Mechanical Commissioning Engineer Resume Samples
4.7
(87 votes) for
Mechanical Commissioning Engineer Resume Samples
The Guide To Resume Tailoring
Guide the recruiter to the conclusion that you are the best candidate for the mechanical commissioning engineer job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.
Craft your perfect resume by picking job responsibilities written by professional recruiters
Pick from the thousands of curated job responsibilities used by the leading companies
Tailor your resume & cover letter with wording that best fits for each job you apply
Resume Builder
Create a Resume in Minutes with Professional Resume Templates
CHOOSE THE BEST TEMPLATE
- Choose from 15 Leading Templates. No need to think about design details.
USE PRE-WRITTEN BULLET POINTS
- Select from thousands of pre-written bullet points.
SAVE YOUR DOCUMENTS IN PDF FILES
- Instantly download in PDF format or share a custom link.
CO
C O'Kon
Cortez
O'Kon
2731 Kendra Inlet
Houston
TX
+1 (555) 178 9698
2731 Kendra Inlet
Houston
TX
Phone
p
+1 (555) 178 9698
Experience
Experience
New York, NY
Mechanical Commissioning Engineer
New York, NY
Grady-Fahey
New York, NY
Mechanical Commissioning Engineer
- Advises startup management of developments that may affect project costs, schedules, and client relations
- Troubleshoot and isolate system problems, including submitting Request for Information (RFI’s), correcting or suggesting resolutions and providing a written report of the results
- Responsible for direct interface with, and providing assistance to other discipline startup professionals
- Monitor the HSE performance of all commissioning Contractors in the area (against the Departmental, Project or Contract HSE Plan) and ensure that all work sites under his control are operating in a safe manner
- At the direction of the Commissioning Manager, responsible for reviewing Commissioning Procedures provided by the Contractors when necessary
- Provide comprehensive project management
- Ensure that the relevant permit to work is in place prior to commencement of work and familiar with Isolations
Los Angeles, CA
Mechanical Commissioning Engineer
Los Angeles, CA
Gislason LLC
Los Angeles, CA
Mechanical Commissioning Engineer
- Perform specific functions normally performed by the discipline lead when designated by the startup manager
- Supports continuous improvement efforts and the change management effects associated with the implementation of improvements
- Assist and/or develop preventative maintenance plans
- Perform all functions pertaining to a written job proposal to a client, including estimate of man-hours and expenses, and development of scope and pricing
- Review all time cards and requisitions charged against the startup budget associated with assigned area of responsibility. Submit all time cards and requisitions to discipline lead for approval
- Before turnover acceptance, may also function as operational shift supervisor coordinating the tasks of field engineers, vendor service engineers, and the owner operating personnel
- Assists in the development of mechanical commissioning procedures
present
Chicago, IL
Data Center Mechanical Commissioning Engineer
Chicago, IL
Reichel-Cassin
present
Chicago, IL
Data Center Mechanical Commissioning Engineer
present
- Mechanical Engineering, Construction Management, Architecture or Facilities Management
- Manage Cx reporting & dashboards, develop/maintain metrics
- Manage technical escalations on testing scope & issues from project level, provide direction
- Lead/direct development & update of Cx standards (process, testing, tools, etc)
- Gain management approvals for project execution strategy, budget
- Manage Owner’s vendor partner selection & relationships
- Work with Project Controls on to evaluate and control major financial risks that arise within the program and on project sites
Education
Education
Bachelor’s Degree in Mechanical Engineering With Focus
Bachelor’s Degree in Mechanical Engineering With Focus
University of Pittsburgh
Bachelor’s Degree in Mechanical Engineering With Focus
Skills
Skills
- Solid knowledge in HVAC and with Auxiliary system PID and with proficiency mechanical skills
- Be able to work independently with little supervision
- Well organized and detail minded
- Experience working on HRSG, power plant projects is desirable
- Ability and willingness to travel
- Be a team player who can provide valuable input during both planning and execution phase
- Knowledge and experience working with multiple engineering organizations
- 3+ years of applicable experience
- Perform complex Pre-Op tasks i.e. cold hydro testing, hot functional testing, integrated leak rate/structure integration
- Attitude & Personality
5 Mechanical Commissioning Engineer resume templates
Read our complete resume writing guides
1
Mechanical Commissioning Engineer Resume Examples & Samples
- Responsible for direct interface with construction personnel coordinating construction completion in areas and systems under assignment
- Generates and maintains records of tests and other startup related activities
- Assist construction team in execution of required pre-commissioning activities
- Maintains communications to ensure accurate and timely flow of information
- Advises startup management of developments that may affect project costs, schedules, and client relations
- Assists in the development of mechanical commissioning procedures
- Reviews system turnover packages
- Track and report on all issues affecting Mechanical Startup and Commissioning and promptly advising
- Lead Mechanical Startup Professional of issues that may impact achievement of project goals and objectives
- Maintain a daily diary to permanently record all significant project facts, events, conditions, visitors etc
