Engineer, Controls Resume Samples
4.8
(81 votes) for
Engineer, Controls Resume Samples
The Guide To Resume Tailoring
Guide the recruiter to the conclusion that you are the best candidate for the engineer, controls job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.
Craft your perfect resume by picking job responsibilities written by professional recruiters
Pick from the thousands of curated job responsibilities used by the leading companies
Tailor your resume & cover letter with wording that best fits for each job you apply
Resume Builder
Create a Resume in Minutes with Professional Resume Templates
CHOOSE THE BEST TEMPLATE
- Choose from 15 Leading Templates. No need to think about design details.
USE PRE-WRITTEN BULLET POINTS
- Select from thousands of pre-written bullet points.
SAVE YOUR DOCUMENTS IN PDF FILES
- Instantly download in PDF format or share a custom link.
LO
L Orn
Lafayette
Orn
52032 Theron Mount
Detroit
MI
+1 (555) 546 6265
52032 Theron Mount
Detroit
MI
Phone
p
+1 (555) 546 6265
Experience
Experience
Los Angeles, CA
Controls Project Engineer
Los Angeles, CA
Stanton LLC
Los Angeles, CA
Controls Project Engineer
- Provides controls feasibility and equipment cost estimates to automation development team
- Works with mechanical engineering department to determine design complete dates. Prioritizes work to fulfill deadlines
- Attends Design Reviews and PFMEA’s while working with mechanical engineers to improve current and future designs of automation
- Work with established programming standards for PLC and automated systems
- Applies advanced knowledge of engineering principles and practices
- Plan and manage supplier and equipment buyoffs
- HMI programming and system development
Houston, TX
Engineer Controls Detroit
Houston, TX
Lubowitz, Adams and Schmeler
Houston, TX
Engineer Controls Detroit
- Work independently and take ownership while working in a team environment
- Performs preventative maintenance procedures following an established program
- Motivated to continuous improvement in the process to maintain optimum operation conditions and plant productivity
- Performs other duties incidental to the position, as assigned
- Maintain safe work environment and follow all safety standards
- Cleans immediate work areas
- Review work orders and receives verbal instructions on job assignments
present
San Francisco, CA
Power Electronics Controls Engineer
San Francisco, CA
Schoen, Ratke and Cremin
present
San Francisco, CA
Power Electronics Controls Engineer
present
- Develop and execute system and subsystem validation test plans
- Translate algorithms into software implementation, and work with the firmware team to integrate that into the firmware framework
- Develop dynamic models of the system, and tune controller algorithms accordingly to optimize performance
- Develop subsystem models to support concept validation studies and DFSS activities
- Implement product design using Object Oriented Programming techniques in C/C++ integrated development environment
- Develop new products using simulation, modeling and statistical design methods
- Participate in writing product documentation, technical reports, developing software cost and schedule estimates, and authoring software development and test plans
Education
Education
Bachelor’s Degree in Engineering
Bachelor’s Degree in Engineering
University of Massachusetts Amherst
Bachelor’s Degree in Engineering
Skills
Skills
- Proficient with PC desktop applications (MS Office)
- Ability to integrate components via serial interfaces and Ethernet interfaces
- Basic mechanical skills
- Debugging and problem resolution skills
- Understanding of control devices
- Understanding of motor control
- Ladder Logic Programming
- VFD operational understanding
- Understanding of electrical principles
- Equivalent combination of education and experience
15 Engineer, Controls resume templates
Read our complete resume writing guides
1
Powertrain Controls Engineer Resume Examples & Samples
- Develop powertrain system plant models and HIL/SIL/MIL validation infrastructure to support vehicle program plans and quality objectives
- Design and validate control algorithms (C-code and/or model based) to meet customer, regulatory, and functional safety requirements (ISO 26262)
- Define Control System hardware architecture assumptions and
2
Powertrain Controls Obd Subsystem Engineer Resume Examples & Samples
- Developing control system specifications to meet regulatory requirements,
- Working in a hands-on environment to design and validate that diagnostic system hardware and software meet requirements
- Author calibration guidelines,
- Support subsystem feature team meetings to present new concepts and resolve issues
3
Controls Engineer, Body Resume Examples & Samples
- Responsibility for designing/selecting welding systems, running simulations, implementation, commissioning and programming of automation equipment
- Responsible for continuous process optimization
- Project management: both internal maintenance projects, and major contractor projects
- Spare Parts: set up and maintain appropriate spare parts & consumables inventories
- Utilities usage reporting and energy savings implementations
- BS in electrical engineering or equivalent experience
- 5+ years of process monitoring and optimization experience
- Advanced PLC programming knowledge on Rockwell, Siemens or equivalent PLCs
- HMI programming experience – AB Factory talk, Wonderware or equivalent
- Robotic programming skills
- Proficient in Microsoft Office suite of programs
- Proficient in CAD (CATIA is a plus)
4
Robotics / Controls Engineer Resume Examples & Samples
- A minimum of an Associates degree plus 5 years of industrial electronics experience in an automated manufacturing environment OR a Bachelors degree plus 3 years of industrial electronics experience in an automated manufacturing environment required
- A minimum of 3 years of experience troubleshooting and programming PLC code as well as replacing hardware related to it required
- Work experience with Allen Bradley or Red Lion highly preferred
- Work experience with Fanuc robots preferred
- Work experience with Ladder Logic preferred
5
Instrumentations & Controls Engineer Resume Examples & Samples
- Supports and drives initiatives to improve Facilities Systems efficiency improvements
- Safe system operation, authorizes non-routine work (Site Incident Prevention Program, SIPP; etc.) being performed in I&C Systems. Performs operational risk assessment and defines risk mitigation plans to ensure flawless changes implementations
- Owns any small projects which will be necessary to cover any capacity issues, safety concerns or energy savings measures. Owns driving these projects and ensuring that the designs and equipment specifications meet the Intel Standards
- Drives cost & energy effectiveness. Supports budget owners by forecasting spends & analyzing vs. actuals
- Supports projects, factory task forces, cross-site teams, cross-discipline teams, Module Teams, Facility Process Transfer, incident resolution
