Mechanical Engineer Design Resume Samples
4.5
(117 votes) for
Mechanical Engineer Design Resume Samples
The Guide To Resume Tailoring
Guide the recruiter to the conclusion that you are the best candidate for the mechanical engineer design job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.
Craft your perfect resume by picking job responsibilities written by professional recruiters
Pick from the thousands of curated job responsibilities used by the leading companies
Tailor your resume & cover letter with wording that best fits for each job you apply
Resume Builder
Create a Resume in Minutes with Professional Resume Templates
CHOOSE THE BEST TEMPLATE
- Choose from 15 Leading Templates. No need to think about design details.
USE PRE-WRITTEN BULLET POINTS
- Select from thousands of pre-written bullet points.
SAVE YOUR DOCUMENTS IN PDF FILES
- Instantly download in PDF format or share a custom link.
JB
J Brakus
Josefina
Brakus
2799 Rosenbaum Flats
New York
NY
+1 (555) 240 0504
2799 Rosenbaum Flats
New York
NY
Phone
p
+1 (555) 240 0504
Experience
Experience
New York, NY
Mechanical Engineer Gear Design
New York, NY
Hermiston-Ullrich
New York, NY
Mechanical Engineer Gear Design
- Develop design and analysis documentation, e.g. specifications, design practices, site work instructions, certification document
- Self-motivated, working independently under high pressure to make delivery within timeline
- Fluent English (written & verbal) for working in a global team. Self-motivated
- Conduct site failure analysis and develop up-tower retrofit solution
- Manage product through the life cycle and maintain quality of drawings, BoM and specifications
- Deliver gear macro geometry, strength evaluation and tooth modification proposal for gearbox development by using advanced calculation program/software
- Lead design activities for wind turbine component gearbox development, including main gearbox, pitch and yaw gearbox
Boston, MA
Design & Development Mechanical Engineer
Boston, MA
Torp and Sons
Boston, MA
Design & Development Mechanical Engineer
- Conduct effective design reviews to share your work and gather feedback for alternatives and improvements
- Design component and assembly concepts, identification of cost reduction and product improvement opportunities
- Create 3D models of new mechanical components and assemblies
- Work with other engineers to ensure that thorough engineering analyses have been completed and risks to cost, quality and delivery have been identified
- Assemble functional and aesthetically accurate prototypes for review with senior management
- Work closely with our purchasing team and vendors to source and quality production tooling
- Rapidly iterate through the design process to arrive at a solutions that meets cost and quality objectives while meeting key product specifications
present
Los Angeles, CA
Mechanical Ground Support Equipment Design Engineer
Los Angeles, CA
McKenzie, Bashirian and Borer
present
Los Angeles, CA
Mechanical Ground Support Equipment Design Engineer
present
- All phases of manufacturing, assembly and test of spacecraft and manned / autonomous aircraft
- Designing, developing and implementing testing methods and equipment in multiple tests
- Analyze hardware configuration and processing solutions
- Test hardware conformance to specifications
- Generate 2D/3D layouts of mechanical support equipment
- Support metal fabrication using standard techniques
- Design and oversee the fabrication, installation, modification, maintenance, and repair of mechanical equipment such as: conveyor systems, production machinery, and other material-handling equipment used in fabrication, assembly, and other production functions
Education
Education
Bachelor’s Degree in Mechanical Engineering
Bachelor’s Degree in Mechanical Engineering
California State University, Los Angeles
Bachelor’s Degree in Mechanical Engineering
Skills
Skills
- Excellent interpersonal and organization skills in conjunction with excellent written and oral communication capabilities
- Proficiency with 3D CAD design packages, like Solidworks/Inventor and Autocad
- Familiarity with Zemax and basic optical design highly desired
- Ability to perform multi-disciplinary trade studies to evaluate configuration alternatives for functional and spatial integration
- Experience in thermal management and fluid dynamics of cooled cameras and vacuum chambers is highly desired
- Experience with Finite element analysis tools for predicting thermo-mechanical stability, like Ansys/FEMAP
- Experience with structural analysis of large moving structures
- Experience with the mechanical tolerance of optical systems (mechanical, optical, thermal)
- Experience with opto-mechanical design of optical systems and optical component assemblies
- Mechanical expertise recognized and sought after by those outside the business
15 Mechanical Engineer Design resume templates
Read our complete resume writing guides
1
Mechanical Engineer Gearbox Design Resume Examples & Samples
- Lead project execution for wind turbine gearbox development, site issue solving and manufacture/sourcing activity support
- Coordinate with cross-functional teams, suppliers and/or partners to make sure the components well fit the project needs
- Manage the product through the life cycle, including drawing, BoM and specification creation and revise. Ensure engineering quality and on-time delivery
- Drive the cost reduction initiation and implementation through the design activity
- Support to obtain the required certifications by working with GE internal and external teams
- Design of validation tests and support data analysis to optimize the design
- Development and maintain engineering documentation, e.g. drawing, specifications, design practices, BoM, on-site working instructions, deign practice etc
- Support drivetrain design of wind turbine machine head system
- 5+ years’ experience of mechanical design
- Thorough knowledge of ISO/ DIN/AGMA codes and standards in wind industry
- Knowledge of mechanical manufacture process, including heat treatment, machining and coating
- Knowledge of FMEA, should cost analysis and reliability analysis
- Fluent English (written & verbal) for working in a global team. Self-motivated
- MS+ advanced degree in Engineering
- Working experience in gear design and gearbox site issue solving in wind industry
- Familiar with bearing selection, rating and typical failure modes for industry applications
- Working experience in drivetrain systematic design and drivetrain dynamic analysis
2
Mechanical System Design & Analysis Engineer Resume Examples & Samples
- Develops, integrates documents mechanical, fluid, thermal environmental requirements, designs, develops, maintains using modeling tools to create innovative product definitions across the business and to other businesses that may benefit