- Record and maintain as-built documentation and submit it to the Resident Engineers for updates
- Responsible for direct interface with, and providing assistance to other discipline startup professionals
- Ensure that spare parts and consumables necessary for operation of the assigned system are available
- Request operator, construction craft or vendor assistance as necessary
- Work with Startup Construction Superintendent to ensure Startup Activities that require craft support are planned, communicated and completed
- 5 years mechanical startup experience on similar projects (Combined Cycle, Combustion Turbine)
- Engineering Degree/Certification (or equivalent operational experience (Naval, Maritime, Stationary Engineer))
- OSHA 10 or 30 Hour Training – preferable
- Ability to commit to 3:1 FIFO roaster to Darwin
2
Mechanical Commissioning Engineer Resume Examples & Samples
- Monitors, verifies and reports on mechanical commissioning activities to the Commissioning Manager concerning compliance with the PMP & Contractor’s schedules; and reports on completion of project commissioning schedule activities
- Assists labour/contractors in resolving problems and reports on issues related to drawings and information, schedule, quality, quantity tracking, cost reporting, and safety
- Monitors mechanical construction/commissioning productivity, progress, and cost, and reports to Commissioning Manager
- Conducts commissioning meetings as assigned to review/assist in daily, weekly, and monthly planning
- Provides input into recovery plan to ensure progress and productivity targets are met
- Provides input into material, manpower and other resources needed to support the 3 Week Look Ahead Schedule
- Develops, monitors, and reports on completion of labour/contractor punch list activities
- Maintains a daily log for site records
- Monitors Technical Service Representative (supplier) daily log and reviews/approves their timesheets during the commissioning phase
- Communicates and coordinates assigned labour/contractor(s) daily and weekly work plans with other discipline commissioning Leads and the Commissioning Manager
- Monitors assigned contractor(s) for compliance with contract scope and schedule requirements during commissioning phase
- Develops a stable working relationship with contractor(s)
- Assists the Field Engineers in the compilation of or answering Contractor Information Requests. At the direction of the Commissioning Manager, responsible for compiling and answering assigned CIRs if required
- At the directions of the Commissioning Manager, responsible for reviewing risk assessments and method statements when necessary with the assigned safety officer for major erection packages
- At the direction of the Commissioning Manager, responsible for reviewing Commissioning Procedures provided by the Contractors when necessary
- At the direction of the Commissioning Manager, responsible for identifying potential employer claims (back charges) and out of scope issues and as reported by Mechanical Commissioning Engineers. Supports commercial recovery process
- At the direction of the Commissioning Manager, responsible for and provides supervision, Skills and Knowledge Training, development, and performance management to direct reports and Eskom Personnel
- Adheres to safety and quality standards as applicable to duties and accountabilities
- Assists in the development of startup packages as required. Tracks and controls all documentation required for proper maintenance of the startup packages. Participates in the preparation and maintenance of a detailed startup schedule. Proactively plans for startup activities and major milestones (such as major equipment, chemical cleaning, steamblow, or demonstration and performance testing). Manages construction completion, turnover to startup, startup turnover to operations, and final turnover to the client. Assists in the development of clear startup procedures as required to satisfy the contract and/or coordinate the startup effort. Assists in the advanced planning and preparation for startup activities and major milestones. Participates in the development and implementation of programs for the control of; spares, consumables, outstanding work and deficiencies lists, etc. Executes the startup effort ensuring compliance with the associated specifications and contracts and ultimately resulting in an efficient and timely turnover to the client
3
Mechanical Commissioning Engineer Resume Examples & Samples
- Complete all the pre-commissioning and commissioning related activities
- Responsible for effective coordination with vendors and with clients
- B-ITRs completions and all the prescribed activities to be carried out
- Ensure the performance run, stability run and trouble-shooting the issues
- Preparation of the pre-commissioning and commissioning result documents
- Develop the system and subsystem mark-ups and systemization in coordination with Commissioning Manager
- Coordination with Commissioning Engineers of various disciplines to get the pre-commissioning and commissioning activities completed
- Assist with for the close-out of all B-ITRs related to CCMS
- Ensure that all work is completed according to design and commissioning procedures, on schedule and to the appropriate levels of HSE and Quality
- Reports directly to the Commissioning Lead on a day-to-day basis
- Review the scope of construction and identify any possible anomalies during construction
- Input commissioning expertise into the design process
- Monitor the HSE performance of all commissioning Contractors in the area (against the Departmental, Project or Contract HSE Plan) and ensure that all work sites under his control are operating in a safe manner
