Machine Shop Resume Samples

4.8 (102 votes) for Machine Shop Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the machine shop job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Resume Builder
CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.
USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.
SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Create a Resume in Minutes
KR
K Rice
Kelton
Rice
4266 Devonte Parkway
Los Angeles
CA
+1 (555) 617 0724
4266 Devonte Parkway
Los Angeles
CA
Phone
p +1 (555) 617 0724
Experience Experience
Chicago, IL
Machine Shop
Chicago, IL
Littel-Pagac
Chicago, IL
Machine Shop
  • Facilitate efforts with suppliers on new product development and improvements to existing products
  • Facilitate necessary repairs to maintain a high state of performance on all machine shop equipment
  • Identify and implement countermeasures to improve safety, quality, efficiency, and cost metrics
  • Partner Engineering to fabricate and implement improvements to existing processes, tools, and fixtures
  • Coordinate the rebuild, replacement, and installation of equipment
  • Direct all employee activities and changes on shop floor
  • Implement and maintain a lean manufacturing culture
New York, NY
Machine Shop Manager
New York, NY
Price-Schumm
New York, NY
Machine Shop Manager
  • Setup/Operate Manual/CNC Lathe
  • Setup/Operate Manual/CNC Mill
  • Fabricate prototype components, fixtures, tooling and equipment. Modify components and assemblies in support of product development engineering
  • Assist with development of tooling
  • Provide design, fabrication and assembly feedback to engineering team
  • Coordinate machine shop activities, set priorities and track progress. Ensure the shop is properly equipped and organized and that the equipment is safe. Enforce safety standards
  • Coordinate overflow work with local suppliers
present
Dallas, TX
Machine Shop Lead
Dallas, TX
Jaskolski-Hirthe
present
Dallas, TX
Machine Shop Lead
present
  • Works with M.E.’s to make process improvements and develop process control procedures
  • Work following safety manual guidelines at all times. Observe good machine shop practices maintaining highest level of working environment
  • Works in conjunction with Manufacturing Engineering & other Fabrication Departments to ensure smooth & continuous workflow
  • Assists in training of new workers
  • Read engineering prints and interpret tolerances and fits. Develop optimal machining/fabrication process to make parts per given specifications
  • Makes recommendations to management for the purchase of new equipment as well as repairs & upgrade of existing equipment
  • Provide adequate training for department personnel
Education Education
Bachelor’s Degree in Initiative
Bachelor’s Degree in Initiative
University of Kentucky
Bachelor’s Degree in Initiative
Skills Skills
  • Knowledgeable in a wide variety of manufacturing processes
  • Good communication and documentation skills
  • Hands on Supervisor skilled at setting priorities and handling multiple projects at the same time and able to work well in a team environment
  • Ability to fabricate & measure precision components per specification
  • Ability to read & understand technical drawings
  • BS/BA desired
  • Coordinate machine shop activities, set priorities and track progress. Ensure the shop is properly equipped and organized and that the equipment is safe. Enforce safety standards
  • Coordinate overflow work with local suppliers
  • Provide design, fabrication and assembly feedback to engineering team
  • Assist with development of tooling
Create a Resume in Minutes

15 Machine Shop resume templates

1

Machine Shop Service Manager Resume Examples & Samples

  • Experience in manufacturing and assembly with emphasis in process improvement, process flow and production strategies
  • Experience leading Machinists
  • Demonstrated experience in performance management
  • Demonstrated strong interpersonal, organizational and time management skills
  • Demonstrated strong written and verbal communication skills
  • Ability to communicate effectively within all levels of the organization
  • Demonstrated computer proficiency to include Windows and Microsoft applications (Outlook, Word, Excel, PowerPoint)
  • Demonstrated problem solving skills, as well as continuous improvement process skills
  • Prior experience in a union environment
  • Experience with CNC Mills and Lathes (Conversational and G-Code)
  • Experience with offline programming
  • Experience reading engineering drawings and 3-D solid models
  • Prior experience with MS Access, Business Objects, SAP or Maximo
  • BA/BS degree in a Mechanical, Electrical, Manufacturing Engineering or similar discipline
2