- Provide design input/reviews, construction and commissioning of new facility systems, including configuration, programming, documentation and integration to existing control systems
- Design, review and update standards for sequence of operations and sequence of procedure for facility systems
- Must possess a Bachelor's degree in Control Automation/Mechatronics Engineering or equivalent and have knowledge in the fundamentals of Instrumentation and Controls Systems
- Preferred with knowledge in Allen-Bradley PLC systems, especially SLC and Control Logix hardware & RSLogix500/ RSLogix5000 software
- Knowledge in Human Machine Interface (HMI) software of GE Cimplicity is a plus
- ISA Certifications and Knowledge of standard industry communication protocols including Ethernet, OPC, Data Highway Plus, Serial is a plus
- Must be familiar with industry standard instrumentation devices, including Pressure, Temperature, Humidity, Flow, Level and Ultrapure/Waste Water Analytical Measurement Devices & Control Valves
- Knowledge of standard industrial Mechanical, Electrical and Process (MEP) systems to be able to interact, plan and coordinate the activities of MEP engineers and technicians in support of troubleshooting and/or integrating control changes to their system in order to achieve the required results
- A good understanding of facility systems, automation, quality systems and statistical analysis
- Excellent analytical aptitude for engineering problem solving and innovative design engineering
- Complete fluency in oral and written English is required
- Is passionate about service excellence and has a proven track record in providing innovative and cost efficient solutions that ensures a world class working environment
- Proven ability to operate effectively in and is seen as a "change agent" to facilitate and manage a changing environment
6
Mbd Controls Engineer Resume Examples & Samples
- Work with product development teams across UTC BIS business unit to design and develop feedback control algorithms under the direction of the BIS controls Fellows
- Establish and develop relationships with key technology partners (including the UTC Research Center and outside suppliers) as needed to accomplish project objectives
- Facilitate timely resolution of technical issues through participation in weekly project team meetings, action items tracking, progress reports, management presentations and disciplined project phase gate reviews
7
Brake Controls Engineer Resume Examples & Samples
- BS or Higher in Mechanical, Electrical, Systems, or Controls Engineering
- 2 plus years’ design or development experience in chassis or powertrain controls
- Experience with FMEA and related quality assurance processes
- Familiarity with digital and analog data acquisition systems
- Awareness of, or experience with ISO 26262
- Experience with complex system analysis tools & methods
- Experience with HIL simulation and testing
8
Steering Controls Engineer Resume Examples & Samples
- BS or Higher in Electrical, Mechanical Engineering/Control Systems/Systems Engineering/Physics or Aerospace Engineering
- Experience in embedded control design/development
- Interest and aptitude in Vehicle Dynamics, Brake Controls, Steering controls, Suspension, Vehicle Development/Testing
- Matlab / Simulink /TargetLink/Autocode Generation/ MBD
- Knowledge of FMEA analysis, ISO 26262 and CMMI training / experience
9
Controls Engineer rd Shift Resume Examples & Samples
- Evaluate and make recommendation on equipment updates
- Troubleshoot programming failures and makes adjustments as necessary
- Evaluates and makes recommendations on new equipment
- Sets up new programs, PLC ladder logic, robot interfacing and documentation
- Follows and supports LMV Automotive Systems’s and Magna’s operating principles, including
- Two or four year degree in mechanical engineering or related field and/or 4 years job related experience
10
Controls Development Engineer Resume Examples & Samples
- Concept, develop and validate machine controls for Cat machine products
- Analyze machine performance data against requirements and operator input
- Conduct machine testing and tuning to validate requirements
- Support issue resolution activities
- Support and participate in the gateway reviews, and requirement documentation
- Support and participate in validation activities with Cat Electronics and machine business unit
- Represent IPS in all program related forums,
- Timely communication of results to customers, management and other process partners
- Bachelor’s degree in an accredited Engineering program
- Fundamental understanding of machine power and powertrain systems
- 2 years’ experience in developing controls using MATLAB/Simulink
- Ability and willingness to perform on-machine testing/tuning activities at proving grounds
- 2 years experience validating system controls and knowledge of calibration tools
- Experience with software development process using ClearCase version control
- Experience with Caterpillar tools, DATK, CadetWIN, Cat ET etc
- Experience developing and validating machine performance
- Cat machine application knowledge
11
Transmission Diagnostics & Failure Management Controls Engineer Resume Examples & Samples
- Develop, capture, and maintain requirements for next generation transmission technologies
- Create and/or maintain control feature documentation and calibration crib sheets/guides
- Design control system to meet functional, regulatory, safety, and functional safety (ISO 26262) requirements
- Implement control system design in a model based environment and/or C scripting language
- Conduct detailed validation simulations and testing of control system models and generated code
- Lead control system implementation planning to meet functional, cost, quality, and timing objectives
- Troubleshoot vehicle/powertrain functional issues; determine and validate corrective actions and preventative measures
- Bachelors of Science Degree in Computer, Computer Science, Electrical, or Mechanical Engineering
- Working knowledge in Matlab/Simulink/Stateflow
- Working knowledge of modeling, simulation and testing techniques
- Understanding of basic principles of controls engineering
- Possess strong written and oral communication skills
- Master of Science Degree in Electrical, Mechanical, Computer,or Computer Science Engineering
- Proficient in Matlab/Simulink/Stateflow
- Working knowledge of vehicle dynamics principles
- Classical, modern, and digital control theory coursework and experience with analysis of control systems
12
Hvacr Controls Engineer Resume Examples & Samples
- Control system modeling and simulation
- Creation of breadboard systems for concept demonstrations
- Development and optimization of control algorithms for integration of mechanical and electrical systems
- Specification of control system hardware and electrical components to support system demonstration testing
- Development and integration of system diagnostics into control architecture
