Industrial Engineer Resume Samples

4.9 (100 votes) for Industrial Engineer Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the industrial engineer job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Resume Builder
CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.
USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.
SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Create a Resume in Minutes
HP
H Pfeffer
Hallie
Pfeffer
2430 Cecelia Estate
Los Angeles
CA
+1 (555) 624 2351
2430 Cecelia Estate
Los Angeles
CA
Phone
p +1 (555) 624 2351
Experience Experience
Los Angeles, CA
Entry Level Industrial Engineer
Los Angeles, CA
Welch-Gislason
Los Angeles, CA
Entry Level Industrial Engineer
  • Improving labor productivity through the development/deployment of best known methods and Lean Manufacturing principles
  • Collaborating with peers in Chandler AZ and Oak Hill TX to ensure consistent approach
  • Working with cross functional teams through problem solving and project execution
  • Collaborate with Design Engineering during prototype, development and first article manufacturing
  • Improving operational efficiency of factory equipment resulting in improved cycle-time and/or increased factory capacity with minimal capital and/or operational investments
  • Clearly and effectively communicate both verbally and in written form to both technical and non-technical audiences, especially regarding manufacturing processes, engineering issues and proposed changes, and quality issues and dispositions
  • Strategic capacity planning – both equipment and staffing
Detroit, MI
Industrial Engineer
Detroit, MI
Gottlieb Group
Detroit, MI
Industrial Engineer
  • Develop and drive the Continuous Improvement Process that improves methods of operation and work standards and improves plant productivity
  • Assist in establishing work measurement programs and analyze work samples to develop standards for labor utilization
  • Work with various teams to develop Standard Work instructions through time observations and associated visual controls for measuring performance
  • Work with operations management to improve performance of staff
  • Develop, evaluate, document and improve methods of operations to work area design, process flow and work methods
  • Define and document standardized work for each cell. Create photo based work instructions for each unit of standard work
  • Creates performance driven metrics and maintains trend analysis to ensure effectiveness of process improvement implementation and quantifies the improvements
present
Houston, TX
Lead Industrial Engineer
Houston, TX
Stark-Jerde
present
Houston, TX
Lead Industrial Engineer
present
  • Establish and manage proactive ergonomic processes that evaluate, recommend and implement improvements to work area, tools and fixture designs
  • Establish and maintain work standards using time studies across all operational processes
  • Analyze and provide solutions for labor cost reduction through process improvements and cost/benefit analysis
  • Create strategy to manage yield process time difference and change set up
  • Creates effective team environment. Is seen as mentor. Influences and models best leadership, where others "follow" and are not "managed"
  • ,Provide cross-functional guidance and expertise and train and develop manufacturing engineers and operation teams with the Industrial Engineering expertise
  • Work with the HSMC capacity analyst and update all models with latest cycle/process time
Education Education
Bachelor’s Degree in Industrial Engineering
Bachelor’s Degree in Industrial Engineering
Colorado State University
Bachelor’s Degree in Industrial Engineering
Skills Skills
  • Excellent knowledge of computers and MS software with a high capability in Excel and Access
  • Good organizational skills and the ability to achieve results through good communication skills and teamwork
  • Ability to drive projects and accept accountability for project progress and quality
  • Excellent interpersonal skills, professional attitude and approach with ability to interact with individuals at various levels of the organization
  • Good of interpersonal skills involving ability to work effectively cross-functionally and cross-culturally
  • Knowledge of administrative aspects of project development, i.e., procurement policies, preparation of work statements and development plans, cost evaluations, etc
  • Knowledge of the theories, principles, practices, methods and techniques of industrial engineering, as evidenced by detailed experience in one or more of the areas of manufacturing, productivity, and quality assurance
  • Excellent ability to communicate effectively in English, both written and verbal
  • The ability to translate research findings/data analysis to actionable initiatives
  • Strong ability to understand, analyze and solve business problems
Create a Resume in Minutes

15 Industrial Engineer resume templates

1

Industrial Engineer Resume Examples & Samples

  • Reduce labor cost or increase revenue to drive OCF improvements through improving operational efficiency by reducing non-value added tasks and processes. Develop and analyze labor requirements, work force utilization, labor budgets, schedules, and hiring/staffing plans that minimize overall labor costs. Develop, test and implement new products, test price and demand sensitivity, make recommendations and implement change to optimize profitability. Establish baseline historical performance, seasonality, transaction volume, revenue, penetration, per capita, pricing etc. Monitor ongoing performance, establish key performance tracking metrics
  • Use Lean and Six Sigma techniques to drive rapid, high impact business improvement throughout the organization. Apply DMAIC methodology to determine root causes, engineer solutions, implement, and institutionalize change
  • Develop and execute data collection studies and obtain data using database query tools in order to perform data mining and data analysis using statistical tools and methodologies
  • Analyze processes using operations research tools including optimization, simulation modeling, linear programming, etc
  • Assist in development of business cases & presentations to be presented from front line stakeholders to executive leadership
  • Strong critical thinking and problem solving skills
  • The ability to work through complex, unstructured problems
  • Capable of communicating and expressing ideas clearly and concisely, in both written and oral formats
  • Strong interpersonal, technical and presentation skills required
2

Industrial Engineer Resume Examples & Samples

  • Participates in the full life cycle of projects as assigned by a supervisor
  • Participates in business process analysis and process improvement on assigned supply chain projects and analyzes end to end business process requirements
  • Conducts process improvement, staffing analysis, facility design, work flow analysis, profit optimization, cost reduction, or other systems studies as needed. Formulates recommendations
  • Conducts studies in operations, such as time studies, to improve productivity
  • Coordinates data collection processes and training to maximize work flow and spatial utilization in 3PL’s and company distribution centers
  • Provides exceptional support to external and internal customers as well as team members
  • Produces written specifications, e.g. System Description Documents and use Case Documents to capture business process requirements
  • Participates in the planning and testing of supply chain applications from a process and functional perspective to verify that all user/customer requirements are incorporated in the design and that the business applications meet end user and company expectations; documents results for quality assurance purposes
  • Ensures that software quality engineering standards are followed prior to project deployment and properly documents project progress according to SOX
3

Industrial Engineer Resume Examples & Samples

  • Minimum of undergraduate degree in Industrial Engineering or other engineering discipline
  • Minimum 5 years’ experience in retail distribution or e-commerce fulfillment
  • Minimum 5 years’ experience in warehouse management and material handling
  • Experience with integration of WCS (Warehouse Control Systems) with a WM (Warehouse Management System)
  • Demonstrated track record of project management skills in engineering and technology projects
  • Excellent communication skills (i.e., verbal, written, group presentation)
4

Industrial Engineer Resume Examples & Samples

  • Research, recommend and implement improved productivity procedures, processes or systems to improve labor utilization in both manufacturing and distribution
  • Develops Production and Distribution layouts, determines manpower requirements, conducts capacity analysis and cost justification
  • Participates as a member of a project team assigned to meet specific objectives
  • Works closely with Industrial Engineers to ensure consistent methods are used in developing and monitoring productivity and that efficient procedures are used
  • Initiates cost reductions and cost avoidance by investiagting and recommending cost reducing manufacturing/dustribution capital equipment or systems
  • Performs other duties as assigned and required
  • Assist the Value Analysis teams in analyzing and developing Value Analysis ideas
  • Analyses are periodically reviewed during phases of the project with manager
  • Provide technical assistance in projects assigned, primarily in data gathering and data analysis phases
  • Simultaneously, perform one to two projects of low complexity
  • Assume project leader on low complexity projects
  • Maximum supersvison required
5

Industrial Engineer Resume Examples & Samples

  • Drive smart engineering (pattern, computer stitching and processes) across multiple product teams of the designated Development centers (1-3 DCs) in ensuring that products consistently exceed customer expectations in respect to fit, comfort, design integrity, performance, perceived value, manufacturability and quality
  • Drive consistent implementation and trouble shoot new process and technology implementation (No Sew, others) across all manufacturing facilities
  • Exhibits “product eyes” and sports competence-have a feel for styling, product cosmetics, product construction and manufacturing technologies in order to influence and drive the overall product direction of the specific category(s) he/she manages
  • Act as LO Resident Industrial Engineering expert responsible for training/teaching and knowledge sharing and continuously upgrading shoes engineering and overall design for manufacturing expertise across the supply chain
  • Give consultation to product teams (Design, Marketing and Development) and external parties (Fty Dev Heads) on smart engineering aspects with overacheing focus on quality and efficiency
  • Good knowledge of shoes manufacturing process
  • Can independently lead LO based projects within defined scope of product / industrial engineering
  • Good interpersonal and English communication skills
  • Ability to effectively interact with different departments (Marketing, Design, Factories) via phone, written communication and in person
  • German, Chinese, Indonesia or Vietnamese language knowledge an advantage
  • Bachelor’s degree in Industrial Engineering, Footwear Sports Science or other manufacturing related degree
  • 4-5 years of technical experience in mechanical engineering, pattern making and automation in lieu of engineer degree
6

Industrial Engineer Resume Examples & Samples

  • Design new facilities, facility retrofits, conveyor changes, and other material handling equipment changes. Implement improvements by coordinating the activities of vendors, internal resources and customers
  • Identify, define, and implement process improvement opportunities. Address all aspects of a process, including people, procedure, systems, and equipment
  • Assist with transportation optimization initiatives
  • Manage budget, schedule, design, and coordinate a wide variety of distribution center improvement projects
  • Help maintain and enhance Kohl's labor management program. Includes definition and refinement of best methods & procedures, time and motion study, coaching, and general program maintenance
  • Bachelors degree in Industrial Engineering or Operations/Processing Management,
  • Previous experience in distribution/manufacturing engineering
  • Experience with statistical analysis, work measurement, and process analysis
  • Demonstrated initiative and drive
  • Confident decision making and leadership skills
  • Proficient in Microsoft Excel and Access
7

Industrial Engineer Resume Examples & Samples

  • Ability to operate independently, manage people and processes, ensure successful delivery from project inception to implementation of material handling and business optimization initiatives
  • Implement warehouse operational processes, material handling systems and the technology to support new business partnerships and/or acquisitions
  • Implement and manage new Labor Management System for the network of Fulfillment Centers
  • Optimize and drive best practices for existing Fulfillment operational processes across all channels (FCs, Drop Ship, International and FLS)
  • Provide support to the network of Fulfillment Centers on variety of operational tasks including order projections and staffing needs
  • Support Fulfillment procurement support for corrugated and other miscellaneous commodities
  • Drive packaging and quality standardization for all fulfillment channels (FC, Drop Ship, International and FLS)
  • Project management includes
8

Industrial Engineer Resume Examples & Samples

  • Demonstrate ability to carry out industrial engineering assignments of a broad nature while exercising considerable judgment and originality
  • Excellent analytical, problem solving, and decision making skills
  • Knowledge of distribution operating systems
  • Strong ability to manage multiple tasks
  • Bachelor degree in Industrial or Mechanical Engineering
  • Must have engineering experience and or education equivalent
  • Must be MOST or MTM certified
  • I.E. Supervisory experience preferred
9

Industrial Engineer Resume Examples & Samples

  • Monitor the daily operational effectiveness and performance of the DC
  • Drive productivity improvements
  • Review and monitor cost per piece performance and work to continuously improve DC performance
  • Analyze Quality and Productivity DC performance metrics
  • Assist in workforce and staff modeling and planning
  • Work closely with DC Leadership to identify opportunities to improve operational effectiveness
  • Act as DC Site Project Manager for material handling equipment (MHE) planning and expansion
  • Responsible for tactical methods engineering and MHE process improvements throughout the DC
  • Work closely with the Supply Chain Strategy group on company and DC initiatives
  • Manage and monitors MHE maintenance and service contracts
  • Ensure PEP program is administered and maintained for the building
  • Ensure all process changes are in compliance with Standard Operating Procedures (SOP)
  • Minimum of BS in Industrial Engineering or related field
  • Distribution Center experience preferred
  • Knowledge of various continuous improvement disciplines and operational/cost analysis
  • Proven ability to work effectively in a team oriented and self-starter environments
10

Industrial Engineer Resume Examples & Samples

  • Impact on Business
  • Lower overall unit cost, reduce overall operational cost whether those costs are directly related to the payroll or operational expenses
  • Increase productivity and efficiency within the warehouse and also improve service to the customers
  • Improve warehouse management decision-making capability
  • Ensures facility efficiency and workplace safety
  • Present and sell recommendations to the Senior Manager Warehousing, Asia and potentially all levels of management
  • Develop and maintain labor standards for designated job functions within the distribution center
  • Configure and maintain the Manhattan labor management productivity tracking software program
  • Customer/Suppliers/Third Parties
  • Serve as an outside consultant to the operation making recommendations to the warehouse management team to improve internal and external processes
  • Assist global facilities in design, configuration, and management of the Manhattan labor management program
  • Interacts with hourly distribution to determine best methods and will also serve as an agent for change within the warehouse
  • Innovation and Change
  • Use proven acceptable engineering techniques and recommend positive change to current and existing processes
  • Analyze complex processes and recommend positive change
  • Must interact with all levels of management
  • Fluent Mandarin and conversational/technical English
  • Broad background in Industrial Engineering technology and application
  • Must be able to identify and evaluate problems and develop improvements to production, packaging material usage and methods of operations by using proven Industrial Engineering techniques
  • Be able to utilize any recognized industrial engineering techniques effectively and produce tangible results
  • Identifying, evaluating, and developing project solutions and recommendations for minimizing total operational costs
  • Project management skills recommended
  • Must be able to influence others
  • Position requires a candidate that has a thorough understanding of work measurement programs
  • Developing and implementing plant direct labor standards for costing, manning, and evaluating performance where required
  • Recommend methods for improving worker efficiency and reducing waste of materials and utilities, such as restructuring job duties, reorganizing work flow, relocating work stations and equipment, and purchase of equipment
  • Performing other special projects or assignments for the Senior Manager Warehousing, Asia
  • Must be able to stand/sit for extended periods and also lift up to 50 lbs periodically
  • Candidate should have a degree in Industrial Engineering or closely related field with 2-5 years experience in a distribution center environment
  • Experience with AutoCad is highly desirable
  • Experience with WMS systems is highly desirable
11

Industrial Engineer Resume Examples & Samples

  • Typically 2-4 years of experience
  • Using empirical analysis, modeling and methodologies to validate manufacturing process and tooling design and specifications
  • Strong written and verbal communication skills; mastery in English and local language
  • Ability to effectively communicate manufacturing plans, proposals, and results, and negotiate options
  • Lean Six Sigma/Theory of Constraints expertise, ability to facilitate Lean events and Training
  • Full suite of Lean capabilities: Kaizen, 3P, 5S, SMED Quick Changeover, War on Waste, Standard Work, Visual Work Space, One Piece Production Flow, Spaghetti Diagrams, Value Stream Mapping
  • Building effective cross-functional teams (Engineering + Ops)
  • Proto and Development Layouts
  • Strategic Space Planning
  • Ergonomics/Human Factors
  • Modeling (Static and Dynamic) – Staffing and Capacity Modeling, Cost Modeling, Discrete Event simulation, Materials Flow, Statistical Analysis
12

Industrial Engineer Resume Examples & Samples

  • Maximum supervision required
  • B.S. Industrial Engineering
  • One to two years experience in Industrial Engineering, Production or Distribution
  • Intermediate PC expertise (Office, Simulation, other databases)
  • Position requires travel to Estee Lauder locations
  • Excellent interpersonal and communication skills required
13

Industrial Engineer Resume Examples & Samples

  • Consult with clients to improve business results through operational planning support, capacity/demand analysis and productivity/process improvement
  • Bachelor’s degree in Industrial Engineering and 2-4 years of applied experience
  • Experienced conducting field studies/data collection efforts and analyses, including familiarity with capacity/demand analysis and modeling techniques
  • Ability to work in a fast-paced environment under changing conditions
  • Understanding of Disney heritage and a commitment to change and excellence
  • Master’s degree in Industrial Engineering, Operations Research, Business or equivalent
  • Experience with consulting or quality improvement teams
  • Bachelor’s degree in Industrial Engineering
14

Industrial Engineer Resume Examples & Samples

  • Researches, recommends and implements improved production procedures, processes or systems to improve labor utilization in manufacturing and distribution. ( 40% )
  • New Product Introduction – works closely with manufacturing in the development of labor standards (20%)
  • Develops Production and Distribution layouts, determines manpower requirements, conducts capacity analysis and cost justification. (20 % )
  • Participates as member of a project team assigned to meet specific objective (10 % )
  • Works closely with other IE’s, Manufacturing and Distribution to ensure consistent methods are used in developing and monitoring productivity and that efficient procedures are use. ( 5% )
  • Initiates cost reductions and cost avoidance by investigating and recommending cost reducing manufacturing/distribution capital equipment or systems. ( 5% )
  • Bachelor degree Industrial Engineering preferred
  • Up to 2 years’ experience in production, distribution or IE
  • PC expertise (Office, Simulation, other databases)
15

Industrial Engineer Resume Examples & Samples

  • Completing Most / Time studies
  • Quoting new business
  • Develop, revise and implement equipment and process layouts
  • Develop, implement and monitor labour standards for all equipment and processes
  • Executing the AQP Process
  • Develop production processes for new programs
  • Responsible for program management
  • Document processes through process flow diagrams, flow charts, PFMEAs, etc
  • Develop Lean Manufacturing standards
16

Industrial Engineer Resume Examples & Samples

  • Researches, recommends and implements improved productivity procedures, processes or systems to improve labor utilization in both manufacturing and distribution. (20 % )
  • Assists in the development and implementation of long and short term Supply Chain strategies. ( 10 % )
  • Assists in the development, recommendation, and implementation of improvement projects and systems for all Plants. (10 % )
  • Develops Production and Distribution layouts, determines manpower requirements, conducts capacity analysis and cost justifications. ( 25 % )
  • Participates as a member of a project team assigned to meet specific objectives. (10 % )
  • Works closely with Industrial Engineers to ensure consistent methods are used in developing and monitoring productivity and that efficient procedures are used. (5 % )
17

Industrial Engineer Resume Examples & Samples

  • 1) Increasing productivity through the management of people, method of business organization, and/or technology
  • 2) Utilizing continuous improvement tools to drive change and improve processes
  • 3) Supporting routine processes concerning management of production routings and standards, sampling, variation reduction, and various financial summaries which aid in financial planning and cost analysis
  • 4) Executing projects whose scope includes capacity analysis, production scheduling, implementation and training, alternative manufacturing and assembly methods, and lean implementation
  • 5) Leading and managing multiple cost reduction projects with responsibility for tracking and reporting on cost reduction targets and status to senior management
18

Industrial Engineer Resume Examples & Samples

  • Creation of functional flow documents, organization charts, process flow charts, and project information/plans to determine functions and responsibilities of resources
  • Assist in the establishment of work measurement programs and analyzes work samples to validate standards for labor utilization
  • Manage and revise new system installations, upgrades, and modifications through on-site personnel or through the use of third party vendors
  • Must have the ability to manage multiple third party vendors and hold them accountable to timelines that cross over and have completion dates that are critical to meet
  • Assist in data entry/analysis and creation of daily/weekly management reports in Access and Excel for cost analysis, financial planning, and job evaluation
  • Participates in implementation of training programs for non-exempt employees as required to implement operational improvements
  • General knowledge in the use of Excel, PowerPoint, Word and Visio
  • Bachelors Degree in Industrial Engineering or related Engineering field
  • Minimum 10 years Industrial Engineering experience in a fast pace Retail/DTC distribution environment
  • Project Management experience essential
  • Proficiency in computer applications such as Auto CAD, Microsoft Excel, Word, PowerPoint and Visio
  • Domestic and International Travel up to 25%
  • Bachelors Degree in Industrial Engineering or technically related field
  • Process Management experience
  • Proficiency in Inventor, WMS knowledge, Access and Manhattan's LMS
19

Industrial Engineer Resume Examples & Samples

  • Analyze and determine best equipment set up and process flow for maximizing processes of parts within a manufacturing environment
  • Organize and conduct observations and analysis of personnel and work procedures to determine motion and time requirements within specific job duties
  • Primary re-designing the facility layout and processes to develop and improve manufacturing methods, assembly methods and quality control standards in an effort to improve productivity and reduce cost structure
  • Lead and influence teams of hourly and salaried personnel in Lean / Kaizen projects in the areas of workstation layout, productivity and safety and quality
  • Develop and maintain operator aid visuals
  • Implement and train employees on new job methods
  • Apply statistical methods and perform mathematical calculations to determine manufacturing processes, staff requirements and production standards
  • Coordinate quality control objectives and activities to resolve production problems, maximize reliability and minimize cost
  • Review production schedules, engineering specifications, orders, and related information to obtain knowledge of manufacturing methods, procedures and activities
  • Study operations sequence, material flow, functional statements, organizational charts and project information to determine worker functions and responsibilities
  • Recommend methods for improving utilization of personnel, material and utilities
  • Regulate and alter workflow schedules according to established manufacturing sequences and lead times to expedite production operation
  • Implement process improvement/development utilizing the Achieving Competitive Excellence (ACE) operations systems (Continuous Improvement/Lean Methodologies)
20

Industrial Engineer Resume Examples & Samples

  • Lead Industrial Engineering projects and initiatives successfully with minimal supervision
  • Work with clients and partners to identify improvement opportunities in their Line of Business to improve Guest and Cast satisfactions as well as business results
  • Apply appropriate Industrial Engineering methodological approach, measurements, tools, and quantitative techniques in the work
  • Provides ‘in-the-field’ support for all the supporting Line of Business
  • Good analytical, problem-solving and presentation skills
  • Team player with strong interpersonal and partnering skills
  • Self-starter able to work in a fast-paced and dynamic environment
  • At least 3 years applied Industrial Engineering or equivalent experience
  • Operational background preferred
  • Bachelor Degree in Industrial Engineering, Operations Research, or equivalent
21

Industrial Engineer Resume Examples & Samples

  • Evaluate, recommend, and help implement staffing models to efficiently accommodate changing demand and processes
  • Apply statistical methods to estimate future department needs and to analyze product/process performance
  • Analyze, design and improve ergonomics within Operations to enhance productivity, reduce fatigue, and ensure a safe environment
  • Analyze, justify, and implement special packaging projects, including tooling and equipment set-up
  • Provide recommendations and analysis for enhancing conveyor control systems
  • Coordinate and lead projects related to continuous improvement within Operations
  • Recommend, design, and test improvements to information systems in Operations to allow for effective information flow
  • Design processes, tools, or systems utilizing and applying knowledge of lean manufacturing and engineering principles
  • Prepare meaningful and actionable metrics, flow charts, and diagrams as needed
  • Be an advocate and teacher of lean principles in non-traditional environments
22

Industrial Engineer Resume Examples & Samples

  • Analyze and determine material delivery methods to improve productivity and reduce cost structure within a high volume manufacturing environment
  • Develop and improve material delivery methods and flow of powered industrial vehicles from material storage areas to assembly lines
  • Organize and conduct observation and analysis of personnel and work procedures to determine motion and time requirements within specific job duties
  • Assist with co-leading teams of hourly and salaried personnel in Lean / Kaizen projects in the areas of material storage layouts, material presentation to operators, productivity, safety and quality
  • Assist with implementing and training employees on new job methods
  • Performing ergonomic risk assessments and making recommendations for risk mitigation, as necessary
  • Partnering with engineering and other functions for new product integrations
  • Designing and maintaining operator aid visuals
  • Using ACE tools to track and improve scrap metrics
23

Industrial Engineer / Labor Estimator Resume Examples & Samples

  • The selected candidate will work all aircraft proposals including Sikorsky mega proposals such as VXX, CRH and Multiyear IX
  • Major labor hour estimating tasks include but are not limited to the estimating of helicopter detail parts fabrication, sub-assembly, major and final assembly, and other direct labor areas. High level of Management visibility
  • Perform analysis, collect data, create reports
  • Maintains technical knowledge by attending educational workshops; reviewing technical publications
24

Global Labor Optimization Industrial Engineer Resume Examples & Samples

  • Ensure alignment with the Ford Production System and the generic organization
  • Drive action and implementation of efficiencies based on processes and methodization with a continuous improvement mindset and approach
  • Adhere to and work with Plant Industrial Engineering Manager to follow the Labor Optimization Strategy, Processes, and Standards for direct and indirect labor in Assembly, Powertrain and/or Stamping Plants to achieve manufacturing cost savings
  • Work with Plant Industrial Engineering Manager and Plant Industrial Engineers to ensure that the plant is developing the rebalance proposal and calendarization by department
  • Develop, analyze, and assist with the identification and implementation of plant productivity improvement actions by department
  • Develop, analyze, and assist with the implementation of plant productivity improvement actions, capacity actions, FPS, Ergonomic improvements, and Health and Safety improvements
  • Review and assist plants with cost saving projects and rebalance plans by completing and evaluating time studies using the MODAPTS tool set as the measurement tool for work standards to ensure consistency
  • Maintain direct and indirect labor status for respective areas and update necessary documentation
  • Verify that current state MODAPTS studies and methods improvements are being conducted
  • Review high confidence plants rebalance opportunities by department
  • Assess plant plan for rebalance task delivery
  • Support the roll-out and implementation of GSPAS, APT and eQPS
  • Ensure plants' engagement and usage of processes and tools by monitoring monthly data and reports
  • Help implement enhanced policies, procedures and toolsets for Plant Industrial Engineers to increase their productivity and effectiveness
  • Assist in delivering necessary training for the Plant Industrial Engineers as required
  • Support labor optimization benchmarking efforts
  • Collaborate and work closely with staff and/or plant personnel
25

Industrial Engineer Resume Examples & Samples

  • Develop, implement and manage innovative solutions to improve customer experience at our retail stores by minimizing non value added activities and enhancing those that add value
  • Leverage existing data and conduct time and motion studies using industry-accepted standards such as MOST to standardize all stores activities ranging from the sales floor to the stock room
  • Make fact-based recommendations on improving the functionality of technology used in the retail stores and partner with Store Ops and IT to implement modifications
  • Be proficient in the practical application of engineering tools such as value stream mapping, process FMEA, quality plans and lean manufacturing concepts such as 5S
  • Manage and supervise new system or process installations, upgrades, and modifications through on-site personnel or through the use of third party vendors
  • Train, assist, and provide support to in-house project partners on all on-going project installs, upgrades and modifications
  • Deliver concrete and prolific results and be able to communicate them clearly across all levels of the organization
  • Be able to deliver results with a solid understanding of company financials, budgets and ROI to ensure all initiatives are aligned with overarching business goals
  • 4 year Bachelor’s Degree in Industrial, Mechanical or a related engineering field; Masters Degree preferred
  • Minimum of 2 years work experience as an Industrial/Process Engineer or Project Manager; Retail store setup and design experience a plus
  • Technical expertise in Excel, Word, Access, Visual Basic and SQL. Experience with operations management systems a plus
  • Ability to communicate with all levels of management in both the verbal and written form
  • Ability to lift in excess of 50 lb., daily exertion, extensive walking, able to climb, seasonal exposure to environment
26

Industrial Engineer Resume Examples & Samples

  • Analyze and determine best equipment setup and process flow for maximizing processes of parts within a high volume manufacturing environment
  • Assist with developing and improving manufacturing methods, fabrication processes, tooling, assembly methods, and quality control standards in an effort to improve productivity and reduce cost structure
  • Assist with co-leading teams of hourly and salaried personnel in Lean / Kaizen projects in the areas of workstation layout, productivity, safety and quality
  • Using lean/ACE tools to track and improve scrap metrics
27

Industrial Engineer Resume Examples & Samples

  • Work with Dynamic Components Management and ACE team to achieve business results required to support Lean / ACE Gold Transformation. Identify and eliminate gaps and track progress towards goals. Put together manufacturing standard work and determine optimal material flow. Present results to Management, ACE office, and executives
  • Lead, support, and implement Continuous Improvement projects and events. Events include VSMs, 6Ss, 3Ps, Setup Reductions, TPMs, Cell Designs, QCPC/DIVE/RRCAs, and Process Certifications as well as general process improvements and cost reduction initiatives. Create event documentation and train participants in ACE as needed to ensure event success
  • Drive to eliminate waste while improving flow. Aim to increase quality, throughput, and on-time-delivery while reducing cost, lead-time, and inventory. Work closely with internal departments and customers to improve the business as a whole
  • Develop tools and reports to help better track and understand key business metrics such as cost, parts tracking, scheduling, labor performance, capacity, manpower requirements, supply/demand, quality/COPQ, etc
  • Monitor & track key metrics daily in order to identify and correct issues as soon as possible
  • Serve as an SME to support business decisions regarding part planning, make versus buy, capacity analysis, machine and manpower requirements, etc. Create cost and labor estimates in support of proposals and offload
28

