methods
Responsible for verification of cure data for bonded parts
Responsible for evaluating the receipt of materials to confirm material test reports meet specification requirements
Supports inspection of receiving, in-process and final inspection of parts, assemblies, accessories and materials for conformance to specifications
Helps identify causes of rejects and follows-through for corrective action
Performs product and process audits using basic auditing principles, procedures and techniques to evaluate our internal compliance to documented procedures
Provides feedback to engineering, manufacturing and suppliers as required
Minimum of five (5) years of aerospace inspection or quality experience
Minimum of three (3) years of experience as an NAS410, EN4179, or ISO 9712 qualified Level 2 inspector performing
A-scan and C-scan (air and water) inspection on carbon fiber laminates with complex geometry
Experience as a NAS410, EN4179, or ISO 9712 qualified Level 2 inspector for the following is a plus
Fluorescent penetrant inspection on aluminum, steel and titanium parts with smooth cast surfaces
X-ray inspection of braze joints
Current Powerplant certificate is a plus
Familiarity with CMM software such as Zeiss Calypso or FARO CAM2 a plus

Senior Inspector, Ndt-level Resume Examples & Samples

Responsible for Non-Destructive Testing (NDT) of aircraft and components
Record all inspection functions on applicable paperwork in accordance with the customer policies and procedures
Have the skills and knowledge to set up and standardize equipment, process parts, interpret and evaluate for acceptance or rejection, and document results
Be thoroughly familiar with the scope and limitations of the technique/method
Have the skills and knowledge to conduct system performance checks in accordance with the applicable process standard
Be capable of providing the necessary guidance and/or supervision to trainees as used by the employer
When specified in the written practice, be capable of developing work instructions form approved general procedures; such work instructions shall require final approval by a Level 3 certified in the method
Have basic knowledge of relevant product manufacturing and inspection technology
When specified in the written practice, have a basic knowledge of aircraft maintenance
Provide maintenance assistance to start or complete any required NDT inspections
Position requires a U.S. security clearance
ASNT Level II Certification or equivalent for three (3) or more applicable NDT disciplines
Two (2) years experience in Aircraft NDT
Current FAA issued Mechanic Certificate with Airframe License
Ability to correctly use one or more types of applicable equipment
Quality - Works accurately & meets quality requirements; questions errors & reports inconsistencies; follows processes & procedures
Dependability - Begins work on time adheres to planned schedule on the job; shows flexibility to meet deadlines; sets an example for others; completes tasks in appropriate time frame to meet company, team and individual goals
Training & Development - Has completed the required training; pro actively identifies new training & development opportunities; receptive to coaching & feedback
Integrity - Committed to passionately and consistently promoting a professional culture that is trustworthy, honest, socially responsible and where differences are respected and valued

NDT Inspector Resume Examples & Samples

Clean and process a variety of parts through various baths and solutions to prepare them for inspection
Inspect parts to see that they conform to metallurgical quality standards, using one or all of the following methods: fluorescent penetrant, magnetic particle, X-ray, sonic, holography, eddy current and similar non-destructive inspection processes
3 – 5 years of non-destructive testing, quality control or related experience
Must be able to read, write, speak and understand English
Training/Certification in SNT-TC-1A completed to Level I / Level II requirements preferred
Must have comprehensive knowledge of theory and practice of various non-destructive types of inspection processes and metallurgical testing knowledge
Job requires self-motivated individual who is able to adapt quickly to various job requirements

NDT Level, Inspector Resume Examples & Samples

Ultrasonic Testing (UT): Using standard ultrasonic equipment with compression and shear waves to test for thickness or flaws in materials and welds, or to check for disbonding or laminations
Adopt an Intertek “Marketing and Sales” attitude in all client, vendor, employee, and outside contacts interactions
Actively pursue continuing technical education courses or seminars

NDT Inspector Resume Examples & Samples

Training and/or education in Quality processes or its equivalent, including on the job training in NDT inspection techniques. Knowledge of KB and IRT Ultrasonic systems is preferred
Complete classroom theory, OFT and certification examination as required by Pratt & Whitney NDT qualifications
Responsible for signing off product inspected
Re-certification required at interval specified by Pratt & Whitney qualifications
Must perform daily walk around of equipment, maintain cleanliness of inspection area and be capable of troubleshooting equipment issues
Must be able to obtain NDT Certification within designated timeframe as required by Pratt & Whitney NDT qualifications