- Manages a fast cycle program going from concept to PDR/CDR/hardware/build/flight test and the build/test of the prototype
- Leads the development, maintenance or modification of system components' designs/proposals to provide installation and detail documentation, to provide product definition from drawing to prototype hardware build/test and work other engineering groups as well as with suppliers/vendors
- Capable of working effectively with supplier technical team in assessing product/system issues or designs
- Trains and coaches others
- Works under minimal direction
- Complete knowledge of mechanical component and system design, analysis, and integration and knowledge of the tools required for design, analysis, evaluation, and integration (i.e. CATIA, SolidWorks or other computer aided design systems, mathematical modeling software, tolerance analysis software) and has full knowledge in troubleshooting of new designs
- Excellent interpersonal and organization skills in conjunction with excellent written and oral communication capabilities
- Targets important areas for innovation and develops solutions that address meaningful issues in own work areas and thought the organization
- Makes customers and their needs a primary focus of one's actions; responds quickly to meet customer needs and resolve problems
- Ability to perform multi-disciplinary trade studies to evaluate configuration alternatives for functional and spatial integration
- Complete knowledge of project and supplier techniques (e.g., design reviews, schedule reviews, production readiness) required for the management of the supplier's technical activities (e.g., design, development, test)
- The ability to develop technical requirements and evaluate supplier performance as related to those requirements
- The ability to distinguish between requirements and objectives and to balance between those requirements and the supplier's capabilities and limitations
- Understanding of integrated thermal and dynamic structural analyses
- Deep experience designing Kill Vehicles and related support systems
- Mechanical expertise recognized and sought after by those outside the business
3
Mechanical Integration Design Engineer Resume Examples & Samples
- Familiar with electronic packaging and mechanical sub-system design using CATIA and/or Creo/Windchill
- 3 years relevant mechanical design and product development experience
- Project management experience and ability to design & collaborate with large cross-functional teams as well as excellent communication skills
- An M.S. or Ph.D with with relevant mechanical design and product development experience
- Ability to work with a group of peers, as well as leadership, and communication skills are required
4
Mechanical Ground Support Equipment Design Engineer Resume Examples & Samples
- B.S. degree in STEM discipline plus 5 years of experience in mechanical design, or M.S. degree with 3 years of experience in mechanical design
- Familiarity with Geometric Dimensioning and Tolerancing (GD&T)
- Ability to perform basic stress analysis (classical/hand analysis); finite element analysis experience is a plus
- Active SCI/SSBI or TS/SSBI security clearance
- Previous experience in MGSE design, fabrication support and proof load testing
- Welded structure design experience
- Experience using CATIA V5 for 3-D modeling and drawing generation
- Experience with Patran/Nastran and MathCAD
5
Mechanical Ground Support Equipment Design Engineer Resume Examples & Samples
- Previous experience in MGSE design, fabrication and proof load testing
- Experience designing welded structures
- Active SCI/SSBI security clearance
- Experience with design of pneumatic systems is a plus
6
Mechanical System Design & Analysis Engineer Resume Examples & Samples
- Work directly with customers to develop / analyze mechanical system requirements
- Develop and/or modify existing system designs
- Coordinate with suppliers and customers
- Perform system requirements verification testing
- Resolve product integration issues and production anomalies
- Research basic technologies for potential application to program needs
- Experience with opto-mechanical design of optical systems and optical component assemblies
- Experience with the mechanical tolerance of optical systems (mechanical, optical, thermal)
- Experience with Finite element analysis tools for predicting thermo-mechanical stability, like Ansys/FEMAP
- Familiarity with Zemax and basic optical design highly desired
- Experience in thermal management and fluid dynamics of cooled cameras and vacuum chambers is highly desired
- Experience guiding and mentoring less experienced employees
- Applicants must have good communication, analytical, and organizational skills and be able to work in a team environment
7
Mechanical Chief Design Engineer Resume Examples & Samples
- Develop capability
- Gather and share know-how of technology
- Provide practical rules for efficient use of tools
- Provide support for engineers
- Create performance improvement ideas
- Take development actions
- Create proposals for design guidelines
- Manage component library
8
Mechanical Engineer Design Resume Examples & Samples
- Working in a team environment supporting new product development and stabilization efforts
- Demonstrating a high level of innovation and initiative in identifying, responding to, and resolving new product and process development issues
- Documentation of experiment and project results using specified formats and data storage systems
- Communicating effectively with management, coworkers, and suppliers
- Designing and implementing efficient experiments and test methods
- Resolving technical issues associated with components, parts, raw materials, and instrumentation
- Testing prototypes for quality and performance characteristics
- Design fixture, hardware, and other components to complete experiments
- Authorized to work in United States
- Attending college for engineering degree (mechanical, electrical, chemical) or equivalent degree
- Hands on, demonstrated ability to complete experiments and modify hardware
- Ability to work with engineers, technicians, and other disciplines across groups and departments
- Good communication skills in writing and speaking
- Self-starter and strong initiative
- Candidates should have completed their junior year by the time they begin internship Summer of 2017
- Experience with controllers, debugging systems, programming devices
- Enthusiastic learner and creative thinker
9
Mechanical Engineer Calculation & Design Resume Examples & Samples
- Perform structural-mechanical analyses with the help of FE simulations