Industrial Engineer Resume Examples & Samples

  • Researches, recommends and implements improved production procedures, processes or systems to improve labor utilization in manufacturing and distribution
  • New Product Introduction – works closely with manufacturing in the development of labor standards
  • Participates as member of a project team assigned to meet specific objective
  • Works closely with other IE’s, Manufacturing and Distribution to ensure consistent methods are used in developing and monitoring productivity and that efficient procedures are use
  • Initiates cost reductions and cost avoidance by investigating and recommending cost reducing manufacturing/distribution capital equipment or systems
29

Industrial Engineer Resume Examples & Samples

  • Lead in developing tooling standards and verification that sourced tooling meets established standards to include tool follow-up
  • Post secondary education in Industrial / Mechanical / Electrical Engineering where a Bachelor Degree would be an asset
  • Minimum of 3 - 5 years Engineering and Manufacturing experience in the Automotive and/or Automotive Supply Base sector focusing on Assembly Methods, Molding, Coating and Tooling
  • Highly motivated, self- directed, creative, innovative and people oriented person
  • Able to multi-task on several fronts to meet Business Plan objectives
  • Able to drive accountability down to team members through structured requirements, expectations and timelines
  • Good project management , planning and scheduling skills
  • A continuous improvement mentality and the ability to apply this personal capability and knowledge to the companies processes, products, and associates (mentoring)
  • Excellent planning and organization skills
  • Identify and address safety and ergonomic issues, as identified
  • Understanding of Lean Manufacturing Techniques and variable / flexible standards
  • Drive line efficiency improvements ( i.e., 1 piece flow, Synchronous flow, scrap reduction, RPN reduction, internal PPM, reduction of added operators)
  • Prepare and present Capital projects within scope of CI project
  • Effective tooling delivery ( coating systems)
  • Incorporating lessons learned
30

Industrial Engineer Resume Examples & Samples

  • Design the layout for each work cell to promote flow and operator efficiency
  • Analyze demand and model mix to optimize product flow through multiple assembly lines and cells
  • Analyze the current process to identify and remove waste
  • Design flexible workstations to efficiently respond to fluctuating seasonal demand
  • Split work content to balance each line and identify required labor to meet demand
  • Define work content per cell and create visual standard work
  • Define what material is required at each work cell
  • Ensure all operators have all the training and materials in their new work cells to enable them to be successful
  • Maintain layout (in AutoCAD)
31

Industrial Engineer Resume Examples & Samples

  • Consistently demonstrate a positive, professional image and behavior to all Associates, Supervisors and Managers
  • Project Management and consulting services for supply chain strategic initiatives
  • Configuration, testing, and troubleshooting of Manhattan Associates Labor Management
  • Utilize SQL to query data and perform complex data analysis
  • Prepare process/cost analysis
  • Proficient in oral and written communications
  • Undergraduate Degree in Industrial Engineering or related field
  • MS Excel and Word skills
  • Demonstrated experience working in a team environment
  • Excellent communication, analytical and problem solving skills
  • Strong organizational, time management and interpersonal skills
32

Industrial Engineer Resume Examples & Samples

  • Core Industrial Engineering competencies required; including, but not limited to time/motion studies, process flow analyses and improvements, conceptual process and material handling design capability
  • Demonstrate strong warehouse operations knowledge at the functional level of detail
  • Provide analyses of capacity impacts for all divisional projects
  • Provide on going cause and effect analyses
  • Create capacity models, tools and templates for analyses, measurement and ongoing reporting
  • Provide analytical support on projects during conceptual/evaluation phase to assess potential costs and/or benefits
  • Identify capacity impacts to distribution centers associated with varying parameters within the supply chain
  • Develop database models, which simulate distribution operations and estimate impacts to throughput (inbound and outbound) and/or storage capacities due to changes in business requirements
  • Understand and quantify differences between physical and operating capacities within distribution facilities
  • Maintain current capacity utilization metrics for all distribution centers on key operating capacities
  • Ensure consistency of capacity reporting across the division
  • Demonstrated experience in applying core Industrial Engineering practices
  • Knowledgeable of supply chain relationships and volume flows
  • Strong ability to manage multiple tasks with confidence
  • Knowledge of network capacity design software, such as MatLab, Cast, Arena, etc. will be preferred
  • Knowledgeable of distribution methods and operating systems
  • Knowledge of Excel, Access, and PowerPoint
  • 1-3 years of engineering experience
33

Industrial Engineer Resume Examples & Samples

  • Collegiate degree in industrial engineering or related field
  • Minimum 1 years experience in a large scale highly automated Distribution Center operation required
  • Previous experience with Labor Management System (LMS) and Warehouse Management System (WMS) preferred
  • PC experience to include Microsoft Access, Excel, Word, Power Point, and Project required
  • In depth understanding of LEAN practices preferred
  • Excellent interpersonal, conflict resolution, communication and presentation skills required
34

Industrial Engineer Resume Examples & Samples

  • In conjunction with Manager Industrial Engineering, recommend methods for improving worker efficiency and reducing waste of materials and utilities, such as restructuring job duties, reorganizing work flow, relocating work stations and equipment, and purchase of equipment
  • Responsible for running cost analysis as it relates to operational, technological, or labor expenses
  • Partner with Manager Industrial Engineering to make recommendations for investment in new technologies and improvement of efficiency within the warehouse workflow, including warehouse decision making capabilities, workplace safety, and customer service standards
  • Serve as an outside consultant to the warehouse operation by acting as a change agent for the business
  • Responsible for supporting capital projects from conception to final acceptance
  • Ability to work independently under minimal guidance on several projects simultaneously while adhering to specified deadlines
  • Excellent analytical and problem solving abilities
  • Strong project management and organization skills, structured approach to assignments
  • Basic understanding of improvement tools as SIX SIGMA, Kaizen, 5S, time and motion studies
  • Proficient is presentation preparation and use of Excel, PowerPoint, MS Project
  • Preferred 1 – 3 years’ experience in a distribution center environment
  • Background in Industrial Engineering technology and applications
35

Industrial Engineer Resume Examples & Samples

  • Percent loading of resources and equipment
  • 5 Axis Machining optimization
  • Design and sequence of operations
  • Assigned to projects or discreet tasks within as well as outside of functional discipline
  • Must be a self-starter with proactive visions for Continuous Improvement of processes within as well as outside of the manufacturing environment
  • Work with various teams to develop Standard Work instructions through time observations and associated visual controls for measuring performance
  • Analyze and develop percent loads on specific projects
  • Participate in Continuous Improvement activities and drive closure of related activities
  • Strive to optimize shop layout and flow of materials, components, part staging and 5S
  • Ensure best possible methods are established and utilized
36

Industrial Engineer Resume Examples & Samples

  • Executing lean six sigma projects, Kaizens & improvements
  • Implementing Continuous Improvement programs such as 5S, VSM, TPM, Problem Solving, Kanbans & Visual Management
  • Deliver training on Continuous Improvement tools, techniques, and methodologies to staff and leaders
  • Coach and mentor site staff involved in Continuous Improvement activities
  • Perform data analysis to identify opportunities for improvement and make recommendations to management
  • Support teams assigned to implementing the recommendations
37

Industrial Engineer Resume Examples & Samples

  • Works with Sr. Manager of Industrial Engineer, Industrial Engineering and IT consulting teams to design Engineered Labor Standards for Manhattan Associates Labor Management System
  • Responsible for creating an XYZ map, timing vehicles, developing Preferred Work Methods (PWM’s), creating ELS files and configuring the Labor Management System for Engineered Labor Standards
  • Partners with and trains Distribution Operations to effectively implement and Lead Change during Labor Management System implementation
  • Provide analytical support to the Distribution Operations and Strategic Operations team for effectively measuring Labor Management performance, 3YP & 5YP Capacity and CapEx planning
  • Partners with other Distribution IE’s to maintain Process Uniformity and Labor Management consistency across the distribution network, including
  • BA/BS Degree (Engineering Degree or Supply Chain Degree )
  • 3-5 years of Distribution Experience
  • Labor Management experience required, Manhattan Associates Labor Management System experience preferred
  • Analytical In Nature – Ability to compile data, analysis data and develop recommendations on data
  • Working Knowledge of MS Excel, SQL and MS Access
  • Self-Starter, Strong Willingness to Learn
  • Excellent Interpersonal and Communications Skills Required
  • Ability to develop presentations for Sr. Managers, Directors and Sr. Directors
  • Ability to complete work in a timely manner and in short time frames
  • Strong willingness to learn
  • Excellent team player and great UA cultural fit
38

Industrial Engineer Resume Examples & Samples

  • Warehousing optimization
  • Solution / implement automation
  • Factory optimizing
  • Driving operational efficiencies
  • System improvements
  • Analyzing / Presenting data
  • Bachelor’s Degree in Engineering, Industrial Technology, Business or a related discipline
  • Creating AutoCAD drawings and designs
  • Industrial Engineering or related manufacturing experience
  • Knowledge or ITIL certification is a plus
  • Interpersonal skills —ability to work in a team environment, and to confidently interact with individuals at all levels of authority
39

Industrial Engineer Resume Examples & Samples

  • 1) Knowledge, skills & abilities
  • Demonstrates ability to carry out industrial engineering assignments of a broad nature while exercising considerable judgment and originality
  • Strong working knowledge of time/motion studies
  • Good familiarity with process flow analysis and improvements
  • Motivation and ability to manage for results, coach and develop staff
  • Background in root cause analysis / cause and effect
  • Understand and quantity differences between physical and operating capabilities with DC
  • Ability to influence others
  • Ability to act as a catalyst for change
  • Hands on experience with Excel and PowerPoint
  • Bachelor degree in Industrial Engineering or similar discipline with relevant background
  • Experience in Supply Chain/Logistics preferred
  • 1) Manhattan WMoS
  • 2) DLX / Red Prairie
  • 3) RGTI WMS
  • 4) MS Excel, Access, Project
  • 5) Maintenance Connection
40

Industrial Engineer Resume Examples & Samples

  • Working Relationship / Communication
  • Effective working relationships must be maintained with all DC employees and internal and external customers
  • Demonstrates proven written and verbal communication skills in the execution of daily correspondence and methods documentation
  • Displays teamwork abilities and maintains a positive attitude
41

Industrial Engineer Resume Examples & Samples

  • Developing and maintaining product and process Industrial plans for mechanical assembly and composite bond manufacturing
  • Support defect reduction and continuous improvement activities
  • Work with support departments to maintain flow and linkage with program priorities across the business
42

Industrial Engineer Resume Examples & Samples

  • Use lean principles to improve and optimize both operational and business processes in our apparel distribution center
  • Manage multiple projects in a dynamic fast paced environment
  • Self-starter, will be needed to seek out opportunities for improvement and work with the distribution team to make the necessary changes
  • Working with internal groups and guiding large diverse teams
  • Ensuring the process works at the optimum level, to the right rate and quality of output, in order to meet volume needs
  • Ensuring that all aspects of an operation or process meet specified health & safety regulations
  • Understand the nature of continuous improvement pertaining to lean principles
  • Experience in using establishing productivity standards
43

Assc Industrial Engineer Resume Examples & Samples

  • Apply Industrial Engineering techniques (e.g. statistics, simulation, forecasting, optimization) to solve complex business problems
  • A minimum of 1-2 years of applied experience
  • Demonstrated superior analytical ability, conceptual thinking and problem solving
  • Strong computer skills including spreadsheets, databases, statistical and graphics software
  • Broad understanding of The Walt Disney Company and Walt Disney Parks & Resorts
44

Industrial Engineer Resume Examples & Samples

  • Must have a general understanding of functional flow documents, organization charts, process flow charts, and project information/plans to determine functions and responsibilities of resources
  • Set up and Implementation of Manhattan Associates Labor Management System in both Distribution and Manufacturing environments
  • Conducts Training on the Labor Management and Incentive based pay programs
  • Assist in data entry and creation of daily/weekly management reports in Access and Excel for cost analysis, financial planning, and Site/Department productivity
  • Participates in implementation of training programs for non-exempt employees as required to implement operational process improvements
  • Participates in special projects and other duties as assigned
  • 3-5 years Industrial Engineering experience in a fast pace Retail/DTC distribution environment
45

Industrial Engineer Resume Examples & Samples

  • Conducts work measurement across operational processes to establish standards for performance management and set operating goals
  • Assists senior management in deployment and maintenance of labor management systems to optimize workforce productivity and reduce inefficiencies
  • Analyzes labor data, finance data and key metrics to make recommendations to management and conduct cost/benefit analysis
  • Assists senior manager in conducting root cause analysis and develop data analysis tools to support operation management
  • Identify and implement “Best Practices” and “Best Methods”, support tracking of key performance indicators & initiate process improvements throughout the operation including quality
  • Assists senior manager in improving a system of production control, standard operating procedures, ergonomics, safety, quality control and training
  • Performs research, design and development of manufacturing processes including production flow, assembly methods and production equipment
  • Coordinates the manufacturing launch of new/revised products including establishing goals, training team members and evaluating results
  • Carries out process improvement, problem resolution, project management and employee training
  • Bachelor’s degree in industrial or mechanical engineering, operations management, or related field
  • 2-5 years of experience in manufacturing or distribution environment
  • Knowledge of industry standard (lean, 5S, 8D, six sigma, 5Y)
  • Proven ability to utilize and quantify data to make logical decisions and recommendations
  • Results and data driven
  • Autonomous with entrepreneurial mindset
  • Professional and team oriented with ability to work cross-functionally
  • Strong technical capacity
  • Performance and project management capability
46

Industrial Engineer Resume Examples & Samples

  • Facilitate and Drive Kaizen Events tied to Key Performance Indicators
  • Work with operations on the creation, implementation, and sustainment of standardized work as a lean tool
  • Conduct studies and propose improvements to the overall process flow and spatial utilization based on Lean Manufacturing principles
  • Coach Supervisors and Team Leads in problem solving techniques
  • Optimize Overall Lead Time of the Value Stream ( Click to Porch )
  • Act as a cultural change agent to drive CI throughout the organization
  • Engage regularly with Operations staff on status of current projects as well as prioritization of new developments
  • Evaluate ergonomics within the operations
  • Ensure the appropriate methodology, measurements, tools and quantitative techniques (e.g. data collection, simulation, statistics, process flow analysis, etc.) are applied in projects as appropriate
  • Communicate and collaborate with multiple levels of the organization on cross functional activities and report out barriers, solutions, findings and action items to drive projects to completion
  • ­Bachelor’s degree in Engineering.Equivalent experience in Operations with a heavy focus on process improvement will be considered
  • Minimum of 2 years’ experience delivering operational results via engineering methodologies
  • ­Working knowledge of lean principles and problem solving methods
  • Proficient in Standard Microsoft Applications
  • Experience in Logistics, Distribution Centers, and Ecommerce
  • Experience with WMS systems ( Manhattan ) is preferred
47

Industrial Engineer Resume Examples & Samples

  • Interpret production trends and abnormalities in order to determine root causes
  • Answer incoming customer calls, resolving specific questions about specific applications
  • Create process improvements for various business segments
  • Participate in Humana’s Disaster Recovery exercises
  • Bachelor’s Degree industrial engineering, logistics, or business management
  • Strong analytical and creative thinking skills for effective decision-making
  • Experience with Arena and SimCad software
  • Experience in Supply Chain Environment
48

Industrial Engineer Resume Examples & Samples

  • Document the current manufacturing process for Cut & Sew operations and identify gaps in the process
  • Develop Standard Operating Procedures
  • Manage the adherence to, review and update SOP's as and when needed
  • Document deviations from the process and quantify the impact on productivity
  • Define processes for documenting issues and manage the Engineering Change Request (ECR) process
  • Utilize Six Sigma/Lean principles to streamline the manufacturing process flow
  • Develop Standard Work procedures for the different operations
  • Develop standards on personnel count based on historical performance, standard allowable minutes and customer demand mix & quantity forecast
  • Optimize the location of people and process flow through the Cut & Sew operations
  • Engage external manufacturing benchmarking resources and assess manufacturing innovations to create best practices
  • Analyze the single piece flow methodology and develop takt times for different products & collections
  • Utilize linear programming concepts to perform line balancing analyses that help with the scheduling & daily planning with starting/completion dates for the Cut & Sew operations
  • Utilize DMAIC & DFSS methodologies to implement Design for Manufacturing principles
  • Assist in the creation of product specifications and actively participate in new product introductions to the plant
  • 4 year Bachelor's Degree in Industrial, Mechanical or a related engineering field; Master's degree preferred
  • Must have a proven track of results where manufacturing production implementations resulted in improved efficiencies
  • 3-5 years industrial engineering experience in a manufacturing environment
  • Experience/knowledge of process improvement platforms (Six Sigma-Lean) highly preferred
  • Experience with writing Standard Operating Procedures, aimed at simplifying the manufacturing and training processes. Well versed in incorporating best practices into written documents
  • Able to systematically identify root causes, identify and implement corrective actions. Able to justify recommended corrective actions through the analysis of empirical data
  • Proficiency in computer applications such as AutoCAD, Microsoft Excel, Word, Powerpoint and Visio
  • Experience with Microsoft AX production management systems is preferred
  • Ability to deliver engaging, informative, well organized presentations to all levels
  • Naturally curious and passionate about continual improvement in all aspects of the job
  • Proven ability to adapt quickly to ambiguity and allocate time to execute multiple tasks and changing priorities
49

Industrial Engineer Resume Examples & Samples

  • Conduct Job Ergonomics evaluations
  • Analyze problem process constraints and conduct equipment cycle time analysis
  • Review proposed changes in plant layout, processes, material handling, routing, etc
  • Develop cycle line layouts for current and future models using ACAD. Lead job methodization and process allocations
  • Coordinate engineering changes and planning. Conduct value stream mapping and process audits
  • Interface with Production Supervision and the UAW to settle job disputes
  • Must have the ability to serve as a strong and confident technical mentor to the production organization (both hourly and salary)
  • 3+ years’ experience in a manufacturing environment
50

Industrial Engineer Resume Examples & Samples

  • Conduct facility and process design reviews to achieve improved methods, layouts and workflows
  • Establish labor standards through software driven time study, to ensure service commitments are maintained or exceeded and manpower planning are accurate
  • Develop SOPs / work Instructions for all processing areas
  • Evaluate and design new layouts for storage rack, pick module, and other material handling solutions for facility
  • Identifies opportunities and leads process improvement projects to drive cost savings
  • Fosters a culture of continuous improvement
  • Designs and conducts training procedures for new temp employees and continuous improvement roll outs
  • Analyzes labor data, finance data and key metrics to make improvement recommendations and conduct cost/benefit analysis
  • Prepare reports and presentations for senior management, indicating solutions or recommendations based on productivity and time studies and various analyses for logistics process improvements
  • Perform supervisory and managerial functions in a warehouse or distribution center environment
51

Industrial Engineer Resume Examples & Samples

  • 2-5 years’ experience in manufacturing, preferably in automotive setting
  • Enterprise resource Planning (ERP) systems software
  • Design software (AutoCAD, SolidWorks)
  • Advanced Excel (Pivot tables, VLookups, histograms)
52

Industrial Engineer Resume Examples & Samples

  • Works with Gap Inc. service providers’ technical resources to create and implement productivity, throughput and capacity solutions that maximize gain share opportunity, improve service and speed to market, and maintain capacity and flexibility in the company’s supply chain
  • Analyzes methods and procedures of current operations to develop standards and best practices for warehouse operations leveraging engineering techniques and benchmarks from Gap Inc. North America and European operations and Global Engineering Services
  • Drives annual productivity targets in all Asia DCs, ensures accurate and timely distribution of DC productivity information and recommendations for continuous improvement across the region
  • Provides ROI evaluations of all material handling system and capital expenditures based on capacity throughput, labor savings, and facility design
  • Identifies and develops cost reduction opportunities in end-to-end supply chain including sourcing, transportation, regionalization, and stores for the Asia Region by applying logistics engineering techniques and practices while balancing the value of speed to market and service to stores
  • Understands and leverages warehouse management and Gap corporate systems to analyze trends within the facilities and identifies opportunities in inventory, SKU management, and operational capacity
  • Reviews and develops system enhancements for warehouse management systems to best utilize existing technology
  • Strong knowledge of Distribution Center operations
  • Ability to carry out Industrial Engineering assignments of a broad nature
  • Excellent analytical, problem solving, and decision-making skills
  • Prioritizes work and manages resources appropriately
  • Manages work independently and as part of a team
  • Drives change and delivers results
  • Strong communication (English required with Cantonese or Mandarin preferred)
  • 2) Minimum educational level and experience
  • Bachelors degree in Industrial Engineering
53

Industrial Engineer Resume Examples & Samples

  • Extended Health Benefits
  • Team Member appreciation events
  • A focus on safety, health and wellness; including our "Good for You" cafeteria
54

Industrial Engineer Resume Examples & Samples

  • Works with service providers technical resources to make and implement productivity, throughput and capacity solutions that maximize gain share opportunity, improve service and speed to market and maintain capacity and flexibility in Asian supply chain
  • Analyzes methods and procedures of current operations to develop standards and best practices for warehouse operations leveraging engineering techniques and experience from North America and European operations and Global Engineering Services
  • Ensures that all standards and best practices are consistently applied across the Asia distribution network and updated as necessary through monitoring of KVIs and visiting facilities on a regular basis
  • Determines and drives annual productivity targets in all DCs, ensures accurate and timely distribution of DC productivity information and recommendations for continuous improvement across the region
  • Manages design, and ROI evaluations of all material handling system and capital expenditures based on capacity throughput , labor savings, and facility design
  • Develops annual operating plans for DCs in conjunction with in-market Logistics Directors and service providers with a focus on developing engineering capability throughout the region
  • Develop and manage the growth of engineering/technical resources in the Asia region to support the growth of end to end supply chain in the region. Manages responsibilities and tasks of all engineering resources in the Asia region
  • Identify and develop cost reduction opportunities in end to end supply chain including sourcing, transportation, regionalization, and stores for Asia Region by applying logistics engineering techniques and practices keeping in mind the value of speed to market and service to stores
  • Understand and leverage the Warehouse management systems and Gap corporate systems to analyze trends within the facilities and identify opportunities in inventory, SKU management, and capacity
  • Review and develop system enhancements for warehouse management systems to best utilize existing technology managing our warehouses
  • Demonstrates ability to carry out Industrial Engineering assignments of a broad nature while exercising considerable judgment and expertise of the business needs in Asia
  • Ability to influence others, work as part of a team and drive change
  • Strong knowledge of distribution operating systems
55

Industrial Engineer Resume Examples & Samples

  • Optimize current processes within the distribution-order fulfillment centers through the development and implementation of improved procedures, systems, and equipment
  • Develop cost benefit analyses and financial models to support the DC’s requirements, designs, and alternative selections to existing systems
  • Act as a contact for material handling equipment vendors
  • Interact with the V.P. Logistics to develop the DC’s capital and expense budgets
  • Develop and maintain labor standards and the productivity monitoring system for the DC’s
  • Perform time and motion analysis to support production standards
  • Assist with capital improvement projects, including the development and execution of plans to support additional production lines or increased work volume and develop estimates for the equipment, systems, and personnel needed to complete various projects
  • Assist with the preparation of preferred methods and procedures
  • Research ergonomic and safety issues in the facilities and make recommendations for improvement
  • Provide technical support to the Maintenance, Operations, and I.T. departments within the facilities
  • Maintain the DC’s layout, plans, and drawings
  • Develop various conceptual, alternative, and installation drawings
56

Industrial Engineer Resume Examples & Samples

  • Support Manufacturing Industrial Engineering activity for Flat Rock Assembly
  • Drive continuous improvement in safety, quality and productivity
  • Develop action plans as required to investigate and prioritize quality concerns and verify corrective actions on internal processes and supplier processes
  • Lead and conduct process audits to ensure process discipline is consistent with Vehicle Operations guidelines
  • Analyze vehicle inventory root causes; engage in mapping and corrective actions to reduce vehicle inventory
  • Lead role in resolving assembly related concerns
  • Support ISO 14001 compliance and support internal ISO auditing and compliance as required
  • Identify throughput constraints and drive root cause improvements
  • 5+ years of manufacturing experience
  • Bachelor’s degree in Engineering or related field of study
  • Experience with Lean Tools – 5S, Kanban, Poka-yoke, and Value Stream Mapping
  • DMAIC and DMADV (DFSS) Project Methodology experience
57

Industrial Engineer Resume Examples & Samples

  • Identify, quantify, compare, and execute production process improvements to improve
  • Experience with continuous improvement/6 Sigma techniques/Lean Manufacturing/Change management
  • Understanding/awareness of manufacturing systems and methods
  • Leadership/management experience
58

Industrial Engineer Resume Examples & Samples

  • Identify, quantify, compare, and execute production process improvements to drive safety and ergonomics, quality (first pass yield), availability (uptime), performance (cycle time variability), capital utilization, and demand attainment
  • Calculate, propose, and implement new methods and processes for existing production systems
  • Leadership/management experience and/or end-to-end project management experience
  • Experience with industry-standard problem solving methodologies (A3, ATS, UPS), preventive and autonomous maintenance concepts, time/motion study analysis, continuous improvement (6 sigma techniques, lean manufacturing), and change management
  • Experience with applied mathematics and operations research (linear and non-linear programming, stochastic simulation methods)
  • Experience with any/all of the following: simulation modeling software (FlexSim), data visualization software (Tableau), design software (SolidWorks, CATIA), programming languages (SQL, Python, MATLAB, VBA)
59

Industrial Engineer, Lean Resume Examples & Samples

  • Assure clear development and implementation plan of projects, spearhead cross-functional team, develops well planned concept and design, coordinate with external/internal vendors, and deliver results on a timely manner
  • Identify areas for improvement and develop action plan to execute it
  • Understand future production trend or changes in Tesla and use it as leverage for strategy planning, preparation, and budget proposal
  • Establish standards for new processes and support continuous improvement activities
  • Identify areas for improvement in system related issues, propose new and efficient system logics base on the processes implemented
  • Spearhead automation ideas and/or execution
  • Identify and support areas for improvement to measure key performance indicators (e.g. efficiency and productivity measurement) and create dashboards
  • Supports inventory and consumption accuracy through process improvements activities
  • Develop simulation methods to support immediate data analysis
  • Experience applying and using analysis tools, including simulation, time study analysis (dynamic and static)
  • Strong knowledge of systems in a manufacturing or distribution system environment
  • Proven experience on implementation of continuous improvement projects
  • Lean manufacturing principles implementation experience
60

Industrial Engineer Resume Examples & Samples

  • Develop cycle line layouts for current and future models using ACAD; lead job methodization and process allocations
  • Coordinate engineering changes and planning; conduct value stream mapping and process audits
  • 1+ years of manufacturing engineering experience
  • The ability to analyze and resolve issues quickly through route cause analysis and drive change back to the production departments
  • Demonstrate the ability to execute to achieve results, while organizing and managing multiple priorities
  • A proven willingness to take a participatory approach to union relations and be a team player
  • The ability to serve as a strong and confident technical mentor to the production organization (both hourly and salary)
61

Industrial Engineer Resume Examples & Samples

  • Ongoing support and advancement of Lean Manufacturing principles and practices in direct area of responsibility
  • Provision of technical support to Manufacturing teams in their endeavours to initiate and sustain Kaizen/ continuous improvement
  • Provision of training and ongoing support on existing Lean "tool kit", also refining and improving these tools and introducing new ones as appropriate
  • Elimination of waste within manufacturing areas and also in support/ transactional area
  • Work closely with R&D, Process development and Equipment Engineering groups at early stages of product, process and equipment development to ensure that new equipment is designed ergonomically and that new products and processes are "Born Lean"
  • Provide technical support to value stream mapping activities
  • Liaise with EH&S Dept to ensure potential improvements through Lean activity are assessed ergonomically and are aligned with EH&S continuous improvement goals
  • Maintain an up to date database of populated IE tools
  • Reviewing requests for changes to facility layouts and proposing options for review/ approval
  • Work with Facilities Dept and relevant Production Team to prepare final layout drawings and implementation plan
  • Ensure that plant layout drawings are correct and up to date at all times and that "free space" is created strategically to allow for improved flow or and/ or provision for new/ additional production lines to support increased volume/ new product introduction
  • Establishment of standard times through work measurement
  • Preparation and presentation of engineering standard data in line with corporate guidelines
  • Maintaining a verified up to date database of standard times
62