Machine Shop Resume Examples & Samples

  • Direct all employee activities and changes on shop floor
  • Direct all Supervisors to achieve safety, quality, efficiency, and cost metrics
  • Identify and implement countermeasures to improve safety, quality, efficiency, and cost metrics
  • Implement, maintain, and enhance Preventive Maintenance (PM) of all machine shop equipment
  • Facilitate necessary repairs to maintain a high state of performance on all machine shop equipment
  • Coordinate the rebuild, replacement, and installation of equipment
  • Partner Engineering to fabricate and implement new tools and fixtures for new products
  • Partner Engineering to fabricate and implement improvements to existing processes, tools, and fixtures
  • Coordinate all Tool Crib functions
  • Facilitate efforts with suppliers on new product development and improvements to existing products
  • Implement and maintain a lean manufacturing culture
  • Maintain employee morale and engagement
  • Bachelor’s Degree plus 5 years managerial experience
  • Minimum of 10 years shop related experience preferred
  • Must exhibit good leadership skills
  • Machining, assembly, tooling, and fixture experience is preferred
  • Must possess good planning, coaching, facilitating and coordinating skills
  • Must be flexible and able to adapt to a rapidly changing environment
  • Must have a passion for developing and making others successful
  • Demonstrated successful ability to organize and prioritize work to ensure timely deadlines
  • Ability to function at a high level of effectiveness, flexibility, independence and initiative without daily interaction with management
  • Proficient computer skills required including Microsoft Office Suite
  • Familiarity with the plumbing industry and products
3

Machine Shop Planner Resume Examples & Samples

  • Ensures coordination with Value Stream and Cell Leaders to make adjustments to production schedules daily/weekly as needed to meet business and customer needs
  • Perform supply demand analysis each week, highlighting areas of concern for the next 12 months. Coordinate reviews with Purchasing and other support groups as needed
  • Develop inventory targets and manage production to achieve targeted inventory levels on both a cost and unit basis
  • Maintain semi- finished goods inventory at target levels in ensure high service levels, i.e. product availability
  • Project semi-finished goods inventory levels on a quarterly basis. Achieve desired corporate inventory turn targets
  • PFEP- Level loading demand
  • Communicates with Upper Level Planner as needed when there is risk associated with deliveries
  • Supports meetings to review service levels, performance against schedule, inventory strategy, supply plan to meet demand, and resource implications. Update Production Plan as necessary
  • Drives the annual physical inventory process for their functional area
  • Plan and release manufacturing work orders. Prepare documentation and work packages required for meeting customer delivery and quality requirements
  • Arrange for delivery, assembly, and distribution of supplies and parts in order to expedite flow of materials and meet production schedules
  • Directs analyzers, expediters, stockroom and shipping personnel on daily priorities and customer needs
  • Works with manufacturing, engineering and procurement to develop lead times and standard lot sizes, then monitors actual results and revises them accordingly
  • Leads production meetings, responsible for oversight and status of material requirements
  • Addresses inventory/materials issues during daily performance management process
  • Responsible for maintaining minimal inventory without negatively impacting delivery
  • Strong negotiation skills with the ability to reason and influence at all levels
  • Working knowledge of Microsoft applications including Excel, Word and PowerPoint
  • Communicate and interface with all departments and facilities within the site
  • Effectively communicate, giving clear and concise verbal and/or written instruction
  • Communicate necessary information to production control and manufacturing through the Inventory Management system
  • Interface with key members of management and customers
  • Work tasks will be performed in a timely, efficient and orderly manner to meet customer requirements
  • APICS certification
  • 3+ years’ Experience using MRP / ERP systems, especially Advance Planning Systems
  • 3+ years production planning and scheduling experience in a low volume high mix-manufacturing environment
  • 3+ years knowledge of supply chain processes and procedures including manufacturing planning, demand, and replenishment processes
  • 2+ years’ experience Microsoft Suite Products
  • Bachelor’s degree with a focus in Business Management / Supply Chain
  • Aerospace Industry Experience
4