- Oversee mechanical and thermal design of traction converters
- Contribute to the definition and validation of calculation and evaluation concepts
- Conduct mechanical engineering and design of drives/converters
- Optimize product range by simplifying support structures, streamlining production costs, and reducing weight
- Carry out validation tests in vibration laboratory
10
Mechanical Engineer Gear Design Resume Examples & Samples
- Lead design activities for wind turbine component gearbox development, including main gearbox, pitch and yaw gearbox
- Deliver gear macro geometry, strength evaluation and tooth modification proposal for gearbox development by using advanced calculation program/software
- Manage product through the life cycle and maintain quality of drawings, BoM and specifications
- Design of gearbox validation tests and implementation data analysis to optimize the gear design
- Develop design and analysis documentation, e.g. specifications, design practices, site work instructions, certification document
- Conduct site failure analysis and develop up-tower retrofit solution
- Optimize gearbox design
- Identify cost saving ideas, drive the production cost reduction initiation and implementation
- Support sourcing and manufacturing activities related to gear design
- BS+ degree or equivalent working experience in mechanical engineering
- 3 years’ experience in gear design in power generation/heavy machine/vehicle industry
- Knowledge on forging manufacture, heat treatment and gear machining process
- Self-motivated, working independently under high pressure to make delivery within timeline
- Team work, good communication and influencing skills with cross-functional teams
- Frequent domestic short travels applicable
- Great team working spirit and good communication / influencing skills
- MS+ in Mechanical Engineering
- 6-Sigma GB certified (GE internal)
- Experience in gearbox design for wind industrial application
- Familiar with typical gearbox failure mode
- Experience in product manufacturing, field failure analysis or application engineering
11
Mechanical Controls Design Engineer Resume Examples & Samples
- Perform engineering tasks related to chassis mechanical controls system design & development
- Mechanical controls include shift by wire, shifters, shifter cables, accelerator pedals and brake pedals
- Design, test and development planning, data analysis, report writing, engineering drawing checking, project management, supplier management, and plant visits.May include the following
- Conduct research to develop, plan, and design new or improved schedules, processes, products or systems
- Develop quality improvement strategies, systems and processes and coordinate testing of products or equipment
- Devise processes and procedures for manufacturing operations
- Schedule and plan work to meet completion dates and technical specifications
- Draft, review, and revise blueprints or engineering specifications
- Collect and analyze data and prepare written reports on findings and conclusions
- Coordinate component supplier activities
- May include project management
- Bachelor of Science in Mechanical Engineering required
12
Design Engineer for Mechanical Transmission System Resume Examples & Samples
- Experience in design of mechanical transmission system for industry
- Experience in railway industry is an advantage
- Knowledge in design and calculation for gears, bearings, oil lubrication circuit
- Good capacity of synthesis
- Good communication
13
Mechanical Plant Design Engineer Resume Examples & Samples
- Reviews and approves detailed design calculation such as process line sizing, piping and manual valve specification, safety relief valve sizing, pressure drop calculations and pipe stress analysis
- Approves fabrication drawings and other construction submittals for conformance to engineering direction, specifications and makes design recommendations
- Has extensive breadth and depth of knowledge in the field of pipe engineering and working knowledge of other fields related to plant design
- Serves as a consultant to others, providing technical information and engineering recommendations that assist with various projects and training purposes
- Makes technical decisions based on full awareness of viability, cost and other benefits
- Maintains a thorough knowledge of Praxair standards, guidelines, safety and operability best practices and industry standards
- Is innovative in developing, selecting and implementing engineering techniques and solutions to solve difficult problems; anticipates problems and develops contingencies
- Provides technical and engineering support to other Praxair regions and/or plants
- BS in Mechanical Engineering with a minimum of 5-10 years’ experience in mechanical plant and piping design
- Knowledge of design Codes and Standards, including ASME, ASTM, ANSI and API
- Knowledge, application and specification of piping materials
- Excellent writing skills and interpersonal skills
- Ability to meet schedule deadlines
- Willingness to travel up to 10% of the time to support project tasks and construction
- Mechanical Professional Engineering license a plus
14
Mechanical Engineer Piping & Pressure Vessel Design Resume Examples & Samples
- Executing design work to meet project goals and team KPI's (Key Performance Indicators)
- Managing assigned design resources
- Having a thorough knowledge of Praxair standards and guidelines
- Having a working knowledge of ASME pressure vessel and B31.3 piping code
- Performing design calculations
- Providing technical support for field repairs
- Reviewing project specific drawings to ensure compliance with design criteria and standards
- Providing engineering support to Praxair regions and/or plants
15
Mechanical Engineer, Interconnection Design Resume Examples & Samples
- Work from requirements to develop unit design concepts and perform design trades
- Complete detailed layouts and design documentation using Computer Aided Design tools
- Travel extensively both domestic and international
- Two (2)+ years of related experience
- Experience in electronics packaging design
- Experience in designing electronics products, starting with requirements through the release of a design
- Expertise in CAD modeling tools
- Knowledge of electronics enclosures / chassis for military and aerospace environments
- Expertise in connector and wire selection for military and aerospace environments
- Experience in cable design preferred
- Creo / ProE experience preferred
- Ability to travel extensively both domestic and international
- Bachelor’s Degree in Mechanical, Electrical Engineering or other related discipline
16
Mechanical System Design & Analysis Engineer Resume Examples & Samples
