Electronic Engineer Resume Samples

4.5 (101 votes) for Electronic Engineer Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the electronic engineer job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Resume Builder
CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.
USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.
SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Create a Resume in Minutes
AO
A Ortiz
Adele
Ortiz
654 Nader Meadows
Dallas
TX
+1 (555) 204 4631
654 Nader Meadows
Dallas
TX
Phone
p +1 (555) 204 4631
Experience Experience
Chicago, IL
Electronic Engineer
Chicago, IL
Mraz, Schultz and Gibson
Chicago, IL
Electronic Engineer
  • PCB Layout development, follow and test first PCB prototypes working with software developers
  • Work with others to develop efficient processes using flowcharting techniques and other process improvement tools
  • Develop & maintain testing fixture for PCBA and product, prepare procedure or work instruction, and provide guidelines for operators
  • Perform research to identify trends, weaknesses and opportunities for improvement. Create reports and explain conclusions drawn from research
  • Contributes to research, technology development and program execution to generate new and/or improved products
  • Undertake set to work activities on board submarines and provide support to defect rectification
  • Provide post production support including design improvements, identification of technical issues, cost reduction, and product refresh/redesign
Boston, MA
Senior Electronic Engineer
Boston, MA
Emard LLC
Boston, MA
Senior Electronic Engineer
  • Provide support on product design issues and product improvement (including engineering design, documentation and configuration control)
  • Review work of junior EEs to ensure quality of execution and compliance with development processes
  • Support electronic module upgrade, debug, optimization, cost reduction, quality improvement in product lifecycle management
  • Develops control and test software using LabView and other development tools
  • Maintain the existing products released, fix the defects meet in the production or make improvements collected from internal/external customers
  • Develop and perform operational, maintenance, for electronic products, components, equipment, and systems
  • VHDL FPGA firmware development
present
Phoenix, AZ
Lead Power Electronic Engineer
Phoenix, AZ
Kertzmann, Jerde and Waelchi
present
Phoenix, AZ
Lead Power Electronic Engineer
present
  • Working against customer specification at tender stage (Clause by Clause, Risk analysis)
  • Independent and team worker (Pro-Active)
  • Circuit simulation for design and future testing as part of project awarded
  • Integration with other engineering departments for product definition (System design, Main Scheme, Layout, Commercial)
  • Design & type testing programmes
  • Product approval, including routine and type test specifications and pre-commissioning testing
  • Product support during complete life cycle (From Tender to Project commissioned)
Education Education
Bachelor’s Degree in Electrical Engineering
Bachelor’s Degree in Electrical Engineering
Arizona State University
Bachelor’s Degree in Electrical Engineering
Skills Skills
  • Basic quality and development process knowledge
  • Good team work spirit and communication skill, strong design review and problem solving ability
  • Good understand EMI/EMC knowledge, good at EMC control
  • Good knowledge in using simulation tools such as Hyperlynx for PCB design
  • Excellent interpersonal skills with ability to engage effectively at all levels
  • Demonstrate excellent interpersonal skills which enables you to work harmoniously in team
  • Excellent analytical and problem solving skills, an ability to understand complex problems and generate appropriate pragmatic technical solutions
  • To improve maintenance development projects in order to increase reliability and maintainability level of machines
  • To define and improve maintenance strategies in order to increase equipment reliability, in collaboration with Reliability Engineers
  • Good knowledge of electrical codes and safety standards
Create a Resume in Minutes

15 Electronic Engineer resume templates

1

Show Electronic Engineer Principal Resume Examples & Samples

  • Lead an engineering team in the production of designs, documentation for complex projects through all phases of engineering design, production, installation, testing, and documentation
  • Develop procurement specifications and design documents with emphasis on complex systems involving equipment, components, systems design and integration, procurement and installation
  • Must stay versed on current technology worldwide
  • Ensure conformance to department standards and procedures
  • Provide electronic engineering manpower and schedule planning in support of estimating activities
  • Review final electronic contractor documentation and review as-built drawings
  • Establish technical and project process strategies and standards for Portfolio level projects
  • Develop risk analysis and inform management, as required
  • Develop the system level Hazard Analysis and safety mitigations
  • Develop Trade-Studies of implementation options
  • Lead an engineering team in the production of engineering designs, documentation for gate level attractions through all phases of engineering design, production, installation, testing, and documentation
  • Percent time leading 60%
  • Project and Staffing Strategy reviewed by Manager
  • Financial, Schedule, Technical and Design latitude reviewed only at Project Design Reviews
  • Ability to develop system level designs
  • Need to have experience with servo motors, EtherCAT, and CAN open
  • Working knowledge of key Show disciplines beyond control systems (e.g. A/V, Mechanical, Parkwide, Lighting, Facilities)
  • Ability to provide trade-offs between disciplines
  • Scheduling Methods / Experience (required)
  • Estimating Methods / Experience (required)
  • PLC programming (desired)
  • Disney Show Control Sys. Arch
  • Packaging
2

Ph Show Electronic Engineer, Senior Resume Examples & Samples

  • Lead an engineering team in the production of designs for complex projects through all phases of engineering design, production, installation, testing, and documentation
  • Troubleshoot and resolve installation conflicts, interferences, and other problems
  • Develop procurement specifications and design documents with emphasis on complex systems involving equipment, components, systems design and integration, procurement, and installation
  • Actively stay current with electronic technologies and trends
  • Ensure conformance to company and regulatory standards
  • Support facility design for equipment details such as utilities including electrical power and equipment heat loads
  • Ensure all stakeholder needs are considered, and competing priorities are properly balanced
  • Review final electronic contractor documentation and as-built drawings
  • 7-10 years experience with complex control systems and computer-based systems
  • Thorough understanding of electronic principles and systems
  • Understanding of software system concepts
  • Thorough knowledge of computer systems, components, and peripherals
  • Extensive experience with motor and servo control systems
  • Strong troubleshooting skills
  • Knowledge of theatrical systems is desired
  • Understanding of basic mechanical concepts
  • AutoCAD and SolidWorks experience highly desired
  • Proficient with industrial control systems, such as PLCs and remote I/O
  • Experience with wireless and RF systems highly desired
  • Thorough knowledge of networking systems and concepts
  • Electromechanical (packaging) design experience
  • Extensive experience with hands-on installation and testing of complex control systems
  • Familiar with regulatory and industrial standards, such as NEC, UL, and ASTM
  • Experience with project management techniques: planning, estimating, and status reporting
  • Able to communicate technical concepts to non-technical people
  • Minimum Bachelor of Science Degree from an accredited university
3

Electronic Engineer Resume Examples & Samples

  • Honors degree or higher in Computer Science, Electronic Engineering or a related discipline
  • Enthusiastic, self starter with good initiative and energy
  • Excellent interpersonal skills with ability to engage effectively at all levels
  • An understanding of power electronics, systems design engineering, control and communication principles
  • Knowledge of solar PV systems or related technologies would be an advantage, but is not essential
  • Knowledge of CAN, Modbus ,Boot Loader, I2C, UART, GSM, GPS, Low Power, USB, WiFi
  • Sensor development and integration
  • Excellent analytical and problem solving skills, an ability to understand complex problems and generate appropriate pragmatic technical solutions
  • Proven ability to analyze technical development/design issues and manage them to resolution .Prototype build and test
  • Design of products to the relevant European standards
  • Good knowledge of electrical codes and safety standards
  • Knowledge of Heat Pump systems or related technologies would be an advantage, but is not essential
4

Senior Electronic Engineer Resume Examples & Samples

  • Work with cross function team to understand customer requirement, participate in system / subsystem design review, finalize detail electric design requirement by reviewing with systems & global engineering teams
  • Create the design documents involving EE tolerance analysis for design review (HLD, dFMEA, requirements traceability matrix etc.), and verification plan mapping to the key performance and reliability requirement
  • Verify the design performance to meet the requirement, complies with the Manufacturability and Serviceability, and achieve the cost/reliability target
  • Collaborate closely with the mechanical engineering team members to create product enclosures with compelling design and form-factors that also meet regulatory, safety, environmental, reliability, thermal and interface standard (Ethernet, USB, etc.) compliance requirements
  • Collaborate closely with system / chemical engineer to provide EE support on feasibility analysis, fast prototype, system integration & debug
  • To work with the sourcing team and the supplier to coordinate the manufacturing and provide detailed requirement for FCT of PCBA to make sure the PCBA from production line can meet design requirement
  • Experience in embedded system design with 8/16/32-bit microprocessor design such as PIC, ST ARM, MSP430, PowerPC, Coldfire
  • Experience gate / technical review process, good at documentation for technical solution
  • Capable of analyzing the root cause when there is a failure related to electrical component and can provide the mitigation and long-term solution
  • Familiar with knowledge of signal integrity, EMC/EMI, CCC, UL, RoHS
  • Familiar with multi layers PCB layout / review, proficient in Altium Designer / Cadence is preferred
  • Proficient in testing instruments (digital oscilloscopes, logic analyzers, spectrum analyzers)
  • Understood Design For Test (DFT) and Design For Manufacturing(DFM) background
5