Industrial Engineer Resume Examples & Samples

  • Define the sequence of manufacturing process including material flow, line balance and assembly method for operators, as well as the calculation of the standard hours for new products
  • Determine the capacity of production and process
  • Improve production processes through the application of lean manufacturing techniques to reduce waste, costs and increase the quality
  • Advance line balance
  • Layout change using AutoCAD
  • Ergonomics studies
  • Work station design
  • 5S, 7 waste, VSM, Problem solving. OEE
  • Develop and implement effective work place layouts for the facility on introduction and implementation of projects
  • Support the project team through the timely assessment and acquisition of tools, tooling/fixtures, storage equipment, and material handling equipment
  • Provide Industrial Engineering expertise to all projects
  • Timely completion of projects and reports
  • Cost justification and accountability
  • Process and equipment specification
  • Process and equipment, procurement and implementation
  • Train and assist equipment operators, maintenance technicians in areas of responsibility
  • Troubleshoot and analyze process and equipment performance for improved quality and uptime
  • Environmental compliance
  • Business orientation, strategic thinking, leadership, decision making, project leadership, engineering specific skills
63

Industrial Engineer Resume Examples & Samples

  • Performs time and motion studies for all work stations. Compiles time and motion into a data base. Uses the data base to determine Customer Demand Cycle Time (CDCT). Studies productivity improvement results. Updates data base when processes change
  • Lead Conversion Cost projects
  • Complete Time and Motion Studies
  • Update Line balance charts using Pro Planner
  • Maintain Labor maps
  • Complete ergonomic Studies
  • Design work stations and work station equipment to eliminate waste
  • Complete Safety investigations
  • Establishes labor requirements to product complexity
  • Responsible for operational efficiencies
  • Provides assistance to Manufacturing within area of study and expertise
  • Lead or Participate as an EMS Team Member on workshop teams
  • Work with EMS team members to identify waste in the manufacturing process
  • Work with EMS team members to identify safety improvements in the manufacturing process
  • Work with EMS team members to develop equipment concepts to eliminiate waste and safety issues in the manufacturing process
  • Implement equipment in production areas
  • Work with production operators and production leadership to assure the successful use of fabricated equipment
  • BS Degree - Industrial Engineering or equivalent is required
  • Minimum of 2 years manufacturing experience is required
  • Strong math abilities
  • Strong computer, PC, Microsoft Office skills
  • Able to use Auto Cad, Visio and Project Management Software
  • Good presenting skills
  • Good group facilitation skills
  • Good evaluation skills, applying originality or ingenuity
  • Good organizational skills
  • Ability to work in a team concept
  • Good training abilities
  • Good people skills
  • Good theoretical and practical knowledge of Lean Manufacturing principals
64

Industrial Engineer Resume Examples & Samples

  • Responsible for performing a variety of engineering duties related to the planning and design of manufacturing processes for new products, improving existing methods, initiating design changes for cost effectiveness and complete value add/non value added analysis. Maintain and audit productivity data to assure accurate efficiency and utilization of manpower per labor standards
  • Conduct new product review and feedback for improvements in manufacturability during the initial phases of design through implementation
  • Develop equipment, materials and process performance requirements. Perform vendor searches and equipment evaluation to ensure adequate capability to produce quality product in required quantities at an effective cost
  • Attend process review and safety/ergonomic buyoff meetings for new model processes and support budget development as applicable
  • Standard Time studies & line balance
  • Work stations design, standardized work instructions and manning requirements
  • Pilot run & new models launch supporting
  • Process flow chart & Work Instructions developing
  • Promote lean manufacturing operations with 5S, Poke Yoke, Kaizen, Kanban, TPM, SMED and other initiatives, to continuously improve upon our own records
  • Function as a true change agent to bring about cultural and physical change resulting in long term improvement
  • Analyze new processes and equipment with the intent of achieving continuous improvement of present methods
  • Generates capital investment request (IR's) required for new process implementation and controls expenditures to ensure compliance with timing and budget requirements
  • Develops process documentation and trains personnel on new processes, materials, and equipment
  • Identify and comply with all health, safety, and environmental programs, policies and procedures
  • Build, implement, and maintain PFEP (Plan For Every Part) for assembly lines. Implement Pull Signals, Kanbans and identify opportunities with operations for improved line-side presentation and material flow/replenishment
  • Works directly with operations and other engineers in a team environment for problem solving, buy-in and support of new processes
  • Design layouts, zoning and planning for efficient shopping and delivering processes in warehouse operations
  • Strong aptitude for details
  • Possess the flexibility in reacting to new situations and adaptability for working in a new environment
  • Strong results orientation and positive "can do" attitude with a sense of urgency to get things done
  • Self-starter; a "hands-on" individual who enjoys challenge and is dedicated to getting the job done with minimal support and direction
  • Collaborative leader and team player
  • Ability to listen, capture and translate inputs and new challenges coming from consumers and colleagues interfacing them in the market
  • Characterized by integrity and high professional standards
  • Demonstrated excellence in communication skills for negotiating, presenting and resolving complex and controversial issues and responding effectively to sensitive inquiries and complaints
  • Strong Continuous Improvement mindset
  • Ability to work different shifts and flexible hours to support improvement activities
65

Industrial Engineer / EMS Resume Examples & Samples

  • Works directly with manufacturing engineers in a team environment for problem solving, buy-in and support of new processes
  • Implementation & promotion the lean manufacturing operation, 5 S’s discipline, Poka Yokes design, KAIZEN, KANBAN, TPM, DFP, QUALITY CIRCLES, DMAIC,
  • SMED and other initiatives, to continuously improve upon our own records
  • Work stations design (Layouts)
  • Standardized work sheets & Head counting developing
  • Production tooling purchasing order placing
  • Cost reduction projects leading
  • Development of IE forms, work instructions and procedures
  • Production operators Trainer & New Personnel training helper
  • Equipment and machinery installation assistance
  • Tooling and fixtures design, including tooling and fixtures control
  • Experience in manufacturing environment in areas such as industrial and process improvement engineering and related support areas
  • Significant experience in cross-functional manufacturing processes and thorough understanding of lean manufacturing principles
  • Excellent communication skills and unique ability to provide direction of technical and complex issues to non-technical personnel in a manner that is fully understood and supported
  • Experience in follow up several projects at same time and deadlines, track record of successfully completing projects on time
  • History of successful experience in the development of high performance work teams including establishing training and development processes
  • Computer literate including AutoCAD, Microsoft Office, excel PowerPoint, etc
  • Experience in uptime improvements, scrap reductions process and ownership of area form and processes delivery standpoint
66

Industrial Engineer Resume Examples & Samples

  • Working knowledge of Lean and BPM methodologies
  • Must be able to adjust and enjoy working on both strategic and tactical/detailed projects
  • Working knowledge in Microsoft applications especially Excel and PowerPoint
  • Good communication skills for work in a globally based work group
67

Drone Industrial Engineer Resume Examples & Samples

  • Consulting the development teams on Design for Manufacturing
  • Driving the design transfer process
  • Selecting and qualifying production processes and production equipment
  • Creating assembly instructions, operating procedures and test methods
  • Taking ownership of corrective and preventive actions as well as quality assurance processes
  • Drive improvements based on data analytics: define relevant process measurements & KPI's, and derive necessary actions
  • Leading the transition in close collaboration with our manufacturing team
  • M.Sc. in Engineering or equivalent
  • Experience in industrialization environments with a proven track record of product launches
  • Flexible, dynamic thinker with hands-on mentality
  • Good communication skills to motivate improvements and drive the change
  • Fluent in English and German
68

Industrial Engineer Resume Examples & Samples

  • For correct settings and changes of the data to/in the systems
  • For interface between Kladno and Industrial Engineering teams in other plants
  • For various system improvements in cooperation with production
  • For performing validation of master data, creates missing or corrects existing data
  • For daily support to Supply Chain, Engineering, Logistic Master data, Logistic and Planning
  • Maintenance of the local IE rules and continuous feedback to Global IE and global IE databases (problematic elements, FP novelty issues etc.)
  • Has a proven knowledge or education to handle master data and system related tasks
  • Finished University - ideally with technical background
  • Microsoft office, especially for Excel
  • SAP system knowledge
  • Practice in active use of Lean tools
  • Well IE related system knowledge – Method&Time Measurement, etc
69

Industrial Engineer Resume Examples & Samples

  • Maintain an accurate capacity planning model
  • Assist with the development and maintenance of a plant wide scheduling and inventory system (WMS)
  • Apply time and motion study techniques
  • Apply Operations Research methods to create operational optimization models
  • Assist with
  • WCM project management
  • Training of improvement analysis techniques
  • Evaluating "what if" changes to operational processes and product design
  • Perform process modeling and analysis using value stream tools
  • Participate in Six Sigma projects
  • May require working any shift, overtime, weekends and occasional travel
  • Participate in all Magna and Decostar required training
  • B.S. degree in Engineering (required)
  • Six Sigma Green Belt (preferred)
  • Basic understanding of 8D, FMEA, APQP and SPC
  • 5-10 years’ experience
  • Proficient in AutoCAD 13 or higher
  • Must be a self-starter, open minded and a team player
  • Ability to achieve results using Industrial Engineering methods, Lean Manufacturing/TPS tools, and Six Sigma analysis
  • Be able to adjust to changing needs and conditions
70

Industrial Engineer Resume Examples & Samples

  • Bachelors Degree in Industrial Engineering or technically related field required
  • Minimum 3-5 years Industrial Engineering experience in a fast pace Retail/DTC distribution environment required
  • Minimum of 1 year labor management experience
71

Industrial Engineer Resume Examples & Samples

  • Master’s degree, in Industrial Engineering, Data Science, Statistics, Predictive Analytics, Applied Mathematics, Operations Research or related quantitative field required
  • Must be able to maintain multiple simultaneous projects, working alone or in a team setting
  • Proven group facilitation, strong oral and written communication skills, and strong interpersonal and collaboration skills
  • Ability to interact professionally with healthcare clients and develop projects directed at solving problems as well as communicating solutions
  • Ability to articulate innovative ideas to senior Researchers and strategic business partners
  • Ability to travel up to 50%; passport required
  • Excellent computer skills required, including Microsoft Office Suite, Simulation Software (preferably Simio). SQL preferred
  • Minimum of 5 years’ experience working in scalable discrete event simulation and/or dynamic simulation and optimization in healthcare process improvement or similar healthcare consulting role preferred
  • Experience with techniques and technologies for accessing and analyzing big data considered to be a bonus
72

Industrial Engineer Resume Examples & Samples

  • Implement and support Lean/Kaizen tools in Production like Value Stream Mapping, Gemba, 5S, Kanban, Problem-Solving
  • Identify efficiency and rationalization potential to meet productivity targets
  • Analyze and optimize process-, material- and information-flow between production sites and departments
  • Reduce production waste, optimize workspace and throughput to improve production capacity
  • Enhance KPI system, Daily Management Boards and Goal Tree
  • Support strategic planning, stretch-goal-activities and bench-mark-analysis
  • Identify root causes for financial variances and initiate corrective and preventive actions
  • Lead strategic production projects (e.g. eBR, UDI)
  • Support investment and engineering activities and related projects
  • University degree/certificate or Master in Business Economics and/or Engineering
  • Very good English (written and spoken)
  • Preferred 1-3 year experience in business
  • Well experienced in IT applications, especially Excel, preferred SAP R/3
73

Industrial Engineer Resume Examples & Samples

  • Proficient in statistical analysis processes and understands how and when to apply them based on the situation and specific needs
  • Understands the organization and client goals and the reasons for those goals; begins to articulate linkage between business goals and what that means for organization practices. Participates in solving business problems
  • Provides leadership to help clients achieve sustainable results
  • Leads the design of leading edge approaches and solutions utilizing broad knowledge, best practices and benchmarking. Contributes to strategic decisions
  • Works with moderate consultative oversight, leads others in project management functions
  • Assumes responsibility for quality of service and advice in meeting customer and business partner needs
  • Provides internal professional leadership
  • Facilitates interviews, focus groups, and workshops
  • Understands and makes observations on market specific implications of business strategies
  • Professional with strong organization, communication, and administrative skills
  • Ability to think conceptually, analytically, and creatively
  • Ability to manage and utilize project teams effectively
  • Ability to manage relationships with internal and external partners
  • Ability to analyze data and apply it to problem resolution or process improvement
  • 2-5 years of experience in statistical analysis
  • 2-5 years of experience in the use of industrial engineering methodology to conduct research
  • 2-5 years of experience leading projects and managing resources and timelines
  • Proficiency with MS Office Suite
74

Industrial Engineer Resume Examples & Samples

  • Drive facility layout and design projects with the Process Development Engineering, Production, Facilities and Manufacturing Engineering teams (as directed by site)
  • Coordinate and initiate lean projects (i.e. Lean Production, Lean Support and Born Lean) with the Production, Process Development, Manufacturing Engineering and support functions
  • Perform general engineering tasks, which may include: updating standards, maintaining BOMS and routers and creating and approving change requests (as directed by site)
  • Develop and conduct lean training programs for employees at all levels and departments
  • Create and maintain a Lean toolkit that can include: 5S, Kaizen, quick change over, value stream mapping, mistake proofing and line balancing
  • Work cross-functionally with other departments to accomplish tasks, etc
  • Participate in inter-site initiatives
  • May provide work direction or mentor intern or co-op members of the Industrial Engineering team
  • Identify key VIPs (Value Improvement Projects) using the Lean and Six Sigma tools
  • 2-4 Years Relevant Experience with Engineering Degree. Industrial Engineering/Manufacturing Technology degree preferred; Mech Eng/Biomed Eng or similar also acceptable
  • Working knowledge of lean principles including Value Stream Mapping, 5S, waste reduction
  • Ability to perform time studies, work content vs takt time graphs, visual staffing plans
  • Supervisory experience (small team, 3-6)
  • Working knowledge of Six Sigma/statistical methods
  • Demonstrated self starter
  • Background in high volume/medical manufacturing
75

Industrial Engineer Resume Examples & Samples

  • Utilizes Industrial Engineering (IE) and project management skills and principles to develop plans, lead and direct projects including feasibility, constraints, processes, schedule, cost and risks
  • Conducts studies or other work packages within and/or across programs, organizations or manufacturing business units to develop justifications for capital assets requests and/or process improvements
  • Works process improvement projects, or program initiatives
  • Supports leadership in managing program and organizational activities
  • Develops solutions to a variety of problems of moderate scope and complexity
  • Refers to policies, procedures, and practices for guidance
  • Contributes to the completion of organizational projects and goals
  • Participates on cross-functional project teams
  • Works under general supervision
76

Industrial Engineer Resume Examples & Samples

  • Applies Industrial Engineering concepts, techniques, analysis and decision tools under general supervision to promote and assist in implementing changes in manufacturing, engineering and service operations
  • Assists in developing models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers)
  • Applies general industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements
  • Assist in research, design, development, improvement and implementation of processes to enhance schedule performance, lower cost, and improve quality, through the application of Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization
  • Under general supervision, manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation)
  • Provides support to project completion. Utilizes engineering methods (e.g., mathematical models, simulation, statistics) to support the development of optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Under general direction, analyzes and designs value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout)
  • Experience working in a manufacturing environment as an industrial engineer or equivalent course work
  • Lean manufacturing experience or equivalent course work
77

Industrial Engineer, Mid Resume Examples & Samples

  • 2+ years of experience with providing subject matter expertise with operational improvements, including BPR, Six Sigma, LEAN, or performance evaluation
  • Experience in management and the optimization of numerical methods, enterprise transformation, strategic planning, financial analysis, budgeting and planning, or other quantitative roles
  • BA or BS degree in Science, Technology, Engineering, or Mathematics required
  • MBA, MPP, MPA, or MS degree a plus
78

Industrial Engineer Resume Examples & Samples

  • Experience with production planning, working with vendors, and sourcing components
  • Experience with Microsoft Office products, primarily Excel
  • Ability to write clear and concise documentation of work of the team
79

Composites Industrial Engineer Resume Examples & Samples

  • Plan and establish sequence of operations to fabricate and assemble manufacturing parts or products and to promote efficient utilization
  • Review manufacturing schedules, engineering specifications, orders, and related information to obtain knowledge of manufacturing methods, procedures, and activities
  • Estimate production costs, cost saving methods, and the effects of production design changes on expenditures for management review and action
  • Coordinate and implement quality control objectives, activities, or procedures to resolve manufacturing production problems, maximize reliability, or minimize costs
  • Develop manufacturing methods, labor utilization standards, and cost analysis systems to promote efficient staff and facility utilization
  • Communicate with management and manufacturing personnel to develop production and design standards
  • Draft and design layout of equipment, materials, and workspace to illustrate maximum efficiency using drafting tools and computer
  • Study product requirements and design manufacturing and information systems to meet requirements
  • Develop management control systems
  • Apply statistical methods and perform mathematical calculations to determine manufacturing processes
  • Create sampling procedures and designs and evaluate effects of product design changes
  • Evaluate accuracy of production and testing equipment
  • Study and rearrange org charts, material flow, and operations sequence
  • Experience with Lean/Six Sigma Manufacturing methodologies for waste reduction, 5S, Standard Work, TAKT, Pull System, single piece flow, Value Stream Mapping, cell design, and manufacturing flow
  • Proficient with Microsoft Office Word, Excel, Outlook and PowerPoint
80

Industrial Engineer Resume Examples & Samples

  • Basic knowledge of Production Operations
  • Highly proficient in MS Office suite of tools
  • Ability to work under very general supervision and contribute to daily site decision making
  • Knowledge of Microsoft Project and Access
  • Ability to rapidly create performance metrics and executive level presentations
  • Ability to lead and coordinate actions amongst cross-functional groups
  • Excellent organization, communication, and time management skills
  • Greenbelt certified
  • Production Operations (Shop Floor) experience 2+ years
  • Advanced experience using MS suite, including Access, Excel, PowerPoint, and Project
  • Thorough understanding of Earned Value Management
81

Industrial Engineer Resume Examples & Samples

  • Optimize sequence of operations and work flow
  • Create shop floor crew plans to ensure resources are properly allocated and utilized effectively
  • Work to improve efficiencies through waste elimination and process improvements
  • Production Operations (Shop Floor) experience
  • Advanced Microsoft Project experience (4 plus years)
  • Production Scheduling experience (7 plus years)
  • Experience with ERP/MPR Systems
82

Industrial Engineer, Components Resume Examples & Samples

  • Generation and maintenance of industrial product files across all of GTS product lines
  • Manage publication of engineering Bills of Materials (BOM) – conversion and control of BPMs in the ERP system. Creation of production BOM from Engineering BOM
  • Component creation in, and interface with, Group TCIS database and other relevant tools
  • Owns the Materials Master for Engineering in SAP
  • Ensure required documentation is produced and approved at the appropriate levels and is in accordance with Chorus 2.0
  • Review of Engineering Change Notes, concession requests, non conformance reports and generation of data to support reliability engineering activities such as FRACAS (Failure Reporting Analysis and Corrective Action System), DRACAS (Data Reporting Analysis and Corrective Action System) or validation of FMEA (Failure Mode and Effects Analysis) Trees
  • Training engineers on Components
  • Management of product End of Life and component obsolescence
  • Provide support to Purchasing & Supply Chain on bids and projects
  • Communication and presentation
  • Persuasive personality with the ability to communicate at all levels within the business a
  • Self Starter with well-developed organisational skills
  • Experience of production systems (IBS, PDM, DIPS, Chorus )
  • Knowledge of Improvement Techniques (e.g. DFMA, Value Engineering, Kaizen, 5S, Lean)
  • Experience of Microsoft Office (Excel, PowerPoint, Word etc)
  • Understanding of Manufacturing process improvements
  • Experience of working in a component engineering or similar role
  • Minimum of ONC, however Engineering degree, or equivalent would be desirable
  • High standards of numeracy and literacy
83

Industrial Engineer Resume Examples & Samples

  • Ability to travel to support engine plants in multiple locations in North America and China
  • Good working knowledge of STDS and Pillar Charts and other job task analysis tools used in measuring efficiency in assembly and machining operations
  • Possess a good working knowledge of ergonomic best practices and specification guidelines
  • Good working skills in AutoCad
  • Sound computing skills in MS Office and Outlook
  • Ability to work with production team to analyze TAKT time requirements, line side inventory locations, develop error proofing methods, etc
  • Ability to develop Job Element Sheets and Standard Operating Sheets (JES’s and SOS’s)
  • Develop performance reports (time studies, etc.) and provide recommendations to client
  • Support all SPQRC (Safety, Productivity, Quality, Responsiveness, and Cost) initiatives as defined by the client
  • Bachelor’s degree or equivalent experience
84

Industrial Engineer Resume Examples & Samples

  • Experience with labor standards
  • In depth knowledge of Manufacturing and Production Warehousing and Transportation Operations
  • Thorough understanding of computer systems and the ability to generate reports and findings
  • Experience with implementing engineered labor standards in a union environment preferred
  • Experience with Production Management Systems highly desirable
  • Excellent written, oral, and interpersonal skills
  • Strong mathematical/analysis skills including statistical analysis and simulation skills
  • Strong ability in public speaking and presentation
  • 60% travel
  • Conduct industrial engineering labor studies
  • Establish computer based productivity labor standards
  • Develop methods for tracking and reporting Manufacturing and Production key performance indicators
  • Train operation staff on techniques of work sampling and engineer standards and development
  • This includes how to thoroughly investigate issues or complaints that come up and how to check their validity
  • Conduct labor training orientation at division level
  • Analyze and develop distribution cost improvement opportunities
  • Evaluate and advise manufacturing management on potential operational improvements
  • Conduct labor audits and time studies to validate and ensure the reasonableness and soundness of all implemented Labor standards
  • Facilitation of lean events and audit for compliance for Lean and 5S
  • Compliance for COOL
  • Compliance for Sarbanes and Oxley
  • Develop and facilitate management training sessions
  • Audit and ensure selector accuracy for the division
85

Student Industrial Engineer Resume Examples & Samples

  • Completion of Sophomore year of college/university studies
  • U.S. citizenship and ability to obtain and maintain a government security clearance
  • Demonstrated written and oral communication skills
  • Positions within this classification require varying degrees of computer knowledge and skill
86

Industrial Engineer Resume Examples & Samples

  • Bachelor of Science degree in Engineering or other STEM-related degree plus 3 years of experience in operations - OR - a Master's STEM-related degree with 2 years experience
  • Technical experience working in a manufacturing/production environment
  • Discrete manufacturing experience
  • Bachelor of Science degree in Engineering or other STEM-related degree plus 5 years of experience in operations - OR - a Master's STEM-related degree with 3 years experience
  • Degree in Industrial Engineering
  • Professional experience in industrial engineering
  • Experience with SAP or other Enterprise Resource Planning (ERP) system
  • Experience in defense, aerospace, or automotive industries
87

Industrial Engineer Resume Examples & Samples

  • Lead high impact projects to improve business processes, factory productivity, and IE systems across the Recording Heads Organization
  • Hold capacity planning responsibilities to support both Operations & RD manufacturing needs on complex vacuum deposition tools
  • Develop industry-leading Operations Research methods to make better, faster business decisions with a collaborative team
  • Support the business using financial and decision analysis for prioritization and justification of high value projects and capital purchases to gain senior management buy-in
  • Operations Research: Previous course work or experience furthering the application of advanced analytical methods such as discrete-event modeling, optimization, queuing theory, or mathematical modeling to make better and faster business decisions
  • Prefer experience in a wafer cleanroom fabrication environment
  • Prefer Six Sigma Brown or Black Belt certification and related project experience
  • Prefer experience in data analytics and/or systems engineering involving data mining, report automation, and interacting with Oracle/SQL
  • Prefer experience or course work in Project Management
  • Prefer experience or course work in these areas: cycle time reduction, bottleneck mitigation, queuing theory, linear programming, and/or optimization
  • Prefer experience using AutoCAD
  • Prefer proficiency in Google applications (Forms, Sheets, Sites)
88

Industrial Engineer Resume Examples & Samples

  • Interface with production managers during the development phase to validate all steps of the manufacturing process
  • Associates degree in related engineering discipline (i.e. EET, MET)
  • 0-5 years of related industrial engineering experience
  • Experience with electrical fields, motors
  • Familiarity with tooling design and 3D software
  • Good mechanical or electrical aptitude and desire to be hands on in the manufacturing area
  • Knowledge of drafting and CAD tools including AutoCAD, Pro-E, CATIA, Solid Works or other similar software
  • Proficiency with MS Office applications
  • Strong communication skills with English language proficiency
  • Ability to work effectively on cross-functional teams and interface with all internal and external stakeholders
  • Requires up to 10% travel (domestic and international)
  • Experience with 3D modeling tools
  • Experience in production floor or facility layout
  • Knowledge of propulsion
  • Knowledge of CNC programming
  • Experience with SAP or other ERP systems
  • French language skills
89

Industrial Engineer Resume Examples & Samples

  • Performs Methods Engineering analysis including process design, time and motion study, and recommends manufacturing line improvements
  • Participates and or Leads in I.E. projects and programs within areas of responsibility. Assists in the implementation of these projects into business with quality tools, supporting processes and ongoing measures for success. Provides cost analysis and return on investment calculations associated with project selection
  • Conducts/Leads ergonomics / human factors evaluations, recommends and implements improvements to work area designs
  • Develops/leads and implements manufacturing facility design of plant layout, material handling systems, material staging and warehousing as desired
  • Supports new products introductions by providing PLC/ePLC deliverables which include manufacturing line design and set up, material flow design, new tooling development and deployment of specialized tooling and fixtures
  • Serves as a role model and sets the example, whose behavior is emulated by other engineering team members. (Safe behavior, follow proper protocols and procedures, including core values)
  • Calculates and maintains capacity data for materials processing, people, space, and equipment associated with production. Provides guidance to manufacturing and logistics related to effective and efficient use of assets and production processes
  • Establishes standards and procedures for assigned areas of responsibility
90

Industrial Engineer Resume Examples & Samples

  • Bachelor's degree in Industrial Engineering or Industrial Technology or currently pursuing a degree in Industrial
  • Ability to interface with all levels of management and labor
  • Must be self-motivated
  • Proficient in Microsoft Office
  • Ability to work any shift, overtime and some travel may be required
  • Experience implementing World Class Manufacturing in a union environment
  • Knowledge of time study/standards, ratings, MODAPTS, ergonomic evaluations, MTM-UAS, budgets
  • Assembly launch experience
  • Kitting and indirect labor experience
91

Industrial Engineer Resume Examples & Samples

  • Must have good analytical, written and verbal communication skills
  • Must have good computer skills (Microsoft Office, FIS, CMIS ODMIS, etc.)
  • Experience in implementation of World Class Manufacturing in a union environment
  • Knowledge of time study/standards, ratings, MODAPTS, Ergonomic evaluations, MTS-UAS, budgets
  • Industrial Engineering experience in a manufacturing environment
92

Industrial Engineer Resume Examples & Samples

  • Minimum 8 years' experience in manufacturing
  • Previous industrial engineering experience, with an emphasis on material delivery labor requirements planning
  • Excellent data management and analytical skills
  • Good working knowledge in material delivery methodologies
  • Understanding of QC process/methods related to human error management
  • Ability to work and interact with cross-functional disciplines (Transportation, Packaging, Material Flow, Plant/Corporate Industrial Engineering/etc.)
  • Possess strong oral, written, presentation and organizational skills
  • Previous database development/maintenance experience
  • Bachelor's degree in Industrial Engineering, Manufacturing Operations or Supply Chain Management
93

Industrial Engineer Resume Examples & Samples

  • Bachelor's degree in Engineering or related technical field
  • Minimum of 4 years of Industrial Engineering experience in manufacturing
  • Demonstrate knowledge of predetermined time standards and methods
  • Self-motivated, results oriented and capable of working in a team setting
  • Demonstrate good analytical, written and verbal communication skills
  • Proficient in Microsoft Office Excel, PowerPoint and SharePoint
  • Bachelor's degree Industrial Engineering
  • Knowledge of supporting material handling activities in a vehicle assembly plant
  • MTM-UAS or MODAPTS certification
  • Experience with World Class Manufacturing (WCM) in a union environment
  • Data collection, root cause analysis and practical problem solving skills
94

Industrial Engineer for Cable Accessory Kits Resume Examples & Samples

  • Must have a minimum closed commercial education or degree in engineering/business administration
  • Minimum 5 years of total professional experience
  • Should have had previous experience within Data Management, Industrial Engineering or Operations
  • Needs to have detailed knowledge on SAP and Master Data Management processes
  • Has a proven track record of successfully running x-functional projects (Six Sigma is a Plus)
  • Excel Super User
  • Has demonstrated his/ her ability to drive Data Integrity and process efficiency in a complex system environment
  • REFA certified
  • High Level of verbal and written communication, English and German required
  • High flexibility, service orientation and self-reliance are essential
  • Must be willing to Work in a diverse team
95