13
System Controls Engineer Resume Examples & Samples
- PhD in Electrical Engineering with a focus on power electronics controls development, or Masters in Electrical Engineering with a focus on power electronics controls development and 3-5 years relevant industry experience, or Bachelor’s degree in Electrical Engineering with focus on power electronics controls development and 7-10 years relevant industry experience
- Advanced skills in embedded system controls
- Experience with lab instrumentation and testing procedures
- Familiarity with real-time digital simulator for test and development of power electronics controls
- Ability to use industry analysis tools such as PowerFactory, SKM, Aspen, or others
14
Regenerative Brake Systems Controls & D&R Engineer Resume Examples & Samples
- Provide definition of control systems and specification of components
- Conduct analyses and trade-off studies for component and system design features
- Author and lead team development of engineering controls documents, specifications, DFMEA, Validation/test plans, etc
- Master's in Engineering - Mechanical or Electrical
15
Steering System Controls Engineer Resume Examples & Samples
- BS or higher in Electrical/Mechanical/Aeronautics Engineering
- 2+ years of controls system and state machine development experience or advanced degree with focus on same
- 2+ years of software development experience including development of “C” code applications or advanced degree with focus on same
- 2+ years’ demonstrated proficiency with MATLAB, Simulink and Stateflow
- MS in Electrical/Aerospace/Mechanical Engineering
- 2 years’ experience in Engineering role for Chassis systems (Steering, Brakes, Suspension)
- 2 years of controls system and state machine development experience
- Demonstrated proficiency in using Vector CANAPE and dSPACE TargetLink
- Experience with Software Configuration Management Systems (e.g. ClearCase)
- Experience with Software Standards (e.g. MISRA-C)
- Experience developing and executing component test plans
- Experience using Polyspace to execute Static Code Verification Testing and Analysis
- Experience applying engineering disciplines for failure mode avoidance
- Experience using MATLAB and Simulink Stateflow
- Experience developing software requirements
- Strong leadership skills, passion for quality, passion to improve customer satisfaction
16
Brake Controls Engineer Resume Examples & Samples
- Design and release brake control modules, sensors, and brackets -- fully own all deliverables associated with your systems
- Guide supplier partners through the Ford Global Product Development System (GPDS) process
- Perform Failure Mode Avoidance and Functional Safety analyses to examine potential failure modes and design suitable prevention strategies
- Establish requirements for advanced brake control systems and emerging new technologies
- Work with other functional areas within Ford (Electrical, Powertrain, and Vehicle Program teams) to ensure that all vehicle interfaces are defined and supported
- Conduct vehicle testing, rig testing, and Hardware-In-the-Loop simulations to demonstrate system functionality
- Negotiate system costs and prepare business cases for Vehicle Programs
- BS in Mechanical Engineering, Electrical Engineering, Systems Engineering, or Controls
- 2+ years design or development experience in chassis or powertrain controls
- MS in Mechanical Engineering, Electrical Engineering, Systems Engineering, or Controls
- Familiarity with vehicle network communication (CAN)
- Self-starter who can learn to use new tools and find solutions – ability to troubleshoot & fix vehicle problems
- Experience in supplier management and cost negotiation
- Motivation to bring new technologies from concept to production in a short time period
- Experience with controls modeling (e.g. in MATLAB/Simulink)
17
Controls Project Engineer Resume Examples & Samples
- Work with established programming standards for PLC and automated systems
- Generate, develop electrical drawings. Buyoff on electrical drawings from contractors
- Ensure proper stakeholder management, communications, and escalation for all facets of various scale projects
18
Transmission Diagnostics & Failure Management Controls Engineer Resume Examples & Samples
- Bachelors of Science Degree in Electrical, or Mechanical Engineering
- 1+ years of experience in MatLab/Simulink/Stateflow
- Master of Science Degree in Electrical, Mechanical
- 1+ years of working knowledge of modeling, simulation and testing techniques
- Proficient in MatLab/Simulink/Stateflow
19
Controls Engineer, Gigafactory Resume Examples & Samples
- Lead and assist production in all equipment and controls related topics and issues
- Responsible for continuous process optimization of automated lines
- Develop maintenance controls training program and perform the training
- Develop and maintain programming standards for PLC and automated systems
- Responsibility for backing up and maintaining all equipment programs
- Lead person for all projects and installations with regard to control systems for production equipment
- Support and assist maintenance team in troubleshooting difficult breakdowns and chronic equipment failures
- Act as liaison to IT department for MES (Manufacturing Execution System) development and implementation. (product information tracking)
- Oversee maintenance, electrical and PLC projects, verify proper documentation
- Participate in supplier and equipment buyoffs
20
Steering Feature Controls Engineer Resume Examples & Samples
- Conduct Feature testing and complete Design Verification Reports
- Develop In-house Feature Control Algorithms via Matlab and Simulink Models
- Work closely with Ford engineers and Tier-1 distributed feature suppliers to develop feature interface requirements
- Develop feature simulation and bench testing
- BS in Electrical/Aerospace/Mechanical/Computer Science
- 2+ years of controls system development experience or advanced degree with focus on same
- 1+ years of project management experience with a large team to include academic projects
- MS in Electrical/Aerospace/Mechanical/Computer Science
- 2+ years of Matlab/Simulink, software development experience or advanced degree with focus on same
- 2+ years of controls system and state machine development experience
- Demonstrated proficiency in using CANAPE
- Ability to manage/resolve urgent launch concerns
- Familiarity with ISO-26262
- Demonstrated proficiency developing software requirements
21
Entry Level Powertrain Controls Engineer Resume Examples & Samples
- Capture requirements for engine function, attribute delivery, serviceability, and regulatory compliance and document in appropriate requirements repository
- Perform robustness analysis of systems and incorporate findings into control system design
- Implement control system designs based on functional and technical safety requirements