- 3+ years experience with mechanical systems design and analysis
- Proficiency with 3D CAD design packages, like Solidworks, Inventor and AutoCAD
- Experience working with customers and suppliers
- Experience with opto-mechanical design and mechanical tolerancing of optical systems and optical component assemblies is highly desired
17
Mechanical System Design & Analysis Engineer Resume Examples & Samples
- Experience with PRO-E (CREO)
- Experience working in a Purge, Vent, and Hazardous Gas IPT environment
- Experience with Data Management Systems including APDM and/or EDRS
- 3+ years experience with Mechanical Systems Design & Analysis
18
Design Engineer, Hydro Mechanical Resume Examples & Samples
- Review customer requirements for understanding with the intention of providing solutions to dynamic pumping elements, such as centrifugal pumps, inducers, side-channel pumps, and jet pumps
- Create internal system requirements specification from customer requirements including listings of assumptions to be discussed with further customer contact
- Generate and perform relevant hydraulic design and analyses with respect to dynamic pumping systems
- Support CFD analyses
- Lead engineering trade studies and analysis relevant to dynamic pumping technologies
- Perform detailed design analyses and present results to customers in support of design reviews. Analyses include performance and load predictions
- Troubleshoot fluid systems
- Support generation of test plans for pumping technology development
19
Mechanical Tooling Design Engineer Resume Examples & Samples
- Designs engineering solutions for mechanical and thermal hardware, electronics enclosures, and test tooling based on
- Develops collaborative relationship with internal and outsourced development partners on mechanical design and
- Minimum 3-5 years’ experience
- Experience or understanding of SolidWorks or Creo (3D CAD software) and 2D drawings as mechanical design tools
- Working across multi-discipline teams and recommending ME discipline process improvements
- Contributing to engineering analysis and judgment that support tradeoff decisions
20
Mechanical Equipment Design Engineer Resume Examples & Samples
- BS degree in STEM (Science, Technology, Engineering, Math), plus a 5 years of engineering experience OR MS degree in STEM plus 3 years engineering experience
- Fundamental knowledge in aerodynamics
- Minimum 3 years experience with CAD tools (Unigraphics, NX or CATIA V5)
- Knowledgeable in machining and fabrication practices
- Current active DOD secret security clearance
- Ability to attain SAP accessibility required
- Knowledge with wind tunnel operations and the methodology and the use of aero-science test hardware such as force and moment balances, dynamic pressure flow systems, and variety of test measuring instrumentations a plus
- Experience using CAD tools for geometric surfacing
- Experience as shop liaison including hands-on shop and test support
21
Mechanical System Integration & Design Engineer Resume Examples & Samples
- Deliver the design, drawings, schematics, prototype, SW module delegated to, as per Work Package description
- Manage version control of various iterations if necessary
- Decide, specify which analysis have to be performed and monitor the execution of it
- Draw conclusions / recommendations based on the analysis performed
- Ensure testing and validation of the delegated Work package is performed
- Gather and maintain all necessary documentation related to the delegated Work Package
- Be focal point within TAE with other organizations involved in the programme (Programmes, Operations, Services, ….) for the planning tasks
- Educated to degree level in Engineering
- Experience in Design (structures or systems) 3-5 years
- Advanced user of CATIA
- Experience in Derivatives and Airbus documentation will be a plus
- Spanish & English advanced
- Team Spirit & be able to delegate
22
Mechanical Equipment Design Engineer Resume Examples & Samples
- Designing, developing and implementing testing methods and equipment in multiple tests
- Gather test requirements and developing test plans
- Test hardware conformance to specifications
- Design and oversee the fabrication, installation, modification, maintenance, and repair of mechanical equipment such as: conveyor systems, production machinery, and other material-handling equipment used in fabrication, assembly, and other production functions
- Analyze engineering sketches, specifications and related data, and drawings to determine design factors such as size, shape, and arrangement of parts
- Bachelor’s Degree in STEM (Science, Technology, Engineering or Math) plus 2 years of Mechanical Engineering experience OR Master’s Degree in STEM plus 0 years of Mechanical Engineering experience
- Active, in-scope Top Secret clearance OR an SSBI investigation completed within the past 5 years OR current SCI access
- Experience using CAD (NX, CATIA V5, ProE, SolidWorks, AutoCAD) for mechanical design
- Test & Integration Experience
- Past experience using CATIA V5 for 3-D modeling and drawing generation
- Active SCI security clearance
- Experience communicating / presenting to all levels of the organization and program customers
23
Mechanical Engineer / Thermal Design Resume Examples & Samples
- BS or MS degree in Mechanical Engineering or Aerospace Engineering, or related field
- Thermal analysis experience in the aerospace industry
- Experience with thermal design of assembly systems, subsystems, and components. Demonstrated strength in thermal analysis with a desire to learn more and demonstrated strong problem solving and analytical skills. Proficiency with standard thermal software (NX Thermal//Flow). Experience performing heat transfer analysis
- Experience with Microsoft Office (i.e. Excel, Word, and PowerPoint). Excellent writing and verbal communication skills for generating thermal plans, thermal analysis reports, documentation, and potentially proposals are necessary
- Candidate must have the ability to travel
- Experience with CAD modeling using PTC CREO, FORTRAN programming, and Siemens NX Thermal modeling. Experience with Matlab and MathCAD
- Proven leadership with demonstrated interpersonal skills
- Creativity/innovation to solve issues related to thermal design performance of any aspect of thermal systems. Experience developing and analyzing in thermal design of thermal management systems. Experience calculating internal and external convection coefficients of simple and complex geometries and being able to research literature when necessary
- Experience writing environmental and component specifications, and system/subsystem/component test plans
- Capable of performing in a fast paced, dynamic environment, and working in an inclusive, team environment