Lead Electronic Engineer Resume Examples & Samples

  • Design schematic of digital, mix signal and power electronics circuit board that satisfied the design requirement
  • Collaborate closely with the firmware engineering team members to create optimal hardware/firmware partitions that meet functional requirements and cost goal
  • Cooperate with cross function to conduct the design transfer ensuring the product developed could be transferred to production smoothly
  • Review work of junior EEs to ensure quality of execution and compliance with development processes
  • A Bachelor’s degree or above in Electronic Engineering, mechatronics or related field with a minimum of 5 years working experience; master degree is a plus
  • Excellent understanding of analog, digital and power supply design fundamentals
  • The candidate must be flexible, pro-active and willing to learn and contribute to meeting team objectives
  • Experience in instrumentation, semi-conductor capital equipment, automation or control industries
  • Hands-on familiarity with physical gauges (flow, pressure, temperature, force, current, voltage, etc)
6

Electronic Engineer, Principal Resume Examples & Samples

  • Lead technical effort estimation, design plans, and build/integration plans and activities for new product design and development
  • Lead the development of product level and circuit board level electronics architecture from industry data, customer interactions, existing products technology trends, and market needs
  • Produce electrical deliverables according to rigorous phase gate development process and development standards. These include hardware requirements, design description, theory of operation, test plans, test procedures including test acceptance criteria, functional block diagrams, engineering analysis (math, simulation, & experimentation), bill of material, component symbols, schematics, constraints, and gate review records
  • Develop, manage, and track status of product technical performance and electrical requirements
  • Prepare technical presentations for customers, engineers, and executive management
  • Lead the resolution of technical problems or issues using expert knowledge, root cause analysis, and change impact analysis
  • Maintain knowledge of aerospace and defense standards applicable to Korry products
  • Minimum 10+ years’ of experience in development digital and analog circuits for aerospace and defense
  • Expert in development of avionics hardware systems including complex electronic hardware, computer architectures, and avionics inputs/outputs
  • Expert knowledge in aerospace and defense electronics best design practices
  • Expert knowledge in multiple design and analysis tools: FPGA/PLD, Schematic, Simulation, Mathematics, etc
  • Ability to self-direct and self-motivate, work in multidisciplinary teams with only general directions, prioritize work in a fast paced, dynamic environment
  • Expert in written and verbal communication and excellent presentation and teamwork skills
  • BSEE or MSEE degree from accredited school
  • Minimum 10 years of experience in aerospace or other regulated industry
7

Electronic Engineer Resume Examples & Samples

  • Conducts exploratory research, design, development, and related testing and evaluation of state-of-the-art technologies
  • Develops and designs theoretical treatments, instrumentation, equipment, and procedures for the testing and evaluation
  • � BS (Electrical Engineering) or BS (Electronics Engineering Technology) from an ABET accredited program in engineering is required
  • Technical training within the subject areas or related technical field with certifications from technical training schools or Military training schools is a plus
  • Five years of engineering and systems integration experience is required. Experience within the subject areas of interest is a plus
  • A minimum of three years of managing the full lifecycle of technical projects in a research and development setting
  • Must possess knowledge of concepts, principles, and practices of electronic engineering and systems integration
  • Must possess knowledge of concepts, principles, and practices of RF communication systems, i.e. VHF, UHF, Digital
8

Electronic Engineer Resume Examples & Samples

  • Undertake set to work activities on board submarines and provide support to defect rectification
  • Work with the Electronics and Mechanical Engineering Design teams in order to develop prototype (analogue/digital) equipment designs
  • Work with the Manufacturing teams to deliver hardware equipment to meet customer delivery schedules, this may involve providing assistance in the sourcing of parts and materials, assembly, integration and testing as per the engineering specifications
  • Provide the customer with both planned and reactive post-installation technical services on Customer/User site, as required by company commitments on responsiveness, periodicity, service time or service quality
  • Participate in design reviews, test readiness reviews and production readiness reviews
  • Support preparation of documents required for design data packs, such as: specifications, compliance matrices, design calculations, analysis reports, drawings, test plans, test reports and BOMs
  • Document engineering and test work in accordance with the company CHORUS 2 DDQS Hardware Development Process
  • Support the maintenance of configuration baselines using the company standard IPESA configuration management system
  • Ensure that the relevant elements of the Thales OH&S policies and procedures are followed during activities at Rydalmere and when working off site
  • Tertiary qualified or similar in Electrical / Electronics engineering
  • Proven industry experience with good communication skills
  • Knowledge of VME and cPCI hardware systems
  • Experience with hardware/software integration
  • Knowledge of and experience in PCB design and layout tools (Altium) and circuit simulation
  • Knowledge of and experience with medium/high speed digital design
  • Knowledge of and experience with analogue hardware design
  • Previous experience in electromechanical, PCI based hardware and military documentation standards would be advantageous
9

Electronic Engineer Resume Examples & Samples

  • Involved in debugging to component level on new and pre-existing product
  • Calibration of sub-assemblies and full systems
  • Responsible for assembly, test and verification of sub-assembly prototypes
  • Ability to de-soldering using various repair equipment
  • Excellent documentation control using various MS packages
  • Recommend and initiate solutions to resolve production related problems
  • Participate in recommending/sourcing 3rd party electronic/electrical components for new design projects
  • Control of 3rd party component selection & testing
10

Electronic Engineer Postdoctoral Fellow Resume Examples & Samples

  • Present our research findings and directions to prospective clients and funders
  • Develop collaborations with researchers working on fuel cell vehicles and vehicle-grid integration at UC Berkeley and in the international research community
  • Mentor student researchers, facilitate regular team meetings, and foster a team dynamic
  • Ph.D. in Electrical Engineering, Mechanical Engineering, Civil or Environmental Engineering, Computer Science, or a closely related field
  • Experience with vehicle-grid integration, smart grid, renewables integration, vehicle powertrain systems, modeling of fuel cell systems, unit commitment and economic dispatch, electricity market design, and smart grid security
  • Rigorous grounding in mathematical methods, control systems, and optimization
  • Ability to work as an independent researcher with a high level of scientific judgment and initiative
  • Experience in collaborative efforts as a member of a diverse research team. Ability to work effectively both independently and as part of a larger team
  • Familiarity with MatLab, Python, or similar tools for data analysis, simulation, and mathematical modeling
  • Strong publication record in related fields, proficiency in mathematical modeling, control systems, and data analysis (particularly using MatLab, Python, or similar tools)
  • Experience in developing research proposals
  • Expertise in mathematical modeling, controls, and optimization, with specific application towards grid integration and support
  • Strong interest in vehicle powertrain and hydrogen-FCEV-grid systems
11

Electronic Engineer Postdoctoral Fellow Resume Examples & Samples

  • Develop collaborations with researchers working on EVs and vehicle-grid integration at UC Berkeley and in the international research community
  • Experience with vehicle-grid integration, smart grid, renewables integration, vehicle powertrain systems, modeling of battery systems and degradation, unit commitment and economic dispatch, electricity market design, and smart grid security
  • Familiarity with Matlab, python, or similar tools for data analysis, simulation, and mathematical modeling
  • Strong publication record in related fields, proficiency in mathematical modeling, control systems, and data analysis (particularly using Matlab, python, or similar tools)
  • Expertise in mathematical modeling, controls, and optimization, with specific application towards vehicle-grid integration
  • Strong interest in vehicle powertrain and vehicle-grid systems
12

Intermediate Electronic Engineer Resume Examples & Samples

  • Design analog circuits, including modelling and simulation (analog and digital)
  • Select electronic parts
  • Participate in design documentation editing, technical budget as well as the relevant documentation for the startup and tests
  • Support startup and tests of electronic boards
  • Participate in multidisciplinary design review meetings and present the project progress
  • Participate actively in planning and technical proposal activities (estimates)
  • Perform tasks in compliance with safety standards (OHS, CE, CSA) environmental regulations (RoHS, WEEE) and aerospace or military missions (NASA, ESA, ASC)
  • Bachelor degree in computer engineering or electrical engineering
  • At least 7 years of experience in engineering
  • Knowledge of the amplification of low frequency signals
  • Abilities in debugging electronic boards
  • Asset: Knowledge of VHDL programming
  • Asset: Knowledge of infra-red detectors
  • Asset: Knowledge of electromagnetic compatibility and electrical safety standards
  • Asset: Knowledge of aerospace and military instruments design
  • Asset: Knowledge of Altium Designer, Pspice, MS Office, Matlab or Mathcad
  • Good knowledge of French and English (written and spoken)
13