- Create and execute the validation plan using simulation, hardware-in-the-loop and vehicle resources. Collaborate with representatives from hardware and calibration activities to manage the design and development of engine control software
- Troubleshoot powertrain system functional and diagnostic issues; determine / validate corrective actions and preventive measures
- Follow change control processes to bring issues to resolution
- Release control software to programs
- Bachelor of Science Degree in Electrical Engineering or Mechanical Engineering
- 3 + years of experience developing real-time embedded control systems
- 1+ years of experience in Matlab/Simulink/Stateflow or C coding language
- Working knowledge of product development system engineering principles
- Working knowledge of combustion engine operating principles
- Working knowledge of controls engineering, including advanced software coding skills
- Working knowledge of modeling, simulation, and testing techniques
- Proactive attitude, leadership and interpersonal skills, work planning and data analysis skills
22
Steering Controls Feature Engineer Resume Examples & Samples
- Lead Program application for steering features
- Review and validate Simulink and Stateflow Model
- Develop In-house Feature Specifications and Design Verification Plans
- Work closely with Ford engineers and Tier-1 suppliers to develop and validate feature interface requirements between the ECU’s utilized by the distributed feature
- Develop Software Validation Tools using CANape and Matlab/Simulink
- Work closely with EPAS System Engineers to resolve in-house feature issues
- BS in Electrical/Aerospace/Mechanical Engineering or Computer Science
- 2+ years of controls system development experience or Masters Degree with focus on same
- 1+ years of project management experience to include academic projects
- 2+ years of experience in Engineering role for Chassis systems (Steering, Brakes, Suspension)
- Demonstrated ability to apply engineering disciplines for failure mode avoidance
- Familiarity with programming in “C” code
- Good communications and project management skills
23
Industrial Controls Standards Engineer Resume Examples & Samples
- 5+ years of experience programming Allen Bradley PLC5's, PanelView HMI's and ControlLogix
- 5+ years’ Industrial Ethernet communications experience
- 5+ years of experience with AutoCAD
- Bachelor’s Degree in Electrical Engineering or Computer Science
- Experience with Rockwell Factory Talk Production Center (FTPC)
- Working knowledge of OLDI eATM Module
- Experience with SmartEye vehicle identification technology
- Familiar with SICK barcode scanners
- Proficient with Microsoft Office suite
- Previous experience writing documentation and training materials
24
Brake Controls Development Engineer Resume Examples & Samples
- Development and calibration of Brake Control Features (i.e., Stability control)
- Develop calibrations for in-house software features, and work closely with suppliers to develop calibrations for black box features
- Work with algorithm engineers for new feature integration
- Interface with program teams to provide Brake Controls Development plans and prototype requirements
- Oversee prototype vehicle preparation with safety equipment and instrumentation
- Manage logistics at test sites: Vehicle shipping, support trailers, office space, test trip plans, on road vehicle drives in mountainous areas, etc
- 3+ months of experience in the automotive industry
- CAN / Network Communication
- Experience in algorithm/feedback controls development
- Ability to understand source code for embedded applications
- Good communications
- Limit handling certification
- Experience with digital & analog data acquisition systems
- Ability to travel during winter months
- General understanding of overall vehicle mechanical/electrical function
- Basic Vehicle Dynamics
25
Steering System Controls Engineer Resume Examples & Samples
- Develop steering control algorithms using MATLAB and Simulink Models
- Innovate new Chassis control or Driver Assistance features
- BS in Electrical/Mechanical/Aeronautics Engineering or Computer Science
- 2+ years control system development experience or BS degree
- 2+ years of software development experience including development of “C” code applications or BS degree
- MS in Electrical/Aerospace/Mechanical Engineering or Computer Science
- Familiarity with Vector CANAPE and dSPACE Controls Desk, TargetLink
- Experience developing and executing test plans
26
Suspension Controls Development Engineer Resume Examples & Samples
- Creation, evolution, and development of Suspension Control features (building upon existing Suspension control systems, or creating new ones)
- Integrate new functions with existing/emerging sensing/information technology
- Develop simulations, Perform Model/Software/Hardware in the Loop testing, and Conduct vehicle tests
- Analyze hardware and software designs for potential failure modes
- Troubleshoot, diagnose, and drive resolution of reported problems and malfunctions
- Continue learning through in-house and possible university continuing education
- Bachelor of Science in Mechanical or Aerospace Engineering
- 3+ months of experience in the automotive engineering industry
- 3+ years of experience designing control systems and or vehicle development
- Experience with Targetlink, ADAMS, Matlab, Simulink, vehicle Ride/Handling
- Excellent communications skills
- Automotive enthusiast
27
Conveyor & Controls Engineer Resume Examples & Samples
- Control system design in support of conveying applications where specific features of conveyor equipment are enhanced (enabled) by electronic controls
- Specify Requirements to manufacturers on the best, cost-efficient technology platforms related to Mechanical/Electrical Controls and Systems
- Develop novel, cost efficient and robust approaches to Material handling as Vehicle Production requirements evolve
- Write, implement, document and debug software for equipment
- Budgeting, estimating and pricing of control systems
- Procurement of electrical and control components for control systems
- Value engineering of design, components and materials
- Manage and direct on-site (in-plant) installation and commissioning of control systems in conjunction with equipment installations
- Provide remote and on-site (in-plant) troubleshooting of control systems
- Successfully complete assigned projects to quality standards, on time, and within budget
- Prepare “As-built” drawings, controls schematics and bill of materials
- Master’s Degree in Mechanical/Electrical Engineering or related program
- Expericence with PLC Control System
- Experience with Electro-Mechanical Systems – Servomotors and Servomotor Applications
28
Transmission & Driveline Controls Engineer Resume Examples & Samples
- Translate powertrain and vehicle requirements into control system designs to achieve GTDS project targets
- Design and validate control algorithms (Model Based Design and C-code) to meet functional, regulatory, safety requirements, and functional safety requirements (ISO 26262)