Industrial Engineer Resume Examples & Samples

  • Establish and maintain best demonstrated practices throughout Industrial Manufacturing
  • Practice and Drive continuous improvement efforts
  • Assist Product Management in Project Justifications and Cost Reductions
  • Practice LEANPD/TEOA initiatives
  • Guide Manufacturing Development in Project Quoting and Manufacturing location selection
  • Work with other functions (Project Managers, Process Engineering, Operations, Quality etc) interpret their needs and requests and turn into workable and cost effective Manufacturing solutions
  • Support Industrial Sustaining / Manufacturing groups as required
  • Work closely with Management to help execute best practices and standardization across TE and one of our recent acquisitions
  • BS degree in science, engineering, or manufacturing
  • Demonstrated expertise in quality concepts, practices and procedures
  • Strong interpersonal and communication skills are required
  • Strong computer skills with proficiency in Microsoft Excel, Word, PowerPoint
  • Two or more years Industrial engineering experience
  • Knowledge of SPC/Six Sigma and other improvement techniques
  • Critical thinker, holistic view of business
  • Manufacturing background to understand production processes the factory and its functions
  • Project management minded, working under time, budget and resource pressures
96

Industrial Engineer Resume Examples & Samples

  • Facilitate production and business process kaizen events to improve quality, cost, delivery and safety
  • Develop and apply lean tools such as line balancing, mistake proofing, value stream mapping, pull systems, changeover reduction, statistical analysis, standard work, line flow design, strategic planning
  • Lead cross functional projects requiring problem solving or process improvement roadmaps and tools
  • Coordinate and lead facility layout and workstation design projects to reduce work content, improve line or facility flow and optimize space requirements for equipment and people
  • Apply knowledge of product design, production and business processes to proactively identify improvement opportunities across the value stream
  • Coach lean culture and operational excellence principles across site
  • Establish labor standards for product costing
  • Develop and facilitate Lean training programs for employees at all levels and departments
  • Continually build and apply technical knowledge discovered through benchmarking and continuing education opportunities
  • May supervisor co-ops and interns or mentor other team members
97

Industrial Engineer Resume Examples & Samples

  • Positions in this function are responsible for end-to-end business process activities reviewing, creating, controlling and improving business processes
  • Assist leadership team in establishing project strategies, developing project plans, and cost/benefit analysis to ensuring project success
  • Provide analysis for identifying business requirements, specifications, design requirements, and testing efforts for process improvement, technical, and analytical projects
  • Recommend methods for improving utilization of personnel, deployment of technology, and tool development
  • Manages junior level Industrial Engineers and peer team members at the sub-project level, monitors goals and workflow, and is responsible for providing feedback on the performance
  • Bachelor’s degree in Industrial or Systems Engineering or Engineering/Mathematics degree with Process Engineering experience. 4 years of process/industrial engineering experience can be substituted for a degree
  • Leadership experience in any industry
  • Experience with documenting processes, creating and deploying process documentation standards, and process documentation governance procedures
  • Experience applying statistical methods
  • Intermediate or greater proficiency with Microsoft Excel, Visio and PowerPoint
  • Excellent communication, time/project management, problem solving, organizational, and analytical skills
  • Available for up to 10% travel
  • Master’s Degree in Industrial Engineering or Mechanical Engineering
  • Experience applying industrial engineering fundamentals in a service industry preferred
98

Industrial Engineer Resume Examples & Samples

  • Conduct Time studies and standards assessments per PMP6012 (UTAS Standard)
  • Perform metrics reporting and tracking
  • Coordinate business objectives and activities to resolve production problems, maximize process reliability, reduce variation, improve productivity and minimize cost
  • Create, develop and update process routings in Solumina / SAP. Communicate standards with leadership / management and team associates
  • Support capacity analysis. Provide output containing the analysis for the specified assignment with all assumptions documented
  • Perform variation analysis. Provide output containing the variation analysis for the specified assignment with all assumptions documented
  • Support/lead lean transformation e.g. (process charts, process maps, 3P’s, etc.) including ACE/Kaizen/VSM events and continuous improvement meetings
  • Confer with suppliers, team members, functional groups and management personnel regarding purchases, procedures, product specifications, manufacturing capabilities, and project status
  • Draft and design layout of equipment, materials, and workspace to illustrate maximum efficiency, using ACE/Lean manufacturing/Continuous Improvement tools
  • Create/Review production schedules, engineering specifications, orders, and related information to obtain knowledge of manufacturing methods, procedures, and activities
  • Lead and facilitate
  • Support transitions from limited production to serial production processes
  • Design and execute creative solutions for manufacturing standard work and cell design and integrated material logistics
99

Graduate Industrial Engineer Resume Examples & Samples

  • Strong understanding of capacity and demand planning fundamentals. This will be at the core of all activities
  • Strong organisational, prioritisation, planning and time management skills
  • Ability to effectively communicate ideas using written and verbal means at all levels of management and across diverse functional teams (manufacturing, finance, construction, install) while being able to apply active listening skills to deliver consistent results
  • Ability to summarise significant information to concise executive summaries and recommendations (presentation skills)
  • Strong project management and negotiation skills in order to negotiate key deliverables or support between multiple organisations
  • Ability to work in an ever changing environment and performing within a team / culture which includes: excellent tolerance of ambiguity, setting expectations, driving accountability, possesses excellent teamwork, demonstrated leadership and team oriented
100

Industrial Engineer Resume Examples & Samples

  • Day to day technical support for the resolution of build problems, including authorisation of Non Conformance Reports when the documented build process cannot be followed, and authorisation of amendments to Production documents
  • Design and documentation of the build process including
  • HNC Mechanical- or Electrical / electronics or equivalent combination of education and work experience
  • Knowledge of manufacturing processes with experience in project management and six sigma methodologies preferred
  • Ability to use a CAD –Solid Edge / equivalent drawing package
  • Dynamic and willingness to learn and open to new ideas
  • Excellent skill in verbal and written communication
  • Must be a good motivator and be able to communicate with all levels of the business
  • Must be able to use Microsoft Office applications
  • Current valid passport with the ability to travel domestically and internationally
  • Current driving licence
101

Industrial Engineer Resume Examples & Samples

  • Utilize Lean manufacturing principles to support production
  • Lead plant standardization initiatives
  • Use PFMEA, time and method studies, and other tools to improve standard work
  • Support frontline idea system
  • Oversee the plant monthly cycle count program and coordinate the annual physical inventory
  • SAP/New product setup
  • Create bill of materials, routings and production versions in SAP
  • Add new products to the shop floor information system database
  • Involvement in new RFGen implementation
  • Make scrap, misc. count, and inventory restriction movements in SAP as needed
  • Research and settle SAP and Shop Floor production reporting errors
  • Develop plant bonus measures annually and track performance to target
  • Development of plant labor and machine standards, scrap/rework rates, and conversion factors
  • Participate on plant committees (boardwalk, loss control, lean implementation team) and kaizen/improvement events
  • Misc. duties (tax exemption certificates, check requests, cost analysis, etc.)
102

Industrial Engineer Resume Examples & Samples

  • Identify opportunities and develop alternatives to resolve, correct, and improve operational problems and bottlenecks
  • Utilize efficiency analysis data, and reports information to operations and support areas, and work with area Supervisors to improve efficiencies and normalize standards
  • Perform project activity and assignments in the application of industrial engineering techniques and procedures with little supervision
  • Conduct and apply industrial engineering practices in non-manufacturing areas under general direction
  • Assist in maintaining production standards and routing for machine and labor operations on the SAP system for the production unit
  • Generate manufacturing, filling, and packaging process flows, including alternate flows for all products
  • Support the Data Analyst and Data Reporter roles per the Asset Utilization concept
  • Drive Operational Excellence performance by providing feedback and analysis to Manufacturing and Packaging on Key Performance Indicators
103

Principal Industrial Engineer Resume Examples & Samples

  • Bachelors degree in Industrial Engineering, Operations Research, or a related discipline
  • Masters degree in Industrial Engineering or MBA strongly preferred
  • 7+ years preferred prior work experience in Industrial Engineer with complex operational analysis and/or labor planning
  • 5+ years’ experience in labor standards-based models, labor productivity analysis
  • 5+ years experience in LEAN / Six Sigma / 5S practices, methodologies and tools
  • Prior experience in problem solving, data analytics, root cause analysis and solution implementation
  • Prior experience in being able to influence and lead Operational Management and large project teams
  • Prior project and Program Management experience a plus
  • Prior analytical background, including statistics and forecasting principles
  • Prior experience and high level of proficiency with MS Access, MS Excel and MS PowerPoint
  • Prior experience working in a fast paced environment and under time constraints
  • For new hires, must meet all FedEx Office employment qualifications in force at time of hiring
  • For current FedEx Office team members, must meet hiring criteria for the position and transfer requirements as outlined in the Team Member Handbook
  • Ability to travel as required in order to meet with customers, vendors, other team members, and/or other business necessities
  • Ability, on a consistent basis, to maintain attention and concentration for extended periods of time
  • Ability, on a consistent basis, to sit, stand, and/or walk for extended periods of time
  • Ability, on a consistent basis to read and interpret documents, computer monitors, and written/verbal instructions from customers, vendors, and other team members
  • Ability, on a consistent basis, to communicate effectively with customers, vendors, and other team members
  • Ability, on a consistent basis, to perform work activities requiring cooperation, instruction, and persuasion
  • Ability, on a consistent basis, to function in a fast-paced environment, under substantial time pressure
  • Ability to perform the General Duties and Responsibilities set forth above in a consistent and efficient manner
  • Ability, on a consistent basis, to report regularly to work and maintain established business hours in order to support the FedEx Office business; regular attendance and/or reporting could include regular attendance at a physical location and/or maintaining established business hours depending on the scope and nature of the position
104

Industrial Engineer Resume Examples & Samples

  • Work with local leadership team and cross functional partners to evaluate major opportunities for process improvement through new or enhanced systems, tools, and methodologies
  • Familiarity with researching data from various business systems (WMS, Labor Management, Slotting software, Kronos, etc.) and translating into meaningful findings in support of firm action plans
  • Analyze existing policies, procedures, and methods to ensure that methods are accurate and meet business objectives
  • Publish results and recommendations arising from updates and analysis
  • Strong math, analytical, and problem solving skills.Experience developing engineered standards using MTM (ie: M.O.S.T.) in a warehouse/distribution environment and familiarity with labor management systems such as Manhattan, Red Prairie, or other
  • Familiar with slotting and profiling techniques
  • Familiar with economic evaluation and justification
  • Ability to operate PC applications including: Microsoft Office (Excel, Access, Word), CAD, simulation, and communication tools
  • Advanced programming and data analysis tools
  • Required to make key process decisions based on knowledge and evaluation
  • Required to make recommendations critical to supporting company goals and objectives
105

Internship Industrial Engineer Resume Examples & Samples

  • Assist with administrative or technical tasks, depending on functional area
  • Assist with special projects
  • This position requires the successful candidate to be a student currently enrolled in classes leading to a degree in Industrial Engineering, in an ABET certified program
  • Candidate must be a Junior (in the IE program) to Senior or Graduate level candidate with a minimum 3.0 GPA
106

Industrial Engineer Resume Examples & Samples

  • Develop high level program plans including schedules and resource allocation including
  • Work Breakdown Structure (WBS) tables
  • Organizational Breakdown Structure (OBS) tables
  • Resource & Direct Rate Tables
  • Control Account, Work Package & Planning Package Structures
  • Integrate with IMS activity and resource data
  • Integrate with actuals (using CostPoint 6.1)
  • Produce project performance reports including standard EVMS metrics and variance analysis
  • Follow a Baseline Change Process and maintain the associated budget logs
  • Coordinate with team members to ensure the schedule reflects the current program status
  • Analyze "look ahead" schedules for potential problems or delays
  • Manage interfaces of data between MS Project files and the COBRA system
  • Product process engineering, to include manufacturing process flow development, testing strategies, etc
  • Industrial Engineer New Grad - 3 years of experience in planning, preparing, issuing and controlling EVMS project schedules and providing coordination for data input requirements
  • Proficient in Microsoft Office Suite (MOS) software applications including MS Word, MS Excel, and MS PowerPoint
  • Ability to learn and master software tools such as Microsoft Project and Deltek COBRA (training will be provided)
  • Excellent people skills to include collaborating in a multi-disciplinary, diverse, and dynamic team environment
  • Experience working in an engineering development atmosphere
  • Experience supporting product development and manufacturing lifecycles
  • Experience in applying and reporting Critical Path Method (CPM) Scheduling
  • Experience working in a Department of Defense (DoD) environment
  • Existing DoD clearance preferred
107

Industrial Engineer Resume Examples & Samples

  • Performing capacity audits to validate equipment capabilities
  • Identify potential improvements in manufacturing floor layout
  • Analyze data input accuracy to ensure proper metric reporting
  • Study the capacity model and business processes to help identify improvement opportunities
  • The ability to be self motivated and work independently
  • A good understanding of manufacturing processes and line optimization
108

Industrial Engineer Resume Examples & Samples

  • Prepare, update working instruction and technical documents
  • Process drawings printing, distribution and update
  • Relative BOM preparation and update
  • Tooling preparation, include drawing preparation, communicate with supplier, maintenance support, fixed assets requisition
  • Raise requisition for auxiliary material needed for manufacturing
  • Analyze the cause and give solutions for any problems occurred from manufacturing site;Assist the relevant Dept. to handle problems; Make decision for Non-conformity parts from manufacturing process, and deliver solutions
  • Selection and set up for process parameters of some equipment. (Oil press, balance machine and test bench program)
  • Responsible for contious inmprovement work in the factory,including production process optimization, tooling improvement, etc
  • More than 5 years experience in Manufacturing company, well known motor manufacturing is preferred
  • Familiar with CAD,CAXA and other drawing related sofeware
  • Good English skill in communication and writing
109

Industrial Engineer Resume Examples & Samples

  • Develops and maintains an accurate and effective Work Measurement System. Ensures effective productivity measurements are established for identified functions in the distribution center through time studies and frequency studies conducted in the distribution center
  • Evaluates and subsequent revises all work methods and workflow for all functions to ensure they are ergonomically correct
  • Trains management and hourly workforce on productivity and work methods
  • Establishes and maintains “Best Methods” for all job functions
  • Analyzes, recommends, and implements enhancements to existing work methods flows and processes to increase throughput
  • Develops and designs distribution center and office area layouts
  • Collects data to assist in the development of distribution center and capital budgets
  • Analyzes and provides cost justification on all capital project requests
  • Designs, selects and installs material handling equipment incorporated into existing, new and expanded distribution centers
  • Researches technological advances in material handling systems to develop cost-effective improvements to operating methods and procedures to support purchase recommendations
  • Works effectively with external resources (consultants and contractors) to ensure collaborative partnerships to meet business requirements
  • Management Observation Program
  • Standard Data and Predetermined Time System
  • Distribution Center Operations in a National Logistics Network
  • Working with Individual Incentive programs
  • Areas of Statistical Analysis, Operations Research and Line Balancing
  • Distribution Center Material Handling Systems
  • Cost Analysis for Project Justification
  • AutoCAD and Database skills
110

Industrial Engineer Resume Examples & Samples

  • Experience Developing Production plans
  • Experience with Forecasting Methods (Learning Curves, Parametric Estimates)
  • Experience with Database Operations (Data Mining, SQL Statements)
  • Must be a US Citizen or able to work in the U.S.. This position is located at a facility that requires special access
111

Industrial Engineer Resume Examples & Samples

  • Develop and maintain manufacturing instructions for all products
  • Define and Design tooling, fixtures and programs used in the manufacturing process
  • Analyze and evaluate manufacturing methods and standards
  • Lead teams to find solutions to problems that affect operator safety, quality, productivity, and cost
  • Conduct direct labor studies using acceptable engineering practices and establishes standards on operations, set up, and work station layout
  • Identifies areas of unnecessary cost. Researches methods and procedures for cost reduction, work cell development and material flow improvement
  • Develop and implement new processes or change current processes
  • Develops capital equipment studies and makes appropriate recommendations for capital expenditures
  • Lead cell line design activities and support Kaizen Events
  • Excellent presentation, written and verbal communication skills
  • Strong analytical and problem solving skills, knowledge in Statistical Process Control, Six Sigma and Lean Manufacturing
  • Oriented and experienced in a team environment
112

Industrial Engineer Resume Examples & Samples

  • Justify capital and revenue expenditure in line with project requirements and company expectations
  • Ensure all project budgets are maintained and achieved within set limits
  • Play a leading role in implementation of project tasks retaining ownership for all actions
  • On a daily basis liaise with suppliers ensuring that they meet agreed targets
  • Develop a clear improvement plan for manufacturing and assembly areas through lean methodology; lead and facilitate the execution of the plan
  • Manage process and product changes to implementation following the NPI process
  • Manage projects on a daily basis ensuring all targets are met
  • Support new business opportunities in the development of value stream mapping, manufacturing build process, and risk assessments (PFMEAs)
  • Coach and facilitate cross-functional teams ensuring all parties have an understanding of project requirements
  • Apprentice trained with HND / HNC or equivalent, Engineering related degree is desirable
  • Solid experience within a technical function being able to demonstrate a track record of introducing new processes from concept to completion in a varied engineering business (Manufacturing Engineering, Production Engineering, Process Improvement)
  • A Knowledge of Lean methods (e.g. Kaizen, SMED, 5S) and engineering practices in Manufacturing and Assembly environments for the wider business
  • Good understanding of business processes in a fast moving environment
  • Very good communication and stakeholder management skills, ability to influence others
113

Industrial Engineer Summer Intern Resume Examples & Samples

  • Figure out how to manufacture, handle, and store parts or products, or deliver services, with maximum efficiency
  • Enact quality control procedures to resolve production problems or minimize costs
  • LI-WL1
114

Industrial Engineer Resume Examples & Samples

  • Develops performance standards using classic IE Methods to provide useful production measures
  • Assists in supervising the preventive, predictive and repair activities of the maintenance department
  • Develops, evaluates and improves manufacturing methods
  • Analyzes and plans work force utilization, space requirements and workflow and designs layout of equipment and workspace for maximum efficiency
  • Confers with planning and design staff concerning product design and tooling to ensure efficient production methods
  • Estimates production time, staffing requirements and related costs to provide information for management decisions
  • Confers with management, engineering and other staff regarding manufacturing capabilities and other considerations to facilitate production processes
  • Documents Job Methods for production
  • Experienced in computer applications such as AutoCAD and Microsoft Office products
  • Excellent organizational skills required for planning, implementing and follow up on assignments to assure proper completion of assignments on schedule
  • Prior supervisory work experience in an ISO 9000, union manufacturing environment preferred. Knowledge of Facilities Management including environmental compliance exposure and OSHA standards desirable
  • Experience with specialized manufacturing computer planning system (MCS) desirable
115

Industrial Engineer Resume Examples & Samples

  • Significant Experience in Industrial Engineering and Manufacturing Resource Planning methods and processes
  • Knowledge of Lean Manufacturing & Six Sigma techniques
  • Knowledge of manufacturing tools and systems
  • Experience engaging and leading cross functional teams including technicians, manufacturing engineers, PMP, quality, production leads, supply chain process owners, and program engineering
  • Knowledge of MS Project and SAP
  • The candidate must have demonstrated written and verbal skills to effectively communicate with managers, directors, employees and customers to maintain a viable working relationships
  • Proficient in MS word, Excel and PowerPoint computer skills
  • Experience with Space Shuttle External Tank and Large Aerospace Structure manufacturing processes, requirements, and process flows
  • Green Belt Certification/Certified Account Manager
  • Experience leading and participating in LM21 process improvement events
116

Industrial Engineer Resume Examples & Samples

  • Design, Specification, Acquisition, Installation and commissioning of a new equipment
  • Design process of new product
  • Continuous improvement assembly process to achieve factory KPI
  • Play individual role in the project and drive the industrialization process
  • Manage multiple projects.Work within budget guidelines
  • Bachelor’s Degree or higher in Mechatronic or Electrical Engineering
  • Minimum 3 years experiences in household appliance or similar manufacturing industry
  • Good Project Management skills and experiences
  • Good knowledge of domestic appliance,particularly refrigerators
  • Knowledge of manufacturing process: factory layout, assembly line, testing, preferably in the home appliance industry
  • Auto CAD, MS project & MS Office tools
  • Open communicator, Good written and verbal communication skill in English
117

Lead Industrial Engineer Resume Examples & Samples

  • Analyze information and evaluate results to recommend best solutions based on data
  • Work with factory simulations to understand process bottlenecks and explore alternate layout strategies
  • ,Provide cross-functional guidance and expertise and train and develop manufacturing engineers and operation teams with the Industrial Engineering expertise
  • Manufacturing experience in process flow and capacity management
  • Demonstrated leadership with the ability to work in a fast pace environment
  • Demonstrated follow-through and project management skills
118

Industrial Engineer, Global Resume Examples & Samples

  • Improve the quality of labour productivity data through proven techniques and new technologies
  • Facilitate a process of best practice sharing internally within the plant as well as externally with peers and other facilities
  • You have a degree in Industrial, Mechanical, or Aerospace Engineering
  • You have minimum of 5 - 10 years applicable experience in a manufacturing environment, preferably in the aerospace industry
  • You have knowledge and experience in using sound Industrial Engineering principles as they relate to work study, process analysis and resource planning
  • You have proven ability to lead and manage projects involving cross functional teams
  • You have knowledge and experience of applying lean manufacturing techniques
  • You have strong written and communication skills
  • You have advanced knowledge of Microsoft Word, Excel, Access and SAP
119

Industrial Engineer Resume Examples & Samples

  • Develop strategic and tactical capacity models
  • Cell Design experience required
  • Line Balancing experience required
  • Experience developing visual standard work preferred
  • AutoCAD/ the ability to quickly learn new computer systems
  • Demonstrated ability with ‘Kaizen’ events, idea simulation and execution
  • Experience with lean tools and success leading Continuous Improvement activities
  • An inspiring and influential Change Agent, comfortable driving change
  • Effective at working with stakeholders at all organization levels
  • Excellent communication skills and the ability to convey complex ideas simply
  • Ability to prioritize and manage multiple priorities gracefully under pressure
  • Enthusiastic attitude
120

Industrial Engineer Resume Examples & Samples

  • Analyze data to make recommendations that drive decisions for projects or processes
  • Applies advanced industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle resulting in a robust product design and work statement that meets program requirements
  • Communicate with all stakeholders to ensure Manufacturing products and services meet contractual and schedule requirements
  • Conduct studies or other work packages within and/or across programs, organizations or manufacturing business units
  • Coordinates with affected organizations to implement the manufacturing plan
  • Identifies long lead parts and activities, special tooling and technology changes required to successfully meet contractual requirements
  • Lead and direct projects including project feasibility, constraints, processes, schedule, cost, and risks
  • Lead strategic initiative projects enabling the ability of the organization to achieve specific goals, and objectives
  • Prioritizes, delegates and tracks performance and documentation of analyses of mechanisms, components and systems selecting appropriate methods to validate or assess the design and maintenance approach
  • Provides analysis of production rates and production development initiatives
  • Researches, designs, develops, improves and implements processes to enhance schedule performance, lower cost and improve quality through the application of advanced Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization
  • Support activities involving product development, process improvement, or program initiatives
  • Support proposal preparation and new business development efforts
  • Trains, coaches and mentors others
  • Utilize Industrial Engineering (IE) and project management skills and principles to develop plans
  • Effective writing and communication skills to communicate with technical personnel from multiple skill areas and functions to evaluate technical information and issues impacting design, production, and support of products, services, or other deliverables
  • Experience creating project schedules to identify time frames for key project milestones, direct and manage more complex project schedules, independently identify project resource requirements, collaborate with others on more complex projects assigned, and assist others in complex large scale projects
  • Experience in process management, performance metrics development, root cause analysis, project management, lean manufacturing, business case analysis, resource forecasting, developing schedules, developing business plans, manufacturing operations support
  • Experience in all aspects of statistical analysis concepts such as normal distribution, standard deviations, mean, probability, and confidence levels
  • Experience leading and directing the activities and resources of assigned projects and support higher graded employees in large scale and complex projects
  • Thorough knowledge in Industrial Engineering process improvement strategies and Lean techniques (e.g., methods analysis, work combination charts, and ergonomics,) to analyze and improve operations
  • Must be able to determine processes used to accomplish goals, properly document processes, support personnel and activities i.e. understand how to separate and combine tasks into efficient work flow, identify opportunities for synergy and integration, and simplify complex processes
  • Proficient using Microsoft Office Products (Word, Project, PowerPoint, Excel)
  • Degree and typical experience in engineering classification: Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience
  • Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry
  • ABET is the preferred, although not required, accreditation standard
  • Experience using Boeing systems such as DM2000
  • Experience working with Boeing design, production, and build processes to effectively influence product design
  • Experience in an Industrial Engineering role
  • Experience managing or leading a team in an operations discipline such as industrial engineering, tooling operations or other cross functional teams
  • Working knowledge of responsibilities and tasks performed by various Operations department/disciplines (e.g., Fabrication, Assembly, Tooling, Quality, and Industrial Engineering)
  • Experience developing and delivering presentations (e.g., posture, speaker's relationship to audience, use of intonation and props, use of visual aids and pacing) to senior leaders
  • Experience developing and maintaining integrated, resource-loaded project schedules including use of project management tools and software (Milestones, Primavera)
  • Experience using process improvement tools such as Lean improvement techniques, Six Sigma techniques, Accelerated Improvement Workshop (AIW) , 3P (Production Preparation Process) to analyze and improve operations
121

Ops Industrial Engineer Resume Examples & Samples

  • Manage the design and launch of new sites and capacity upgrades to existing facilities
  • Plan and design systems that increase critical-to-quality (CTQ) business needs by improving integration of people, materials, equipment, software, and finance
  • Recommend and implement changes to safety procedures, work methods, and labor standards
  • Project management from conception to completion
  • Set clear goals and lead a team to achieve those goals
  • Conduct and lead project meetings with Sr. Management
  • Assessing and optimizing the processes and equipment used in the facility
  • Typical projects could include spearheading a redesign effort for a particular operational process path, designing a "scrappy" solution for a short term need, or conducting a capacity planning and analysis study
  • A completed Bachelor's degree in Industrial or Manufacturing Engineering from an accredited university
  • 7+ years of Project Management/Engineering experience
  • Experience managing large capital projects
  • Microsoft Office products (Excel, PowerPoint, Word, Visio, and MS Project)
  • 50+% travel may be required
  • Demonstrated use of analytical skills to solve engineering problems
  • Ability to work with all levels of Associates and Mangers
  • Exposure to Six Sigma, Lean manufacturing efforts, transportation/logistics and/or fulfillment/distribution centers is preferred
  • Experience with AutoCAD and SQL
122

Industrial Engineer Resume Examples & Samples

  • Maintains the quality system in area of responsibility in regard to procedures, documentation, corrective action, and deviation reporting
  • Coordinates with QC and Engineering to solve day to day problems with the product and process
  • Performs process capability studies as required using Quality Analyst Software to ensure process capability
  • Performs validations as require in order supporting the requirements of the validation program
  • Understands environmental and health and safety policies, procedures and objectives. Ensures staffs are trained regarding environmental and health and safety work instructions and policies. Monitors staff to ensure compliance
  • To ensure that staff in the department are trained according to relevant work instructions
  • Raise issues within production so that, in conjunction with production manager, remedial actions can be implemented to minims impact
  • Being able to work under pressure and being able to take challenges
  • Act as deputy to the Production Manager
  • BS degree in science
  • Able to communicate effectively in English and Chinese
  • ISO 9001 experience
  • Experience in using statistical process control techniques desired
  • Prior quality experience desired
123

Industrial Engineer Resume Examples & Samples

  • Ability to organize many details into a broad view of the total organization
  • Ability to work effectively with other engineers, technicians, operators and management
  • Master degree in Industrial Engineering or Business Management
  • Strong analytical, creative thinking and project management skills
  • Strong time management skills, ability to multi-task and adaptable to changing priorities
  • Working knowledge of product manufacturing / process technologies
124

Industrial Engineer Resume Examples & Samples

  • Assist with analyzing feasibility according to optimal methods by assessing the costs, impacts and risks of a change in production
  • Learn to analyze and estimate PCR (Program Change Request)
  • Assist with analyzing equipment and workstation production capacity
  • Conduct process analysis and modeling using work streams, simulation, critical path, network diagrams, feasibility studies, and line balancing
  • Prepare plan and schedule for client group, through the establishment of standard work and critical path identification
  • Perform line capacity and rate analysis studies
  • You must have a good analytical mind and be comfortable reading engineering drawings
  • You have previous experience as a Methods Agent in the Aerospace Industry is Mandatory
  • You have worked with mufti-disciplinary teams and will be required to work with Bombardier Suppliers' Final line
125