Machine Shop Layout Specialist Resume Examples & Samples

  • Obtain appropriate drawings, Boeing (BAC) specification, documents and/or sketches, using computing systems (e.g., Bold/Web, CATIA), as required
  • Determine media to be used (e.g., coordinate measuring machine (CMM), conventional numerically controlled (CNC) catia, digital data) in layout process
  • Perform layout of part or check work using precision measuring tools (e.g., height gauge, sine bars, micrometer) on surface tables to ensure accuracy
  • Design catia information (e.g., digital data, plots, coordinates, overlays) to facilitate customer (e.g., Quality assurance, engineering, machine shop, production, and tooling) as required
  • Provide information to verify per drawing standards (e.g., radi, tangent points, hole points) thru digitization of photo contact master (PCM) to numerically controlled (NC) or (CNC) conventional numerically controlled machines
  • Troubleshoot and edit media Tryout (MTO), as required
  • Set up and design shop aids for difficult machine operations
  • Work and develop experimental processes (e.g., shot peen, heat treat, plating) to obtain dimensionally correct parts
  • Operate and run overhead crane to position parts/tools into position
  • Layout, plan and sequence work, use shop math, geometry, and/or trigonometry to calculate dimensions, as required
  • Investigate and resolve shop/engineering, rejections by recommending methods, ways, processes, and sequences of operations, which can be used in machining to solve problems
  • Problem solving getting concurrence/verification for best fit of material through geometric dimensioning and tolerance interpretation
  • Operate and run CMM machine to check discrepancies (e.g., flatness, straightness, lack of material, hole location) to verify discrepancies
  • Consult with management and/or others (e.g., production, engineering, planning), on process or job related issues as required
  • Maintain personal and tool certifications, as required. Handle and dispose of hazardous materials in approved manner as required
  • Capable of lifting 10 pounds on a frequent basis is required
  • Must be able to stand 6-8 hours per day
  • Experience with precision measuring tools
  • Machined part layout experience
5

Machine Shop Inspector Resume Examples & Samples

  • 5+ years of experience Machining experience
  • 2+ years as a line level QC inspector in an aerospace environment required
  • High School Education
  • Mechanical ability
  • Excellent written communication skills
  • Ability to use Microsoft Word and Excel, and email
  • Proven ability to navigate, interpret, and apply tech data (Manuals/Drawings/Etc)
6

Machine Shop Operator Resume Examples & Samples

  • Manage subcontract risks
  • Negotiates subcontracts with suppliers
  • Develops appropriate reporting and subcontract management processes for projects
  • Advises management and staff on the practical and necessary steps to ensure corporate processes are followed
  • Extensive (anticipated at least 5 years) commercial contracts and contract/subcontract management experience
  • Ability to review, draft and negotiate subcontract terms and conditions
  • A well-organized individual who can relate to management, line workers, government officials, customers, and visitors
7

Machine Shop Resume Examples & Samples

  • Operates bridge crane/fork lift/pallet jack to bring fans to work station and/or testing area; safely operates lift table to bring work up to a comfortable working height (if applicable)
  • Reads and interprets blueprints; checks shop orders to ensure that all necessary parts and accessories are readily available; and finds all necessary parts and accessories that are not with the current parts
  • Positions parts and examines connections for correct fit; resolves assembly and production issues; reports quality issues and errors in production line; and informs supervisor of any shortages in parts or hardware
  • Arranges shaft and bearings and ensures that the center of the shaft is in the center of the housing and has an equal distance in radius in all directions. Connects the prop and ensures that it is the correct size (if possible). Connects lube lines (copper, plastic, stainless steel). Connects the motor and belt alignment
  • Uses appropriate tools to assemble and fasten all parts on the fan assembly per TCF engineering and quality standards
  • Wires all necessary wires correctly and safely
  • Removes small quantities of metal with hand files, scrapers, and die grinders to ensure proper fit between parts
  • Verifies that everything from the shop order is completed prior to signing off on each unit
  • Additional duties may be assigned, dependent upon location and product line
  • High school diploma or GED
  • 6+ months’ experience and/or training (technical school) or equivalent combination of education and experience
  • Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals written in English
  • Basic math skills to include addition, subtraction, multiplication and division in all units of measure including whole numbers, fractions and decimals. Ability to read a tape measure
  • Ability to use tools in a safe and proper manner
8