Ur-electronic Engineer Intern Resume Examples & Samples

  • Hardware research and development for industry automation control products
  • Participate in all stages of development including requirements analysis, concept design, detail design, prototype build, engineering test, drawing release and all the process
  • Write development documents and user documents
  • Provide technical support to commercial team and customers
  • Excellent understanding of analogue, digital and power design fundamentals
  • Good knowledge of microcontroller and microprocessor designs
  • Strong ability to analyze and resolve problems
  • CAD using Mentor Graphic tool or equivalent
  • Master Degree in Automatic Engineering, Electronic Science and Technology, Communication and Information System
14

Hiring New Grad Electronic Engineer Resume Examples & Samples

  • Bachelor of Science degree in Electrical Engineering or Computer Engineering with 1-5 years of experience
  • Knowledge of FPGA development, simulation, and verification tool(s) including MATLab, Simulink
  • Knowledge of Microprocessors, Programmable Logic, Real-Time Systems, and Analog and Digital Designs
  • Knowledge of digital signal processing and software defined radios a plus
15

Electronic Engineer Resume Examples & Samples

  • Must possess effective analytical and problem-solving skills
  • Must have experiences in analogue and digital circuit design
  • Must have knowledge about signal-processing, HF-Design and/or Opto-Electronic
  • Programming capabilities in C, C++ and/or C# are welcome
  • Must be capable of working independently and in a team-based environment
  • Must be able to communicate clearly, both verbally and in writing
  • Must be capable of persuading and influencing others
  • Technical skills as required by the projects (e.g., E-CAD design, instrumentation (test equipment)
  • Must be able to identify, manage and communicate risk
  • Effective in both product design and implementation
  • Knowledge of English and German (fluent speaking and writing)
  • MS EE or comparable fields (or equivalent experience) and a minimum of two years of related experience
16

Electronic Engineer Resume Examples & Samples

  • Develop electronic circuit designs, covering a wide range of digital and analogue technologies, for high volume, safety critical automotive control systems
  • Perform tolerancing and worse case analysis
  • Support FMEA, FTA and safety/reliability analysis
  • Generate requirements, design documents and test documents
  • Generate test plans and conduct validation/verification/test programmes to ensure designs are fit for purpose and conform to design requirements
17

Lead Electronic Engineer Resume Examples & Samples

  • Supervise the Electronic team: Conduct with objectives settings and reviews with each member of the group. Work with the R&D manager and/or project engineers to forward planning usage of resources and budget required to meet corporate objectives. Work with the R&D manager to set up training plans for the electronics team members
  • Supplier Management: Manage all electronics activities outsourced to external electronics engineering suppliers. Work with the R&D manager to set up contracts. Establish statement of work, raise POs and ensure that suppliers deliver output according to agreed contract
  • Electronic Design: Responsible for the proper conduct of electronics design projects, liaising with other departments, component suppliers, application support, test houses and others as required
  • Generate requirement specifications and verification protocols during the design & development process
  • Act as a key technical driver/contributor to help win new business by applying their innovation skills and working cross-functionally. Elements associated with success will be: - Creation and development of innovative circuits- Technical presentations and discussions,- Feasibility studies, - Innovative component selection to optimise cost and performance benefits, - Ensuring designed products have a competitive advantage
  • Lead technical root cause analyses in resolution of field quality issues, supporting Quality and Commercial functions as appropriate
  • Instruct, guide and coordinate PCB designers as required
  • Modify both new and existing circuits / components to efficiently meet product specifications and customer needs
  • Act as R&D representative on selected project Core Teams, providing inputs to cross functional teams, generating project timelines and budgets and ensuring delivery of requirements
  • Excellent schematic design experience
  • Strong analog design experience with low frequency circuits
  • Digital circuit experience with embedded processors
  • Awareness of C/C++ and Assembler programming and techniques
  • Awareness of regulations that apply in consumer and medical electronic products
  • Experience in concept generation and systems design
  • Self-motivation and the ability to motivate others in pursuit of solutions
  • Awareness of manufacturing/assembly process and techniques
  • Excellent team player
  • Track record of on time, on budget project delivery
  • Quality focused
  • Commercially aware
18

Ur-electronic Engineer, Beijing, Eaer, HTS Resume Examples & Samples

  • Engage in the Avionic Hardware Build in Test (HBIT) . Perform and work on HBIT test requirements, design, development, verification and test
  • End item test (EIT) for avionic products. Work on EIT solution design, development, V&V and debug support on factory site
  • Work on local Electronic Capital project execution and make sure to complete the tasks on time
  • Compliance with Engineering Standard design practices including Tools, Processes, and Documentation. Support the process standardization and improvement
  • Supports Engineering Test Services productivity improvement initiatives
  • Provide translation services and technical support on test Solution/test bench to Honeywell customer and partner in China
  • Travel and work on-site in other country to involve in global programs
  • Bachelors’ degree in electronic Engineering, Computer Engineering, Aerospace Engineering or equivalent
  • Minimum of 2 years’ experience in electronic development, electronic test, test solution, embedded software design and verification or related
  • Electrical and Electronics knowledge (Analog & Digital, ability to read & understand schematics, wire lists)
  • Software knowledge on c, c++, Labview. Experienced in test software development on embedded linux OS
  • Experienced in integrated computer network system integration and have test bench design and operation knowledge
  • Must be able to work effectively in a team environment
  • Strong oral and written communication skills both in Mandarin and English
  • Aviation product design or testing experience is highly preferred
  • Experienced in communication protocols (ARINC429, CAN, RS232 and RS485), Analog I/O, Discrete I/O and power solution, etc
  • Project management skill is preferred
  • Good customer interface skills with the ability to work directly with technical and non-technical personnel is preferred
  • Experience work with international team and can take oversea short-term on-site work
19

Lead Electronic Engineer Resume Examples & Samples

  • Design of innovative circuits for sensors and sensor systems
  • Schematic capture and PCB design
  • Collaboration with other team members (including both hardware and software engineers) to agree system designs, interfaces and protocols
  • Provide support in system acceptance testing and validation activities
  • Support the operations team to enable a smooth transition of product developments from engineering to manufacturing operations
  • Support of customer technical issues
  • Degree/HND in Electrical & Electronic Engineering or equivalent knowledge and experience
  • A solid understanding of analogue and digital design
  • Experience of industry standard PCB CAD packages, ideally Altium Designer
  • Creating complex multi-layer PCB with multiple design interfaces including RF, digital, FPGA, power supply and mixed signal circuitry
  • Demonstrate previous success working in a team based environment to meet objectives
  • Ability to write comprehensive technical design documentation
20

Electronic Engineer Resume Examples & Samples

  • Be able to Interpret electrical/ mechanical/ pneumatic/ hydraulics drawings to facilitate machine troubleshooting
  • Family mold synchronize machine with six-axis robot and automatic assembly machine
  • Automatic Machine Processes
  • Standard work document
  • Trouble shooting robot program ( Ex. Fanuc, Harmo)
  • Bachelor Degree Engineering in the fields of Electronic, Electrical, Mechanical
  • 2-3 years relevant working experience in a Manufacturing environment
  • Familiar with Vision Inspection System (Ex.Cognex, PPT Vision or Keyence), Programmable Logic Controllers (Omron), HMI (Hakko, Omron), Robotics (Denso, Fanuc), Pneumatics, hydraulics, sensors, stepper/servo motors and other motion control devices
  • Good knowledge in Automated Assembly Machine Control System
  • Has knowledge of electrical/electronic measuring equipment
  • Familiar with AutoCAD
  • Excellent in ENGLISH
  • Basic knowledge injection Molding
21

Senior / Experienced Electronic Engineer HI Resume Examples & Samples

  • Bachelor degree or above on electronics engineering or automation control related
  • 5 years of electronic product design experiences
  • Solid skills on Digital circuit, 32 bit RISC MCU/MPU application circuit design, familiar with USB, NAND, DRAM, Ethernet , UART, LCD, SPI, I2C more devices interface design, has ARM embedded system design experience
  • Basic programming skills on Assembly and C/C++ languages
  • Master in ECAD design tool, such as Cadence (Concept & Allegro)
  • Understand the EMC phenomena and know the EMC design rules
  • Good command on computer and common used software, e.g. MS office, MS project
  • Good English communication skills both oral and written
22