- Develop & apply powertrain control system validation test methods, tools, and processes to ensure system functionality and robustness
- Assist the development of driveline control system s/w design verification methods for the subsystem-level requirements
- Assist with control system project planning and program management to meet functional, cost, quality, and timing objectives
- 1+ years’ experience with control system development and validation against functional attributes. (experience may include course work)
- 1+ years’ experience with s/w development and simulation tools (C, Clearcase, Unix, Matlab, MBD) (experience may include course work)
- 1+ years’ experience with data analysis tools and methods
- Experience in automotive control systems engineering
- Experience with driveline and/or automatic transmission technologies
- Working knowledge and past experience with: driveline and/or automatic transmission system technologies control system development and validation against functional attributes
- Working knowledge of control system software modeling and simulation product development system engineering principles Reliability and Robustness methods failure analysis techniques such as FMEA
- Understanding basic principles of controls engineering
29
Motor Controls Engineer Resume Examples & Samples
- Help define requirements for motor control software and interfacing hardware components including voltage and current sensors, power stages, speed sensors
- Understand, drive design of, and implement motor controller functionality, behaviors, and algorithms
- Develop, test, and validate motor control algorithms in the laboratory and in-vehicle
- Maintain awareness of and influence research and development in key component technologies that influence future inverter / motor designs and motor control
- Advance Tesla Motors intellectual property in electric motor design and motor controls
30
Power Electronics Controls Engineer Resume Examples & Samples
- Outline controller requirements based on system performance requirements
- Evaluate new topologies for controllability and fit to system needs
- Specify microcontroller requirements and drive part selection
- Develop controls strategy, and define the supporting algorithms
- Develop dynamic models of the system, and tune controller algorithms accordingly to optimize performance
- Translate algorithms into software implementation, and work with the firmware team to integrate that into the firmware framework
- Test, validate, and troubleshoot controller implementation
- Develop and utilize computer simulations (Matlab/Simulink, HiL, SiL) to investigate new algorithms, modifications, or corner-case events
- Support safety/compliance testing
31
Autonomous Steering Systems Controls Engineer Resume Examples & Samples
- Perform steering control calibration and vehicle testing
- Develop specifications and design verification plans for steering control
- Develop and maintain steering dynamics models for algorithm development and stability analysis
- Develop software validation tools using MATLAB/Simulink
- Perform software functional validation (MIL/SIL testing) and work closely with HIL test engineers
- Work closely with EPAS feature and system engineers to resolve in-house software issues
- Develop EPAS HIL lab for bench testing
- Develop vehicle simulation models for algorithm development and calibration
- BS in Electrical, Mechanical, Aerospace, or Computer Science
- 2+ years of Control System development experience
- 2+ years of software development experience including development of “C” code applications
- 2+ years of state machine development experience
- Experience using Static Code Verification Testing and Analysis tools (e.g. Polyspace)
- Demonstrated proficiency with CAN communication and databases
- Experience developing “C” code applications
32
Wind Controls Engineer Resume Examples & Samples
- Build technical expertise with the aim of taking design ownership of certain Wind Turbine Generator systems control strategies and systems
- Utilize First Principles methodologies to ensure physics-based control of Wind Turbine Generators to improve control adaptability to increased understanding of physical processes involved
- Learn all phases of software development from requirements analysis, control design and development and finally product sustaining / support
- Maintain control of the safety aspects of the Wind Turbine as software and electrical components change
- Work closely with Platform Leaders and SCADA development team to understand requirements for complete GE Wind Control and SCADA product design changes and translate to specific product software
- Compile, develop and document requirements for Wind Turbine controls features and components
- Develop Wind Turbine controls strategy for optimal operability, reliability, availability and protection
- Engineer and validate controls software
- Contribute to Controls Design Practices to implement failure prevention
- Support product development programs design review discussions and present relevant design details to chief engineers for evaluation and approval
- BS/MS Degree in Mechanical Engineering, Control Engineering, Electrical Engineering, or similar field with Renewable Energy emphasis preferred
- Experience relevant to Wind Systems, Service or Control
- Experience with Matlab Simulink
- Knowledge of Wind Turbine Generator physical principles
- Ability to succeed in a global team environment, team player with strong communication skills
- Willingness to travel approximately 10% of the time
- Strong English and German skills (verbal and written)
- Experience in modeling, controls, dynamics, testing, and design of wind turbines
- Skilled in control system design for wind turbine applications, including advanced controls
- Experienced in development and review of wind turbine certification standards
- Experienced in modeling and simulating wind turbines in computer simulation codes, such as ADAMS, Bladed, Flex5, and FAST, Simulink or equivalent industry simulation tools
- Experienced in development and validation of computer simulation codes for wind turbines, and development of control system methodology and subroutines for modeling of control systems
- Understanding of security aspects of software and networks
- Greenbelt (internal GE) with demonstrated quality focus
33
Controls Project Engineer Resume Examples & Samples
- Perform and coordinate detailed design, installation, and start-up of new or the upgrading of existing plant machinery and systems. This will often include providing technical guidance and coordination of contract design and installation personnel
- Research, estimate and develop small and medium size projects
- Estimate project cost
- Create and manage project timelines
- Specify and purchase equipment
- Develop job scope documents and conduct bid meetings for projects
- Manage project budget and update cash flow database
- Provide system checkout, debugging, and technical support as required to insure timely and efficient project start-ups