Tstb-machine Shop Engineer Resume Examples & Samples

  • Perform machining operations following the predefined process from initial requirements to finished item
  • Ensure machining conformity using the definition and the reference part
  • Operate NC/conventional machines to make or modify parts, primarily metal parts
  • Operation to include CNC Machining and Manual Milling, Turning, Forming and Fabrication
  • Regulate and maintain machine, tools, jigs and parts
  • Ensure continuous improvement
  • CNC Programming from CAD Models / Drawings
  • Minimum ONC or equivalent qualification required
  • Fully competent at manual milling, turning and fabrication
  • CNC (Heidenhain) programming experience
  • Experience in measurement techniques (Vernier gauges and micro-meters)
  • Experience of working in a machine shop where high tolerances are key
  • Hands-on practical skills, manual dexterity
9

Machine Shop Lead Resume Examples & Samples

  • Assists Supervisor in planning, coordination and directing the operation of the Machine Shop department
  • Provide adequate training for department personnel
  • Rotates and stores all material per FIFO requirements
  • Operates machines according to job specifications
  • Cleans up around work area during run time
  • Inspects parts for flaws, takes corrective action if needed
  • Completes and maintains all quality process documentation
  • Completes all required safety procedures prior to and during operation
  • Communicates all production related information to shift Supervisor
  • Assists in training of new workers
  • Relieves and fill-ins during lunch breaks
  • Manufacturing experience a plus
  • 5 years’ experience as a Machinist in the same or similar industry
  • 2-3 years in a leadership role
  • Works under close supervision
  • Comprehension of written and verbal communication skills
  • Cad experience preferred
10

Machine Shop Manager Resume Examples & Samples

  • Responsible for the maintenance and manning of the Machine Shop located in the ISI East Coast office
  • Setup/Operate Manual/CNC Lathe
  • Setup/Operate Manual/CNC Mill
  • Fabricate prototype components, fixtures, tooling and equipment. Modify components and assemblies in support of product development engineering
  • Assist with development of tooling
  • Provide design, fabrication and assembly feedback to engineering team
  • Coordinate machine shop activities, set priorities and track progress. Ensure the shop is properly equipped and organized and that the equipment is safe. Enforce safety standards
  • Procure required raw materials, machinery and commercial components required for fabrication of prototype parts and assemblies
  • Coordinate overflow work with local suppliers
  • BS/BA desired
  • Minimum 10 years machining experience of precision metal & plastic parts
  • Ability to read & understand technical drawings
  • Ability to fabricate & measure precision components per specification
  • Experience in successfully utilizing all common measurement tools necessary to carryout core job tasks
  • Setup and operation of Manual Mill & Lathe
  • Experience with automated CNC machining
  • Individual must be careful and safety conscious
  • Good communication and documentation skills
  • Hands on Supervisor skilled at setting priorities and handling multiple projects at the same time and able to work well in a team environment
  • Knowledgeable in a wide variety of manufacturing processes
11

Machine Shop Helper Resume Examples & Samples

  • Duties and responsibilities include the following; other duties may be required and assigned at any time
  • Removes and weighting chips
  • Loads and unloading trucks
  • Set up parts in designated areas to prepare for processing
  • Identifies and ensures that the correct parts are placed in the designated order
  • Assists machine operators with general duties as requested to support the smooth operation of the machines
  • Reports any problems observed to supervisor whether they are related to storage and placing of parts or machine malfunctions, etc
  • Maintaining a safe and organized workstation as follows all safety rules and company policies
  • Sweep floors, clean and dispose of trash when necessary
  • Perform general duty labor as required
  • Cross train as necessary
12