Electronic Engineer Resume Examples & Samples

  • Design, develop and document test procedures to validate functionality
  • Honours Degree qualified
  • Minimum 2 years of experience developing MCU based products
  • USB Devices
  • Analogue and Digital Design methodologies knowledge
  • Ability to work on several projects simultaneously
  • USB Compliance
23

Electronic Engineer Resume Examples & Samples

  • Work with Development Team and NPI team for new product development builds
  • Master in circuit and PCB design with Cadence, Altium Design, CAM350 and so on
  • Cooperation with other group, complete selection and design of the control system
  • Passionate about learning new skills and driving for results
  • Conduct design review to ensure a safe, robust, and reliable design
  • Excellent technical and communication skills, works well with other teams
  • Ability to work both independently, strong problem analyzing and solving skills
24

Electronic Engineer, Senior, T/p Resume Examples & Samples

  • Active secret clerarance
  • Electrical principal
  • Satellite communications systems
25

Electronic Engineer Resume Examples & Samples

  • Electronic circuits
  • Military radios
  • Electronics system verification
  • BS or equivalent + 2 yrs related experience, or MS + 0 yrs experience
  • Interpret schematics
  • Follow Technical manual
26

Electronic Engineer Resume Examples & Samples

  • To be the technical reference for every electric and electronic problems supporting, when asked, Production and Process Support in fixing complex situations
  • To be in charge of the implementation of every improvement found, in agreement with Reliability Engineers, Process Support and Production
  • To improve maintenance development projects in order to increase reliability and maintainability level of machines
  • To be in charge of all the Phases of those projects: ideas, development, implementation, benefit analysis and standardization
  • To control constantly maintenance datas given by Reliability Engineers (performance and costs) to found possible improvements and, according with Reliability Engineer, Process Support and Production, lead implementation
  • To define and improve maintenance strategies in order to increase equipment reliability, in collaboration with Reliability Engineers
  • To be the promoter of every possible action to diffuse his own knowledge in Process Support and Production
  • To organize, according with Process Support, Production, and Technical Training, OJT dedicated
  • Adheres to all EHS&S rules, policies and procedures
  • Keeps assigned work areas clean and orderly
  • Inspects and uses personal protective equipment as appropriate
  • University Degree in Automation or Electronics Engineer
  • 4-5 years electronic / electrical maintenance experience of production equipments
  • High level of knowledge about automation systems, programming tools, project management
27

Senior Electronic Engineer, Suzhou, SPS, SPS Resume Examples & Samples

  • Update and process engineering documentation in support of EWR implementation and ECN release
  • Update EWR status weekly in salesforce and publish separate weekly status reports or exception reports as required
  • Customer feature requests: design, build prototypes, complete verification and gain customer approval prior to release
  • Represent Sustaining to new NPI project teams. Share lessons learned from released designs for closed loop with new product designs
  • Identify innovations for improving functionality and quality of current company products
  • 3D design tool professional, Pro/E is preferred
  • Knowledge and experience designing plastic, metal and die cast parts, knowledge of molding structure/fabrication, injection process/defects analysis
  • Capable of performing tolerance analysis and DFMEA
  • Experience with technical documentation for engineering and manufacturing
  • Working knowledge of Change Management Process
  • B.S. degree in Mechanical Engineering with 3+ years new product development or sustaining experience. Or a master degree with equivalent project experience
  • Knowledge or experience with FEA is a plus
  • Knowledge and experience with DFM and fixture design is a plus
  • Knowledge of GD&T (geometric dimensioning and tolerancing) is a plus
28

Senior Electronic Engineer Resume Examples & Samples

  • Work with product manager and/or system engineer to understand the market requirements, architect and implement the electrical design for our spectroscopic instrument and/or customer specials with high quality assurance
  • Design the schematic involving EE tolerance analysis and verification plan mapping to the key performance and reliability requirement, finalize detail electrical design by reviewing with internal and external peers
  • Debug and verify the design function and performance to meet the requirements, complies with the Manufacturability and Serviceability, and achieve the cost/reliability target
  • Collaborate closely with the mechanical engineering team members to create product enclosures and cable harness with compelling design and form-factors that also meet regulatory, safety, environmental, reliability, thermal and interface standard (Ethernet, USB, etc.) compliance requirements
  • To work with the sourcing team and the suppliers to coordinate the manufacturing and provide detailed requirement for ICT/FCT of PCBA to make sure the PCBA from production line can meet design requirement
  • Follow engineering design process and product release procedures to transfer the design to internal and external production ensuring the successful product commercialization
  • Maintain the existing products released, fix the defects meet in the production or make improvements collected from internal/external customers
  • BSEE plus 8 years of experience or MSEE plus 5 years of experience in Electrical Engineering, Mechatronics or related disciplines
  • Experienced in mixed signal design using high speed/high bit DACs and ADCs for poor signal processing, and experienced in embedded system design, experience in Freescale iMx microprocessor and K serial of microcontroller is preferred
  • Strong passionate about electrical design and new product development, capable of learning quickly and continuously, strong interest and curiosity in new technology
  • Excellent hands-on skill and capable of systematical RCA and providing the mitigation and long-term solution
  • Strong verbal and written English communication skills
  • Experience in instrumentation, medical device automation or control industries
  • Good organizational skills being able to multitask on multiple development projects with shifting priorities
  • Familiar with knowledge of regulatory such as EMC/EMI, safety and RoHS
29

Electronic Engineer Resume Examples & Samples

  • Enters data into maintenance and supply databases. Can use hand tools and electronic
  • Communications equipment and systems; circuitry components; analog and digital computers; and control and test equipment. Installs, de-installs,
  • Troubleshoots, repairs, and performs preventive maintenance. Follows technical instructions, can read, interpret and follow schematic, engineering, and
30

Electronic Engineer Resume Examples & Samples

  • Design & develop digital and analog circuits & PCB layouts for embedded electronic devices for motor control, battery management, microprocessor controlled circuits, serial communication, and low power radio communication
  • Building and testing prototype circuits including soldering of SMT components and electrical debugging
  • Root cause analysis of system or component level issues in both design phase and production phase to ensure and maintain reliable products
  • Interface with firmware, testing, mechanical, regulatory, quality and operational team members to optimize design for compliance with product requirements and manufacturability
  • Engineering support throughout product lifecycle
  • Provide post production support including design improvements, identification of technical issues, cost reduction, and product refresh/redesign
  • Specify proper testing methods and equipment to validate designs
  • Analyze and develop specifications for components and function based on project requirements and cost criteria to determine project feasibility
  • When assigned as project lead, is responsible for overseeing and tracking all development activities for the assigned project, and ensuring completion on time and within budget
  • Digital and analog circuit design required
  • PCB design required, Altium Designer or similar
  • Proficient with Digital Multimeter, Oscilloscope, Spectrum Analyzer, Logic Analyzer, Signal Generator, and Network Analyzer
  • Component selection and specification
  • Hardware testing (design validation, FMEA, ALT, thermal analysis, etc.)
  • Knowledge of embedded firmware required, some firmware writing experience desired
  • Understanding of RF design and best practices
  • Understanding of EMI susceptibility and emission reduction techniques, EMC best practices and certification requirements
  • Knowledge and experience of regulatory compliance (UL, FCC, IC, CE, etc.) desired
  • Prototyping and soldering of SMT and through-hole components
  • Ability to manage tasks and time in an efficient manner
  • Ability to interact successfully, cross-functionally within all departments/regions of the organization
  • Project team leadership (no direct reports)
  • Strong communication skills written and oral
  • Microsoft Office including Excel, Word, Power Point, and Project
  • Bachelor’s degree in electrical or electronic engineering
  • Five or more years relevant work experience
31

Senior Electronic Engineer Resume Examples & Samples

  • Technical leadership and ability to assess designs for manufacturability and testability
  • Experience in identifying the root cause for manufacturing, assembly or test issues and ability to lead a cross functional team to solve complicated technical problems
  • Implements corrective actions including improving designs, specifications, or operator knowledge
  • Leading cross functional team to investigate and solve technical issues
  • Provide engineering support for production and maintenance activities to ensure smooth production
  • Innovative changes to improve the system in order to meet the requirement
  • Provides Electronic training and guidance to production & QC team members to accomplish production goals
32

Senior Electronic Engineer Resume Examples & Samples

  • Troubleshooting and maintaining computer controlled equipment
  • Analyze system requirements and customer needs to determine feasibility of project and develop system plan
  • Develop and perform operational, maintenance, for electronic products, components, equipment, and systems
  • Provide technical support and instruction to staff regarding equipment standards, assisting with specific, difficult in-service engineering using experience with PLC and HMI; robotics; and Industrial Networking including Interbus and TCP/IP communication protocol, RS485, RS232, and Ethernet interfaces
  • Inspect electronic equipment, instruments and systems to ensure conformance to specifications, safety standards, and applicable codes and regulations
33