LGI / NDT Inspector Resume Examples & Samples

1) Doing all Inspection and Measurement jobs in the field
2) Distributing work among workers/Helpers, according to working program prepared by Field Supervisor
3) Responsible for doing the work in the right way
4) Responsible for personal safety among his working team
5) Responsible for Equipment's safety
6) Responsible for ensuring that yard maintenance is conducted
7) Responsible for reviewing the Maintenance checklists periodically. Any maintenance requests or observations are investigate immediately
8) Responsible for verifying all the requirements of a customer order as described in the work order have been met
9) Writing the technical reports for the inspection job carried out
10) Sending the reports to the customer after reviewing them
11) Commitment to HSE Policy, HSE rules, Instructions and Procedures
12) Report any hazards or risks, near miss cases and incidents immediately to his supervisor

NDT Inspector Resume Examples & Samples

Perform testing and analysis of various chemical solutions used in NDT
Calibrate and maintain calibration logs for NDT equipment
Interpret router and engineering print instructions as well as interpret and adhere to NDT specification requirements
Pull shop orders from designated staging areas and prep components for inspection (i.e. visually inspect, verify quantity, de-magnetize, clean, etc.)
Perform non-destructive tests on bearing components per internal NDT specifications/technique sheets as well as develop technique sheets when necessary
Evaluate components per specified acceptance criteria
Post-Clean/De-Magnetize/Lubricate components and move to designated outgoing material areas
Responsible for training and assisting in methods rated
Record all results of tests and evaluation of components in logs and on routers
Basic mathematical and mechanical skills are required
Level II certification achieved by meeting the minimum requirements set forth in IP 250
Strong attention to detail along with the ability to multi-task and coordinate work activities to be efficient and productive is required
Strong ability to follow written and prescribed work instructions/procedures and tasks
Strong ability to read and interpret specifications, acceptance criteria, and engineering drawings
A mastery of applicable skills/techniques must be demonstrated in order to achieve position progression
Vision protection, face shield, apron, gauntlets, nitrile gloves, safety shoes

NDT Inspector Resume Examples & Samples

3) The experience of reading and interpretation of design documentation, mechanical engineering drawings, specifications and procedures
4) Knowledge of welding process, terminology, technology of pipe lines, constructions of rig
1) The practical knowledge of production equipment and process, such as heat cutting, welding, heat treatment, nondestructive control, mechanical treatment, surface treatment and protective coating application
2) Computer skills at the level of the advanced user (the program package Microsoft Word, Excel, Outlook ) it's desirable AutoCAD и/или SolidWorks

NDT Inspector Resume Examples & Samples

Be certified to ASNT Level-II - UT, MT, PT & RT
Plus other certificates
Either Engineering or non-engineering background
Either College or highschool
Prefers Saudi National or with transferrable Iqama

NDT Inspector Resume Examples & Samples

Conduct tests to ensure quality or detect defects using, liquid penetrate, magnetic particle, and other nondestructive testing methods
Organize and report test results
Perform inspections only when the proper facilities, equipment, material, and technical publications are available
Report results of test following procedural instructions and site Quality Management system. Generate defective material reports as required

Level, NDT Inspector Resume Examples & Samples

High School/GED education at a minimum
Previous Military or industrial training/qualification/certification/experience must be documented to meet Level II requirements
As an option, this individual may have been a NDT Level I or NDT Trainee at OII-MSD to meet previous training/qualification/experience requirements
At a minimum, this individual will be certified, able to work independently, and proficient in the following methods: VT and PT
Additional certifications of other NDT methods preferred, i.e. MT, UT, RT, ET
NBPL certification a plus
Technical knowledge with submarine and/or surface combat ships recommended
Must have the ability to communicate effectively with personnel in and outside of the organization

NDT Inspector Resume Examples & Samples

Will be required to work Shifts (including Continentals and Nights)
Ultrasonic inspection of composite parts using manual and automatic scanning in accordance with approved techniques
Managing flow of product through the area to meet with production demands
Reporting results of inspection to interested parties
Compilation of part specific techniques in accordance with drawing, specified acceptance criteria and customer process specification requirements
Preparation for and participation in regular external NADCAP NDT audit
Re-certification of reference test pieces
Maintenance of inspection records and technique sheets
Advising regarding inspection solutions for new projects
On the job and class room training will be required, including examinations
Apprentice served or significant Manufacturing and/or Operation experience
Level 2 NDT Certification
Experience interacting with groups/people
Numerically competent
Comfortable working with computers
Able to pass eye test (aided or unaided) including near vision and color perception
Able to pass hearing test
Self-motivated with a good level of initiative