24
Mechanical Engineer / Design Analysis Resume Examples & Samples
- Review requirements for functionality, manufacturability (Design for Manufacturability and Assembly), and cost
- Analyze proposed mechanical designs relative to Bose Corporation’s requirements and make recommendations to improve their performance
- Documenting the analysis results for customers in a clear and precise way (internal)
- Conduct testing to validate models
- Parametric solid modeling CAD tools (preferably NX)
- Familiar with linear and non-linear based FEM/FEA tools (like NX Nastran, ABAQUS or ANSYS)
- Experience with other design/analysis capabilities to meet Structural, Shock and Vibration requirements is desired
- Strong fundamental understanding of mechanical design and validation
- Experience with hands on testing and working with other testing and reliability groups to provide directions and verify functional requirements is important
25
Mechanical / System Design Engineer Resume Examples & Samples
- Education: B.S. in Mechanical Engineering, Physics or equivalent
- 3 to 10 years of experience in one of the following: mechanical engineering, system engineering, reliability
- Ability to travel to Israel on as-needed base
- Ability to attend early morning meetings (7:00 AM are common each week)
26
Engineer Iv-mechanical & Structural Design Analyst Resume Examples & Samples
- Must be able to travel to support position requirements. This may include travel to and from customer location, which may involve airline travel. In some cases, accommodations can be made for POV, if necessary
- Must comply with all “drug free workplace” requirements as mandated by directives issued by the appropriate federal contracting officer and the company, which requires drug testing for use of illegal drugs by employees in sensitive positions
- Must maintain a positive work atmosphere by behaving and communicating in a manner that fosters good relations with customers, clients, co-workers, and management
- Knowledge of industry codes and standards, STAAD structural modeling or Finite Element Analysis (FEA) is required
- Ability to perform complex had calculations is required
27
Mechanical Engineer R&D Design Resume Examples & Samples
- Participation in product and technology projects, with mechanical responsibility
- Participation in cross-functional project teams to ensure integrated product development
- Mechanical concept design in 3D CAD and 2D documentation of the final solution
- Supplier cooperation to ensure cost and quality optimised design of moulded plastic parts, sheet metal and extruded aluminum parts
- Design of enclosures for different IP and Nema ratings and for different vibration levels
28
Mechanical Sustaining & Design Engineer Resume Examples & Samples
- Conduct assignments, generally involving large high profile projects and/or multiple projects
- Assists with tasks that will include product design, quality, materials, purchasing, assembly, and inventory planning
- Plans, directs and coordinates responsibilities of staff and functions to meet department goals
- Responsible for initiating and coordinating corrective actions defined within area of responsibilities
- Check and verify assembly or component drawings to ensure they conform to BHI-C&P standards
- Coach lower level engineers and assists in management of projects
- Identify problems and propose solutions
- Assign drawing numbers in envision and work with Tech Services group to implement drawings into Service Units
- Bachelor's Degree in Mechanical Engineering with 3+ years of mechanical design experience or Master's Degree in Mechanical Engineering and 2+ years of mechanical design experience
- Advanced problem solving and project management skills
- Proficient with 3D CAD
- Able to work independently and on teams; sound decision making ability
- Able to efficiently and effectively communicate with internal/external customers, vendors and stakeholders
- Conduct or supervise qualification testing of equipment in test lab or at test well in accordance with industry guidelines
- Advise the applications engineering group, technology group and potential customers on the technical issues that affect the installation of C&P products and/or services
- Experience designing completions equipment
- Can draft Technical Manual Documentation
- Solidworks Expertise
- Familiarity with FEA
- Familiar with the DMAIC process and or Six Sigma
29
Mechanical & Structural Design Engineer Resume Examples & Samples
- Should have expertise in relevant engineering standards like ANSI for mechanical & electrical design. Demonstrated understanding of test systems and good engineering judgment when solving complex problems
- Exposure to machine shop tools and processes
- Comprehensive knowledge of aerospace regulations (e.g. FAA, MIL) on the certification of test articles/airplanes to assure compliance of design
- Candidate must be a self-starter with a positive attitude, high ethics, and a track record of working successfully under pressure in a time-constrained environment
- Must be able to work collaboratively with cross-functional teams within Boeing and external partners
- Develop and maintain relationships / partnerships with customers, stakeholders, peers, and partners to develop collaborative plans and execute on projects
- Must have experience leading teams and have the ability to mentor and teach juniors and partners to accomplish project and departmental goals and objectives
- Awareness of AS9100 or ISO9001 quality management system. Internal auditor certification would be a added advantage. Proactively seek information and direction to successfully complete the statement of work
- Awareness of AS9100 or ISO9001 quality management system. Internal auditor certification would be a added advantage
- All information provided will be checked and may be verified. This requisition is for an international, locally hired position. Candidates must be legally authorized to work in India. Boeing will not seek immigration and labor sponsorship for any applicants; this is the responsibility of the job candidate. Benefits and pay are determined at the local level and are not part of Boeing U.S.-based payroll. RELOCATION BENEFITS IF INDICATED ARE LIMITED TO IN-COUNTRY MOVES AND ARE NOT AVAILABLE FOR OVERSEAS RELOCATION. THERE IS NO EXPATRIATE PACKAGE ASSOCIATED WITH THIS POSITION
30
Mechanical Engineer / Design Resume Examples & Samples
- Two to five years' experience of creating system level CAD models and using them to create drawings. Proficiency in Pro Engineer CREO and Windchill is required,
- Experience in machined metals design as well as metal castings, composites, and forgings are preferred