Power Electronic Engineer Resume Examples & Samples

  • Power electronic converter circuit analysis and design
  • Working understanding of circuit design and operation, and of principal components
  • Design drivers for converter performance, like efficiency, power density, failure rate, safety
  • Own ability to simulate & design parts of product
  • Circuit design to control HF currents
  • Design according to standards. Verification of compliance
  • You are process oriented and have a structured way to work
34

Electronic Engineer Resume Examples & Samples

  • Major in electronics technology, automation or automatic control
  • Bachelor or upward of, CET six level with at least 3 years R&D experience, have experience of SCH design/PWB Layout by Altium, DSP design, master analog and digital circuit
  • Good interpersonal and communication skills, must be able to communicate effectively both in written and oral english in a global team
  • Positive attitude and present key data effectively
  • GB preferred (GE employee only)
  • EEDP graduated
  • Master DSP/analog circuit design
35

Electronic Engineer Resume Examples & Samples

  • Support System Operations with O&M and project tasks primarily focusing on LAN/WAN and Carrier Ethernet. Tasks include provisioning switches and routers, Cisco ONS 15454’s, Channel banks, and Ciena Z33’s/Z77’s
  • Collaborate with Planning, Design, Construction, and field maintenance organizations to address O&M issues and understand their needs in developing and completing projects. Tasks include active participation in meetings and completing tasks that are either assigned or volunteered
  • Assist in system design and O&M issues relating to telecommunications backbone with a focus on packet Ethernet and WAN with mission critical reliability requirements and the required support systems. Tasks include documenting architectural designs using Visio, evaluating systems design with a NERC-CIP perspective, and working with diverse teams to complete schedule-driven targets
  • Test and develop procedures to publish for compliance. Tasks include developing or editing FISMA/NERC-CIP documents related to devices used on the telecom backbone and endpoints and working with compliance teams to meet schedule-driven targets, such as Automatic Fiber Monitor System (AFMS), Telecommunications Network Management System (TNMS), and Dispatch Telephone System (DTS)
  • Provide clear documentation for training proposes, once project tasks related to Carrier Ethernet and WAN are completed. Tasks include utilizing finalized training documents for personnel training and completing knowledge transfers related to Class of Service (CoS) and traffic engineering work
  • Represent System Operations in Technical Work Groups, such as Equipment Specifications, Maintenance Standards & Procedures, New Systems / Equipment Evaluation, as requested and required by compliance databases
  • Represent Grid Operations during Project Review Design (PRD) reviews; communicate system requirements and information to the Telecom Design Work groups, Team Leads, and Planning in order to coordinate group strategies
  • Bachelor’s degree in Electronics/Electrical or Telecom Engineering is required
  • 10+ years experience in Telecommunication Engineering or related field is required
  • 5+ years experience on project teams developing telecom and / or network systems is required
  • Proficiency in Microsoft Office 2010 including but not limited to: Word, PowerPoint, Outlook and Excel is required (MS Office 2010 proficiency is required)
  • 5+ years of Carrier Ethernet and/or network systems programming/troubleshooting experience is strongly preferred
  • Cisco Certified Internetwork Expert (CCIE) certification is strongly preferred
  • 5+ years of knowledge of computer network and control systems concepts, principals, and practices applicable to components and facilities found on a regional transmission or utility system is highly desired
  • This position requires expert skill in
  • Telecom/Network systems engineering principles and concepts with minimal guidance
  • Active participation with technical team coordination
  • Technical evaluation and evaluation process of control system technologies
  • Developing compliance program to meet NERC CIP and FISMA standards
36

Electronic Engineer Resume Examples & Samples

  • Manage service engineering projects with third party partner
  • Ensure tools released meet HUE and are fully documented
  • Engage appropriate cross functional teams to resolve service issues (engineering, purchasing, quality, marketing etc.)
  • Seek and deliver service breakthrough projects
  • Drive HOS culture
  • Lead MCPR reduction project
  • Validate QMS adherence
  • A minimum of 3 years experience in Quality Assurance/Process improvement
  • BS, Electronic, Electric Engineer degree or equivalent experience
  • 3-5 years in service / engineering environment
  • Worked with Business/Quality/Productivity leaders to identify and implement new project ideas
  • Owned performance metrics that accurately reflected the current state of a project
  • The candidate must be able to work independently across functions at multiple levels
  • Hardware and software knowledge in relevant environment
  • Service & Repair technical experience
  • High end user of MS Excel and other MS Office programs
  • Six Sigma Green Belt certified preferred
  • Lean qualification and experience or training for qualification is a major plus
  • Fluent in English language (verbal and written). Additional languages would be a plus
37

Electronic Engineer Resume Examples & Samples

  • Development of electronic µC board
  • Concept, simulation and PCB design
  • Optimization with respect to system costs
  • Implementation, bring up and verification
  • Modifications of firmware and automation SW
  • Measurement campaigns and documentation
  • Close interaction with Hardware and Software development team
  • Participation in technical reviews and ensure the quality of deliverables
  • Experience in design of electronic circuits
  • Programming skills (µC and test automation)
  • Understanding of overall HW-SW architecture, µController systems and boards
  • Good team player and have passion to win attitude
  • Have good English skills (German or French would be an asset)
38

Senior Electronic Engineer Resume Examples & Samples

  • Create, execute and document verification test plans to ensure products meet market and customer requirements
  • Design hardware and/or embedded firmware for new product developments and support existing products
  • Project planning and documentation including Design Specification, Test Specifications, Product Specifications, cost estimates and project scheduling
  • Field testing and interfacing with customers, as required
39

Electronic Engineer Resume Examples & Samples

  • Develop STRATTEC’s capability in electronic hardware design and system developments such as wireless, low power applications, battery operated devices, and motor/solenoids type products
  • Investigate the latest wireless applications in automotive and consumer products with an awareness of the connectivity and/or security industry
  • Investigate new technologies and develop the next generation platforms that utilize today’s wireless and low power technologies
  • Advise management in technical direction to adapt new technologies and strategy based on market-driven data
  • Lead remote team members across the globe such as China, India, and Europe
  • Coach and mentor other engineers on understanding and utilizing new design practices and methods such as schematic capturing, PCB layout, and SW implementations
  • Hardware Engineer that is experienced in wireless technologies such as Wi-Fi, Bluetooth, and NFC technologies or similar
  • Candidate must demonstrate expertise using Schematic Capture experience. PCB CAD tools such as Orcad, Altium, Mentor Graphics, PADS, HFSS, etc
  • Proficiency in using lab equipment including Network Analyzer, Signal generator Oscilloscope, etc
  • Prepare technical documentation including product specifications, layout instructions, test procedures, etc…
  • Motor and solenoid drive circuits (BJTs, MOSFETS, H-bridges, etc.)
  • Expertise in connection technologies, actuators, sensor technology
  • Knowledge in diagnostics and communication systems (CAN LIN/K-Bus, flashing via bus, …)
  • Excellent communication skills and ability to work in a team environment required
  • Ability to research and develop new technologies
  • Minimum of 5 years experience working with electronics system designs
40

Senior Electronic Engineer Resume Examples & Samples

  • While performing the duties of this job, the employee occasionally works near moving mechanical parts and is occasionally exposed to risk of electrical shock
  • Will be required to work in a clean-room environment and will need to wear special garments
  • A Bachelor’s of Science degree (BSEE preferred) in a relevant engineering discipline and a minimum of four (4) years of related electronics engineering experience is required
  • PLC Programming experience is highly preferred
  • MS degree preferred in a related engineering discipline is preferred
  • Significant complex level engineering experience is required
  • Financial background experience in the field of Operations would be beneficial
  • Experience in the medical device industry would be an asset
  • Must possess more than a basic understanding of engineering theoretical fundamentals and experimental techniques
  • Strong English communication skills, written and oral is required
  • Knowledge of drafting software systems such as AutoCad and Solidworks is required
  • Knowledge of statistical software packages such as Minitab a plus
  • Project Management skills a plus
  • Process Excellence tools such as Lean and Six Sigma certifications a plus
  • Business/financial acumen is highly preferred
  • This position is located in Irwindale, CA and may require up to 15% travel domestic and/or international
41