- Manage safety of all project-related activity
- Insure all Project Reviews on assigned projects are completed in a timely manner
- Stay current with technologies being deployed within MCNA in order to ensure that the site operates at peak efficiency. Maintain contacts at other MCNA sites
- Provide timely, up to date, and accurate as-built documentation for new or existing electrical, control system, and/or mechanical systems
- Be a resource to the training department to increase knowledge base of operators and maintenance on projects they support
- Manage contractors (Designers, Electrical, Control System, etc) for project work and safety policy compliance
- Work with programming and operations to develop working P&ID’s
- Support site safety and security in design and implementation
- Research and test new technology for existing applications
- Present projects/improvements to Engineering and Operations Management
- Bachelor of Science in Electrical Engineering or Electrical related degree
- 0-5+ years experience including internship/co-op experiences, in an comparable technical position desirable - food, beverage, pharmaceutical or related industry considered a plus
- Approximately 20-35% travel requirement depending on project demands
- Basic understanding of engineering principals - knowledge of engineering disciplines: Process, Packaging, Electrical, and/or Computer Services are considered a plus
- Team skills - high Performance Team experience a plus
34
Controls Project Engineer Resume Examples & Samples
- The technical and project management knowledge required to execute projects that deliver stated business objectives
- Contributing to a winning environment which promotes safety, trust and confidence
- Complying with and reinforcing safety, security and environmental policies
- Developing accurate and achievable project schedules
- Managing multiple projects to deliver safe, secure and environmentally responsible results that meet the stated project objectives
- Bachelor’s degree is required minimum for consideration. A degree in controls/electrical/electronics is preferred, including courses in computer science
- 5-10 years’ experience in an comparable technical position - food, beverage, pharmaceutical or related industry preferable
- Basic understanding of engineering principals - knowledge of engineering disciplines: Process, Packaging, Electrical, Construction or Computer Services
35
Transmission & Driveline Controls Engineer Resume Examples & Samples
- 3+ years’ experience with control system development and validation against functional attributes. (experience may include course work)
- 3+ years’ experience with s/w development and simulation tools (C, Clearcase, Unix, Matlab, MBD) (experience may include course work)
- 3+ years’ experience with data analysis tools and methods (experience may include course work)
- Experience in automotive control systems engineering, especially autonomous vehicle control
36
Project Engineer Controls Resume Examples & Samples
- Involve during designing, commissioning followed by execution of projects. (projects will include (IBMS) HVAC Controls – AHUs, FCUs, Chiller and Air washers) and Security Products (CCTV, Access control systems, time & attendance systems)
- Responsible for IBMS/BMS projects running in north India so he will have to travel also for projects outside NCR also (Parts of Punjab/Haryana)
- Handle multiple (7-8) projects at time
- Provide Invoice details to the team
- Provide monthly forecast for collection/revenue of projects handled by him, responsible for handling work from various contractors involved in execution
- Experience Required: 3-5 years
- B. Tech (electronics & electrical)
- Person will be a Project Engineer, should have 3-5 yrs experience in same field
- Willing to join us immediately, he will report to Project Manager (West) directly
37
Project Engineer Controls Resume Examples & Samples
- Responsible for IBMS/BMS projects running in Argentina so he will have to travel also for projects outside (Bolivia, Paraguay, Uruguay)
- Handle multiple projects at time
- Experience Required: Not required
- Person will be a Project Engineer, should have experience in same field
- Willing to join us immediately, he will report to Team Leader directly
38
Powertrain Controls Obd Subsystem Engineer Resume Examples & Samples
- Bachelor of Science in Electrical Engineering, Mechanical Engineering or Computer Science Engineering
- 2+ years of experience in understanding basic principles of controls engineering
- Master of Science in Electrical Engineering, Mechanical Engineering, or Computer Science Engineering
- Working knowledge of basic combustion engine operating principles
- Familiarity with software integration and debug
- Experience performing vehicle, dynamometer & software debugging
- Practical ability to test, debug, and validate software in vehicle and dynamometer settings
- Proactive individual, outstanding leadership and interpersonal skills
- Engine or OBD-II calibration experience preferred
- Personal computer skills with major applications such as EXCEL and MATLAB
- Experience developing embedded diagnostic or control algorithms
- Experience using Ford internal tools to develop, implement and release feature code
- Expertise in use of calibration development tools
- Familiarity with and access to Ford Motor Company test facilities
39
Controls Project Engineer Resume Examples & Samples
- High School Diploma or GED AND 9 years of engineering, design, mechanical, or project management; OR
- Associate’s Degree AND 7 years of engineering, design, mechanical, or project management; OR
- Bachelor’s Degree AND 5 years of engineering, design, mechanical, or project management
- 5 year minimum experience in related field
- Advanced training, knowledge, and awareness in Automated Systems and Robot Applications
- Functional knowledge of Robotics and/or Automation
- Experience with industrial control systems, specifically automotive BIW (Body-in-White) applications
- Knowledge of safety standards including RIA/ANSI 15.06 and NFPA
- Functional Robot Electrical Maintenance Skills
- Competence in hardware design involving control components
40
ALC Controls Engineer Resume Examples & Samples
- Completes each assigned project focusing on customer satisfaction and specification compliance while trying to maintain budgetary guidelines. Identify all projects that do not meet the budget and itemize the budget variances
- Experience with engineering design programs such as AutoCAD, Microsoft Visio, etc
- Knowledge in DDC control theory and applications pertaining to the HVAC/Control preferred
- Prior experience in HVAC and/or Building Automation preferred
41
Power Electronics Controls Engineer Resume Examples & Samples
- Bachelor's Degree in Electrical Engineering or related field, with an emphasis in Power Electronics or AC Systems Design
- Minimum of 5 years of experience developing controls for power conversion products