- Previous LMC experience is a plus, and proficiency in CATIA V5 and SMARTEAM is also a plus
31
Test Equipment Design Mechanical Engineer Resume Examples & Samples
- Providing concept, preliminary, and detail modelling and design support for test equipment hardware and experimental test rigs
- Creating Layouts Support design reviews Limit Stacks
- Creating detailed component drawings, assembly drawings, and installation drawings
- Understanding model based definition
- Ability to work and manage large assemblies
- Ability to create and maintain test stand configuration control Internal drive to create test stand models to support future engine installation drawings
- Creating P&ID drawings for test equipment support systems
32
Mechanical Chassis Level Design Engineer Resume Examples & Samples
- Develops new electromechanical products, including rack level systems, chassis enclosures, and miscellaneous related mechanical hardware. Support interface of Molex products to customer and partner company systems
- Design, development, and modification of products within CSBU that meet or exceed customer expectations. Design includes all aspects of product development such as: 3D Modeling, 2D Drawings, design layouts, engineering changes, technical documents, tolerance analysis, product testing, etc. Uses risk reduction tools to perform FEA, model simulation etc. for design analysis. Utilizes a working knowledge of material costs and manufacturing processes to determine the impact on various design attributes. Provides input to the DFMEA analysis of the product as required
- Works with manufacturing engineering to develop manufacturing processes utilizing the latest 3D CAD modeling techniques and other DFM tools
- Provides technical support to customers, suppliers, and inside product marketing personnel
- Leads new product development efforts using the Product Development Phase Gate Process from development of the product concept through volume production
- Work globally with teams to bring products to production (vendor development / foreign manufacturing support)
- Performs design verification activities to ensure that design meets the specifications of the customer, UL requirements, and environmental testing
- 4+ years design experience with rack and chassis level assembly
- MS in Mechanical Engineering with minor courses or degree in Electrical Engineering
- Proficient in Siemens NX solid modeling
- Knowledge of GD&T
- Knowledge of finite element modeling (mechanical and thermal simulations)
- Sense of urgency and ability to multi-task while remaining calm under the pressure
33
Mechanical Sustaining Design Engineer Resume Examples & Samples
- Assists with tasks that include product design, quality assurance, materials recommendations, purchasing, assembly troubleshooting, and inventory planning
- Conduct assignments involving high profile projects
- Work with product line and engineering experts to meet design verification requirements
- Can produce, check and approve manufacturing drawings and working layouts for product designs
- Check and verify assembly or component drawings to ensure they conform to Baker Hughes standards
- Advise various stakeholders on the technical issues that affect the installation of Completions products and/or services
- Bachelor's Degree in Mechanical Engineering with a minimum of 2 years of oilfield mechanical design engineering experience
- Possess problem solving and project management skills
- Proficient with 3D CAD software Solidworks
- Must have ability to work “hands on” in a test lab facility
- Possess good communication skills to interact with internal/external customers and vendors
- Experience with AutoCAD and MicroStation drafting software as well as Teamcenter PLM software
- Familiarity with Oil Field qualification testing, in particular API 11D1, and associated equipment used in such tests
- Proficiency with Technical Writing
- Prior Design experience with Packer, Flow Control, and/or Sand Control equipment
- Understanding of DMAIC Process and related Six Sigma principles
34
Mechanical Prototyping Design Engineer Resume Examples & Samples
- Strong background and experience in mechanical design, prototyping, development, and project leadership. 3D CAD experience required, Unigraphics NX preferred
- Scientific method, experimental process, root cause analysis, tolerance analysis
- Excellent critical analysis, and logic/reasoning skills
- Excellent written and verbal communication skills and people skills; ability to interact with management, team members and external vendors
- Experience with Applied knowledge in flex circuits, printed circuit boards, material science, basic physics and basic chemistry is beneficial
- Experience with sensor technology is a plus
- Experience with 3D printer, laser cutter, and other machine tools is a plus
35
Test Equipment Design Mechanical Engineer Resume Examples & Samples
- Full lifecycle design from requirements capture to final product build
- RCCA of equipment failure
- Plan, Schedule, and Estimate Projects
- Design of equipment to include but not limited to; assembly tooling, test equipment, test cell systems
36
Mechanical Data Center Design Engineer Resume Examples & Samples
- Creates complete data center mechanical designs from concept to construction drawings and specifications
- Generates and reviews mechanical equipment specifications, technical bid tabs, and approve vendor submittal's
- Develops detailed book and on plan specifications and performance requirements
- Travels to client data center sites to perform facility evaluations, mechanical audits, and other tasks as required
- Researches new materials, designs, and construction methods of data center equipment and facilities
- Creates design concepts that can be rapidly produced and easily integrated into critical facilities
- Performs Design using Revit and/or AutoCAD
- CFD Software Modeling experience is a plus
- Engineering Standards: Proactively provides guidance & direction on department design guides, standards, systems, applicable engineering codes & B&V policies. Assists in developing, maintaining & updating engineering standards. Provides technical guidance to others regarding projects & disciplines
- Quality / Continuous Improvement: Independently applies knowledge & ensures compliance with B&V quality program. Establishes related processes, & promotes a culture that is conducive to quality. Provides guidance & direction to others. Supports continuous improvement & change management efforts