- Assist the Commissioning lead with plan for station or part of station start-up and shutdown with operations
- Assist with reviewing marked-up as built drawings (PEFS) of the completed construction before commissioning and handover to operations
- Highlight any deviations from the original design to the Commissioning Lead
- Bachelor's Degree in Mechanical with minimum of 10 years of relevant industry experience
- Must have practical hands on field experience during all stages of project life construction, commissioning and start up and be able to communicate with team leaders of a multi-discipline team
- Be a team player who can provide valuable input during both planning and execution phase
- Experience working on HRSG, power plant projects is desirable
- Previous experience working on PDO projects would be an advantage
4
Mechanical Commissioning Engineer Resume Examples & Samples
- Assist commissioning group and operations personnel assigned to the commissioning group at the onshore and offshore locations
- Assist Co-ordination and execution of the commissioning activities at the onshore and offshore locations
- Assist Co-ordination liaison for all interfaces on site and with all integrity groups to ensure to ensure the project requirements and performance standards are achieved, including maintaining schedule and cost targets
- Review Operational Test Procedures associated with the Commissioning of Mechanical / piping, Process, HVAC
- Provide input for the most effective use of vendors
- Provide input during project review of ITR / ITP including system/s allocation during CMS population
- Have execution and working knowledge of CMS used on major projects ICAPS, GOC, Winpcs ETC
- Witness Factory Acceptance Test as necessary
- Provide technical input during planned systems fills, runs, N2 testing volumes, flaring, chemical cleaning, flushing
- Assist in the N2 leak testing project execution
- Input to the development of the detailed plan and planning systems including reporting of progress
- Attending Commissioning and inter Department meetings
- Support of the discipline commissioning engineers in achieving the commissioning scope
- Support Liaison with independent inspection authorities and demonstrate facilities as required to satisfy the project performance standards and legislative requirements
- Ensure that changes implemented during the commissioning activities are approved and documented
- Provide Review of TQ’s, EQ’s, and SI’s insuring that they are included in the Commissioning scope where applicable
- Provide Assistance and directive in the Preparation of requisitions, technical specifications for materials, equipment and consumable required to perform the commissioning scope of work
- Participate in the hand over acceptance of system/sub-system with the Mechanical Completion and Operations group
- Promote project safe working practices in line with the safety management systems
- Provide positive input in Planning and scheduling the correct resource levels
- Liaison with construction in providing and achieving the milestone objectives
- Ensure that the relevant permit to work is in place prior to commencement of work and familiar with Isolations
- Review of plant performance test procedures
- Any Degree level, preferably a Bachelor's degree in engineering
- At least 15 years' experience in the oil and gas industry with at least 5 years in a leading role
- Must have extensive knowledge and experience of Oil & Gas process plant & equipment
- Must have extensive knowledge and experience of rotating machinery including Turbines & Gas Compression & pumps
- Must have extensive knowledge and experience of machinery cold and hot alignment
- Must have extensive knowledge and experience of vibration monitoring checks and baseline surveys of rotating equipment
- Must have extensive knowledge and experience of HVAC systems and balancing of system
- Must have extensive knowledge and experience of piping systems, testing, flushing chemical cleaning
- Must have extensive knowledge and experience of valves & valve integrity testing
- Must have extensive knowledge and experience of mechanical package equipment
5
Mechanical Commissioning Engineer Resume Examples & Samples
- Perform all aspects of commissioning of mechanical and control systems
- Develop and participate in Owners Project Requirements (OPR) process & document creation
- Perform commissioning design reviews and comment on
- Review submittal documents
- Prepare pre-functional and functional forms, review forms after completion
- Participate in design/construction/commissioning/progress/issues meetings as required
- Develop commissioning requirements/plans including commissioning project specifications
- Track & report issues including problem solving
- Develop, coordinate, & participate in training programs
- Develop and participate in Integrated Systems Tests (IST)
- Develop and/or review Systems Manuals
- Assist and/or develop preventative maintenance plans
- Assist with writing and assembly of commissioning reports
- Provide comprehensive project management
- Represent the Company as a lecturer on technical topics
- Play an important role in each commissioning project
- Perform as lead on small to moderately-sized commissioning projects
- Be responsible for commissioning communications and updates
- Insure project schedules are being met
- Take an active role in business development and expansion
- Maintain strong client relationships
- Perform all functions pertaining to a written job proposal to a client, including estimate of man-hours and expenses, and development of scope and pricing