- Minimum of 1 year of experience in developing embedded control applications using C/C++ and real-time operating systems (e.g., QNX)
- Master's Degree in Technology
- Experience with Software Structuring and Design documentation
- Educational background in Control Theory and Power System Stability Analysis
- Experience with modern control techniques, software languages and development & analysis tools for real-time controls
- Familiarity with simulation tools (e.g. Simplorer, SABER, Matlab / Simulink)
- Familiarity with electric machine modeling and control
- Working knowledge of electric motor drives or photovoltaic system technologies
- Working knowledge of GE manufactured power electronics and control systems
- MBB/ BB, DFSS certified (GE employees only)
42
Engineer, Controls Resume Examples & Samples
- Four year degree in Engineering from an accredited college/university. Degreed candidates must have a minimum of five years experience in a power plant environment
- Union experience
- Experience in Power Plant Operations
- Experience in project management with demonstrated ability to lead and work in a team environment
- Strong computer, networking, and Network Security skills
- Demonstrated ability to work effectively and cooperatively with others as well as operate with a minimum of supervision
- Coordinates & executes technical investigations, engineering economic studies, operating studies, design, tests, long range plans, forecasts, cost estimates, computations, inspections, inventories and reports as may be required for the completion of assignments
- Knowledge of field instrumentation and configuration of instrumentation in Process and Electrical Power Generation Controls Systems
- Process knowledge of electric industry generation plants and understand Piping and Instrumentation Diagrams and electrical drawings
- Knowledge of DCS, PLC, and controls networking systems from multiple vendors (GE Mark VI, Emerson Ovation, Rockwell Automation, Modicon, and others)
- Knowledge of general boiler tuning, mill tuning, Burner Management System logic, Turbine Controls and valve tuning, and Environmental Controls tuning (FGD, Bag house, ACI, SCR, SBS, etc
- Knowledge of Ovation Data Links to various field equipment (CEMS Data loggers, SEL relays, PLC's, etc) and associated communication interfaces (Modbus, TCP/IP, etc.)
- Knowledgeable in network practices, PC based operating systems, and network switching and firewall technology. Specifically in regards to NERC CIP regulatory requirements
- Understanding of general cyber security practices and appliances such as patch deployment, anti-virus, SIEM, backup and recovery, and change management systems. Ovation OSC experience is a plus
- Develop, review, and implement network architecture standards and security practices for Industrial and Electrical Power Generation Control Systems
- Provide engineering support of control systems for issues as they arise
43
Motor Controls Engineer Resume Examples & Samples
- Develop control algorithms for AC electric machines and 3-phase switching power converters
- Perform simulation and analysis of electric drive and high voltage power electronics
- Plan and perform algorithm development and/or verification in dynamometer facility and on hardware-in-the-loop (HIL) or software-in-the-loop (SIL) systems
- BSEE
- At least one year experience with either, motor controls, power electronics, AC/DC drive systems or a combination of
- At least one year of experience with of AC electric machine operating principles and of 3-phase switching power converter topologies
- Minimum five years of engineering experience in related area
- Understanding of digital controls of 3-phase switching power converters and AC electric machines
- Ability to follow algorithms coded in C and C++ programming languages
- Experience in using Matlab/Simulink
44
Hvacr Controls Engineer Resume Examples & Samples
- Final documentation of control system specifications and design guidelines
- Control system modeling, simulation, and bread boarding
- Development of control algorithms
- Development of control system specifications
- Selection and specification of control system components and hardware
- Knowledge of vapor compression HVACR systems desired
- Strong analytical and strategic thinking skills
- Ability to synthesize challenging technical concepts
- Organizational and interpersonal skills required
- Candidates must be adept at report writing and technical presentations
- Candidates must be self-motivated, able to follow directions and work independently
- Highly organized with strong attention to detail, and ability to manage multiple priorities
- Competency in Microsoft Office: Excel, Word, PowerPoint
- Must be proficient in spoken and written English
45
Controls Project Engineer Resume Examples & Samples
- Provides controls feasibility and equipment cost estimates to automation development team
- Works with mechanical engineering department to determine design complete dates. Prioritizes work to fulfill deadlines
- Specifies Control Hardware and generates Bills of Material, Designs Control Panels and Enclosures, Creates Electrical & Pneumatic Schematics
- Assists in executing the machine debug, qualification, and installation
- Provides technical support for the launch of equipment produced by the Automation Team. Responsibilities will include traveling to mass production facilities for machine install & qualification, training of technicians and operators to ensure the proper and safe operation of equipment and supports any software changes in the field
- Attends Design Reviews and PFMEA’s while working with mechanical engineers to improve current and future designs of automation
- Tracks projects using internal methods for summarizing component cost, labor, and lead-time. Develops accurate, up-to-date BOM’s and Spare Parts Lists
- Associates' degree in Electrical Engineering or Electrical Engineering Technology
- 3+ years’ Control Panel Design & PLC Programming Experience
- 2+ years’ Project Management experience
- Bachelors' degree in Electrical Engineering
- Proficient in Ladder Logic & Motion PLC Programming
- Experience in generating Industrial Electrical Schematics including Safety Guarding Standards
- Experience with high speed synchronous, asynchronous, flexible (robotics) assembly systems
- Expertise in the design and documentation of machine controls
- Ability to work effectively with global cultures
46
Engineer Controls Detroit Resume Examples & Samples
- Read and Edit PLC logic,
- Program and troubleshoot robotics,
- Read and evaluate electrical schematics,
- Troubleshoot using meters, laptop, schematics and manuals,
- Motivated to continuous improvement in the process to maintain optimum operation conditions and plant productivity
- Work independently and take ownership while working in a team environment
- Demonstrate customer focus by continually meeting and exceeding customer expectations
- Programming and installation of automation systems and interfacing with other factory control systems including PLC’s, HMI’s, robotics, drives and computers