- Engineering Production: Prepares a variety of complex engineering deliverables for multiple or mega projects. Performs complex research & develops recommendations for equipment and/or materials selection. Oversees collection, assimilation, & management of data for engineering work. Prepares complex data center engineering calculations following standard methods & principles. Manages assigned budget, schedule, & quality requirements. Develops & applies advanced engineering solutions to complex problems. Reviews lower level engineering work or assignments. Is responsible for one or more of the following: leading production teams; coordinating multiple discipline activity; & serving as the responsible charge for projects. Establishes work plan to be applied to a given project
- Project Coordination: Actively coordinates with all other internal/external team members on complex projects. Responsible for defining project schedules for single or multiple disciplines
- Client Focus: Responsible for determining identification of key client interests & drivers on projects. Communicates client interests & drivers to project team members & develops approaches to accommodate these concerns in the performance of the work on projects. Focuses on client's current needs & situations. May offer other services to the client. Typically provides support to business development or pursuit activities
- Knowledge Sharing, Innovation and Technology: Serves as a data center technical specialist & has knowledge & skill set to provide consultation & guidance to project teams. Typically supports multiple projects on very complex technical challenges. Actively advances knowledge management of the enterprise and provides mentoring. As a subject matter expert, has additional expertise in a technical area, participates in professional societies by presenting papers, participates on technical committees, & assists with code/standard authoring. Is externally recognized in industry as a data center expert which enhances the company brand
- People Management: Typically oversees performance management, career planning, recognition, learning & development, & corrective actions
- Resource Management: Implements resource management strategy. Manages engineering resources. Resolves resource conflicts & identifies training needs. Administrative: Administrative responsibilities may include office administration. Ensures policies, procedures, & processes are effectively implemented & communicated for work group. Ensures adherence to corporate & division programs. May approve timesheets and expense reports
- 11+ years of design experience in the area of mechanical engineering with specific emphasis in data center and mission critical facility and construction projects
- Experienced in fast track design/build projects and/or multiple significant upgrade projects
- Design experience on data center IT projects desired
- Solid understanding of applicable industry codes and standard practices
- Solid mid-level design foundation in HVAC design, pumps, hydronic design, central plant, building load calculations
- Knowledge of Trane Trace and building load calculation software
- Knowledge of LEED Commercial building design
- The ability to perform complex business case analyses is required
- Strong written and oral communication skills, excellent interpersonal skills, ability to prioritize work efficiently, and good team orientation are a must
- Experience using Revit is nice to have
- PE highly preferred
- International experience is a plus
- Travel up to 25%
- Commissioning experience is nice to have
37
Design & Development Mechanical Engineer Resume Examples & Samples
- Design component and assembly concepts, identification of cost reduction and product improvement opportunities
- Create 3D models of new mechanical components and assemblies
- Complete mechanical engineering analyses of components and assemblies: FEA, Tolerance Analysis, DFM, FMEA
- Be open to learning (if not currently skilled) Finite Element Analysis (FEA) models of complex assemblies and loading conditions
- Work with other engineers to ensure that thorough engineering analyses have been completed and risks to cost, quality and delivery have been identified
- Source prototype components using our 3D printers, from our in-house machine shop or nearby vendors
- Assemble functional and aesthetically accurate prototypes for review with senior management
- Conduct effective design reviews to share your work and gather feedback for alternatives and improvements
- Rapidly iterate through the design process to arrive at a solutions that meets cost and quality objectives while meeting key product specifications
- Work closely with our purchasing team and vendors to source and quality production tooling
- Collaborate with team members in our manufacturing facilities to introduce new products/components
- Troubleshoot manufacturing and customer issues
- Assure a high standard of quality in your own work and in the work of others on your team via good design principles, process improvements, safety, aesthetics, smart testing and review practices
- Stay aligned to Lutron's cultures and values
38
Mechanical Ground Support Equipment Design Engineer Resume Examples & Samples
- Plans and arranges labor, schedules, and equipment required for testing and evaluating standard and special devices
- Generate 2D/3D layouts of mechanical support equipment
- Support metal fabrication using standard techniques
- Bachelor’s Degree in STEM (Science, Technology, Engineering or Math) plus 0 years of Mechanical Engineering experience OR Master’s Degree in STEM plus 0 years of Mechanical Engineering experience
- Able to travel to off-site locations as required
- Current Active Security Clearance with an SSBI investigation
- Current active SCI clearance
- Relevant work experience in test and integration engineering role
39
Polymer Design & Mechanical Engineer Resume Examples & Samples
- 2+ years experience designing
- Ability to come up with feasibility study and design concept using CAD
- Familiar with all phase of manufacturing processes (machining, turning, plastic forming and sheet metal fabrication)
- Ability to build a working prototype, testing, debugging from the design concept
- Create 2D detailed drawings (familiar with ANSI 14.5 dimensioning and tolerancing), bill of materials, and assembly drawings
- Ability to work in a fast paced team environment
- Perform hands on assembly, wiring, troubleshooting and programming machines/equipment
- Supervise the building of automated equipment, electro-mechanical equipment or mechanical prototype fixtures
- Ability to troubleshoot and fix existing devices
- Experience with Polymers & Extrusions
- Knowledge of mechanical, pneumatic, and electronic devices commonly used in automation
- Knowledge of SolidWorks
- Knowledge of manufacturing processes
- Experience in medical device manufacturing organization
40