NDT Inspector Level Resume Examples & Samples

Conduct testing to ensure quality and detection of discontinuities (defects) per customer and internal spefications or standards using NDT methods of inspection
Establish techniques for proper examination of components, ensuring strict adherence to procedural guidelines, acceptance requirements and safety regulations
Interpret discontinuities/defects using customer acceptance criteria, internal procedural techniques and various inspection tools
May instruct and supervise others
Certified Level II NDT (PT/MT) Technician
Good knowledge and understanding of material and manufacturing processes in relation to NDT technology
Good knowledge of common inspection measuring equipment including, but not limited to, thread guages, micrometers, digital thickness gauges, measuring tapes and rulers
Basic English language reading/writing, Basic use of math and PC skills, including Microsoft Office (Word, Excel)
Ability to use Syteline/ESI or other ERP systems upon instruction
Good organizational and time management skills
Ability to professionally document and communicate work instructions and inspection data
Attention to detail and good manual dexterity
Ability to read, follow detailed instructions and interpret complex manufacturing drawings and quality specifications/requirements
Willingness to work cooperatively with others and to train other candidates for NDT certification
Able to maintain a high level of productivity with focus on efficiency, maximum use of time and materials in a fast paced quality driven environment

NDT / FPI Inspector Resume Examples & Samples

Performs routine checks, tests, gauging and instrument inspections of materials, parts in process and finished parts
Performs routine tests on materials, goods in process or finished goods where results are compared with company quality standards
Performs visual inspection for obvious defects
Records results on inspection forms or charts and reports number of defects found
Required to inspect parts using fluorescent penetrant and black light to find defects
Some lifting of items of various weights, both assisted and unassisted
Experience in understanding of non-destructive validation methodology (visual, penetrant, etc)
Drive standardized continuous improvement metrics across the FPI disciplines
Blueprint Reading/customer requirements flow down
Understanding of Regulatory requirements
Must be able to become certified Level II FPI Inspector
Must be able to read and interpret operation sheets and follow complex instructions and/or directions
Ability to communicate with all levels within the organization
Ability to read & react to verbal and non-verbal communication while maintaining complete professionalism
Must be able to lift up to 40lbs unassisted on occasion
Must have unrestricted authorization to work in the U.S

Ndt-level, Inspector Resume Examples & Samples

Inspect materials or parts in accordance with the procedures and instructions set forth in order to ensure that the products or services meet the requirements of SXP Specifications and the Customer
Interpret drawings provided for customer specifications
Follow all company policies, rules and procedures
Follow the directions of the supervisors, foreman and lead man regarding the position duties and priorities
Accurately interpret specifications, engineering drawings and work instructions for product being inspected
Perform inspection as defined by the work instructions and any other instructions for the job assigned
Responsible for the use and basic care of calibrated inspection, measuring and testing equipment and devices in the verification and evaluation of product
Provide a detailed quality inspection of product using tools such as scales, micrometers, calipers and gages
Accurately complete paperwork for quality tracking
Notify and involve the supervisor of any problems or issues that arise during production
Responsible for identifying nonconforming product and initiating Non-Conformance Reports (NCR’s) as needed for product not meeting standards set
Keep work area in an organized and safe condition in compliance with 5S standards
Participate in the completion of daily Preventative Maintenance Program
Knowledge of and strict adherence to the lock out tag out program
Safely operating equipment and machine tools
Know and comply with all safety rules, regulations and policies
Attend all company required safety meetings/training
Performing UT/PT/ET on products and interpreting results
Performing and certifying visual inspection of product
Performing dimensional inspection of products as needed
Maintaining department documentation such as UT/PT/ET reports, Calibration reports, Visual Inspection reports, Dimensional Inspection reports, NCRs (Non-conformance Reports), personnel qualification records, production reports and departmental metrics
Notifying Supervisor or others as instructed of any defects or other anomalies
Participating in any root causes analyses of defects, process improvement initiatives or other tasks teams in support of company objectives
Associate's degree (A. A.) or equivalent from two-year college or technical school
Six months to one year related experience and/or training; or equivalent combination of education and experience
Ability to work flexible hours as required, including weekends and holidays
Computer skills, including Microsoft office

NDT Inspector Resume Examples & Samples

Set up and calibrate equipment
Conduct routine nondestructive examinations for medical devices and related equipment using various type of nondestructive testing processes Maintain records of all testing
Read and interpret indications, and evaluate them with reference to applicable codes and specifications
Organize and report NDT results
Exercise assigned responsibility for on-the-job training of less qualified personnel
Communicates with other cell members and engineers concerning product defects
Thoroughly familiar with the scope and limitations of the inspection method
Able to develop detailed inspection techniques on products and items within the limits of his qualifications
Must be able to read and understand blueprints
Must be able to communicate technical information, both verbal and written
Must be able to life in the 50 pound range
Must be a certified NDT II Inspector, 80 hours formal training plus 840 hour OJT. (Liquid Penetrant Inspection 12 hour formal training plus 240 hours OJT)
Must be certified for the specific type of inspection and for the products