Industrial Engineer Resume Examples & Samples

  • Responsible for manufacturing process development, implementation, and continuous improvement to improve safety, enhance Quality/ Yield, reduce Cost, and improve Productivity/Schedule. Initiate and lead lean manufacturing process improvement projects
  • Establish and maintain labor standards, lead times and capacities/capabilities for manufacturing and ancillary processes
  • Establish and maintain work instructions and other documentation associated with manufacturing and ancillary processes
  • Collaborate with Design Engineering during prototype, development and first article manufacturing
  • Support and collaborate with shop floor technicians to solve manufacturing problems
  • Experience with Engineering change processes, from requests through implementation
  • Experience with Drawings and engineering/manufacturing bill of materials
  • Experience with Lean/Six Sigma Manufacturing methodologies for waste reduction and their application in a manufacturing environment
  • Proficiency with Microsoft Office Word, Excel, Outlook and PowerPoint
  • Knowledge of ERP systems (SAP desirable)
  • Basic CAD design experience (floor layout and small tooling preferred)
  • Materials management (warehousing, transportation, logistics) experience desirable
  • Experience leading cross functional teams through problem solving and project execution
  • Expertise in complex assembly methods and processes (aerospace and composites a plus)
  • Experience in project management and knowledge of Project Management Body of Knowledge a plus
  • Must have a thorough understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties. Must possess the ability to develop and communicate new concepts; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems
126

Industrial Engineer Resume Examples & Samples

  • Bachelor degree in industrial engineering or related
  • Knowledge of Automotive product/process is preferred
  • Fluent English skill is required
  • Good communication & presentation skill is required
  • Excellent computer skills – Microsoft Excel, Power Point, CAD
127

Industrial Engineer Resume Examples & Samples

  • Manages and develops the Huma, technological, logistical and material resources of a production system with an emphasis on efficiency, productivity, and quality
  • Focuses on problem solving, whether it’s preparing for growth, performing cost analyses. Establishes workplace safety procedures, supply chain management, or modification to the assembly line
  • Reviews production schedules, engineering specifications, process flows, and other information to understand methods and activities in manufacturing and services
  • Figure out how to manufacture parts or products, or deliver services, with maximum efficiency. Develops management control systems to make financial planning and cost analysis more efficient
  • Enacts quality control procedures to resolve production problems or minimize costs
  • Works with customers and management to develop standards for design and production
  • Designs control systems to coordinate activities and production planning to ensure that products meet quality standards
  • Confers with clients about product specifications, vendors about purchases, management personnel about manufacturing capabilities, and staff about the status of projects
  • Bachelor’s degree holder in Industrial Engineering
  • More than 5 years of increasingly responsible experience performing similar task and responsibilities
  • Skills
128

Industrial Engineer Resume Examples & Samples

  • Knowledge gained through academic course work in capacity planning, simulation and optimization modeling techniques
  • Knowledge gained through academic course work or experience in Lean Manufacturing concepts
  • Knowledge gained through academic course work or experience in managing process cycle times
  • Knowledge gained through academic course work or experience in work scheduling methodology
  • Knowledge gained through academic course work or experience in inventory management
  • Strong understanding of statistics applied to data analysis
  • Knowledge of Microsoft DBMS
  • Ability to write Scripts in Windows Environment
  • University coursework in Statistics
129

Industrial Engineer / Black Belt Resume Examples & Samples

  • Responsible for implementing and maintaining continuous improvement throughout the Plant
  • Monitoring and reporting metrics for plant production area
  • Developing and maintaining process modeling for production line areas
  • Actively supporting the site Operations Excellence effort
  • Observing, analyzing data, and supporting operations leading to business process improvement recommendations and implementation
  • Facilitating the generation of project charters and coaching Lean Six Sigma Green Belts
  • Solving problems that have a variety of complex features
  • Coordination of CIP Project support for those projects which affect material loss, efficiencies and quality improvements
  • Managing the employee idea program
  • Project Management and Governance of site projects
  • Other plant support as assigned
  • Knowledge of applicable regulatory standards and requirements for infant formula and nutritionals
  • Knowledge of applicable regulatory standards and requirements for manufacturing environments
  • High degree of technical expertise and familiarity of manufacturing processes
  • Must possess good communication, leadership, problem solving, interpersonal and teamwork skills
130

Industrial Engineer Resume Examples & Samples

  • Review production schedules, engineering specifications, process flows, and other information to understand methods and activities in manufacturing, distribution and other services
  • Develop capacity models for equipment and labor loading
  • Figure out how to manufacture parts or products, or deliver services, with maximum efficiency
  • Develop measurement systems and work standards for transactional, manufacturing, and logistics processes
  • Minimum of 1 year experience with lean tools (5S, standard work, SMED, etc.)
  • Experience with GMP, transactional processes, and distribution processes
  • Must possess and demonstrate strong motivational and indirect leadership qualities
  • Possess and demonstrate excellent oral and written communication skills
  • Possess excellent proactive problem-solving and analytical skills
  • Well organized, detail-oriented, possess ability to multi-task
  • Self-motivated, disciplined, focused, work well under pressure and be able to prioritize work
  • Must be dependable and show initiative to improve the overall throughput and financial goals of the organization
  • Advanced computer skills – including, but not limited to, Microsoft Office suite, discrete event simulation software
131

Industrial Engineer Resume Examples & Samples

  • 1-2 yrs operational experience including project management experience preferred; manufacturing or distribution environment (internships OK)
  • 4-year degree in Industrial Engineering
  • Advanced level Excel and data analysis skills; Word, PowerPoint, Outlook
  • Superior organizational, analytical, problem solving, and project management skills
  • Excellent oral and written communication skills; strong collaboration
  • Access proficiency preferred
  • Minitab proficiency preferred
  • Labor Management software experience preferred
  • Six Sigma Green Belt certification preferred
  • Experience in the implementation of Engineered Standards is preferred
  • Working knowledge of computer systems and applications, government regulations applicable to pharmaceutical industry (OSHA, DOT, FDA, DEA, etc), systems/computer logistical applications in distribution environment
  • Knowledge of drug inventory management, basic HR practices, and computer room operations
132

Industrial Engineer Resume Examples & Samples

  • Bachelor of Science degree in Industrial Engineering plus 2 years of professional experience, or a Master's Degree in Industrial Engineering plus 0 years of experience
  • Ability to prioritize multiple tasks in a fast paced, highly technical work environment
  • Master of Science in Industrial Engineering
  • Experience performing transactions within an integrated ERP system
  • Experience with test equipment manufacturing
  • Proficient in MS Access
  • Proficient in a CAD drawing software for facility layouts
133

Industrial Engineer Resume Examples & Samples

  • Level 4: Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard
  • Level 4 candidate will have experience in 8 or more of the following: Process Modeling, Manufacturing Operations Support, Project Management, Lean Manufacturing, Statistical/Trend Analysis, Six Sigma, Capacity Planning, Production/Mfg System Design, Work Methods Analysis/Time Standards, Planning/Constraint Based Scheduling, Ergonomics & Human Factors, Facilities Layout Design, Root Cause Analysis, Inventory Control, Value Stream Analysis
  • Preferred candidate must be able to interact with employees to gather data for process improvements. This may include observing and documenting processes, and collecting data in manufacturing areas or in aircraft during various production phases. This requires the ability to walk, stand, and enter into aircraft via steps or ladders as needed. Also, candidate may be in proximity to chemicals when observing/gathering data in an area in the factory where chemicals are in use
  • Preferred candidate must have Aurora / Constraints Based Scheduling Experience
  • Lean Manufacturing / Affordability Experience Desired
  • MS Office Suite experience required with MS Access Database Knowledge & Visual Basic Skills Desired
134

Industrial Engineer Resume Examples & Samples

  • Bachelor's degree in Industrial Engineering or Industrial Technology
  • Microsoft Office experience
  • Ability to work any shift, overtime and some travel may be required occasionally
  • Knowledge of time study/standards, ratings, MODAPTS, ergonomic evaluations
  • Knowledge of Chrysler Automated Manufacturing Planning System (AMPS) knowledge preferred
135

Industrial Engineer Resume Examples & Samples

  • 3+ years of Industrial Engineering experience in manufacturing
  • Demonstrate knowledge of MODAPTS standards and methods or an equivalent time study process
  • Able to interface with all levels of the organization from labor to management
  • Self-motivate and results-oriented and capable of working in a team setting
  • Display good analytical, written and verbal communication skills
  • Proficient in MS office applications
  • MTM-UAS certification
  • Knowledge in supporting TCF, Body and Paint Shop centers
  • Experience with World Class Manufacturing within a union environment
136

Industrial Engineer Summer Vacation Replacement Resume Examples & Samples

  • Bachelor's degree in Industrial Engineering or currently pursuing a Bachelor's degree in Industrial Engineering
  • Strong interest in the automotive industry
  • 5 or higher GPA
  • Previous manufacturing experience
  • Demonstrated ability to coach/mentor/develop team members
  • Strong background in LEAN manufacturing systems
137

Industrial Engineer Resume Examples & Samples

  • Support plans to manage yield process time difference and change set up
  • Lead standard work and 3P events with the lean transformation
  • 2 - 4+ years Industrial Engineering Experience
138

Industrial Engineer Resume Examples & Samples

  • Ability to coordinate multiple projects simultaneously and set priorities to meet deadlines on schedule and within forecasted budget
  • Analyze, develop and coordinate "as-is/to-be" business processes to determine the most efficient and reliable means of increasing productivity, quality and throughput. Applies statistical methods and performs mathematical calculations to determine process, staff requirements, and production standards
  • Assist production by providing metrics for day-to-day visibility including hours per piece, hours per program, hours per work cell, etc. Interact and coordinate effectively with all levels of functional groups within the company
  • Perform capacity planning, as needed. Understand MRP and related business systems concepts and be able to pull relevant reports
  • Perform capital equipment justification and process capital equipment requests (CER). Perform make-buy analysis and present to management
  • Use and maintain knowledge of various forms and tools to support continuous improvements efforts such as observation sheets, spaghetti charts, standard work combination sheets, Kaizen newspaper and target progress reports
  • 5+ years of operations/manufacturing related work experience, preferably high volume
  • Learn LEAN, Six Sigma, Methodology, implementation and use
  • AutoCAD / SolidWorks experience a plus
139

Manager, Industrial Engineer Resume Examples & Samples

  • Consult with Resort leadership to identify and improve business processes through operational planning support, capacity/demand analysis and productivity/process improvement
  • Ability to travel up to 30% of the time
  • 3-5 years of applied experience
  • Demonstrated knowledge and experience with HotSOS and Inventory Smart computer systems
  • Demonstrated knowledge and experience in the timeshare industry
140

Industrial Engineer Resume Examples & Samples

  • Receives work direction from Distribution Center management staff and Engineering Department
  • Sets acceptable individual work standards for all functions at the Distribution Center
  • Performs other related duties as assigned by management
141

Industrial Engineer Resume Examples & Samples

  • Conduct industrial engineering distribution labor studies
  • Develop methods for tracking and reporting warehouse and transportation key performance indicators
  • Document process changes and ensure SOPs are updated
  • Maintain labor tables in WMS / LMS
  • Train operations staff on the development and implementation of labor standards at the division level
  • Analyze and develop distribution and transportation cost savings opportunities
  • Evaluate and advise distribution management on potential operational improvements
  • Conduct labor audits and time studies to validate and ensure the reasonableness and soundness of all implemented labor standards
  • Ensure standards are developed in a manner that meets the test of scrutiny from Labor Union. Interact with Union officials as necessary to support the reasonableness and soundness of developed labor standards
  • Assist with the maintenance of drop zones for transportation
  • Bachelor’s degree in Industrial Engineering or related field equivalent experience
  • MTM and/or Basic MOST certification preferred
  • Six Sigma Black / Green Belt preferred
  • 3+ years experience in Industrial Engineering
  • 3+ years experience in distribution operations
  • In depth knowledge of Warehousing and Transportation Operations
  • Experience dealing with collective bargaining units
142

Industrial Engineer Resume Examples & Samples

  • Performing time and motion studies to optimize site processes
  • Providing technical assistance for product introductions including manufacturing process readiness, equipment utilization and manpower planning
  • Driving continuous improvement projects with a special emphasis on production certification, product quality, material flow, lean and Six Sigma methodologies
  • Performing as an integrated team leader with engineering, customer service support, and operations to investigate and correct various production issues related to customer demand
  • BS Degree in a related engineering discipline, preferably Industrial Engineering
  • Minimum of 10+ years of direct industrial and manufacturing engineering experience working with optimization tools and processes (forge, heat treat, machining, and/or dimensional inspection), production, capacity, scheduling determination and ability to interpret blueprints and drawings and quality / process improvements
  • Requires US Citizenship due to classified nature of work
  • Ability to understand and interpret engineering technical data to provide associated guidance to cross-functional teams
143

Industrial Engineer Resume Examples & Samples

  • Develop and maintain Engineered Standards for all production departments
  • Work with operations management and HR to roll-out the labor management program
  • Understand operational processes and work with the Sr. Industrial Engineer to recommend process improvements
  • Analyze operational data to suggest and implement optimal operational flows through warehouse
  • Support operations users of WMS and WCS systems
  • Work with operations management to improve performance of staff
  • Evaluate and update performance standards as improvements are implemented
  • Identify issues, document defects and escalate problems to appropriate departments
  • Work with IT WMS Business Analyst to design and implement process improvements that require system configuration or modifications
  • Work with IT resources to test and certify performance of WMS, WCS or other systems
  • Provides Management with updates to KPIs
  • Evaluate changes to operational processes in partnership with the Management team and implement change to achieve optimum performance
  • Bachelor’s degree or higher in Industrial Engineering
  • Internship/Co-op to 2 years of Engineering experience in Supply Chain
  • Ability to think strategically as well as tactically
  • Possess a willingness to create and lead the implementation of news ideas
  • Highly motivated with a sense of entrepreneurial spirit
  • Flexible to meet our ever changing environment
  • Able to compile data from a variety of sources, analyze and recommend appropriate courses of action to take
  • Good interpersonal skills and ability to build cross functional relationship with the ability to interact effectively with all levels of management
  • An interest in understanding automation through the entire fulfillment process, process flows, inventories, variances and counting techniques
  • Prior experience or coursework in designing and developing operational processes, warehouse flow and labor management
  • Strong verbal and written communication skills with good organization and time management skills
  • Solid computer skills; strong math and analytical skills
144

Industrial Engineer Internship Resume Examples & Samples

  • Be a junior or senior in a Bachelor program, or a Spring 2017 graduate
  • Arrange the internship with the educational institution on a for-credit basis, if necessary
  • Schedule according to the following business hours: Summer internship hours are Monday-Friday (40 hours/week). Internships begin on June 5, 2017 and end August 18, 2017. Any exceptions will be reviewed on a case-by-case basis
145

Industrial Engineer Resume Examples & Samples

  • A minimum of 5 years of experience is required
  • A Bachelor of Sciences Degree is required in Industrial/Mechanical or Packaging Engineering, or equivalent experience
  • Demonstrated ability to deliver complex technical projects
  • Knowledge of MS Office Suite of software a must
  • Knowledge of Microsoft Project and Agile PDM is a plus
146

Industrial Engineer Resume Examples & Samples

  • Bachelor's degree in Industrial Engineering, Logistics, Supply Chain Management or related field
  • Minimum of 2-4 year of experience in performance measurement analysis, distribution systems and material handling equipment
  • Ability to execute against multiple priorities simultaneously successfully
  • Knowledge of all applicable OSHA and state regulations related to equipment installation
  • Thorough and complete knowledge of time and motion techniques
  • Ability to review analytical data and determine best course of action for all areas within current scope
  • Statistical processes experience
  • Ability to facilitate meetings of all levels in a professional manner
  • Effective communication & influence skills, Strong written and verbal communications skills
  • Solid computer skills, including Microsoft Word and Excel
  • Ability to use technology for presentations and training purposes
  • Experience with WMS, Labor Management (Manhattan), PowerPoint, Access, AutoCAD or simulation software and development with engineering labor standards experience is preferred
  • People development, management, development of VBA code experience is a plus
147

Area Industrial Engineer Resume Examples & Samples

  • Maintain accurate capacity planning model of assigned Fab area
  • Use statistical analysis to maintain and audit manufacturing capacity information
  • Work with management to develop applications to continuously improve production metrics
  • Interface with research & development and process engineering to plan for future product introduction
  • Evaluate scenarios representing changes in MOR/TOR, perform what if scenarios as needed, and work with Engineering and Production to understand the impact of the changes
  • Coordinate capital purchases and capacity changes with corporate planning and purchasing
  • Partner with the Area Manager and Section Manager to keep updated on area issues, priorities and projects
  • Complete all required safety training and conduct all work in a safe manner
  • Strong understanding of statistics, data analysis and problem solving
  • Intermediate to advanced understanding of area tool configurations, capabilities, and basic process and mechanical functionality
  • Advanced understanding of Manufacturing Science (scheduling, inventory management, capacity planning, etc.)
  • Excellent multi-tasking, organization and prioritization skills
  • Intermediate to advanced knowledge of database management methods and techniques
  • Proven ability to establish and maintain effective relationships with supported areas and peers and gain their trust and respect
  • Demonstrated skill at prioritizing area projects for Engineering and Production based on capacity and cycle time needs
  • Proven skill at continuously improving their area by striving to increase output of the Fab and reduce area cycle time
  • Ideal candidates will possess a good blend of programming and reporting skills (i.e. SQL, SSAS, SSRS, VBA, Python, R, Java, Tableau)
148

Industrial Engineer Resume Examples & Samples

  • Leads and manages customer readiness activities and project implementation teams in process improvement activities
  • Diagnose process improvement opportunities and develop solutions using industrial engineering fundamentals
  • Assist leadership team in establishing project strategies, developing project plans, and cost / benefit analysis to ensuring project success
  • Understand the principles of statistical quality control, innovative ways to understand business intelligence, basic project management skills, and assist with organizational change
  • Bachelor’s degree in Industrial or Systems Engineering; or Engineering / Mathematics degree with 2 years of process / industrial engineering experience; or 5 years of process / industrial engineering experience can be substituted for a degree
  • Intermediate proficiency with Microsoft Excel, MiniTab, Visio and PowerPoint
  • Six Sigma Certification, Green Belt
  • Demonstrable leadership experience
  • Experience with documenting processes, implementing process improvement projects, and creating process documentation standards
  • Experience performing time studies or work standards management
149

Intern, Industrial Engineer Resume Examples & Samples

  • Provide data analysis to support business metrics/product and production cost baselines and decision making reviews
  • Become involved in business objectives and activities to resolve production problems, maximize process reliability, reduce variation, improve productivity and minimize cost
  • Create, develop and update process routings in Solumina / SAP
  • Support capacity analyses. Provide output containing the analysis for the specified assignment with all assumptions documented
  • Perform variation analyses. Provide output containing the variation analysis for the specified assignment with all assumptions documented
  • Support lean transformation e.g. (process charts, process maps, 3P’s, etc.) including ACE/Kaizen/VSM events and continuous improvement meetings
150

Industrial Engineer Resume Examples & Samples

  • Maintain standards in MOST and validate with time studies
  • Collaborate with other industrial engineers in the department on projects and priorites
  • Maintain building layouts in AutoCAD and develop new AutoCAD layouts for projects
  • Knowledge of basic Industrial Engineering and distribution concepts
  • Undergraduate Degree AND at least 1 summer of relevant internship experience
  • Experience with time study methods (EASE, MTM, Master Standard Data, or granular time studies)
  • Experience designing and maintaining layouts and schematics in AutoCAD or SolidWorks
  • Experience preparing process/cost analysis
  • Experience working in a manufacturing or distribution environment
151

Industrial Engineer Resume Examples & Samples

  • Alignment of plant drawing with AutoCAD standards
  • Lean Flow proposals, improvements to overall facility flow, and floor space allocation responsibilities
  • Kaizen support – CI project collaboration
  • Direct Labor Time Studies / MODAPTS / line balancing
  • VA/NVA analysis and improvements
  • New program Direct Labor planning, including reviews of “IE Tool” with Advanced Manufacturing
  • Indirect Labor Time Studies / work sampling / work balancing
  • Responsible for developing and implementing process improvements and systems for manufacturing department
  • Assists manufacturing staff on new and current jobs and provides required documentation
  • Assists in troubleshooting downtime, scrap and process-related issues
  • Analyzes and assists in researching alternate or new equipment and manufacturing methods
  • Assists Manufacturing and Quality departments with process improvements for quality, productivity, and scrap reduction
  • Develops and implements systems used for all process documentation, variable control, and job set-up
  • Enforces safety rules daily, and actively intervenes to correct recognized unsafe actions and conditions
  • Bachelor of Science Degree in Mechanical Engineering, Industrial, Manufacturing, Engineering Technology or similar
  • 3+ years of automotive interiors or exteriors experience, or alternatively, 3+ years of experience in a high speed manufacturing environment
  • Industrial Engineering experience required (Manufacturing Engineering responsibilities will be trained)
  • AutoCAD experience required
  • Experience with torque tools helpful
152

Industrial Engineer Resume Examples & Samples

  • Minimum of a Bachelor of Science in Engineering - Industrial preferred
  • Minimum of 3 years of industry experience – automotive interiors experience desired
  • Working experience in a manufacturing assembly facility – JIT manufacturing experience desired
  • Lean Certification desired
  • MODapts certification desired
  • Strong computer skills required (MS Office, AutoCAD, etc.)
  • Strong Leadership and Interpersonal skills – ability to work in a matrix organization and effectively lead projects without direct positional authority is required
153

Industrial Engineer Resume Examples & Samples

  • Analyze work flow, drive waste reductions, and optimize labor work content utilization
  • Identify opportunities for improvement through process and material flow mapping
  • Facilitate value stream mapping events and projects, driving towards a future state vision
  • Create AutoCAD floor layouts, reflecting current state and providing visual aid for projects
  • Update existing/outdated drawings into AutoCAD format
  • Utilize continuous improvement techniques such as 5S, e-Kanban, Kaizen, Lean Manufacturing, OEE, Poka-Yoke, Setup Reduction / SMED, TPM, Visual Factory, etc
  • Conduct lean tool training for current employees and new hire orientation classes
  • Develop and maintain strong, working relationships at all levels to promote and sustain a continuous improvement culture
154

Industrial Engineer Resume Examples & Samples

  • US Citizenship in order to obtain and maintain a US Dept of Energy "Q" level security clearance
  • BS in Industrial Engineering
  • Ability to analyze, plan, coordinate, and implement routine through moderately complex Industrial Engineering activities involving all aspects of plant productivity improvements
155

Industrial Engineer Resume Examples & Samples

  • Ability to translate analytical findings into context that non-technical clients can understand
  • Flexibility and willingness to address client ideas and feedback
  • Responsiveness to client and project manager requests
  • Good time and project management skills
  • Excellent problem-solving, communications and presentation skills
  • Strong customer focus with the ability to work with technical teams and business users
  • Ability to work independently and as a member of a project team
  • Bachelor’s degree from an accredited college or university in in industrial engineering or operations research
  • Experience using statistical packages, such as Minitab, Systat, Alteryx, MATLAB, SAS, R, SPSS, SQL, or python
  • Proficiency in statistical analysis and data modeling as well as Microsoft Word and Excel
  • Experience with River Logic Enterprise Optimizer or analytical packages a strong plus
  • Ability to obtain and maintain certain job-related certifications if no job-related advanced degrees
  • U.S. citizenship may be required. Ability to work in the United States indefinitely required
  • Ability to work overtime required on occasion
156

Industrial Engineer Resume Examples & Samples

  • This position will participate in Value Stream Mapping (VSM) events and work as part of the project team to reach future state vision
  • Be able to map process and materials flows and identify areas for improvement
  • Will work with site leadership teams to help them effectively use KPI's, dashboards and data analysis information to manage inventory and improve lead times
  • Uses techniques, such as: Lean Manufacturing, 5S, Set up Reduction / SMED, TPM, Visual Factory, e-Kanban, OEE, Poka-Yoke, Kaizen, etc
  • Will help lead direct operational Lean initiatives and assist in training of plant employees in application of Lean tools
  • Will help drive cost and waste reductions, analyze work flow, and optimize labor force utilization
  • This position will also maintain strong working relationships at all levels to sustain a continuous improvement culture
157

Proj Mgr, Industrial Engineer Resume Examples & Samples

  • Manages on site review of system functionality and performance. Responsible for the installation of systems and equipment, testing and monitoring equipment and training employees on systems. Works with suppliers on developing schedules for installation, maintenance, etc
  • Manages development, implementation, and coordination of projects through scheduled reviews, financial analyses and design/status meetings. Executes the annual capital budget (with responsibility in the multimillion dollar range), including development of cost justifications
  • Coordinates with field management staff on project implementation and priorities. Responsible for coordinating cross divisionally to align and achieve project objectives
  • Meets with vendors as part of equipment procurement process and system design
  • Negotiates and reviews pending contracts
  • Identifies strategic opportunities / potential operational improvements for their site and potentially other sites. Reviews building and equipment design to ensure integration between different components and reduce last minute conflicts. Develops alternative solutions to eliminate conflicts and reduce costs. Capable of resolving urgent tactical needs / opportunities of the facility
  • Contributes to the facility management team through involvement in safety management action team, daily management planning meetings, maintenance scheduling, long term operational planning and staffing model
  • Develops facility designs and innovative solutions to increase efficiency and resolve operational problems
  • Bachelor’s Degree in Mechanical or Industrial Engineering and at least 2 years of experience with Manufacturing, Pharmacy or Distribution material handling systems
  • Experience with work measurement, time studies and standard work (developing of a standard work process and implementation of that process)
  • Knowledge of engineering and industry concepts and trends that will increase efficiency and resolve operational problems
  • At least 2 years logistics experience
  • Experience with distribution center productivity and quality improvement
  • Experience developing facility designs and material handing solutions
  • Experience running statistical analyses such as SPC (statistical process control)
  • Knowledge of Lean/Six Sigma processes
  • Experience negotiating with outside vendors, including negotiating contracts, prices, resolving service issues and reconciling differences
  • Experience leading cross functional teams in project development and process improvements
  • Experience with project management (for example: planning, organizing, and managing resources to bring about the successful completion of specific project goals and objectives)
158

Industrial Engineer Resume Examples & Samples

  • This new position will support both the Harrodsburg and Berea Motors facilities
  • Lead continuous improvement activities
  • Manage, champion and implement cost reduction improvements
  • Support product launches with cross-functional team
  • Perform capacity analysis on manufacturing processes and interface with customers
  • Support defect investigation and defect reduction
  • Responsible for capacity improvements, peak cycle reduction, line balance, change-over and other process improvements
159

Industrial Engineer Resume Examples & Samples

  • This includes the coordination of necessary time studies, implement and improve methology for data measurement and ensure the availablitity of the data for the production planning
  • Based on newest data, the industrial engineer will work in and initiate productivity improvment projects targeting investment, production time, layout, e.g
  • This function will work closely with the world wide IE departments in terms of metholodgy, best practice, synchronization and optimization
  • Implement and execute Industrial Engineering data model
  • Ensure IE data quality and availability
  • Take care of productivity improvement incl. projects, reporting and plan ahead
  • Build up and provide knowledge about methology (e.g. IE, productivity improvement, lean, six sigma analyse etc.)
  • Manufacturing facility experience, ideally with responsibility of analyzing and implementing process/systems in a high technology manufacturing process environment
  • Experience in process and equipment layout design and material handling analysis in manufacturing expansion project
  • Able to read CAD drawings
  • Handson experience on discrete event simulation modeling and analysis.Simul8/ARENA/other simulation commercial software
  • Good communication in English and interpersonal skills
  • Able to work independently with minor supervision
  • Linear programming/optimization experience
  • Able to edit CAD drawings
160

Industrial Engineer Resume Examples & Samples

  • Perform time studies, capacity analyses, and layout / product flow analyses
  • Establish consistent and accurate time standards
  • Participate in Launch Team Activities and Budget Projects
  • Create training programs for new employees
  • Implement special projects and facilitate Kaizen events
  • Facilitate set up and variance reduction teams
  • Write SOP's for processes as required
  • Proficiency in Microsoft Office (Excel, Access, PowerPoint, Project and Word) and knowledgeable in simulation software as well as flow line balancing software
161