Mechanical & Piping Design Engineer Resume Examples & Samples
- Apply Cost Competitive Execution techniques to develop the most cost-effective total project solution for execution of the discipline engineering work
- Develop and review specifications, including design criteria
- Participate in activities associated with equipment and material procurement, permitting, and subcontracting
- Perform and check calculations, specify equipment, and solve moderately complex engineering problems
- Analyze and make independent recommendations regarding solutions to problems with varying complexity in accordance with organization and/or project objectives and guidelines
- Professional registration and membership in technical society
- Intermediate computer and software skills to include the use of word processing, e-mail, spreadsheet and electronic presentation programs
41
Mechanical System Design Engineer Resume Examples & Samples
- Generates Engineering Models and Drawings utilizing CATIA Version 5
- Performs trade studies for Flight Control Systems to identify optimal engineering solution
- Performs clean sheet component layouts for Flight Control Systems in support of schematic architecture
- Performs kinematic studies and system performance analysis for powered and unpowered Flight Control Systems
- Collaborates with the Integrated Product Team to resolve cross functional issues
- Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability)
- Manages task execution to ensure on-time and on-target completion
- Perform tolerance and deviation studies; define detail parts dimensional requirements to meet final assembly and installation requirements
- Utilizes drafting and Geometrical Dimensioning & Tolerancing knowledge to optimize part design for cost and functionality
- Searches for problem root cause and develop corrective action plans and solutions
- Participates in design/development reviews with management and internal customers
- BS Mechanical Engineering required; Masters degree preferred
- 5 to 15 years of directly applicable years of experience designing mechanical aircraft systems
- Proficiency in use of Catia V5
- Functional knowledge of drafting rules
- Knowledge of Geometrical Dimensioning and Tolerancing
- Proficiency in Microsoft products
- Familiarity with FAR Part 23 or Part 25
42
Mechanical Sustaining & Design Engineer Resume Examples & Samples
- Manage assignments, generally involving large high profile projects and/or multiple projects
- Can produce and check manufacturing drawings and working layouts for product designs
- Work with product line and engineering experts to identify wear criteria on critical components. Prepare necessary documentation for the meeting
- Bachelor's Degree in Mechanical Engineering with 1+ years of mechanical design experience
- SolidWorks Expertise
43
Mechanical Engineer Design Elsys Resume Examples & Samples
- Mechanical design for avionics systems
- Reverse engineering of mechanical assemblies and devices in avionics systems
- Preparation of technical data packages to specifically document mechanical specifications required to manufacture an avionics assembly
- Participate in testing and qualification of avionics systems
44
Mechanical System Integration & Design Engineer Resume Examples & Samples
- Mechanical Systems definition, from Principal Diagrams and System Architecture
- Mechanical Components Specifications for purchasing
- Mechanical Parts Documentation for manufacturing
- Mechanical Systems Installation Documentation for assembling
- Degree in Aeronautical Engineering or equivalent
- Abilities to develop Design delegation
- Motivated, proactive and team dynamic player
- Committed in their own development to learn new skills
- Fluency in Writing and Spoken English
- Knowledge of aircraft systems & structures design (composite and/or metallic)
- Knowledge and experience in CATIA and PDM/PLM Tools, as well as the usual back office tools (Office…)
- Knowledge and / or experience in work linked to Aeronautic military projects and/or work development knowledge and experience in Airbus platforms will be assessed
- A professional experience as an Engineer / Designer will be assessed in
- Electrics and Avionics Installation (Electric, Electronic & Electromagnetic Equipment, Lights & Cameras, Sensors & Antennas, Cockpit Instruments…)
- Fluid Systems Installations (pneumatics, hydraulics, fuel, air conditioning, inerting water & waste, oxygen, fire extinguishing…)
- Power-plant Systems or Landing Gear Installations,
- Basic knowledge of structural, electrical and mechanical design and repair techniques
45
Mechanical Ground Support Equipment Design Engineer Resume Examples & Samples
- Experience in developing Mechanical Engineering drawings using Unigraphics design tools
- Experience in the development GSE design requirements
- Space or launch vehicle experience
46
Mechanical Simulation & Design Engineer Resume Examples & Samples
- Execute on Mechanical Design Architectures of Mobile POS devices and subsystems
- Mesh models and use best in class tools to simulate the designs, make conclusions with the simulation results, and recommend and execute upon design changes to optimize
- Oversee suppliers and design partners of subsystems and individual part designs from concept to production
- Analyze real world reliability test results and correlate the results to simulated expectations, and again recommending and executing on ECNs to optimize
- Collaborate with Product Management, Industrial Design, RF/Antenna Engineers, Baseband Engineers, Supply Chain, and Program Management organizations to deliver world class enterprise devices
- Use simulation tools to root cause design, manufacturing, and/or production issues to improve designs to successfully take products to mass production
- Design for function, reliability, human factors, manufacturability, and cosmetic requirements
- Minimum 5 years of experience with Mechanical FEA simulation tools – meshing designs, executing the SIMs, interpreting the results making design change recommendations
- Expertise with CAD tools (PTC Creo / Pro E)
- Experience with mechanical design of plastic, glass, rubber, and metal components, PCBs and FPCBs, and opto-electronic physical designs used in electronic products
- MS Degree in Mechanical Engineering, Product Design, or related field
- Minimum 10 years of experience with Mechanical FEA simulation tools – meshing designs, executing the SIMs, interpreting the results making design change recommendations
47
Mechanical Ground Support Equipment Design Engineer Resume Examples & Samples
- SSBI security investigation within past 5 years required to start
- Ability to obtain and maintain SCI access
- Active Top Secret (with SSBI) OR SCI security clearance