NDT Inspector Resume Examples & Samples

Work from process travelers and operation sheets to perform Fluorescent Penetrant Inspection (FPI), Magnetic Particle Inspection (MPI), X-Ray (RT), Ultrasonic (UT), and Eddy Current (ET) on aircraft parts to locate and determine the severity of discontinuities
Apply proper agents such as cleaners, penetrants and developers, etc. to part to prepare of testing
Perform testing operations following specific procedures outlined in manuals, identifying and marking discontinuities. Complete all required paperwork, records and sign-offs
Interpret results of various tests performed against the acceptance criteria specified in overhaul manual or other approved data and accept or reject parts based on specified criteria
Perform nital etch and swab etch. Perform visual inspection of braze, nital etching and swab etching
Inspect internal cavities of components using specialized boroscopes
Ensure regular maintenance of equipment. Ensure all gauging and equipment is in properly calibrated
Detect faulty operations and materials and report these and other problems to immediate supervisor
Comply with all company and safety rules and regulations
In addition to heat treat duties, cross training will be required to learn and perform other duties as necessary
Provide training to others as required
1-2 years maintaining a Level II proficiency in at least one of the five certification for non-destructive testing of parts
Basic shop math, basic mechanical skills, effectively utilize lifting devices, ability to interpret
Ability to read and interpret travelers and work instructions, ability to verify log and procedures for accuracy
Strong attention to detail, ability to multitask, good communications skills

NDT Inspector Resume Examples & Samples

Operate radiographic inspection equipment (such as X-ray or laser shearography) and perform non-destructive inspections using that equipment
Perform liquid dye penetrant inspections
Interpret and report results of inspections in accordance with organizational procedures
Determine conformance to accepted specifications
ASNT Level 1 Radiographer Certification is preferred but not required. Level 2 or Level 3 certification considered an advantage
ASNT Level 2 liquid dye penetrant inspection or higher required. Level 3 certification considered an advantage
Must be able to bend, stoop & lift up to 25 pounds

NDT Quality Inspector Resume Examples & Samples

Works closely with Project Engineering, Quality Engineering and Manufacturing to ensure that all manufacturing and inspection activities are performed in compliance with process work documents
Performs in process inspections to ensure compliance with all requirements
Maintains records, verifies the effective implementation of the Quality Program and acts as a quality representative during internal, customer and regulatory audits
Performs in-coming inspections for all raw materials/components/castings received in the plant before they can be released for process/production operations
Insures in-process inspections are completed per engineering specifications during the production process
Formally investigates and validates or rejects the inspected parts in compliance with engineering specifications
Scraps inspected parts if they do not meet specifications
Performs non-destructive testing, including ultrasonic, dye penetrant, radiographic, visual, magnetic particle
Performs mechanical, visual and dimensional inspections of parts
High school graduate or equivalent plus two (2) years college or technical school or equivalent
4-6 years of NDT Quality Inspection experience
Certification in non-destructive testing in accordance with SNT-TC-1 A
Required Levels of Qualification: NDE level II in UT shear wave and /or RT Gamma/X-ray
NDE Level II in VT, PT, MT is a plus
Inspectors qualified to Level II will assist inspectors of lesser qualifications as required

NDT Inspector Resume Examples & Samples

Reviewing and assimilating work instructions relating to racking, cleaning and masking operations
Perform receiving inspections (before processing) as needed and immediately report any damage or discrepancy
Gathers supplies such as racks, tooling, baskets, carts (etc)
Masking of production parts to protect certain surfaces from cleaning and inspecting operations
Racking of production parts for cleaning and inspecting operations
Cleaning of production parts which include degreasing or manual solvent cleaning
Will require use of personal protective equipment (PPE) during certain tasks (goggles, safety glasses, aprons, boots, gloves, hearing protection, etc) and be expected to comply with safety directives and policy
Will be exposed to chemicals/solvents and occasional fumes, wet/humid conditions, low-level lighting, and moderate noise level
Will at times require heavy lifting or use of mechanical hoist for the aid in lifting objects
Work closely with inspectors and area leadership to complete work and prioritize tasks
Clean, organize and maintain work area as prescribed by supervision
Complete documentation, counting of production parts, computer scanning, package to protect and transport, and other assigned tasks
Basic mathematic skills: add, subtract, multiply and divide using whole numbers, common fractions and decimals
Ability to read, write and communicate in English. Specifically, applicants must be able to read and understand written procedures and instructions
Demonstrated ability to work effectively in a fast paced and ever-changing environment with multiple