Industrial Engineer Resume Examples & Samples

  • Solid ability to construct and analyze manufacturing costs by reviewing sketches, blueprints and functional information
  • Proven Project Management experience
  • Strong computer skills with experience using MS Office Products and Design Software, preferably Pro-E
  • Strong verbal and written skills are required
  • Prior engineering or manufacturing experience in a high volume production facility is an asset
  • Highly motivated and a self directed team player
162

Industrial Engineer Resume Examples & Samples

  • Required: Engineering or Business Management degree or equivalent work experience
  • Minimum of 3 years of experience in IE, GMS, program/platform manufacturing and plant manufacturing
  • Knowledge of Industrial Engineering skills and techniques
  • Good knowledge of GMS principles and experience in GMS implementation
  • Excellent interpersonal skills with ability to effectively communicate with diverse individuals and all level of
163

Industrial Engineer Resume Examples & Samples

  • Ensure the optimisation of manufacturing processes utilising Lean principles
  • Develop volume scenarios and forecasting for future variation in build process
  • Evaluate manpower requirements for complex build scenarios
  • Development and audit of standardised work processes
  • Lead continuous improvement workshops to effectively reduce waste
  • Evaluate process change plans for compliance with lean design criteria
  • Identify and Drive Productivity Improvements to reduce manufacturing costs
  • Support optimisation processes in automated and manual cells
  • Co-ordinate Value Stream mapping activities
  • Play a key role in process planning for new variant introduction, identifying lean solutions based on key performance metrics
  • Evaluation of post-change environment to confirm target outcomes are met
164

Industrial Engineer Resume Examples & Samples

  • Applies LEAN manufacturing approach, tools, and techniques to all industrial engineering activity
  • Conducts and co-ordinates studies and analysis to identify and quantify opportunities or shortfalls in value stream operational and/or direct cost financial performance
  • Collects, analyzes, and reports Key Performance Indictors at value stream, facility, and enterprise level, creating and leading KPI based action plans for performance improvement
  • Provide analysis and data on bottleneck capacity analysis for each process function for evaluation of potential capacity constraints
  • Conducts and co-ordinates studies and analysis to identify and quantify process and product quality and/or capacity constraints and opportunities to increase throughput
  • Provide analysis and data on Overall Equipment Effectiveness for each wrapping function for evaluation of performance
  • Develops proposed equipment layouts, operational designs and material flows, which impact direct cost elements, with a vision toward achieving plant long-term objectives. This function will require continuous interaction with the Technical and Operations groups to insure that operational needs are given full consideration
  • Member of value stream management teams designed to involve associates at all levels in improving operational effectiveness
  • Provide analytical support and resources to perform studies that verify the effectiveness of solutions implemented by the team
  • Evaluate and recommend information system needs for accumulating operational data and performing routine analysis. Interface with other groups to insure that operational needs are addressed on a priority basis. Assure that the results can be easily understood and communicated to line associates and management on a timely basis
  • Utilize mathematical and/or statistical modelling techniques to identify problems and develop solutions
  • Perform a key role in the team process of setting performance standards by
  • Leading labour standard development and Non Quality Cost standards review and approval process within Operations in consultation with Service & Finance
  • Personal and Functional Development
  • Stay abreast of technical state-of-the-art both within and outside Mars, Incorporated
  • Maintain and expand knowledge of computer applications broad enough in scope to facilitate utilization of current technology in achieving the primary focus of Industrial Engineering
  • Financial Awareness
  • Mapping and Planning
  • Communication and Influencing
165

Industrial Engineer Resume Examples & Samples

  • Utilizes continuous improvement techniques and Lean concepts with the intent of improving process flows, reducing operational expenses, and improving productivity
  • Analyze and challenge existing procedures in areas of responsibility throughout the facilities, making recommendations, and working with the operational management to integrate solutions
  • Develops, Implements and Improves manufacturing processes, tools, equipment and work activities, to meet and exceed the company's safety, quality, delivery, and cost objectives
  • Additional responsibilities include facility staffing planning, productivity planning, machine capacity analysis, process effectiveness analysis, project management, expansion needs analysis, material flow analysis, developing and maintaining engineered time standards, value stream mapping, process flow and line balancing,
166

Industrial Engineer Resume Examples & Samples

  • Solutions development, develop new work Method
  • Work Control
  • Result Evaluation
  • To perform ergonomic diagnostic of the positions and recommend improvement
  • To involve operators, management and support groups in developing proposals and during implementation
  • Participants in the challenge of indicators on the area being studied and facilitate or contributes to problem solving sequences
  • Graduated Bachelor’s Degree in the field of Industrial Engineer
167

Industrial Engineer Resume Examples & Samples

  • Promote and practice Arconic Business System concepts and philosophies within his/her span of control and responsibility
  • Recognize that accident and injury prevention are equal in importance to production, quality, delivery, recovery and cost control. The incumbent accepts the responsibility to work safely and promote safety consciousness among other employees
  • The incumbent shall take such steps to assure that all employment practices under his or her control, including hiring, promotions, demotions, and discipline are conducted so as to comply with equal employment opportunity laws and Alcoa company policy
  • Assist the production and maintenance managers and superintendents in developing and implementing plant improvements, more effective work methods and ABS. Work closely with other service departments (Accounting, Metallurgy, Planning and Scheduling, Engineering, etc.) to support overall plant objectives
  • Evaluate and analyze ideas to reduce operating costs or increase corporate profitability. Assist to implement all viable improvements. Use proactive efforts to maximize results. Quantify results where possible
  • Provide economic evaluations of capital improvement projects and other investments
  • Assist in the development of strategic manufacturing plans. Perform special studies (sales analysis, machine utilization, energy, production capacity, product profitability, etc.) and make recommendations to support the decision process. Provide strategic support to achieve and sustain an annual shipment capacity of 600 million pounds at the Lancaster sheet mill
  • Develop, maintain and review the machine hour and recovery standards used for product costing and production scheduling
  • Provide custom product costing and tolling estimates as requested
  • Provide specialized IE services such as ergonomic evaluations, major capital project evaluations, plant capacity analysis or energy management
  • Support Supply Chain Management as needed
  • Occasionally complete special assignments at other locations within the BU
  • List financial impact for assets, revenues, purchases, and capital or operating budgets, if applicable
  • Bachelor’s degree in Industrial Engineering, or Supply Chain Management from an accredited institution
  • Strong oral and written skills are essential
  • Good human relation skills to effectively work with cross-functional groups at all levels of the organization
  • Proficient with MS Office, Excel
  • Demonstrated work experience in manufacturing would be preferred
168

Ur-industrial Engineer Resume Examples & Samples

  • Currently possess or in final year of pursuing a Bachelor's degree or higher in a science or engineering from an accredited university
  • Minimum of six (6) months (academic or industry) process improvement projects experience
  • Previous distribution and/or manufacturing experience
  • Lean Six Sigma Green Belt project experience and/or certification
  • Candidate must have excellent interpersonal communication, analytical, and organizational skills to manage different priorities
  • Demonstrated ability to lead projects to successful, on-time completion in a safe manner as well as have the ability to be an active contributing team member
169

Industrial Engineer Resume Examples & Samples

  • 1 to 5 nights per month
  • Demonstrated experience as an industrial engineer providing leadership to plan, coordinate, develop strategies and execute effective corrective actions to enhance the overall supplier quality of products produced at an industrial/manufacturing facility
  • Professional registration -- Current registration as a professional engineer by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions
170

Industrial Engineer Resume Examples & Samples

  • Assists in establishing operational methods and work standards using various measurement techniques
  • Analyzes existing operations and proposes cost justified improvements
  • Proposes and evaluates the processes for equipment in assigned area
  • Provide layout analysis and updates using AutoCAD
  • Conduct Man-Machine analysis for throughput and ergonomics improvement
  • Provides technical support for specific plant operations
  • Ability to work any shift
  • Demonstrated strong analytical ability, communication and interpersonal skills required to build relationships with team members and customers to solve problems and resolve issues
  • Knowledge of work measurement and work standards
  • Knowledge of basic manufacturing and assembly processes
  • Demonstrated ability to manage smaller projects and assignments with medium level of autonomy and accountability for results (may work under the direction of a more seasoned engineer)
  • Demonstrated ability in project management skills
  • Understand how to use AutoCAD 2D; 3D preferred
171

Industrial Engineer Resume Examples & Samples

  • Utilize the corporate database to track ergonomics issues and document modification activity
  • Prepare required plant, divisional and corporate ergonomics reports and meet required due dates
  • Train Industrial Engineers in the use of Ergonomics Line Balance Assessments, respond to the assessment results, and assist in designing ergonomically correct job layouts
  • Support the launch of new products, mid-cycle enhancements or annual model changes through the review of new equipment, tools and processes as necessary including: mock-ups, design for assembly workshops, tool buyoffs, and other new product readiness activities
  • Respond to requests for operation assessments quickly using the appropriate analysis tools and corporate decision criteria to assist in assessing and possibly re-designing ergonomically correct job layouts
  • Support achievement of plant and departmental business plans
  • Escalate appropriate ergonomics issues and follow-up to drive progress and resolution
  • Lead ergonomic activity for current car issues on behalf of the Oshawa Car Plant
  • Drive the reduction of identified ergonomics issues
  • Resolve identified ergonomics issues in a timely manner by leveraging relationships and driving accountability / action
172

Industrial Engineer Resume Examples & Samples

  • Time Study experience
  • 5 - 7 years’ experience in Industrial Engineering in the Automotive Manufacturing environment
  • Plant layout experience
  • Microsoft office, ACAD, SAP
173

Industrial Engineer Resume Examples & Samples

  • Lead lean manufacturing/lead time reduction activities within the focus factory. Support short range focus factory capacity planning
  • Lead min to long range focus factory capacity planning
  • Apply statistical methods and perform mathematical calculations to determine manufacturing processes, staff requirements, and production standards
  • Draft and design layout of equipment, materials, and work space to illustrate maximum efficiency, using drafting tools and computer
  • Discuss with vendors, staff, and management personnel regarding purchases, procedures, product specifications, manufacturing capabilities, and project status
  • Review production schedules, engineering specifications, orders and related information to obtain knowledge of manufacturing methods, procedures, and activities
  • Review and verify quote standards on a quarterly basis at a minimum
  • Estimate production cost and effect of product design changes for management review, action and control
  • Develop manufacturing methods, labor utilization standards, and cost analysis systems to promote safe and efficient staff and facility utilization
  • Plan and establish sequence of operations to fabricate and assemble parts of products and to promote efficient utilization
  • Regulate and alter workflow schedules according to established manufacturing sequences and lead times to expedite production operations
  • Minimal travel may be required to meet the needs of the business
  • A minimum of a Bachelor's degree in Engineering or equivalent experience is required for this position; a Bachelor's degree in Engineering experience is preferred
  • Experience of 2 years is required for this position, assuming education requirements are met. Equivalent industry experience of 1 or more years is highly desired
174

Industrial Engineer Resume Examples & Samples

  • Drives Continuous Improvement in our plant operations
  • Develops an understanding of the equipment and manufacturing processes
  • Learns and uses Six Sigma tools such as DMAIC to solve problems
  • Uses LEAN principals to develop creative ideas to reduce waste and cost in the process
  • Participates in and eventually leads an interdisciplinary task force for equipment installations or to improve plant operations
  • Uses AutoCAD to develop, design, and recommend plant and equipment layouts
  • Researches equipment and selects vendors for new equipment purchase
  • Develops project justification (Return On Investment)
  • Develops facility capacity and utilization calculations
  • Utilizes work measurement to determine and recommend correct plant and line productivity requirements and employee staffing levels
  • Maximizes plant and line capacities
  • Uses ergonomic principles to develop and improve tools, equipment, and work stations
  • Utilizes simulation software to model plant operations to determine bottlenecks in the operation
  • Offers sound technical and engineering advice for facilities performance to include Overall Equipment Effectiveness (OEE)
175

Industrial Engineer Resume Examples & Samples

  • Ability to analyze data or information
  • Drafting(AutoCAD), laying out, and specifying equipment
  • Bachelor of Science Engineering Degree (Industrial/Mechanical preferred)
  • Prefer two years of experience
176

Industrial Engineer Resume Examples & Samples

  • Accountable for the successful completion of assigned engineering tasks and preparation of engineering deliverables
  • Communicating with Supervisors, Peers, or Subordinates -- Providing information to supervisors, co-workers, and subordinates by telephone, in written form, e-mail, or in person
  • Analyzing Data or Information -- Identifying the underlying principles, reasons, or facts of information by breaking down information or data into separate parts
  • Organizing, Planning, and Prioritizing Work -- Developing specific goals and plans to prioritize, organize, and accomplish your work
  • Drafting, Laying Out, and Specifying Technical Devices, Parts, and Equipment -- Providing documentation, detailed instructions, drawings, or specifications to tell others about how devices, parts, equipment, or structures are to be fabricated, constructed, assembled, modified, maintained, or used
  • Thinking Creatively -- Developing, designing, or creating new applications, ideas, relationships, systems, or products, including artistic contributions
  • Training and Teaching Others -- Identifying the educational needs of others, developing formal educational or training programs or classes, and teaching or instructing others
  • Bachelor of Science in Industrial or Mechanical Engineering
  • Prefer a minimum of 2 years in a Manufacturing Environment
  • Must be hands on
  • Familiarity with AutoCAD
  • Excellent computer skills in Microsoft Suite
  • O.S.T. comprehension preferred
  • Electrical knowledge a plus
  • Allen Bradley PLC knowledge required
  • Allen Bradley PLC program experience a plus
  • Experience with Atlas Copco Torque equipment a plus
  • Knowledge of Fanuc Robotics a plus
  • JIT Environment a plus
  • CI/Six Sigma/Lean training a plus
177

Industrial Engineer Resume Examples & Samples

  • Providing engineering support for the establishment of accurate labor standards using time study or equivalent techniques
  • Maintaining complete standards and methods documentation, perform all scheduled audits. Maintain Labor Management System, written procedures and layouts as needed to reflect changes in business requirements,preferred methodologies, etc. and insure continued accuracy of standard
  • Supporting of all performance management initiatives
  • Improving work methods by analyzing methods and procedures to ascertain the most efficient way to perform all warehouse tasks.(Reducing steps, travel, non-value added time, and waste, deploying best practices, works amplification, staff planning, balancing, and identification/removal of barriers to productivity)
  • Optimizing material flow (Travel reduction,process balancing, optimizing storage utilization and put-away logic, and efficient slotting)
  • Providing Operations team with necessary support and guidance for improving utilization of our resources (Direct and Indirect Labor, equipment, space, etc.)
  • Providing technical support for material handling system improvement(configuration, improved capacity, efficiency)
  • Monitoring and maintain a deep understanding of variables impacting key performance metrics, contributing input and support toteam in achieving targets
  • Providing guidance and support for cost reduction projects
178

Lean Industrial Engineer Resume Examples & Samples

  • Oversight, coordination and direction of lean programs and IE based change
  • Identify and detail projects and ROI's
  • Identify efficiency and productivity opportunities
  • Expand and sustain a broad lean based culture across the enterprise for all of its operating businesses and business segments
  • Leads, directs and advises collaborative teams within the enterprise for project completion
  • Process definition and management
  • Interacts with all levels and departments of management
  • Schedules, performs, facilitates, and participates in all activities related to lean/IE functions
  • Authorizes projects and track/report results
  • Organizes and prioritizes all projects and programs
  • References, interprets and applies lean and IE based principles
  • Develops project scopes, Requests for Proposals, developmental and organizational plans, and capital requests as needed
  • Provides expertise and support to facility and plant planning, design, and new production opportunities
  • Involvement in capital equipment planning and facility planning
  • Uses verbal communication skills to direct, inform and advise individually and in groups and writes engineering and administrative communications, technical reports, operating procedures and documentation
179

Industrial Engineer Resume Examples & Samples

  • Maintain capacity planning models used to establish resource (crew and machines) requirements to support the business operations
  • Develop and maintain cost models to support capital expenditure proposals and manufacturing cost savings initiatives
  • Implement and maintain production and incentive standards for all manufacturing work centers located in Berwick (Bows, Ribbons, Valentines and Tags Operations)
  • Program and maintain Access database for manufacturing production reporting
  • Manage existing programs and implement new programs to ensure accurate tracking and timely reporting of selected manufacturing performance measurement indicator (efficiency, utilization, labor variance, production schedule adherence, etc...)
  • Conduct processes, procedures and work centers activities internal audit, identifying efficiency improvements and/or cost savings opportunities
  • Work with manufacturing, pricing and marketing departments to develop labor estimates and equipments requirements used to competitively price new products and designs
  • Assist Cost Accounting division with projects related to standard costing process and analysis
  • Provide engineering support “as-needed” to all the departments within the organization
  • Communicate effectively with employees at all levels of the organization
  • Produce engineered AutoCAD drawings for mechanical parts, plant layout etc
  • Special projects and all other duties as assigned
  • Conduct plant tours for guests and internal employees as requested
  • B.S or higher in Industrial Engineering or related major strongly suggested
  • 0 - 3 years in Industrial Engineering position. Experience in lean manufacturing and six sigma applications highly desired
  • Intermediate to advanced Computer skills (Microsoft Access, Excel, Outlook, and Word), ERP (MAPICS & JDE) proficiency
  • Advanced analytical skills & technical writing
180

Industrial Engineer Resume Examples & Samples

  • Responsible coordinating the successful launch of New Product Introductions (NPI) within operations
  • Implement demand driven principals and strategies that supports operational excellence and long range plans.(Flexibility, Speed & Responsiveness)
  • Deploy standard Generac tools, methodologies, standards, practices and processes
  • Implement objectives to include continuous improvement initiatives to achieve customer satisfaction and fulfillment needs
  • Work closely with shop floor personnel to promote ongoing Continuous Improvement of manufacturing methods, systems and controls
  • Responsible for area layouts, process definition, and equipment justification, selection, and implementation
  • Bachelor’s Degree in Engineering or Industrial Technology
  • Knowledge of lean principles and process improvements
  • Demonstrated skills in problem solving and conflict resolution
  • Industrial Engineering experience
181

Industrial Engineer Resume Examples & Samples

  • Coordinates the implementation process of new means of manufacturing, the changes and optimizations within the existing processes and flow production
  • Develops and implements the cost reduction projects, updates production layout area, participates in FMEA and continuous improvement teams
  • Coordinates the installing and putting into operation processes for the new equipments and machines
  • Participates or coordinates product and technology transfer projects; concern for continuous improvement of production processes and production flow, implementation of rationalizations
  • Ensures the implementation of specific procedures of Integrated Quality Management System in his/hers area of responsibility
  • Implements action plans resulting from audits, assessment of suggestions for improvement
  • Participates in the calculation and definition of the production norms: realization and analysis of time studies, participates in making suggestions for improvement as result of normalizations
182

Industrial Engineer Buzias Resume Examples & Samples

  • Providing coordination and technical expertise necessary for the implementation of new means of manufacturing, changes and optimization within the existing processes and flow production
  • Development and implementation of cost reduction projects, continuously updating the layout of production areas and of places for work; participation in FMEA teams and continuous improvement
  • Participation or coordination in product and technology transfer projects; concern for continuous improvement of production processes and production flow, implementation of rationalizations
  • Implementation of action plans resulting from audits, assessment of suggestions for improvement
  • University degree in technical field: Machines Construction Technology / Electro-Mechanics
  • Relevant experience in production processes, Industrial and Maintenance Engineering, in Mechanics and Electro-Mechanics
183

Industrial Engineer Resume Examples & Samples

  • Experience in implementation of World Class Manufacturing in union environment is a plus
  • Knowledge of Time Studies/Standards, Ratings, MODAPTS, Ergonomic Evaluation and Budgets
  • Although generally assigned to 1st shift, must be willing and able to work any shift
  • Prior experience in a union environment with excellent computer skills with Workflow and Workstation Design experience is preferred
  • Must be dependable, detail oriented, a creative thinker and self-motivated
  • Working knowledge of spreadsheet and database software is preferred
184

Industrial Engineer Resume Examples & Samples

  • Exceptional interpersonal skills and an effective communicator
  • Possesses a strong working knowledge of Lean, including the underlying theories and concepts of modern manufacturing, based on Toyota Production Systems, and other global best practices
  • Working knowledge of production, quality and product engineering
  • Broad understanding of business systems, organizational culture and behaviors
  • Working knowledge of environmental, health, safety and quality regulations
  • Bachelor’s degree in Engineering (industrial or similar) and a minimum of 5 years of successful and progressive experience, or a minimum of 10 years of progressive and demonstrated expertise in the above mentioned areas of application, preferably in a Lean environment
185

Industrial Engineer Resume Examples & Samples

  • Analyze and improve processes with a focus on lean optimization
  • Support warehouse and process adjustments for improvement and space availability changes
  • Develop layouts
  • Develop business cases for improvement projects such as external warehousing, variant reduction, and automation
  • Direct workflow for changes and training for implementation
  • Create documentation for training materials such as job cards, standard work, and standard operating procedures
  • Gather part data for inventory and database accuracy and improvement projects
186

Industrial Engineer Resume Examples & Samples

  • Improves manufacturing efficiency by analyzing and planning work flow, space requirements, and equipment layout
  • Provides statistical information for quality improvement by identifying testing methods and samples
  • Assures product and process quality by designing testing methods; testing finished- product and process capabilities; establishing standards; confirming manufacturing processes
  • Provides manufacturing decision-making information by calculating production, labor, and material costs; reviewing production schedules; estimating future requirements
  • Develops Standard Operating Procedures for all processes within but not limited to the Pre-finish Department
  • Develops Quality Control Charts within but not limited to the Pre-Finishing Operation
  • Analyzes data by completing hypothesis, normal distribution, and process capability analysis tests
  • Prepares reports by collecting, analyzing, and summarizing data; making recommendations
  • Build and maintain multi-variable standards, including the performance of time studies, regularly scheduled standard validation, best-method development, documentation and training
  • Build understanding and gain “buy-in” of approved standards by Millwork personnel.· Prepare and maintain documentation for each operation describing methods and procedures, engineering notes, engineering records (such as time study data), standards, and pay variable definitions
  • Produce various performance reports on a daily, weekly and monthly basis
  • Other responsibilities include: budgeting support, facility layout design, ergonomics, material handling equipment, process improvement, cost-benefit analysis, and capacity analysis
  • Bachelor’s Degree in Industrial Engineering or related technical field
  • Manufacturing/Assembly background
  • Statistical Process Control
  • SOP Development/Implementation
  • Technical knowledge of assembly/manufacturing
  • Strong Microsoft Access
  • Good working knowledge of AutoCAD
  • Ability to communicate in Spanish a plus
187

Industrial Engineer Resume Examples & Samples

  • Working within a company that does multi-site manufacturing
  • Lighting manufacturing experience a plus
  • Preferred experience with Oracle ERP
188

Industrial Engineer Resume Examples & Samples

  • Establish operational methods and work standards using various measurement techniques
  • Provides and analyzes information for various management systems
  • Record and analyze information on specific problems assigned in the utilization of personnel, material, machines and facilities
  • Work well with various engineering disciplines, floor and shop personnel and outside suppliers
  • Confirms or recommends changes to layouts, labor control and/or material control
  • Establish packaging methods and Bill of Material for new products
  • Must support plant in achieving Safety, People, Quality, Responsiveness and Cost goals
  • Must support/implement GMS (Global Manufacturing System) strategies
  • Must be willing to work any assigned shift, work daily, weekend, and holiday overtime as required
  • Knowledge in MS Word, Excel and PowerPoint – Intermediate level
  • Knowledge of GM/UAW Ergonomic Standards
  • Good of interpersonal skills involving ability to work effectively cross-functionally and cross-culturally
  • Good written and oral communication skills necessary for meetings and presentations
  • Ability to lead small teams, work well with others and exhibit teamwork skills
  • Partners with Industrial Engineering management to analyze and solve issues
  • Strong knowledge of work measurement and work standard methods
  • Ability to utilize AutoCAD for plant layout analysis
  • Ability to coordinate system simulations and design process
  • Strong knowledge of manufacturing and assembly processes
  • Ability to conduct line balancing activities
  • Areas of expertise include: Manufacturing, Assembly Process, Ergonomics, and Packaging
  • Bachelor of Science in Industrial Engineering
  • Position Related experience – 2 years +
189

Co-op-industrial Engineer Resume Examples & Samples

  • Support Manufacturing Departments during execution of Model Programs by providing AutoCAD layouts, Time and motion study data, Ergonomic Analysis, station design, etc
  • Provide Material Flow Analysis, and design/install material flow racks and systems
  • Analyze cyclic and non-cyclic work, and audit workplace documents for compliance
  • Collect and analyze production throughput data, and assist with running weekly TIP review workshops
  • Assist in maintaining Plant documents such as Evacuation Maps, Defibrillator locations, Magnetic Field surveys and Waste Stream Analysis
  • AutoCad, Time and Motion Studies
  • Strong organizational, problem solving and analytical skills
  • Highly adaptable and able to work independently and in a team environment
  • Fluent in the English language
190

Industrial Engineer Resume Examples & Samples

  • Ideally the candidate should be min HNC (or equivalent) qualified, degree preferred
  • Previous Industrial/Process engineering experience dealing with commercial and operational activities ideally within an Offshore Service environment
  • Experience managing and developing internal / external customer relationships
  • Product technical knowledge would be advantageous
  • Ability to Travel to various locations to support Projects in the UK
  • LI-MS
191

Industrial Engineer Resume Examples & Samples

  • Support factory capacity and headcount planning
  • Maintain various Industrial Engineering databases
  • Learn and apply standard time calculation, lean manufacturing, capacity study, 5S and process time utilization/reduction on all projects
  • Provide support for the Manufacturing and other depts
  • Assist with streamlining manufacturing techniques and processes in the production area through methods and work flow design improvement, factory systems improvement, standard setting, and workforce training to ensure productivity, cycle time, quality and cost reduction goals of the company are met
  • Support production headcount and activities for improvement
  • Standards setting, methods improvements, and systems/reports improvements to ensure that value added work is performed in the most efficient manner possible
  • A bachelor’s degree in Industrial Engineering, Manufacturing Engineering or Supply Chain Management
  • Motivated to grow within the semiconductor manufacturing field
  • Strong proven written and verbal communication skills, utilizing Word, Excel, Access, and Microsoft Project
  • Interest and ability to understand statistical analysis programs as well as flow chart software such as VISIO
  • Desire to work with Lean manufacturing methods, procedures, and cost reduction techniques
  • Programming knowledge, preferably experience with Visual Basic macros and database / SQL
  • Manufacturing simulation experience is a plus
  • Strong analytical and problem solving skills and the ability to recommend and make decisions based on different data sets
  • Ability to work effectively with direct team and across functional teams
  • Ability to work under pressure, with minimum supervision in a dynamic environment
192

Industrial Engineer Resume Examples & Samples

  • Provides support to project completion. Utilizes engineering methods (e.g., mathematical models, simulation, statistics) to support the development of optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products
  • Under general direction, analyzes and designs value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout)
  • Experience with MS Project, Excel, PowerPoint
  • 1+ years' experience as Master Scheduler
  • Experience utilizing integrated master tools (i.e. BRAIDS)
  • 3+ years experience utilizing integrated master tools (i.e. CSPR Cost, Schedule, and Reporting)
193

Industrial Engineer Resume Examples & Samples

  • Previous Project Management Experience is a plus
  • Experience in the evaluation, analysis, and optimization of operational processes
  • Proven ability to exercise good judgment when evaluating multiple solutions
194

Industrial Engineer Resume Examples & Samples

  • Development, tracking and continuous improvement for the Value Stream annual budget for labor, waste and expenses
  • Development, tracking and continuous improvement on KPIs for Value Stream
  • Define and deploy leading indicator metrics for Value Streams
  • Management of team development, activities and deliverables for Production Support team
  • Deploy through training and coaching Lean Strategies
  • Support Activity Management process as it relates to the Value Stream
  • Manufacturing flow, technical requirements
  • Lean Manufacturing concepts
  • Training, validation and certification
  • Project planning and project management
  • Spreadsheet enabled analysis and presentation
  • Presentation and writing skills
  • Five (5) plus years of exposure to manufacturing, industrial engineering and continuous improvement through Lean or related techniques and/or a Bachelors degree in Industrial Engineering
195

Industrial Engineer Resume Examples & Samples

  • Project management software, Microsoft Office Suite, Autocad, Inventor or Catia
  • Excellent communicator and team player
  • Analytical mind and problem solving skills
  • Initiative and organization
  • Ability to travel to Canada frequently
196