- Graduate BSME/BSMET Engineer and one year minimum same or similar work experience. At least (1) commissioning project including Design, Construction, and Post-Occupancy phase processes. OR Graduate of applicable Commissioning Technical Training and two years minimum same or similar work experience. At least (5) commissioning projects including Design, Construction, and Post-Occupancy phase processes. OR High school education or equivalent and five years minimum same or similar work experience. At least (8) commissioning projects including Design, Construction, and Post-Occupancy phase processes
- Knowledge of ASHRAE commissioning industry standards. Commissioning certification, such as from the Building Commissioning Association, University of Wisconsin or similar is preferred but not necessary
- Knowledge of the Leadership in Energy and Environmental Design (LEED) process for New Construction and Existing Buildings. LEED Accredited Professional preferred but not required
- Knowledge and theoretical understanding of building mechanical systems, including normal and emergency systems, sequence of operations
- Background and experience in operation and maintenance of mechanical systems
- Knowledge of the National Electrical Code and various industry standards, such as OSHA and NFPA
- Complete projects consistently on budget
- Able to write detailed reports, using a computer, and accurately process job billing
- Communicate effectively, in writing and verbally, with clients and peers
- Communicate technical or project related subjects accurately via email
- Performs well as part of a team of various groups and disciplines
- Good judgment, dependable, performs on projects with technical expertise
- Strong computer skills including editing, formatting in Microsoft Word and Excel, use of Internet for standards/products/manufacturer research, and operation of computer controlled test equipment
- Willing to work flexible hours, weekends, holidays and night work. Must be available for out-of-town and international travel of up to several weeks
- Regularly required to stand, walk, use hands and fingers, handle or feel objects, tools or controls; reach with hands and arms; stoop, kneel, crouch, or crawl; talk, hear, and smell. Frequently required to sit, climb and balance. Specific vision abilities required by this job include close vision, distance vision, basic color differentiation and the ability to adjust focus. Regularly lift and/or move up to 25 pounds, and occasionally lift and/or move 100 pound test sets
6
Mechanical Commissioning Engineer Resume Examples & Samples
- Supervision of field contractor during installation and commissioning of Rotating, Auxiliary, and Back-up equipment
- 2-year or 4-year degree in (engineering, engineering technology or a technical field) with 5+ years field experience with mechanical equipment
- No degree and 10+ years field experience, or a Millwright trained journeyman mechanical or military trained mechanic experience will also be considered
- Position requires demonstrated experience and mechanical aptitude/skills with construction drawings, basic hand tools, knowledge of each machine's working parts and working with and supervising contractors
- Excellent reading comprehension to understand highly technical manuals
- Ability to troubleshoot potential causes of machinery breakdowns are required
- Strong leadership, written and verbal communication, organization and planning, and a proven ability to work effectively in a team environment
- Domestic and International travel up to 75% of the time to support project tasks and construction
- Excellent working knowledge of Microsoft Excel and Project
7
Data Center Mechanical Commissioning Engineer Resume Examples & Samples
- Direct involvement in data center construction commissioning, or similar construction quality control monitoring for data centers or other critical environments
- As the Data Center Mechanical Project Manager you will work with the Owners Representative: Lead overall Cx execution strategy for Owner & scope decisions for enterprise data center construction projects in multiple geographic regions concurrently
- Strongly preference to candidates with direct data center project experience writing Level 1 – 5 commissioning test scripts
- Lead/direct development & update of Cx standards (process, testing, tools, etc)
- Put processes in place for Owner to ensure technical consistency & documentation of Cx program
- On behalf of Owner, ensure proper implementation of Cx strategy/execution at site level
- Manage technical escalations on testing scope & issues from project level, provide direction
- Represent Cx in all of corporate Owner’s program initiatives & meetings
- Ensure that Owner’s Regional FM & Owner’s Construction Project leadership buy-in of Cx & program roadmap and direction, resource requirements
- Work with Project Controls on to evaluate and control major financial risks that arise within the program and on project sites
- Manage Owner’s vendor partner selection & relationships
- Gain management approvals for project execution strategy, budget
- Put processes in place to ensure technical consistency & documentation of Cx program
- Manage Cx reporting & dashboards, develop/maintain metrics
- Mechanical Engineering, Construction Management, Architecture or Facilities Management
- Direct experience with commissioning of mechanical / electrical / process piping programs and also managing the construction turnover to operations of critical environments
- Ability to drive leadership, broad adoption, and ensure compliance of enterprise-wide Construction Quality Programs within a large corporate construction & facilities organization
- End-to-end, hands-on experience with Data Center Construction and data center facilities operations