Electronic Engineer Resume Examples & Samples

  • Develops and maintains software applications and GUI application based on C and C++ code
  • SW efficacy and reliability evaluation
  • Evaluation of the percentage of SW developed in-house VS offshore
  • Specify system requirements for external software or hardware suppliers
  • Achieving the targets committed to the supplier
  • Prepares technical/functional specifications from system requirements documents and work with various groups to define interfaces and software requirements
  • Evaluation in term of quality/accuracy of the released documentation
  • Validate the integration of internal and external supplier’s software modules into the electronic platform
  • Work closely with the other engineering teams for the design and the research of optimal solutions during the development of a product
  • Achieving the common Engineering Dpt. targets
  • “customers” feedback
  • Assist testers engineers or other department (eg. production) with problem analysis and resolutions
  • Number of “bugs” reported and “bugs” solved
  • Experience with developing real-time embedded machine control software using C and C++
  • Experience with Object Oriented software development
  • Experience with defining software and hardware interfaces
  • In depth knowledge of J1939 and ISO11783 CAN communications
  • SQL database development and interfaces
  • Degree in Electronic Engineering, Computer Engineering or Computer Science
  • 2 years of experience in embedded systems software development
  • Desirable a previous experience in development of vehicle/automotive control systems or agricultural equipment
42

Senior.electronic Engineer Resume Examples & Samples

  • Master degree or equivalent bachelor degree in Electronic engineering
  • A minimum 5 years working experience, at least 3 years PCB design and program experiences
  • Understand PCB design, analog and digital electronics experience is a plus
  • Be good at programming C code, VC, HDL language
  • Be familiar with Protel199SE/AD6 and OrCAD software
  • Proficient in office software, AutoCAD. ERP software experience is required, SAP is preferable
  • Basic command of oral and written English
  • Be able to work independently and proactively with team work spirit, good ability of problem solving
  • Be able and willing to work under pressure, be positive and optimistic
43

R&D Electronic Engineer Resume Examples & Samples

  • Participate in the development of material sub-components for the other emergency products global platforms
  • Participate in the creation of validation plans for sections under his/her responsibility
  • Write the technical documents required during all the development phases
  • Knowledge in lighting products, such as LED and previous technologies
  • Knowledge in BMS protocol (Bacnet, KNX, Modbus)
  • Occasional travelling possible
44

R&D Electronic Engineer Central Battery Systems Resume Examples & Samples

  • Design modular and innovative electronic circuits as per the requirements defined by the architect of the central battery systems platform
  • Work with suppliers to identify optimal components, both in terms of performance and budget constraints
  • Ensure an understanding of the customers’ needs as well as the various codes and standards which can impact the designs
  • Participate in project planning and follow-ups with other involved members
  • Participate actively in design review meetings
  • Ensure that the designed products meet the customers’ needs, as well as the quality and safety standards
  • Provide technical support to engineers participating in projects, as well as to regional engineering teams
  • Functional English required, spoken and written, as well as a second language, an asset
45

Senior Electronic Engineer, Suzhou, SPS, SPS Resume Examples & Samples

  • Must have experience in analog and digital circuit designing and debugging
  • Familiar with Freescale, Renesas development platform
  • Solid understanding of design for manufacturability process
  • Solid knowledge about electrical system design and testing set up
  • Electrical Simulation experience is plus
  • Effective communication skills and strong ownership
  • Good at speaking and writing English
46

Electronic Engineer Resume Examples & Samples

  • Strong hands­on lab experiential testing skills and schematic design
  • Strong experience in analog circuit / pre­driver for Mosfet design. Familiar with solenoid or motor control
  • Basic quality and development process knowledge
  • Cooperating skills and communication skills with internal & external customers
  • At least 3 years in electronic design (automotive preferred)
  • Fluent in written English
  • Strong hands-on lab experiential testing skills and schematic design
47

Senior Electronic Engineer Resume Examples & Samples

  • Designs and tests hardware, firmware, and software
  • Designs electrical systems with lasers, drivers, motors, controllers, sensors, etc
  • Designs and makes system block diagrams and drawings (including drawings for sub-systems, cables, and interfaces)
  • Develops control and test software using LabView and other development tools
  • Designs and sets up test systems and fixtures
  • Collects, compiles, and analyzes data from different test systems and prepare reports
  • BS or MS in an Electrical Engineering or equivalent
  • Minimum 5 years of relevant experience
  • Proficiency with LabView
  • Knowledge of power electronics
  • Basic knowledge of analog and digital electronics
  • Knowledge of motors and controllers
  • Knowledge of control systems (PID, feedback, etc.)
  • Knowledge and experience with safety requirements (laser safety, electrical system safety, interlocks, shutters, etc.)
  • Knowledge of industrial interfaces and standards (RS-232/485, EtherCAT, PLCs, etc.)
  • Hands-on experience with electrical systems (cables, connectors, etc.) and ability to read and generate drawings
  • Hands-on experience with sensors and interfaces
  • Hands-on experience with electronic components, boards, sub-systems
  • Hands-on with Lab equipment (oscilloscopes, multimeters, power supplies, generators, etc.)
  • Soldering and lab skills (wiring, testing, etc.)
  • System design and hands-on experience with laser systems
  • Analog electronics
  • Digital systems and microcontrollers, especially Cortex-M
  • Experience with scanning systems
  • Familiarity with CE certifications and requirements
  • Knowledge of C/C++, RTOS
  • Understanding the design flow and principles of electronic design including schematic, board design, routing, PCB manufacturing (Experience with Altium Designer is a big plus)
48

Electronic Engineer Resume Examples & Samples

  • Participate in the project teams for new product development and being responsible for the industrialization of electronic parts for shaver, tooth bursh and mother health care etc. products
  • Responsible for the industrialisation of the PCBA’s of shaver and other products at CL Zhuhai’s preferred suppliers
  • Responsible for trouble-shooting of electronic parts of the shaver and other products during the new product introduction phase (NPI)
  • Responsible for coordinating with the venders of PCBA and ESE Dept. of CL Drachten
  • Give engineering support to Purchasing Dept. for sourcing alternative source of electronic components
  • Give engineering support to Production Dept. after the product release running into mass production
  • Investigate the FCR case from production and find a fundamental solution or work with CoC to find the solution
  • Investigate the FOR case and find a fundamental solution or work with CoC to find the solution
  • Initiate the change management documents for the engineering changes about electrical/electronic parts of shaver and other products
  • Publish ECN/TAN for technical change
  • Support ESD regulations and deployment in production, create an ESD proof environment and give inputs to the PFMEA’s of all new NPI projects to safeguard the ESD protection during the production processes
49

Senior Electronic Engineer Resume Examples & Samples

  • Design of electronic modules for CL products, primary for the Shaving and Grooming product in new product development project
  • Support electronic module upgrade, debug, optimization, cost reduction, quality improvement in product lifecycle management
  • Build up product electronic requirement from overall product requirement management
  • Translate technical requirements into product concepts and electronic designs
  • Design and test the modules or components, to ensure reliable, efficient, and user-friendly products
  • Lead new product introduction process (mass production) for electronic modules, with cross functional team
50

Signal Integrity Electronic Engineer Resume Examples & Samples

  • BS in Computer Science, Electrical Engineering, Computer Engineering, or equivalent
  • Proficient in SI/PI simulation using HFSS/ADS/PowerSI/HSPICE
  • Strong hardware/high speed PCB design skills
  • Excellent organizational, written and oral English communication skills
  • 25G/28G experience is a plus
51

Senior Electronic Engineer Resume Examples & Samples

  • 4 – 6 years related experience
  • Attends meetings and works effectively with other staff members to resolve manufacturing and equipment problems
  • Coordinates with outside contractors on project design and programming
52

Power Electronic Engineer Resume Examples & Samples

  • 4+ plus years of understanding and working knowledge of switching power converters
  • Applicant must be able to develop concepts and product designs that are on the cutting edge of technology in the areas of high current, high power (>25kW), low voltage, high efficiency/density, converter designs
  • Applicant must have the ability to design AC-DC and DC-DC Converters
  • Applicant must be able to move from concept to architecture to design
  • Requires knowledge of multiple conversion topologies (flyback, forard, push-pull, etc) and the ability to simulate and model designs
  • Applicant should also be familiar with EDA tools
  • Knowledge of SPICE simulation tools is a must
  • Knowledge of the Mentor Expedition/DxD design and analysis suite a plus
  • Applicant should also know how to develop test plans, procedures and test solutions
  • Understanding and knowledge and characteristics of magnetics (including inductor/transformer modeling), magnetization inductance, magnetization current, leakage inductance, intra-winding and inter-winding capacitance, self-resonant frequency, characteristics and limitations of magnetic cores, core saturation, core loss, high frequency losses, core reset, winding techniques for optimization of desired magnetics, and design of current transformers
53