Industrial Engineer Resume Examples & Samples

  • Interact with our clients’ shop users
  • Develop the process flow and adjacency diagrams
  • Determine the future requirements
  • Determine the spaces and areas of the spaces
  • Determine the industrial equipment and furniture requirements
  • Layout the facility on the site
  • Layout the equipment within the facility
  • Prepare the procurement specifications and drawings for industrial furniture, shop equipment and specialized material handling equipment
  • Drafting using AutoCAD and/or Revit – 30% of the time and
  • Multi-disciplinary design coordination
  • Bachelor’s degree in Industrial, Mechanical or Integrated Engineering with at least one year experience in manufacturing/industrial facility functional layouts, preferably using Lean/IE principles
  • Some experience in the specification of industrial/processing equipment is beneficial
  • Experience using recent versions of AutoCAD or Revit is required along with MS Project and Visio software
  • Highly effective interpersonal communication skills and people management ability required in working with clients and analyzing their requirements, communicating with shop staff and construction personnel as well as coordinating multi-disciplinary engineering and CAD team project efforts
  • Excellent ability in writing clear and articulate reports
  • Some project management and/or LEED® experience is an asset
  • Registration or credentials to register as an Engineer-in-Training with APEGBC
197

Industrial Engineer Resume Examples & Samples

  • To update plant layout drawings and space utilization
  • To design, plan , source and purchase, evaluate, standardize of production/office furniture and recommend disposal as required
  • To provide input to new product RFQ4. To carry out Line Balancing, Process Improvement, Time Study, and Space Planning
  • To plan, design & co-ordinate projects undertaken by Flextronics
  • To improve material handling, material flow, material storage & FG storage area
  • CapEX compilation and Submission
  • Liaise, Coordinate and Monitor the Line setup progress
  • Design & update layout for additional or any changes on these areas: building production line office area warehouse others (car park, utility building, canteen, etc.)
198

Industrial Engineer Resume Examples & Samples

  • A Bachelor of Science degree in a STEM program including Computer Science OR other bachelor degree in a STEM program (including Computer Science) that included 12 semester (or 18 quarter) credit hours in mathematics, including differential and integral calculus and applied mathematics and 10 semester (or 15 quarter) credit hours in natural science (biology, chemistry, earth sciences) including physics is required by Spring/Summer 2017
  • US Citizenship or Permanent Residence is required
  • Experience with LEAN Manufacturing
  • Experience with Green or Black belt projects
199

Industrial Engineer Resume Examples & Samples

  • Perform his/her own work performance within the Company, taking care of his/her own safety and the safety of other people in the workplace. Contribute with other functions to fulfill the duties under health and safety regulations with respect of the environment. Immediately inform the responsible of the area about all risk situations identified so that to solve them
  • Analyze productive and quality data and trend, using available reports. Guarantee the management of existent production reports and define the specifics of new ones, according to Manufacturing requests; he/she is the reference for IS for the realization of new reports. Ensure the correctness of iMEL, directly interfacing with IS, Manufacturing and Mechanical and Electrical Maintenance
  • Propose and act corrective actions in order to reach production and qualitative indexes collaborating to Problem Solving activities. Propose and realize improvement projects of the process, quality and KPIs, using the foreseen methodology (ex. PDCA) and promoting the culture of Continuous Improvement and Team Work
  • Support Manufacturing and Technical Training in the writing of new production standard, in the definition of best practice and in the verification of the application of production procedures. Write and review job analysis of production people applying the foresee methodology for risk reduction
  • Master’s degree in mechanical engineer or equivalent
  • You have 2/3 years of technical experience in Industrial Companies
  • Excellent written and verbal communication skills in Italian and English. Ability to communicate effectively (up, down, and laterally, including technical and non-technical personnel) with others with strong communication skills
  • You have good command of Excel
200

Industrial Engineer Resume Examples & Samples

  • Experience (or internships) with manufacturing, warehouse operation including demonstrated examples of concept, designing and/or implementing process improvements to safety, quality or productivity metrics
  • Demonstrated ability to work well with multi-functional groups in a team environment
  • Excellent relationship building, negotiation and conflict resolution skills
  • Proficient in Excel and other Microsoft Suite computer products
  • Ability to work flexible hours to support business operations
  • Experience working with incentive pay systems, especially gain sharing programs such as CIPP (Continuous Improvement Pay Plan)
  • Experience with establishing output standards and base development for new processes
  • Experience or knowledge with IT tools or programming languages, including, SAS, DB2, and/or SAS/DB2 interface, as well as TSO and JCL
  • Ability to utilize AutoCAD to develop warehouse layouts
  • Ability to analyze and financially justify capital expenditures
  • Bachelor’s Degree in Engineering and/or related discipline(s)
201

Industrial Engineer Resume Examples & Samples

  • Sound understanding of time study and motion analysis, operation and method analysis and breakdown. Conducts studies relating to various operations; capacity, equipment, and labor as required
  • Develops manufacturing methods, labor utilization standards, and cost analysis systems to promote efficient staff and facility utilization
  • Performs work sampling, method and delay studies and capacity studies, as required
  • Prepares layouts and designs using software such as Auto CAD or similar
  • Applies statistical methods and performs mathematical calculations to assess manufacturing processes, staff requirements, and production standards
  • Research and develop new processes, conferring with vendors, staff, and management as needed
  • Prepares cost analysis (ROI) for management review
  • Proficiency level in the use of computer aided design software, as well as data analysis and spreadsheet software, such as Microsoft Excel. Regular use of Microsoft Word, and occasional use of PowerPoint, and Visio, may be required
  • Participates in product measurement, inspection, and testing activities to ensure, processing methods, quality control, reliability, and integrity of internal processes
  • Will participate in collection and creation of labor and/or materials data used for budget purposes. May be assigned various budget activities, including labor calculations and other expense detail, capital investment justification, asset review, and general research regarding capital expenditure requests
  • Although this job has no direct supervisory responsibility, as Industrial Engineer, you may be requested to participate and/or attend various Supervisory and Managerial staff meetings and functions
  • Can recommend or requisition supplies, tools, hardware or software, following established Sarbanes Oxley Purchasing Guidelines
  • Must be willing and able to take an active role in plant wide safety activities
  • May be required to assist Production Supervisors with periodic meetings (if applicable) to include safety related issues or items. Periodic could mean weekly, monthly, bi-monthly quarterly, etc
  • Authority to ensure that hazards are corrected or necessary changes to the safety and health management system are addressed
  • Bachelor’s Degree in Science
  • Industrial and Operations Engineering, Mathematics, Science, or related Business degrees
  • Three to five years experience in related field
  • High aptitude in basic, statistical math and analytical skills
202

Field Industrial Engineer Resume Examples & Samples

  • Conducts studies to determine the most efficient sequence of operations and workflow by analyzing production costs, process flow charts, and production schedules
  • Prepares cost estimates for proposed projects and evaluates cost factors; recommends changes in each Service Center/Gateway pertaining to cost control, as well as time and motion, work standards, work methods, personnel utilization, service, and quality
  • Coordinates routing system changes with airline, hub and ground network in order to optimize service cost
  • May monitor and evaluate departmental reporting systems
  • Monitors and evaluates each Service Center/Gateway's progress in managing service and cost
  • Experienced Professional contributor with responsibility for an advanced area of work in the professional field
  • Requires BS/BA in related discipline and 2-5 years of experience in related field or MS/MA and generally 2-5 years of experience in related field
  • Professional certification required in some areas
  • Individual must have the ability to perform to a high standard
203

Industrial Engineer Resume Examples & Samples

  • Interact with craftsmen, supervisors, technical engineers and non-technical operations personnel to integrate planning, work execution and system or process changes
  • Provide technical support in the efforts of “continuous improvement’ with regards to process efficiency and plant wide safety
  • Update existing plant and maintenance equipment records and processes, as well as provide technical trouble shooting support to maintenance and operations usually involving our EAM (Enterprise Asset Management) Software or CMMS (Computerized Maintenance Management Systems)
  • Provide critical expertise on maintenance processes to include the management of planned maintenance work, organizing work packages, coordination and facilitation of plant outages, coordination and facilitation of plant projects
  • Support maintenance and operations by assembling work plans to improve performance and reduce waste
  • Develops solutions by designing and modifying standard processes usually involving our EAM (Enterprise Asset Management) Software or CMMS (Computerized Maintenance Management Systems)
  • Monitors and maintains a comprehensive set of performance metrics for the plant and collaborates with others to maintain, adjust and improve performance
  • Practical Knowledge of mechanical applications, including mechanical drives, thermodynamics, heat transfer, materials, and hydraulics
  • Practical Knowledge of electrical applications, including drives, controls, automation, and electrical components
  • Practical Knowledge of common industrial processes: welding, assembly, machining, cutting, measuring, piping, alignment, electrical termination, electrical component assembly, fabrication and analysis methods
  • Be able to read and interpret mechanical and electrical prints and diagrams
  • Ability to lead a project from design through installation and startup – including associated operational and maintenance training
  • Ability to use sound and solid judgment in high pressure situations
  • Comfortable and confident in time management and multitasking skills needed for working under deadlines
  • Team building and supervisory skills leading project teams and comfortable with supervising technical and non-technical personnel
204

Industrial Engineer Resume Examples & Samples

  • Maximize the performance of the field operations organization by creating innovative process improvement solutions and promoting the adoption of best practices and standard operating procedures. This will include new technology and up to date practices
  • Ability to develop and sustain effective working relationships with leaders to influence and align people at all levels to support performance objectives
  • Lead and support the application of quality systems and structured improvement business system frameworks (i.e. HPT, Lean, Six Sigma)
  • Partner with team members in the use of structured improvement system techniques like HPT, Lean, Six Sigma and other techniques
  • Ability to take strong and sometimes contrary positions when required
  • Identify and recommend new process improvements, supply chain opportunities, technological enhancements and workflow efficiencies. Sell and influence positive change in the organization
  • Provide tactical support for the facilities, allowing them to continue operating without interruption
  • Find synergies and best practices among the multiple business units that drive cost savings, improve processes, and consistency of the customer experience
  • Integrate systems across business units
  • Understands and demonstrates Essendant's Core Values
  • Ability to effectively apply Operations Research methods (mathematical modeling, statistical analysis, and optimization) in a multi building distribution environment
  • Expertise in measurement, data collection, analysis, interpretation and presentation to support decision making or change management
  • Strong ability to lead and work with cross-functional business and/or process teams
  • Strong problem solving skills – inquiry, analysis, fact finding and solution identification
  • Expert and proven workflow improvement ability
  • Strong written and oral communication skills to effectively communicate thoughts and sell ideas
  • Solid understanding of continuous process improvement methodologies: 6 Sigma, Lean, etc
  • Strong collaborative skills to interact with other functions
  • Ability to learn new systems quickly and serve as a subject matter expert in a short timeframe
  • Strong time management skills and proven ability to work within constrictive timelines
  • Working knowledge of analytical and programming tools such as Minitab, R, Visual Basic, etc
  • Strong PC skills: Outlook, Access, Excel, PowerPoint
  • Strong customer-focus
  • Strong data collection/mining skills
  • Intermediate familiarity of industry trends
  • Bachelor’s Degree in engineering, logistics, or related field
  • A minimum of two years of engineering experience in distribution and warehousing or in manufacturing with a focus on supply chain management required; four years of experience preferred
205

IT Industrial Engineer Resume Examples & Samples

  • Preform analysis and process studies of existing and new operations using flow chart software
  • Perform data analysis for predictive outcomes that could be used for decision making
  • Develop system requirements and communicate these in both written and verbal form to the IT department and upper management
  • Act as project manager for large system implementations
  • Use data, analytics, and simulation to identify dock layout and process flow improvements
  • Test System products developed or purchased by the IT department
  • Implement systems and work with trainers to develop curricula
  • Re- engineer processes, practices, and procedures
  • Bachelor’s Degree in Industrial Engineering from an accredited university; BSIE or MSIE is a plus
  • Minimum of 2 years’ experience as an Industrial Engineer
  • Experience successfully implementing LEAN principles in an operations organization (Certification as a LEAN trainer is a big plus)
  • Experience supporting multiple locations
  • Excellent written and verbal communication skills; the ability to formulate an argument for changed to current business practices in both verbal and written formats and develop IT requirements for software development
  • Ability to travel by airline in the US and Canada (25% of the time)
  • Flexible work hours as needed (in order to work with evening and night shifts)
  • Ideal candidate will possess a “can do” attitude with a “will do” work ethic
  • Must have the ability to work in a fast paced environment
  • Ability to communicate effectively with all levels of operations
  • General computer skills - Microsoft Office, Outlook and AS400
206

Industrial Engineer Resume Examples & Samples

  • Degree in Industrial Engineering required
  • At least 1 years of specific problem solving experience and progressive responsibility in leading improvement initiatives
  • Demonstrated ability to lead teams and implement projects through continuous improvement initiatives with hands-on application - engaging floor practitioner
  • Experience in implementing Lean systems at the plant level (e.g..Quick Change Over, Total Productive Maintenance, 5S, Kaizen events, level scheduling, KanBan systems, and Value Stream Mapping)
  • Experience as a Lean and/or Six Sigma trainer is desirable
  • Visa Sponsorship is NOT available for this role
  • Ability to interact with various levels of the organization
  • Ability to build credibility and trust within the organization
  • Ability to influence leaders, their impact behavior, and thinking
  • Demonstrate an understanding of the broader organization, and how this role fits into the strategic plan and overall direction of Gates
  • Create alignment so employees understand the strategy and how their contribution further organizational success
  • Reinforce the business plan and strategy by building a disciplined, consistent approach with measurements of success
  • Bring focus, purpose, and agility to motivate others to adapt quickly to changing business needs
  • Prove ability to raise the performance bar – create, promote, and sustain a high performance culture that reinforces accountability
  • Orchestrate and prioritize multiple activities at once to accomplish Company goals
  • Take the initiative to look for and take advantage of opportunities and take independent actions and calculated risks
  • Work with internal and external stakeholders in a variety of formal presentation settings
  • Write reports, business correspondence, and procedure manuals
  • Demonstrate ability to drive and report metrics
  • Must be proficient with the use of Microsoft Office Suite (Outlook, Word, Excel, PowerPoint)
  • Must be proficient in 2D layout design using CAD
207

Industrial Engineer Resume Examples & Samples

  • Oversees maintenance of property, including but not limited to offices, machinery and equipment, and warehouses through development and implementation of preventative maintenance program
  • Oversees maintenance of plant utility systems and components for electricity, water, steam, gas, compressed air, plant coolers, air conditioning, heating, and ventilation
  • Responds in timely manner/deploys and assists maintenance crew as needed to deal with machinery breakdowns and minimize downtime; determines need for outside/technical assistance and coordinates efforts
  • Sets daily/weekly agenda for activities of the maintenance crew
  • Manages inventory of parts, materials, and equipment necessary to maintain the facility/production lines; determines appropriate items for “spare parts” inventory
  • Interfaces with operation’s management team to develop budgets for capital expenditures and maintenance of existing equipment and facilities
  • Provides specifications and issues Purchase Orders for equipment, parts, and supplies relating to plant maintenance operations
  • Furnishes engineering, designs, specifications, bills of material, and cost estimates for construction and major rehabilitation of property, and for projects involving installation and relocation of equipment
  • Maintains property records, surveys, equipment history records, manuals, warranties, and maintenance/engineering resource materials
  • Maintains current drawings, schematics, and files for plant/facility structures, systems, and equipment
  • Maintains a master plan for future improvements/expansion of the plant
  • Prepares accurate and timely reports, statistics, drawings, and recommendations as required
  • Interfaces with staff managers, outside contractors, and engineers related to facility upkeep, renovations, or construction
  • Interfaces with federal and state plant inspectors, boiler inspectors, and local code enforcement officers
  • Understands ISO 9001certification principles and policies and insures compliance with ISO 9001Standard Operating Procedures as related to plant maintenance program and activities
  • Be an alternate for the crisis management team and be responsible for Product Safety and Quality
  • Follow all Product Safety guidelines, such as, but not limited to
  • GMP’s
  • HACCP
  • Sanitation
  • Minimum ten years’ experience in a Plant Engineering role or related capacity
  • Associate Degree or higher in one or more relevant Engineering field(s), or equivalent knowledge with emphasis on mechanical, electrical, industrial and civil engineering disciplines
  • Thorough knowledge of federal safety regulations and electrical codes
  • Ability to read, analyze, and interpret technical procedures, government regulations, and general business periodicals
  • Ability to apply advanced mathematical concepts such as exponents, logarithms, quadratic equations, geometry, and trigonometry
  • Ability to generate mechanical drawings and apply graphical development techniques
  • Strong organizational, problem solving, and analytical skills; ability to define problems, collect data, establish facts, and draw valid conclusions
  • Ability to interpret mechanical and electrical schematic diagrams; interpret an extensive variety of technical instructions in mathematical or diagram form
  • Familiar with basic computer concepts and operations; proficient on Microsoft Office Suites, CAD/drafting software, and Maintenance software
  • Ability to manage priorities and work flow, handle multiple projects and meet deadlines
  • Ability to understand all safety requirements and cautions
  • Ability to perform any necessary physical labor
  • Ability to speak, read, write and understand the primary language(s) used in the workplace
  • Strong interpersonal skills; ability to deal effectively with a diversity of individuals at various organizational levels
  • Expert in wide variety of manufacturing machinery/equipment systems, including: PLC controllers, variable frequency drives, DC controllers, servos, instrumentation, sensors, photo electrics, form/fill/seal machines, cartoning machines, milling equipment, code dating equipment, screening/classifying/separation equipment, volumetric filling, statistical scale filling, motorized conveyors, labeling machines, box closers, hot melt systems, pumps and controllers, label applicators, metal detectors, all types of power transmission components, and all types of motors and electrical control devices
  • Expert in wide variety of facility support systems, including: plumbing, electrical, steam generation, compressors, and plant air system design
  • Expert in use of testing and measuring instruments for both electrical and mechanical applications, all types of welding and cutting equipment, shop machinery and power tools, drafting tools, CAD software
  • Ability to “troubleshoot” malfunctioning electrical and mechanical systems and provide accurate diagnostic evaluations
  • Familiarity with lubrication theory, lubricants, and proper application of such
  • Ability to operate man lifts and fork trucks safely and efficiently
  • Understanding of basic principles of the ISO9001 program and other product safety policies/procedures"
208

Industrial Engineer Co-op Resume Examples & Samples

  • Creating manufacturing floor work centers which incorporate the concepts of material handling, process flow, human factors and plant floor systems
  • Create and coordinate documents (following publishing standards) working with Industrial Engineering Lab technicians, Development Engineering staff and New Product Introduction Engineers
  • Direct IE Lab Technicians towards tasks to accomplish project deliverables
  • Must be currently attending a college or university pursuing a Bachelor's degree in Industrial or Mechanical Engineering
  • Must have and maintain a 3.0 GPA or higher
  • Microsoft Office proficient (Word, Excel, PowerPoint)
  • AutoCAD, Standard Time Data System Knowledge (MTM, MOST, etc.) required
  • Both written, and oral communication skills required
  • Teamwork experience
  • Experience leading a team or group in work, school or volunteer setting preferred
209

Industrial Engineer Resume Examples & Samples

  • Record and analyze information to identify problems and improve system utilization in personnel, material and machines
  • Conduct delay studies in manufacturing, assembly and GSC processes to identify and correct bottleneck operations
  • Must Identify hazard and safety issues related to manufacturing and assembly process utilizing GM safety and hazard risk assessment system
  • Must Identify manufacturing process and environment safety hazard utilizing GM
  • Strong knowledge of work measurement utilizing STDS
  • Strong Knowledge of GM safety and hazard risk assessment system
  • Good interpersonal skills involving ability to work effectively across functional teams
  • Strong knowledge of plant and equipment layout utilizing AutoCAD per GM standards
  • Strong knowledge of Safety failure mode and effect analysis (S-FMEA)
  • Knowledge of transmission manufacturing, assembly and GSC processes
  • Knowledge of In-plant pedestrian and vehicle interaction (PIV) system to reduce safety risks
  • Good knowledge of MS Word, Excel and PowerPoint
  • Planning and organizational skills
  • College degree with major in Engineering
210

Industrial Engineer Resume Examples & Samples

  • The SPLs own the strategy for the segment to ensure that WIP is moving through the segment, PMs are aligned according to WIP and any roadblocks are anticipated/removed
  • The SPLs are the coaches that pull module GL’s and Eng’s, together to meet Segment CSI’s
  • The SPLs provide the global picture for the team w/the input from the IMT Leaders
  • Education: Industrial Management Eng
  • Strong understanding of Mfg. Operations, CT, impact on CT & Line Management
  • Inter-personal and integration skills – ability to collaborate with many people (tool owners, Integration IMT’s, other SPL’s)
  • Multi-tasking – work in tight timeline, respond fast
  • Leadership skills – ability to take operational decisions
  • Strong analytical and deep data analysis capabilities , problem-solving, and project\programs -driving skills
  • Strong self-initiative and self learning capabilities
  • Excellent interpersonal skills and Strong integration skills, ability to collaborate with stakeholders
  • Good presentations and communication skills
  • Good computer \systems capabilities and skills
211

Industrial Engineer Resume Examples & Samples

  • Creative problem solver. Accustomed to developing creative solutions to new problems
  • Manufacturing experience in a Semiconductor environment is a plus
  • Familiarity with lean manufacturing and six sigma principles
  • Personality: high-level thinker that pays attention to details, organized, hands ON contributor, intelligent, and exceptionally competent
  • IE degree with 2+ yrs operational experience demonstrating skills above
  • Self starter; good with interpersonal communication for cross functional team facilitation
  • Candidate must be a US Citizen or Green Card holder
212

Industrial Engineer Resume Examples & Samples

  • Develop cost estimates/feasibilities for pack out designs
  • Conduct and coordinate efficiency studies in production areas to optimize process
  • Create and maintain items, as well as, structure BOMs for all projects
  • Create and maintain labor routings for all packaging processes
  • Verify process and site capability to ensure standards are achievable
  • Develop preproduction documentation and SOPs for manufacturing execution
  • Maintain controlled document libraries
  • Coordinate, as required, meetings for production readiness
  • Assist in the development of new designs, processes and capabilities to improve utilization of organizations resources
  • Assist in the development of cost analysis on CIP opportunities
  • Lead and organize optimization projects and presentations
  • Travel. Position supports offsite fulfillment locations
  • BS in an Engineering discipline, preferably Industrial
  • Experience in leading and managing continuous improvement projects in operations environment
  • 3-7 years of experience supporting high volume production environment is preferred
  • High degree of organizational skills and experience in process optimization
  • Ability to construct and publish clear and concise reports on such items as feasibilities, productivity improvements and SOP’s
213

Industrial Engineer Resume Examples & Samples

  • Sets up and captures time study elements
  • Performs basic statistical analysis and cost estimates
  • Applies statistical methods to estimate future department needs and analyze product/process performance
  • Demonstrates ability to complete well defined basic tasks and/or projects
  • Identifies and resolves defects of basic scope using proper engineering tools and techniques
  • Learns how to use and apply engineering tools relevant for performing the essential functions of this job description
  • Communicates status of work clearly providing visibility to supervisor or mentor
  • May be responsible for planning own technical work
  • Demonstrated capability for applying industry standards and procedures to develop, implement, and document operational processes
  • Ability to learn how to use and apply engineering tools
  • Must demonstrate the capability to perform basic troubleshooting & debugging
  • Demonstrates understanding of lean tools and methods
214

Industrial Engineer Resume Examples & Samples

  • Equipment capacity management. Manage the capacity for different departments and steps for different machine model, and maintain systems regularly
  • Equipment utilization management. Tracking the equipment utilization for production line and key steps, like wafer saw, die bonding, wire bonding, mold
  • Labor productivity management. Professional methods or tools are needed, like time study, motion study, to distribute man-power more scientific
  • Standard process time setting. Work with MFG, NPI team to define and test the standard process time (ASU & UPH) by device level
  • Facility space/ layout management. Space fully utilized and equipment layout optimization in order to optimize the routing for both labor and materials moving
  • Leveling production & Kanban management to make the conversion between different device groups more effective and consecutive, in order to improve the utilization for both labor and equipment
  • Eliminate or reduce waste due to transportation, inventory, motion, waiting, over production, over processing, defect for cost saving
  • With the help IE methods like Quality management, Process control, Six Sigma to satisfy the Total Quality request
  • Other IE improvement
215

Industrial Engineer Resume Examples & Samples

  • 5) Utilizes the following techniques in developing the engineered standards, but not limited to: time study, work sampling, predetermined time standards and actual performance measures. Measures productivity, audit standards and update standards as warranted
  • 6) Develop manufacturing methods, labor utilization standards, and cost analysis systems to promote efficient staff and facility utilization. Recommend methods for improving utilization of personnel, material, and utilities
  • 7) Supports all aspects of Lean implementation including 5-S, Value Stream Mapping, TPM, Visual Controls, Standard Operations, TAKT Flow & Pull, Setup Reduction, Standard Work, and other Lean tools
  • 8) Create and monitor capacity, cycle time and Work In Progress aging. Present trend, risk and recommend mitigation plan/improvement project to leadership and stakeholders. Maybe asked to lead some projects
  • 9) Performs other job-related duties and responsibilities as assigned by management
  • 1) Bachelor's or Master’s degree in Manufacturing, Mechanical or Industrial Engineering with minimum 3 years professional experience in the electronics, aerospace or automotive industry as a Industrial Engineer. Example of coursework includes statistics, computer skills, ergonomics, management science, quality control, sociology, psychology, organizational behavior, economics, finance, labor relations, and mathematics
  • 2) Working knowledge of method analysis and labor estimating
  • 3) Working knowledge of work station design and ergonomics
  • 4) Working knowledge of facilities layout
  • 5) Continuous improvement utilizing lean manufacturing tools
  • 6) High level of analytical and problem solving skills
  • 7) Good interpersonal skills. Ability to interface with other functions - Networking capabilities
  • 8) Good oral and written skills
  • 9) Good computer skills
216

Industrial Engineer Resume Examples & Samples

  • Analysis of work methods, manufacturing processes and non-productive materials to identify inefficiencies. Test, validate, and implement improvements which result in safer, higher quality, and/or lower cost outcomes. Monitor and assess results after implementation to ensure that the results are sustained; initiate and lead counter-measures required to address degradation in results
  • Analysis, coordination, and submission of site responses to Engineering Cost Studies (CRS, eRFQ, etc.) for new or modified product. Participate in pre- and follow up activities to communicate, substantiate, and defend site responses. Audit production results to ensure compliance with original submissions
  • Generate, communicate, and maintain site capacity plans for all operations. Develop and maintain relationships with capacity stakeholders including site Operations Staff, regional and global individuals or teams
  • Identify and participate in resolution of capacity shortfalls associated with personnel or equipment constraints
  • Participate in analysis, specification, and evaluation of new equipment to ensure that capacity expectations are identified, documented, and achieved over continuum of quoting, purchase order, prove off, and post-installation
  • Entry and maintenance of system data, including routers, work centers, bills of materials, production lines, item masters, etc. to support site operations. (Current operations database is MfgPro.)
  • Coordinate and lead site change management activities including review of CVJ Engineering Change Notices for site impact, coordination of implementation on site, communication of status and plans on-site and externally (within GKN USCVJ) as appropriate. Set, track, and ensure compliance with timing plans for accepted changes; coordinate corrective actions as necessary to address issues which are off plan
  • Participate in Value Stream Mapping and related continuous improvement initiatives. Support implementation of proposed changes in work layout, equipment, methods and non-productive materials, using appropriate statistical techniques, demonstrations and presentations as necessary
  • Developing budget work standards, machine capacity tables, staffing tables, staffing / labor requirements, and non-productive material usage standards for new model programs, etc., and revisions in production schedules
  • Perform periodic machine and labor time analyses to ensure that current demand forecasts (SIOP) are supported by available capacity. Lead / participate in corrective actions as necessary
  • Auditing work standards (time and method) for variances, implement corrective actions as necessary and appropriate
  • Four year degree in Engineering or related field with 2 - 3 years of experience
217

Industrial Engineer Resume Examples & Samples

  • Responsible for technical problem definition and solution in a manufacturing environment. Acts as liaison with design engineering on incorporating changes to designs to improve manufacturability
  • Develop tools that enable manufacturing, aid process improvement or address safety concerns. Frequent use of general/technical knowledge and industry/functional practices, techniques and standards
  • Conducts studies pertaining to cost control, cost reduction, inventory control through the application of Lean principles
  • Plans and designs facilities and layout for manufacturing processes and equipment, taking into account economic factors, process flow, operator efficiency and comfort
  • Determines proper flow and sequence of material for efficient build process
  • Excellent data anlaysis and technical problem solving skills
  • Self-directed and possess strong analytical skills
  • Background in manufacturing
  • Lean and/or Six Sigma experience
  • Good organizational skills and the ability to achieve results through good communication skills and teamwork
218