Machine Shop Material Handler Resume Examples & Samples

  • Cleaning and deburring of parts in accordance with work orders
  • Prepare parts for shipment by wrapping, package and labeling parts
  • Maintains documentation on materials and prepares materials for interplant transfer
  • Daily cleans parts and materials for use by machinist and inspects materials and parts
  • As needed prep raw materials to be used by machinists
  • Check/fill coolant level, concentrations and way oil on CNC equipment
  • Perform PM on CNC equipment
  • Empty and clean material chip bins
  • Cut and stage work orders
  • Perform Material cycle count
  • Performs other related tasks as required by supervisor
  • None Listed
13

Machine Shop / D Printing Technician Resume Examples & Samples

  • Repairs and maintains machinery and mechanical equipment, such as motors, pumps, conveyors, belts, fans, air conditioners, etc
  • Examines mechanical equipment to diagnose malfunctions
  • Adjusts, cleans and lubricates parts of mechanical devices as necessary
  • Requisitions replacement parts and equipment
  • Oversees contractors at supervisory/management level
  • Experienced machinist - 5+ years
  • Experienced welder
  • Associate's Degree or Technical Certification
  • Experienced with CNC machining center
  • Excellent skills with commonly used Microsoft Office and Google products
  • Ability to plan and organize shop activities and shift priorities as needed
  • Excellent verbal Communication Skills
  • Excellent Interpersonal Skills
  • Excellent Problem Solving
  • Ability to understand as well as write SOPs and Safety Data Sheets
14

Machine Shop Tech Resume Examples & Samples

  • Recognize the importance and support a strong safety culture
  • Demonstrate the appropriate standard of care for refinery personnel and equipment. Be observant, willing, and have the courage to speak up
  • Be internally motivated and accountable for achieving long-term and day-to day goals and tasks
  • Work effectively, collaboratively, and respectfully on diverse teams, including the ability to share workloads and help others while learning
  • Reliability focused; assist to implement reliability strategies and eliminate defects
  • Understand equipment drawings and use of machine shop software, tools and theory
  • Repair centrifugal & reciprocating compressors and steam turbines
  • Collect and analyse data using the available hardware & software
  • Input data and equipment into systems for analysis
  • Participate in troubleshooting and root cause analysis of equipment failure
  • Wear fresh air gear and respirators as required
  • Execute activities in a safe and environmentally compliant manner consistent with site health, safety, security, and environmental (HSSE) practices and procedures
  • Operate forklifts, man lifts, cranes, and mini-pickers
  • Work safely and effectively with team members and others to achieve reliability and production goals
  • High School Diploma or equivalent (GED)
  • Standing, walking, lifting and carrying up to 30-pounds; bending, stooping, twisting, reaching, stretching, pushing, pulling, dragging 50-yards, balancing, kneeling, crawling, use of hands and feet
  • Climbing ladders and stairs
  • Working in confined space and in high places and withstanding heights
  • Working a schedule of four -10 hour days (M-Th), a rotating 10 hour day mini-shift (Wed-Sat), working overtime and responding to call-outs 24/7-365 days per year as plant conditions require
  • Serving on the Refinery Emergency Response team as needed
  • Must be able to work in and out of doors and in changing weather conditions safely
  • Wearing fresh air gear and respirators as required
15

Machine Shop Tech Resume Examples & Samples

  • 2 year degree or equivalent education
  • MasterCam or CAD software experience
  • Additional relevant education or experience in a maintenance / reliability environment is preferred –such as in a refinery, chemical plant, technical school or the military
16

Machine Shop Hand Finisher Resume Examples & Samples

  • Determines dimensions and tolerances of piece to be machined, sequence of operations and machines required by studying specification, such as blueprint, sketch, damaged part or description of part
  • Plans and executes assignments using machine tools ranging from lathes to mills to computer controlled machine
  • Utilizes precision measuring instruments to check accuracy of work
  • Operates drill presses and other machines where complex setups, fixtures and tooling are furnished by others
  • Operates computer console
  • Uses simple measurement instruments to check work
  • Makes simple adjustments and notifies Machinist
  • Changes out tooling when appropriate
  • Changes out coolant
  • Cleans out Computer Numerically Controlled (CNC) mills
  • Responsible for any other duties deemed necessary by the supervisor
17