Electronic Engineer Resume Examples & Samples

  • BS or Master degree in electronic
  • 2 or 3 years working experience in electronics
  • Familiar with hardware and software in Electronics control system
  • Good command of English language both written and spoken
54

Electronic Engineer, Suzhou, SPS, SPS Resume Examples & Samples

  • B.S. in Electrical/Electronic Engineering, Computer Engineering, or closely related field
  • 3+ years work experience in product design or a sustaining role
  • Experience in analog and high speed digital circuit design, power supplies, PCB design and debugging
  • Experience with best practice circuit designs for EMI/ESD compliance
  • Familiar with EDA (electronic design automation) tools, Mentor Graphic is highly preferred
  • DFSS certification is a plus
  • Familiarity with mobile computing products is a plus
  • Experience with ISC and configuration management is a plus
55

Electronic Engineer Resume Examples & Samples

  • Microprocessor microcontroller design; Printed wiring board layout; Firmware design; Project leadership and chief contributor on new designs; Documentation and working with a development team (50%)
  • Evaluate design components of existing Thales designs and recommend product improvements (15%)
  • Generate electronics production drawings (10%)
  • Interface with electronics and mechanical designers as part of a design team (10%)
  • Design, assist, and execute electromagnetic interference qualification tests (5%)
  • Planning, implementing, and administering engineering programs and projects (5%)
  • Other duties as assigned by Team leader (5%)
  • Ten (10)+ years’ experience in Electrical Engineering
  • Experience with audio, video, digital DC/IF, and analog design, documentation and working with a development team
  • Previous design experience
  • Knowledge of avionics certifications processes and requirements preferred but not required
  • Knowledge of Federal Aviation Regulations governing avionics preferred but not required
  • Ability to follow instructions
  • Design and procedure documentation skills
  • Experience with electronic test equipment
  • Experience with schematic capture tools usch as Orcad
  • Proficient with Microsoft software such as Word, Excel, Outlook, PowerPoint, Access and Project
  • Excellent written and verbal communications skills in English
  • Knowledge of standard interfaces
56

Lead Electronic Engineer Resume Examples & Samples

  • Interpretation and communication of industry and international codes and standards
  • Interpretation and implementation of client standards and global practices
  • Ensuring and verify technical compliance of products with specification, codes, standards, legislation and client technical requirements
  • Engagement with all relevant stakeholders (internal and external) developing and maintaining effective relationships/partnerships in order to meet program schedule
  • Generation and / or review of technical procurement specifications, parts and document suites
  • Product and task ownership including the generation of robust design files to demonstrate due diligence
  • Ensuring that product design conforms with field proven or qualified technologies
  • Promoting Compliance, Quality & EHS integrity through developing succinct procedures, work instructions, product and process related documentation and creatively promote their use
  • Professional representation of GE in client and vendor focused design review
  • Technically drive contribution to vendor selection processes
  • Continuously contribute to department and site goals and objectives
  • Act as a change agent in the business with energy, passion & enthusiasm to support business activities and alignment of processes to meet business needs
  • Takes responsibility in working across global SPS Engineering Teams to deliver solutions to assigned work packages
  • Demonstrates ability to multi-task and work to agreed schedules and be ‘commercially aware' in engineering solutions
  • Implement initiatives and best practices to continuously improve the Inquiry to Order (ITO) & Order to Remittance (OTR) responsiveness of the organization to customer and business needs
  • Working closely with the New Product Initiative (NPI) team to support the delivery of NPI programs and assisting in defining the technology gaps to drive future NPI alignment
  • Management and review of outsourced (internal or external) work packages and removal of barriers to achieve success
  • Responsible for demonstrating adherence to schedule and budget commitments for assigned packages of work
  • HND or Degree in Engineering OR International equivalent and work experience on closely related equipment
  • Knowledge of PCB design and schematic capture
  • Proven experience in process verification and validation methodologies in relevant / similar environments
  • Demonstrated understanding of product development lifecycles, design and document change control
  • Self-motivated and able to work both individually and as part of a team
  • Ability and willingness to work in range of environments to include but not limited to industrial facilities, manufacturing facilities, and power industry facilities
  • Proven ability to achieve business’ targets
  • Strong technical problem solving and report out
  • Resilient & persistent under all circumstances
  • Valid driver’s license and satisfactory driving record
  • Availability to travel internationally for project needs and for short term assignments
  • Experience and knowledge of the design and operation of Production Control Systems
  • Continuous improvement mind-set
  • Experience of working in a global team
  • Electronic simulation and analysis
  • Computer base knowledge (MS Word/Excel/Outlook/CAD)
  • Possess excellent analytical and problem solving skills
  • Display confidence in a fast-paced work environment
  • Ability to work unsupervised
  • Possess excellent communication skills both written and verbal
  • Outstanding creativity and ability to communicate ideas
57

Senior Electronic Engineer Resume Examples & Samples

  • Develop projects through Pro Launch System
  • Provide technical soundness of design decisions and product changes to facilitate optimal product performance, manufacturing process, reduce cost, improve quality and accommodate special customer needs
  • Lead development of IoT products and systems
  • Prevent and correct product performance issues
  • Support quality specification of existent products
  • Responsible to update, generate reports according to engineering and customers’ requirements
  • Request capital as needed in projects
  • Monitor breaker testing results and performance levels and align product enhancement activities to drive a reduction in third party holds and increased endurance and design margins
  • Interface with test lab personnel and other engineering teams to evaluate and resolve product issues in the field
  • Use of PRO Launch on new product development and product line transfer
  • Minimum of 2 or more years of experience designing and developing software and hardware (digital and analog electronic circuit design)
  • Experience in the development of IoT products/tools
  • Candidate must be legally authorized to work in the United States on an ongoing basis without company sponsorship
  • Programming languages( C or C++, Java, Linux)
  • Strong computer science fundamentals including algorithms and data structures
  • 1+ years of hands on experience with any public cloud including Microsoft Azure, Amazon Elastic Cloud, AWS, Cloud Foundry, GE Predix, Ayla IoT platform, IBM bluemix or other relevant IoT cloud
  • Computer knowledge: MS Office, Familiarity with CAD tools – PROE, SolidWorks, AutoCAD or equivalent (and drawing interpretation skills), AS400
  • Knowledge of SPC (Statistical Process Control), Lean, 6 Sigma
58

Senior Electronic Engineer Resume Examples & Samples

  • Design of innovative Microprocessor-based control systems
  • VHDL FPGA firmware development
  • Support the efficient production, test, qualification and integration of new designs
  • Timely delivery of electronics solutions meeting project requirements
  • Cradle to Grave Ownership – from defining requirements to product introduction
  • Produce high quality design documentation
  • Mentor Graduate/Junior members of the team
  • FPGA development with VHDL/Verilog and simulation tools
  • Digital Logic
  • Stepper and DC motor control
  • Switching Power Supply Design
  • Sensor Technologies
  • Schematic Entry
  • Modelling & Simulation Tools
  • Knowledge and appreciation of multilayer PCB design
  • EMC compliance techniques
  • Good understanding of test methods
  • Strong knowledge of electronics assembly processes and test methodologies
  • An ability to manage time effectively and work within tight deadlines
  • Team orientated
  • Knowledge of C/C++, Matlab, National Instruments tools would be an advantage
  • Minimum 2.1 or higher (or equivalent) in one of the following engineering disciplines: Electronics, Physics or related subject
  • 7 years’ experience in an electronics design environment
59

Senior Electronic Engineer Resume Examples & Samples

  • Bachelor Engineering or master in Electronics
  • 5-10 years electronic design and engineering experience, preferred if in the domestic appliances market
  • Excellent communications skills, also in English (both written and spoken) and Cantonese
  • Prior consumer or automotive experience. Large production volumes
  • Understanding of EN-standards and IEC/UL normative for domestic appliances
  • Basic knowledge of batteries and Battery Management Systems
  • Basic knowledge of Universal and BLDC motors
  • Ability to speak professionally directly with team members, suppliers, and stakeholders
  • Deep knowledge of analog circuits, power circuits, and discrete components
  • Deep knowledge of PCB/PCBAs manufacturing process, and design documents and procedures
  • Ability to read, understand, and implement a design from specifications
  • Altium CAD, LTSpice (preferred)
60