- Modifications and improvements to automation equipment
- Review work orders and receives verbal instructions on job assignments
- Troubleshooting support of production equipment
- Respond to emergency requests for immediate repairs
- Ability to work overtime and flexible hours as needed
- Maintains specified records and logs of repairs, maintenance-related activities
- Performs preventative maintenance procedures following an established program
- Follows applicable codes and regulations
- Cleans immediate work areas
- Performs other duties incidental to the position, as assigned
- Maintain safe work environment and follow all safety standards
- Comply with all OSHA standards and Textron health & safety standards
- Comply with all ISO 14001 standards
- Comply with all TS 16949 standards
47
Power Electronics Controls Engineer Resume Examples & Samples
- Bachelor's Degree in Electrical or related Engineering field, with an emphasis in Power Electronics or AC Systems Design
- Minimum of 1 year of experience in developing embedded control applications using C / C++ and real-time operating systems (e.g., QNX)
- Master's Degree in technology field
- Familiarity with simulation tools (e.g. Simplorer, SABER, Matlab/Simulink)
- MBB / BB, DFSS certified (GE employees only)
48
Engineer, Controls Resume Examples & Samples
- Program PLCs to support MHE equipment operations
- Interface with customers to determine system requirements
- Interface with internal engineering/project management to determine system requirements
- Customer interface and relationship management
- Support electrical installation via interfacing to electrical installers
- Debug electrical installation of controls and motor components
- Up to 75% travel is required
- 60 plus hours per week during site startups could be required
- Support after hours customer calls
- A minimum of 3 years experience in a related position
- Understanding of motor control
- Debugging and problem resolution skills
- Understanding of control devices
- Basic mechanical skills
- Ladder Logic Programming
- VFD operational understanding
- Ability to integrate components via serial interfaces and Ethernet interfaces
- Proficient with PC desktop applications (MS Office)
49
Controls Project Engineer Resume Examples & Samples
- Responsible for the sequence of operations which meet the project requirements
- Validates the engineered bill of material costs
- Responsible for vendor purchase orders and orders Trane material under Project Manager’s direction
- Responsible for creating installation drawings, submittal drawings, as-built drawings and final validation of system operation
- Provides engineering direction and support to other team members
- Negotiates and orders required Trane material and outside purchases
- Maintains customer satisfaction by investigating concerns, implementing corrective action, and communication with staff, as needed, providing customer feedback
- Some travel with occasional overnight stays. (10%)
- Experience designing and programming building automation controls systems is a must. Experience with Trane Tracer Summit or Tracer SC is strongly preferred
- Familiarity with the concepts of new construction and renovation/retrofit, performance contracting, and service project management
- Proficient computer skills are required (Microsoft Office)
- Some computer programming experience is required
50
System Controls Engineer Resume Examples & Samples
- Lead controls aspects of capital projects with Division Engineering partners
- Lead strategic improvement initiatives for the department
- Support Systems Technicians with tactical projects and growth
- Drive continuous improvement activities for the plant
- Bachelor’s Degree of higher from an accredited Institution in the Engineering discipline
- Minimum of four (4) years of experience with any combination of the following: manufacturing, capital projects, equipment installation, and/or troubleshooting support
- Controls engineering experience
- Five (5)+ years of experience of manufacturing, equipment installation and troubleshooting support
- Knowledge and experience in a manufacturing site working with maintenance and resident engineering
- Experience in maintaining process instrumentation
- Experience in programming manufacturing equipment
- Experience in capital project support and management
- Proven track record of performance in process improvement
- Ability to work with a cross functional team in the manufacturing organization
- Demonstrated ability to clearly define and achieve goals
51
System Controls Engineer Resume Examples & Samples
- Networking and Communications: design and configure network and communication paths for Remote Terminal Units (RTUs)Programmable Logic Controllers (PLCs), Human Machine Interface (HMIs), and other SCADA system equipment; specify and design communication networks including data security and availability; develop basic specifications for copper, fiber optic, microwave, power line carrier, or radio communication paths; travel to project sites to troubleshoot and commission network and communication systems. Applicable network and communication protocols: Modbus, Ethernet I/P, ControlNet, TCP/IP, UDP, BAC net 485, BACnet IP, GeniusBus
- Logic and Control Systems: develop and implement logic and control schemes for remote and local operation of manufacturing facilities and/or power system equipment; develop programs on various platforms for implementation of these schemes; travel to project sites to test and commission the control schemes. Applicable Logic and Control Platforms: ControlLogix, SEL RTAC, GE-90-70, GE 90-30, GE RX3i, Micro 90, Versamax Remote I/O
- Data Acquisition and SCADA infrastructure: Prepare points lists of all data to be transferred between control centers and controlled apparatus, assign and program data addressing and routing information, develop Human Machine Interface (HMI) screens, travel to project sites to test and commission data transfer schemes. Design and configure virtual environments for SCADA servers including Active Directory, Historical Data, I/O interface, Terminal Services, etc. Applicable Software: VMWare, ESXI, Hyper-V, Wonderware, FactoryTalk SE/ME, AcSELerator RTAC, Visual Basic, OSIPI, Python scripting etc
- 5+ years of industry experience performing studies in technical disciplines described in the Job Description section
- EIT certified (passing FE Exam) and eligible to sit for the PE Exam
- Strong preference is given to those currently holding or willing to undergo the investigation required for a TS/SCI security clearance
- Preference is given to applicants with any of the following: GPA above 3.5/4.0, and power system courses covering topics such Ethernet and networking, PLC programming and microcontrollers, network communication protocols, network security, intro to utility SCADA, three-phase powerpower electronics, standby power systems, and rotating machines