- Bachelors Degree in either: Engineering, Construction Management, Architecture or Facilities Management or equivalent
8
Mechanical Commissioning Engineer Resume Examples & Samples
- Monitor construction schedule activities, provide on- site observations and related reports
- Witness and document contractor QA/QC testing activities
- Review and verify pre-functional construction checklists and document related findings
- Attend and participate in post construction (warranty phase) meeting
- 5 years project experience writing Level 1 – 5 commissioning test scripts for Data Center projects
- Direct experience with commissioning of data center programs Mechanical systems
- Managing the construction turnover to operations of critical environments
- Bachelor’s Degree in either: Mechanical Engineering, Construction Management, Architecture or Facilities Management or equivalent
- Lead/direct development & update of Cx standards
- Familiarity with General Construction and MEP works QA/QC Standards, and has the ability to lead/direct development & update of QA/QC Standards (process, metrics, tools, etc)
- Minimum 5 years direct experience in MEP infrastructure & general construction commissioning of large critical environments: i.e. – data centers, clean rooms, semiconductor fabs, critical hospital operating rooms, and other “zero downtime” critical facilities
9
Mechanical Commissioning Engineer Resume Examples & Samples
- Assist in establishing the initial startup schedule and system turnover dates as well as any other assignment required to plan the specific project startup process
- Develop scoping drawings into appropriate turnover systems and understand system boundaries
- Review startup schedule for both manpower and task durations
- Input data into the project startup database including scoping design lists from engineering and schedule dates for system turnovers
- Coordinate between the startup, construction and engineering teams to ensure startup attendance and participation in review meetings during the design process
- Review engineering drawings and specifications to ensure adequate provisions have been made for testing, flushing, cleaning and other pre-commissioning functions
- Observe strict adherence lockout/tagout procedures (LOTO)
- Review and sign Job Hazard Analysis, (JHA) for each assigned crew
- Hold and/or attend daily safety meetings
- Promote and insist on good housekeeping in the office and on the project site
- Inspect systems before turnover to identify exceptions and deficiencies and review system turnover packages to ensure all test records are included and all exceptions are listed
- Coordinate initial, functional testing and operation of assigned plant systems
- Check and document final alignment data and vibration testing data for rotating equipment
- Complete the initial charging of systems with chemicals, gases, resins, salt, fluids, etc
- Conduct and direct cleaning, velocity flushing, and pre-commissioning of plant systems
- Work closely with client site personnel and vendor service engineers engaged in pre-commissioning activities
- Identify data sheets and test records to be completed during commissioning of equipment, calibration checkout and testing
- Prepare and/or review assigned test procedures
- Troubleshoot and isolate system problems, including submitting Request for Information (RFI’s), correcting or suggesting resolutions and providing a written report of the results
- Conduct system walk downs and generate punch lists; if necessary, recommend the system be turned back to construction
- Supervise functioning for assigned tests adhering to contract requirements
- Provide technical advice and guidance for system operation and maintenance during the startup period
- Identify spare parts and consumables necessary for operation and maintenance of a system
- Coordinate with discipline lead for operator, craft or vendor assistance for startup activities
- Supervise construction craft labor as assigned
- May supervise and direct an operational shift as the facility progresses through commissioning and testing
- Before turnover acceptance, may also function as operational shift supervisor coordinating the tasks of field engineers, vendor service engineers, and the owner operating personnel
- Review all time cards and requisitions charged against the startup budget associated with assigned area of responsibility. Submit all time cards and requisitions to discipline lead for approval
- Assist in commissioning and testing individual components, systems, and the station as a complete integrated unit to meet all contractual obligations
- Perform specific functions normally performed by the discipline lead when designated by the startup manager
- Five plus years of experience in engineering or field engineering
- Experience using computer management and scheduling tools
- Experience reading and interpreting engineering drawings and manuals with strong analytical and troubleshooting skills
- Working knowledge of rotating equipment operation, pump and fan curves
- Experience or working knowledge of hydro-lazing, lube oil flushing, hydraulic flushing, vibration analysis and witnessing rotating equipment alignment
- Demonstrated ability to perform chemical cleaning and steam blow activities
- Strong technical, supervisory and organizational skills
- Professional interpersonal skills to interact effectively with people at all levels of the organization including owners and subcontractors
- Ability to work independently on complex field issues with an owner-service focus
- Strong time management skills with the ability to prioritize effectively, handling multiple deadlines simultaneously
- Working knowledge of Microsoft Office Suite (Word, Excel, PowerPoint, and Outlook)