Machine Shop Manager Resume Examples & Samples

  • Build and lead a team of Manufacturing Engineer and programmers
  • Be an expert in CNC multi-axis machines, metal-mechanic fabrication technics and tooling that will lead appropriate decisions for cost and schedule at both R&D and higher volume production
  • This position requires 25% programming support and leadership, the rest is a combination of NEW set ups and machine optimization focusing on lead time and cost reduction
  • Work with quality control, manufacturing engineers, finance and production supervisors to improve safety, quality, delivery, cost and inventory
  • Oversee cross training of CNC Operators
  • Work closely with engineering and operations in developing new capabilities for the company’s growth and service to our customers
  • Monitor tooling costs and reports cost savings though process improvements
  • Participates in 5S activities which include keeping area organized, standardizing tools and sustaining the efficient work space
  • Develop specialized processes for the machine shop
  • Deliver professional and timely input to design teams
  • Manufacturing sign-off on controlled drawings and plans
  • Develop and improve Manufacturing BOMs and build instructions
  • Design fabrication tooling
  • Lead the development of robust manufacturing workflow processes in our highly skilled manufacturing environment
  • Support development of workflow, document control and communication processes for global scale
  • Plan internal capability expansion, facilities and capital expense
  • Own the relationship between our in-house fabrication capabilities and the design teams
  • Develop and manage relationships with outside vendor shops in association with design, procurement and quality teams
  • Create a team that is highly approachable, responsible and collaborative
  • Must have minimum of 5
  • Autocad skills
  • 10 or more years of
  • Experience programming
18

Machine Shop Lab Research Tech Resume Examples & Samples

  • 12-24 months of Laboratory/Science or warehouse experience
  • Ability to accurately read and understand written materials and instructions
  • Highly organized and able to handle multiple projects and deadlines
  • Able to communicate well and build rapport quickly with students, faculty and staff
  • Must have mechanical skills in operating warehouse equipment
19

Supervisor, Production Machine Shop Resume Examples & Samples

  • Policy/Contract Management
  • Time and Attendance
  • Productivity Management
  • On-Time Delivery
20

Inspector, Machine Shop Resume Examples & Samples

  • Use measuring tools such as calipers, micrometers, and bore gages to inspect parts to drawings – accuracy and precision to .0001” and closer
  • Perform visual inspection to identify any workmanship or cosmetic issues
  • Perform preservation, packaging & labeling on all jobs
  • Document incoming inspections in accordance with company and FAA requirements
  • Verify paperwork on all jobs being shipped to customers – 100% compliance
  • Assist with receiving, part marking, and assembly as needed
  • High School Diploma, Tech School Preferred
  • 1+ years of experience Machining experience preferred
  • 1+ years as a line level QC inspector required, aerospace environment preferred
21

Machine Shop Machinist Resume Examples & Samples

  • Trade school with formal apprentice training preferred
  • 6-8 years related experience
  • Must be able to fulfill the physical requirements of the job
  • Must be well organized, detail oriented, and time oriented
22

Machine Shop Lead Resume Examples & Samples

  • Directs, controls and manages the Tooling department Dept. Responsible for meeting Schedule, Quality & Cost Targets
  • Works in conjunction with Manufacturing Engineering & other Fabrication Departments to ensure smooth & continuous workflow
  • Makes recommendations to management for the purchase of new equipment as well as repairs & upgrade of existing equipment
  • Makes recommendations for the design & operation of new tooling
  • Trains and develops subordinates on systems and procedures
  • Works with M.E.’s to make process improvements and develop process control procedures
  • Enforces Safety and Company Policies discipline
  • Strong knowledge of Machining process, Materials and tooling required
  • Must have Advanced Blue Print Reading skills
  • Must be Computer Literate on Office Microsoft programs (Excel, Word, Power Point)
  • Must have Ability to trouble shoot and recommend solutions
  • Ability to conduct and assist Performance Evaluations and utilize Goal Setting tools
  • Mold and Die experience required
  • Lean and DFM experience preffered
  • Minimum of 10-15 years experience in Machining and Tooling Fabrication environment
  • Experience in Lean Manufacturing environment and understanding of principles