Industrial Engineer, Global Resume Examples & Samples

  • Degree in Industrial, Mechanical, or Aerospace Engineering
  • Minimum of 5 - 10 years applicable experience in a manufacturing environment, preferably in the aerospace industry
  • Knowledge and experience in using sound Industrial Engineering principles as they relate to work study, process analysis and resource planning
  • Proven ability to lead and manage projects involving cross functional teams
  • Working knowledge of labour cost accounting and estimating
  • Knowledge and experience of applying lean manufacturing techniques
  • Have strong written and communication skills
  • Advanced knowledge of Microsoft Word, Excel, Access and SAP
219

Industrial Engineer Resume Examples & Samples

  • Master data control & new part set up
  • Ensuring data cleanliness and accuracy through regular review of bills of materials, lot sizes, lot control data, planning methods, etc
  • Suggesting areas for new or improved production data capture
  • Tracking and reporting on adherence to MOQs and MOVs
  • Providing analysis to enable effective planning & production
  • Monitoring and reporting on production order variances and significant changes to material cost percentage
  • Providing analysis of customer order lead time versus market standard
  • Liaising with the Finance Team to ensure cost model accuracy based on true production data
  • Utilising continuous improvement methodologies and ideas within planning
  • Propose targeted cost reduction ideas through more efficient planning and manufacturing multiples
  • Partnering with planning, production, purchasing and product management to implement ideas to reduce material percentage cost
  • An understanding of manufacturing processes
  • Strong maths/analytical skills
  • Excellent Excel skills and experience in working with data
  • Ability to question results and critically assess data
  • Able to challenge the existing work practices
  • Knowledge of PowerBI, Tableau or equivalent would be advantageous
  • Experience with building predictive models is desirable
220

Industrial Engineer Resume Examples & Samples

  • Responsible for industrial engineering development and deployment of lean solutions for automotive electronics manufacturing
  • Works with cross functional teams to determine lean application specific production and process requirements
  • Designs lean manufacturing line layouts in CAD and presents to cross functional teams and Plant Staff
  • Conducts manufacturing time studies and simulations utilizing MOST and Yamazumi Charting Techniques
  • Leads lean manufacturing line concept and layout reviews
  • Benchmarks and shares lean manufacturing processes with the manufacturing teams
  • Drives Lean Manufacturing Initiatives through basic TPM, Kaizen and Lean methods
  • Provides lessons learned input to technical operations teams for continuous improvement
  • Supports activities for OEE, Scrap, Yield and DPMO improvement to support plant performance metrics
  • Supports Scrap reduction efforts through problem solving and process optimization
  • Advanced manufacturing line problem solving related to manufacturing process related defects
  • Supports Customer Audits and Visits through knowledge and process sharing
  • Supports TPM program by providing mentoring and training to peers, technicians and operator personnel
  • Identifies and documents projects in CBS, 8D, and 5­Why formats for review with engineering and management
  • Supports global TECH.Net program through participation and sharing of lessons learned
  • Supports Continental Technology group through Tech.Net participation and projects
  • Supports Competence Center for Manufacturing through advanced process project work
  • Minimum BS Engineering Degree
  • 1-3 yrs. of experience in industrial engineering projects
  • CAD Software ­ AutoCad / Solidworks
  • Operations/Manufacturing Simulation Tools
221

Industrial Engineer Resume Examples & Samples

  • Rationalize, optimize production facilities
  • Drive optimization of machine and personnel utilization
  • Lead lean and 6Sigma productivity improvement projects
  • Headcount demand planning based on volume forecasts
  • Calculate and forecast targets of Key Performance Indicators
  • Maintain time norm indicators, (machine and personal times)
222

Industrial Engineer Resume Examples & Samples

  • Lead or support productivity improve project through IE method to achieve lean manufacturing
  • Setup standard headcount, output per hour and product cycle Time through IE tool and method
  • Optimize the company/production line layout to improve the space efficiency
  • Investment control and coordinate the capital approved process
223

Industrial Engineer Resume Examples & Samples

  • Lead the evaluation and subsequent revision of all work methods and workflow for all functions to ensure they are ergonomically correct
  • Lead the training of management and hourly workforce on productivity and work methods
  • Lead and perform the analysis, recommendation, and implementation of enhancements to existing work methods flows and processes to increase throughput
  • Lead the efforts to develop and design Distribution Center and office area layouts
  • Lead the collection of data to assist in the development of Distribution Center and capital budgets
  • Lead the design, selection and installation of material handling equipment incorporated into existing, new and expanded distribution centers
  • Lead the research of technological advances in material handling systems to develop cost-effective improvements to operating methods and procedures to support purchase recommendations
  • Accountable for maintaining budget on all projects and ensuring the company is obtaining the most cost effective price
  • Develop daily manpower planning tool for various DC processes to better utilize labor
  • Constantly evaluate product flow, staging areas, storage space and fulfillment methods for improvement opportunities
  • Proactively monitor SKU velocity and other sales events to properly slot SKU's for efficient Fulfillment. Periodically evaluate opportunities for SKU consolidations and re-warehousing for efficient storage and Fulfillment
  • With the direction of SC support team, identify and implement distribution and storage process improvements that increase capacity, reduce cost and improve accuracy
  • Highly developed problem solving and prioritization skills that will be demonstrated by the successful and timely completion of assignments
  • Ability to drive projects and accept accountability for project progress and quality
  • Demonstrate ability to perform analyses and identify solutions to resolve specific business needs
  • Must be a self starter and work independently
  • Detail oriented with good math and statistical skills
  • Good verbal and written skills to communicate with TM's and all levels of management
  • Works with management and supervision in the evaluation and development of processes
  • Assist with resolving difficulties and in developing new methods and procedures
  • Flexible to work on various shifts as needed
  • Bilingual Team Members (particularly Spanish-speaking), may be strongly desired based upon work location
  • Strong Microsoft Word, Excel, Access, AS/400 and PeopleSoft skills, SQL
224

Industrial Engineer Workforce Management Resume Examples & Samples

  • Design processes, tools, and / or systems utilizing engineering principles to optimize performance
  • Develop process improvements using methodologies such as Six Sigma to improve productivity, effectiveness, efficiencies and customer service
  • Design, and update store characteristics, store profiles, and labor drivers
  • Identify labor demand by role based on business needs including seasonality, events, promotions, and merchandising and ensure alignment between budgets and schedules
  • Translate SOPs and routines (workload) into labor demand, and align schedules with workload within assigned budgets
  • Complete annual refresh of labor standards to ensure all business changes are properly reflected in the scheduling system and labor drivers
  • Coordinate and prioritize work activities and flow with different departments and business partners to ensure proper management of tasks
  • Analyze performance and report as needed including creating ad hoc reporting
  • Coordinate with HR, legal, and other groups to ensure compliance with government regulations and internal policies within the scheduling system including shift rules, pay rules, etc
  • Experience with the MOST predetermined time methodology
  • Good understanding of different budgeting methods including workload driven budgeting
  • Experience with workforce management tools (i.e. Red Prairie, Kronos, Infor, etc.)
  • Demonstrate strategic customer-centric approach to budgeting and scheduling in a retail environment
  • Able to translate technical concept to nontechnical audience with advanced presentation skills
  • Experience in data analysis and its translation into business insights and / or recommendations
  • Excellent communication and influence skills including the ability to communicate effectively with all stakeholders at different levels and different roles
  • Detail-oriented and comfortable with a fast-paced, structured, retail environment
  • Adaptable to change, and effective change agent
  • 2 – 5 years IE experience; preferably in a retail environment
225

Industrial Engineer Resume Examples & Samples

  • Lead and participate in the identification, prioritization, implementation, and control of cost reduction and process improvement initiatives using lean processes
  • Identify innovative approaches to company-wide store issues that create opportunities for breakthrough process improvements that positively impact the customer shopping experience, safety, product freshness and food safety
  • Provide statistical analysis reports evaluating the efficiency of current processes, procedures, equipment and associates
  • Establish work measurement programs and collect and analyze data; develop and maintain key performance indicators and metrics
  • Develop and implement direct labor standards for costing, staffing, and evaluating performance
  • Provide crucial maintenance support to the labor standards program including process and methods auditing of the stores
  • Develop scope and charter definitions for projects
  • Conduct feasibility studies of varied projects to determine the worth of an investment and provide justification for capital appropriations
  • Evaluate vendor and supplier proposals for new equipment purchases to ensure increased efficiency and evaluate the equipment’s contribution to cost saving measures
  • Serve as a liaison to Retail Operations peers, other department leaders and executive leadership
  • Provide IE support to stores lagging in attainment rates including methods and procedural issues, store profile audits, task requirements, and other areas
  • Travel to retail locations and offices to support process improvement initiatives and improve efficiencies by reducing waste of time, money, materials, energy and other resources
  • Must be able to perform the essential functions of this position with or without reasonable accommodation
  • Bachelor’s degree in industrial engineering or a closely related field
  • 2+ years progressive industrial engineer project work in a complex, integrated retail network
  • Broad background in industrial engineering technology, application and project management
  • Ability to effectively communicate and influence all levels of the organization
  • Ability to work well within project teams
  • Strong mathematical and analytical skills
  • Effective planning, negotiating, decision-making, problem-solving, and organizing skills
  • Able to utilize all work measurement tools available (i.e. MTM, MOST, Time Study, Analysis)
  • Ability to earn Lean/Six Sigma belt certification within one year
  • Ability to travel independently (up to 30%)
  • Experience in retail operations planning
  • Extensive process engineering background
  • Master’s degree in engineering, engineering management, a related field or an MBA
  • Lean/Six Sigma training/certification
226

Industrial Engineer Resume Examples & Samples

  • Analyzing and designing sequencing of operations and work flow to improve efficiencies at suppliers
  • Conducts studies pertaining to supplier production control, work flow, cost control, cost reduction, inventory control, and production record systems
  • Ability to change physical locations based upon need (including physical ability to travel to offsite suppliers for extended periods)
  • Able to work in both external and internal environmental condition
  • Demonstrated ability to analyze supplier manufacturing capability and characteristics
227

Industrial Engineer Resume Examples & Samples

  • Assisting senior business leaders in defining and documenting project management plans and charters
  • Ensures project scope and objectives are accomplished within the prescribed time frame and funding parameters
  • Analyzing project plans and schedules for discrepancies, delays, risks, etc. and for making recommendations on improvement opportunities
  • Facilitate regularly scheduled project reviews with the project sponsor and project stakeholders to provide management visibility to the status of the project
  • Providing regular communication of project status, issues and risks to key stakeholders
  • Mentoring best practice project management to project teams, business leaders, and other project personnel
  • Delivering best practice Project Management support to cross-functional projects and project teams, utilizing the procedures, methodologies and tools
  • Providing project management leadership to projects and programs
  • Assist in the supervision of warehouse departments or processes as needed
  • Assist with both internal and external compliance audits
  • Ability to develop and manage project plans, document and track project status and communicate to key stakeholders
  • Project Management background and experience in distribution and financial systems required
  • Ability to manage multiple projects in a results oriented organization
  • Experiences should include project management of solution design, customization, integration and implementation of packaged applications and/or custom applications
  • Identifying, documenting, and assigning project roles, responsibilities, and reporting relationships
  • Requesting appropriate resources from the departments
  • Identifying the required individual and team skills to enhance project performance and providing development opportunities
  • Setting formal project goals for each team member, providing ongoing feedback, and evaluating achievement against
  • Two years of experience in project management or technical functional support areas
  • Two years of work experience in logistics or distribution preferred
  • 1 - 3 years of experience in Microsoft Access, MS Visio, MS Project preferred
  • Proven track record managing complex technical or business projects
  • Proven cross-functional team success
  • Ability to deliver on-schedule and within budget
  • Successful track record of managing projects through the entire project lifecycle
  • Strong analytics background with ability to make data-driven decisions to improve results
  • Strong analytical and problem solving skills, Six Sigma or LEAN preferred
  • Excellent organizational and interpersonal skills
  • Proficient in time management
  • Excellent written and oral communication capabilities in a large organization
  • Familiarity with the equipment manufacturing process desirable (i.e. agricultural, automotive, construction, etc.)
228

Industrial Engineer Resume Examples & Samples

  • Apply industrial engineering methods to improve supply chain operations and processes
  • Lead, coordinate and execute projects intended to improve supply chain efficiencies
  • Develop and maintain critical KPIs and standard supply chain operational, process and results measurements to track performance and drive improvements
  • Manage and monitor supply chain service levels, inventory investment and cost performance across the network
  • Design and develop quantitative models to optimize supply chain performance. Assist in the testing and implementation of such models
  • Provide Analytics support for supply chain analytics and decision support projects
229

Industrial Engineer Resume Examples & Samples

  • Manage capacity planning for factory equipment (tools)
  • Provide Industrial Engineering support to cross functional teams, including cycletime analysis, strategic capital support, and productivity improvement actions
  • Identify and address potential areas for improvement and optimize tool availability, cycle time, utilization and cost
  • Participate and lead problem solving sessions using structured approach and lean methodologies
  • Communicate effectively across teams in manufacturing, production control, quality, engineering and maintenance
  • Align objectives with other GLOBALFOUNDRIES factories and seek best practices for execution
  • Ensure the overall Industrial Engineering focus is aligned with operations requirements and delivering value to the organization
  • Bachelor's Degree in Industrial Engineering or a related discipline
  • Able to travel as required (this is expected to be ~10% of the time or less)
  • Fluency in English Language – written & verbal
  • Experience with Lean methodologies and structured problem solving
  • Experience with Microsoft Excel and/or Google Sheets
  • Knowledge of Semiconductor Manufacturing
230

Plant / Industrial Engineer Resume Examples & Samples

  • 2-3 years of experience in a manufacturing environment is a plus
  • Previous experience or training in ISO, Lean, and/or Six Sigma is a plus
  • PLC experience a plus
231

Intern, Industrial Engineer Resume Examples & Samples

  • Must be actively enrolled in an undergraduate program at an accredited local University, as junior or senior working toward a Bachelor’s degree in Business, General Agriculture, Agribusiness, Industrial Engineering, Engineering, or a degree with demonstrated relevant experience to perform the job duties. 3.0 or above
  • Skills and Background: Strong capability in Microsoft Office Suite to include Power Point, Excel and Word; Access skills. Proficient in CAD, AutoCAD or other design software
  • Strong interpersonal (verbal / written) communication skills. Ability to communicate with various levels of management
  • High level of skill in decision making, problem solving and analytics. Organizational, multi-tasking and prioritization skills. Integrity, accuracy, dependability, enthusiasm and confidentiality
  • Must be authorized to work in the United States without Visa sponsorship
  • Language Requirements: Strong proficiency and sophistication in the use of English in both written and verbal formats
  • Physical Requirements: Ability to lift at least 30 pounds
232

Industrial Engineer Resume Examples & Samples

  • BS degree in Industrial Engineering, Mechanical Engineering, or equivalent area of study
  • 4 - 6 years of experience in distribution and/or manufacturing operations
  • Previous experience working on process improvements within a Manufacturing/Distribution Center environment
  • Or any equivalent combination of experience and training that demonstrates the ability to perform the key responsibilities of this position
  • Comprehensive knowledge of Six Sigma highly preferred
  • Certified Six Sigma Green Belt or higher is a plus
  • Demonstrated experience in leading project management teams preferred
  • Superior analytical skills with detail orientation
  • Performs work with a high degree of latitude
  • Handles the most complex issues
  • Possesses expert knowledge of subject matter
  • High level of organization skills with the ability to prioritize and manage multiple deadlines
  • Proficient in Microsoft Office with advanced Excel skills
233

Industrial Engineer Resume Examples & Samples

  • Increase productivity and efficiency within the warehouse. Improve service to the customers and warehouse management decision-making capability
  • Present and sell recommendations to the Manager of Industrial Engineering and potentially all levels of management
  • Develop and maintain labor standards for designated job functions within the distribution center. Ensures facility efficiency and workplace safety
  • Interacts with hourly distribution/TFE employees to determine best methods and will also serve as an agent for change within the warehouse
  • Analyze complex processes and recommend positive change while interacting with all levels of management
  • Project management skills recommended with the strong ability to influence others and work independently
  • Performing other special projects or assignments for the Manager of Industrial Engineer
  • Candidate should have a degree in Industrial Engineering or closely related field with 3 or more years of experience in a distribution center environment
234

Industrial Engineer Resume Examples & Samples

  • High level of analytical ability where the problems are complex and difficult
  • Proficient in data analysis and Microsoft Office applications (e.g. Excel)
  • Experience in technical problem-solving
  • Ability to manage multiple assignments with a high level of autonomy and accountability for results
  • Demonstrated initiative to reach beyond assigned work to improve output
235

Industrial Engineer Resume Examples & Samples

  • Bachelor or Science in Engineering or related with 4+ years related experience
  • Previous Time Study or Work Measurement Standards development experience
  • Excellent interpersonal skills, with emphasis on team work
  • Ability to understand, communicate, and create technical manufacturing documentation
  • Strong analytical, research, and related skills
  • Solid project & time management skills
  • Knowledge of jewelry manufacturing techniques and precious metallurgy
  • Working knowledge of JD Edwards System or other enterprise systems
  • CAD knowledge (Autocad, Rhino, Solidworks, other)
236

Industrial Engineer Resume Examples & Samples

  • Work with a collaborative team that develops industry leading Industrial Engineering methods both locally and globally
  • Optimize layouts for new equipment, transferred equipment, and process changes then coordinate with the Facilities team for installation or decommission while following all site and safety requirements
  • Build planning for both short- and long-term Pilot Line schedules
  • Capital planning and purchase justification to support schedule changes and development requirements
  • Lean manufacturing, Six Sigma or Business Excellence applications to continuously improve factory flow, improve cycle time, and reduce bottleneck issues
  • Static and dynamic modeling. This includes utilizing capacity modeling, queuing theory, simulation and optimization models to improve factory performance
237

Industrial Engineer Resume Examples & Samples

  • High level of analytical ability where the problems are unusual and difficult
  • Advanced knowledge of work measurement techniques
  • Extensive lean manufacturing knowledge/experience
238

Industrial Engineer Resume Examples & Samples

  • BS degree in Industrial Engineering, or related degree
  • Microsoft Excel
  • CNC/Machining Knowledge a plus
  • Lean Manufacturing/Six Sigma
239

Senior Quality / Industrial Engineer Resume Examples & Samples

  • Quality engineering - SPC, MSA/Gage R&R, PFMEA, RCCA/8D problem solving
  • Lean manufacturing
  • Statistical methods - well versed in stats software such as Minitab or JMP
  • Excellent presentation development and delivery skills
240

Industrial Engineer Resume Examples & Samples

  • Basic air-conditioning knowledge
  • Production management skills
  • Basic understanding of ISO Quality System
  • Basic ERP system
  • Process improvement
  • PC skills – Basic Windows Excel, Words, Powerpoint
  • E-mail – create, send and retrieve messages
241

Domestic New Product Industrial Engineer Resume Examples & Samples

  • Provide leadership to costing and process validation team within the New Product Development team
  • Work to build organizational capability, including teaching and coaching, standard setting, role modeling and building capability to deliver best-in-class results
  • Manage and organize IE-related tasks for factory IEs for new initiatives/projects and other technical projects
  • Lead the improvement of IE-related new product work processes through the establishment of internal metrics and identification of opportunities (to include but not limited to: costing process, material specification management, etc.)
  • Assist in the development of sequence of operations, job instructions and lay-outs for new styles
  • Recommend production methods and processes required to meet design objective on new styles and processes
  • Assist in the development of standardized work and job instructions for ongoing operations
  • Evaluate and develop labor standards for all operations
  • Provide engineering support to daily operations
  • Interface with Developers, Pattern Engineers and Factory teams to assist in the introduction of new products for Samples, Extremes and Pilots
  • Make recommendations on material specification changes in order to achieve cost savings
  • You will analyze the product costing process
  • Using your strong negotiation skills, you will agree upon timelines and final costs for finished shoes
  • Own costing process for Totally New and drive cross-functional collaboration to drive toward target costs over the development cycle
  • Provide pre-costing for each new product introduction to assure cost targets are achievable
  • B.S. degree in a related field or equivalent experience
  • Experience in managing shopfloor and technical resources
  • Conversant with MS office
  • Excellent communication skills and a willingness to work in a team environment is essential
  • Direct manufacturing experience required
  • Lean Manufacturing experience required
  • Shoe industry experience preferred
242

Industrial Engineer Resume Examples & Samples

  • Bachelor's degree (BA/BS) in Industrial Engineering
  • The ideal candidate will have 3 years or more experience in a distribution center environment. This experience should include materials distribution, industrial supply and e-commerce order fulfillment
  • Experience mapping distribution center flows in conjunction with establishing engineered labor standards
  • Proficiency using Auto-Cad
  • Knowledge and experience working with SAP WMS is a Plus
  • Certified in Accenture/Maynard MOST Labor Standards and Methods a PLUS
  • Ability to apply mathematical operations to such tasks as frequency distribution, test reliability and validation, analysis of variance, correlation techniques, sampling theory and factor analysis
243

Industrial Engineer Resume Examples & Samples

  • Analysis & Reporting: Develops standard monthly financial/productivity analysis to show trends at the site and network level. Analyzes WTD/MTD/YTD DC and Transportation performance to understand trends and develop action plans to address negative trends and understand positive trends. Develops analysis and reporting tools that enable before/after analysis of process changes in distribution. Provide DC teams with standard performance reporting package to facilitate gap analysis review / action planning process. Provide ongoing reporting relative to progress on key 5 year business initiatives. Provide ad hoc performance analysis as dictated by business need
  • Project Management Leadership/Business Process Design: Projects to include system upgrades, new system design, capital fixture projects, company and overall structure changes. Works across sites to determine operational best practices and implement for consistency. Identifies key cost drivers and develops/leads the action plans to improve network efficiency. Provides leadership of action plans to test operational changes. Determines plans, communicates plans/actions, measures results, communicates results and recommends solutions
  • Liaison: Works across the organization and leads high profile projects for logistics, which may include managing/directing the work product from other departments. Works cross functionally with DC eCommerce operations to ensure efficient system wide processes. Drives initiatives identified by site leadership with key corporate stakeholders
  • Manages 3rd party relationships with service providers to make improvements in safety, service, quality and cost
  • Bachelors Degree Required, preferably in Industrial Engineering, Supply Chain or Logistics
  • 5-10 years of experience with a focus on supply chain
  • Proficient in MS Office including Excel and Access as well as SQL databases required; ability to read/write macros
  • Knowledge or experience of material handling or installations and distribution center design and construction experience
244

Industrial Engineer Resume Examples & Samples

  • Create and maintain routing and bills of materials for new design by working from drawings and standard operation sequencing
  • Creating bills of material and routings for deviations from standard routings
  • Creating bills of material and routings for rework or reconfiguring products
  • Analysis data and correct routings changes for external operations or proposed changes from internal to external operations
  • Participate as a member of the Material Review Board to estimate production costs and effect of product design changes for management review
245

Industrial Engineer Resume Examples & Samples

  • Data collection, validation, and analysis
  • Development and presentation of project and process improvement proposals
  • Documentation of project scope and objectives through the Project Charter
  • Identify project costs through vendor quote process
  • Work with Finance on financial justification and capital/expense budgeting
  • Vetting and selection of vendors and equipment
  • Develop and manage project schedules, utilizing MS Project to track activities, owners, and progress
  • Manage vendors and outside contractors; ensure compliance with all safety requirements
  • Work closely with internal Maintenance, Technology Services, and HR groups as required
  • Provide clear and consistent communication throughout the project life-cycle
  • Ensure effective change management through training programs and documentation of work instructions
  • Monitor and maintain engineered standards in area
  • Bachelor of Science Degree in Industrial or Mechanical Engineering, or related technical discipline
  • Experience presenting to Sr. Management
  • Proven ability to manage multiple projects and assignments simultaneously
  • Demonstrates strong analytical, problem solving, and project management skills
  • Willingness to travel up to 25% of the time
  • Proficient in Microsoft Office and Project
  • Experience leading project teams and managing contractors and outside vendors
246

Industrial Engineer Resume Examples & Samples

  • Conducting various analyses and providing thought leadership to identify new ideas that lead to improved efficiency and customer experience in our Inbound Contact Center
  • Query and analyze large sets of data to draw conclusions and make recommendations to the business using statistical and data mining techniques combined with business and operational knowledge
  • Application of Industrial Engineering techniques including Simulation Modeling, Operations Research, and Time and Motion Studies to provide insights and recommendations
  • Support the business with process mapping, identification of process improvements opportunities, feasibility studies, demand management efforts, and defect eliminations for the purposes of generating cost-savings and improving customer satisfaction
  • Work closely with Operations leaders and Project Managers to further develop existing ideas, prioritize them, and implement them
  • Develop cost-benefit analyses and prepare business presentations to share with leadership and gain buy-in
  • Working knowledge of Microsoft SQL, Big Data, Excel, Access, Visio, and Minitab or R strongly preferred
  • Bachelors in Industrial Engineering and/or Applied Operations Research required, Master’s degree a plus
  • A creative and innovative professional with strong engineering background
  • Self-starter and naturally curious about finding transformational and customer experience improvement opportunities
  • Critical skills include proficiency with Industrial Engineering tools and techniques, strategic thought leadership and execution skills, strong negotiation skills, data analysis and data mining skills to generate rich insights
  • Excellent written/verbal communication skills and the ability to thrive in a dynamic and fast-paced environment are required
  • Proficiency in statistics, data mining, queuing theory, predictive modeling, simulation, and operations research strongly preferred
247

TMG SP Industrial Engineer Resume Examples & Samples

  • Constructive confrontational skills and a willingness to challenge others constructively
  • Candidate must possess an Industrial Engineering degree
  • Strong organizational, prioritization, planning and time management skills
  • Ability to effectively communicate ideas using written and verbal means at all levels of management and across diverse functional teams manufacturing, finance, construction, install while being able to apply active listening skills to deliver consistent results
  • Ability to summarize significant information to concise executive summaries and recommendations presentation skills
  • Strong project management and negotiation skills in order to negotiate key deliverables or support between multiple organizations
  • Ability to work in an ever changing environment and performing within a team / culture which includes: tolerance of ambiguity, setting expectations, driving accountability, possesses excellent teamwork, demonstrated leadership and team oriented
248

Industrial Engineer Resume Examples & Samples

  • Discover opportunities for waste reduction and capacity improvement and proactively drive solutions with and without capital investment
  • Act as liaison between Finance, Engineering, Facilities, and Materials/Supply Chain and to develop business case rationale for engineering projects and to coordinate MOC (Management of Change) process for the department
  • Facilitate kaizen events targeting key improvements to drive productivity, data management/collection, and paperwork handling improvements
  • Develop and implement systems and improvement strategies for direct material flow (in plant transport, inventory staging/access, and assembly line supply)
  • Evaluate process improvements for operations (labor balancing, time studies, line setup, error proofing, assembly methods, etc.) to minimize downtime and rework
  • Provide financial analysis for Make/Buy decisions in support of continuous improvement projects
  • Review product documentation for accuracy and completeness (BOMs, Routers, Work Instructions, Assembly Drawings, Packaging Instructions, Component Drawings, Inspection Process Sheets, etc.)
  • Create and manage production routers and MRB related rework processes
  • Assist with annual budget preparation
  • 3 years of related experience required
249

Industrial Engineer Resume Examples & Samples

  • University degree in technical field
  • Experienced in technology of electronic, mechanical assembly manufacturing
  • Knowledge and experience with production equipments, Knowledge of drawing documentation
250

Industrial Engineer Resume Examples & Samples

  • Lead efforts to improve existing manufacturing processes with the outcome of improved quality, cost reduction and increase productivity
  • Participate in safety incident reviews and drive improvement in regards to ergonomic concerns
  • Incorporate Lean principles into process improvement and implementation of new technology
  • Develop standard work, control plans and inspection methods for new and existing products
  • Work cross-functionally with various teams to meet organizational objectives
  • Support company policies and procedures, goals and objectives, environmental safety and health regulations and manufacturing practices in providing a safe work environment
  • Bachelor degree in Industrial Engineering, with analytics emphasis or related field
  • 3-5 years of engineering experience in a manufacturing facility or relevant experience
  • Toolbox which includes time study, plant layout, manpower calculations, line balancing skill set
  • Proven project driven results
  • Lean manufacturing experience along with Business analytics preferred
  • Written and Verbal communication including technical writing skills
  • Understanding systems Engineering concepts
  • Ability to conduct cost/benefit analysis