Electronic Engineer Resume Examples & Samples

  • Review information provided by others in specific areas under close supervision. Extract and develop conclusions from given information
  • Perform research to identify trends, weaknesses and opportunities for improvement. Create reports and explain conclusions drawn from research
  • Must be capable of identifying facility, systems, equipment and utility (FSEU) from construction drawings and specifications
  • Work with others to develop efficient processes using flowcharting techniques and other process improvement tools
  • Asset Management - Make clear and consistent entries in various databases. Maintain database records consistently
  • Review, approve and sign documents, i.e. Information Requests (IRs)
  • Understand the relationships between FSEU, Engineering and the Business Office
  • Participate as a member of the Maintenance Action Request (MAR) Initiative Team
  • Review and identify MAR requirements
  • Interact with Configuration Management (CM) and Activation & Turnover (A&T) staff
  • Develop and write or update procedures, instructions and desk guides for activities performed
  • Able to train Maximo users on Asset/PM/Job Plan Module utilization, standardization of entries. Manage data integrity through review and correction process
  • Establish and maintain a filing system or databases as needed for tracking project status. Utilize the shared folders for storage for availability to others
  • Interface with customers in design reviews, Configuration Control Boards (CCBs) and technical working group meetings to comply with requirements and specifications
  • SharePoint and/or Maximo experience a plus
61

Senior Electronic Engineer, Rf-vhf Resume Examples & Samples

  • Design and productize leading edge, high efficiency RF power generation equipment for thin
  • Analyze design variability for 4 statistical design margin in manufacturing
  • Thoroughly document and explain designs to peer reviewers, internal and external customers
  • Oversee and participate in test-to-specification and reliability qualification tests
  • Experience with circuit simulation tools (e.g. SPICE, Agilent ADS, Microwave Office, etc)
  • Ability to understand and manage tradeoffs between cost, performance and power density
62

Senior Electronic Engineer Resume Examples & Samples

  • Experience with Mentor Graphics (DxDesigner, Expedition)
  • Good understand EMI/EMC knowledge, good at EMC control
  • Familiar with DFT/DFM as design guideline
  • 3+ years (Master)/5+ years(Bachelor) post graduate experience in producing PCB designs for volume manufacturing
  • Able to work and travel in global collaborating environment with intensive challenges
63

Electronic Engineer Resume Examples & Samples

  • Design reliable and structured Firmware in MCU
  • Conduct functional and environmental tests for new designs or modified existing designs to evaluate circuit performance
  • Responsible for cost effective design decisions
  • May prepare proposals, personnel and cost estimates, and work schedules to meet completion dates and technical specifications
  • Define optimum design criteria and operating characteristics of subassemblies and complete instruments
  • Prepare documentation such as sourcing code, firmware structure, schematic diagrams, test procedures, theory of operation, and purchased part lists, instruction manuals and related information
  • Maintain current knowledge regarding new developments and trends in applicable engineering field
  • Finish other related duties on time as assigned
  • Bachelor or above degree in Electronic Engineering, Computer Engineering or equivalent
  • 5 years design experience on mixed signal circuit design. Engineer with 3 years design experience could be considered if other items fit well
  • Familiarity in with MCU, analog circuit and peripheral circuit design
  • Familiarity in with Firmware design
  • Proficiency in Cadence or Protel
  • Excellent team work spirit
  • Familiarity in analog hardware design
  • Proficiency in Cadence
  • Equipment design experience under lean manufacturing environment
  • Fluent communication in both Chinese and English
  • Familiarity in PC software design
64

Electronic Engineer Resume Examples & Samples

  • Formulate and analyse high level requirements to develop engineeriung solutions
  • Prepare system level designs for new product developments
  • Create detailed engineering work plans and requirements /specifications
  • Provide detailed electrical & electronic engineering design to meet project requirements directly, or, via others, and meet project timescale
  • Ensure that designs are properly verified according to engineering procedures and comply with relevant regulatory standards
  • Approval of designs for clinical release
  • High complexity electronic and electro-mechanical systems
  • High speed precision control systems
  • Experience in VHDL
  • Safety cricitcal systems
  • Highly regulated development and product environment
  • Knowledge of embedded systems and control communications
  • Product development thorugh all phases of the engineering lifecycle from concept to manufacture
  • Academic qualification, for example, a good degree in a relevant engineering discipline
  • Ability to demonstrate thorough engineering approach to problem solving
  • Experienced in design capture using ECAD tools
  • Proven ability to follow tasks through to full conclusion
65

Electronic Engineer Resume Examples & Samples

  • Excellent understanding of analogue, digital and power supply design fundamentals
  • Experience in designing and testing for EMC
  • Knowledge of industrial communication protocols and understanding of the oil and gas industries and relevant standards for intrinsic explosion safety (a.o. ATEX) is a very strong advantage
  • Hand on FPGA/CPLD programming experience is a plus
  • Firmware on hand experience is also preferred and a plus
  • Ability to follow design and development processes, structured approach
  • Bachelor/Master Degree in computer science, Electronic, automation etc
  • 2+ years (Master)/4+ years(Bachelor) post graduate experience in producing hardware designs for volume manufacturing
66

Senior Power Electronic Engineer Resume Examples & Samples

  • Power electronic converters in relevant power and voltage class
  • Bachelor/master in a relevant area, i.e. power electronics, electrical engineering
  • You have a proactive personality, good communication and stakeholder management
  • You should believe in and comply to our values of Collaboration, Simplicity and Accountability
67

Power Electronic Engineer Resume Examples & Samples

  • Bachelor/Master degree in related Power Electronic engineering background; Bachelor over 3-5 years or Master over 1-3 years working experiences in power electronic design
  • Experience designing and developing Boost Converter / Buck Converter / 3-Phase Inverter Design > 10 kW topology application, etc. PWM rectifier control, and multi-level power converter design experience is preferred
  • Familiar with digital control on power electronic system, and relative simulation techniques like Matlab, Simulink, PSpice, LT Spice, etc, experience on Power Electronics Algorithm design is preferred
  • Proficient in Cadence tool for schematic design and PCB layout design, with solid PCB layout experiences
  • Consolidated knowledge in EMC/EMI, magnetic component calculation, thermal and signal integrity design and analysis capability
  • Knowledge in quality assurance, good experiences of design for reliability, working experience in area of medical devices preferred
68

Electronic Engineer Resume Examples & Samples

  • Good knowledge in using simulation tools such as Hyperlynx for PCB design
  • Familiarity with IPC specification is a plus
  • Well know layout for analog, digital, hybrid signal and high frequency signal
  • Familiar with PCB fabrication and assembly processes
  • Good team work spirit and communication skill, strong design review and problem solving ability
  • 2+ years (Master)/4+ years(Bachelor) post graduate experience in producing PCB designs for volume manufacturing
69

Electronic Engineer Resume Examples & Samples

  • Develop unit and integration level test plans and perform associated testing both on bench and in target applications
  • Implementation of hardware designs to automotive quality expectations utilizing existing development environments and processes
  • Work with production to ensure design for manufacturing and test criteria are met
  • Interface as required with external development partners
  • Support meetings internally and with customers to discuss test plans and test issues
  • New specification analysis together with the mechanical design department
  • Develop schematics for electronic components given the dimensions and taken the specifications from the customer
  • PCB Layout development, follow and test first PCB prototypes working with software developers
  • Work with the team to attach new business on electrical product, like Ignition Coil, Heaters. Provide suitable technical solution to meet customer requirement
  • BS degree in electrical/electronic engineering or equivalent, M.S. Preferred
  • Min 3 years’ experience in electronic design in an automotive environment
  • Design of high voltage products (450V to 1200V)
  • Experience designing with IGBTs
  • Experience of creepage and clearance specifications for high voltage design IEC 60664
  • Experience with 8-bit microprocessors
  • Knowledge of CAN & LIN Bus vehicle communications
  • Knowledge of circuit simulation tools / SPICE
  • Experience of working with external development resources
70

Lead Power Electronic Engineer Resume Examples & Samples

  • Generate tender specific documentation
  • Validation of key component ratings (Size of the Valve, Calculation of losses, RAM study, Type test specification)
  • Working against customer specification at tender stage (Clause by Clause, Risk analysis)
  • Integration with other engineering departments for product definition (System design, Main Scheme, Layout, Commercial)
  • Circuit simulation for design and future testing as part of project awarded
  • Product approval, including routine and type test specifications and pre-commissioning testing
  • Product support during complete life cycle (From Tender to Project commissioned)
  • Travel across the EU and other countries for customer meetings during tender stage
  • Power electronic converters (motor drives, such as HVDC and FACTS applications)
  • High power electronic components (IGBTs, thyristors, passive components)
  • Thermal Design (loss calculations, heatsink specification liquid cooling)
  • Specification & report writing
  • Design & type testing programmes
  • Requirements capture
  • Risk analysis
  • Able to work to deadlines with high quality
  • Good technical communication
  • Independent and team worker (Pro-Active)
  • Precise documentation
  • Prior experience of electrical transmission industry
  • Thermal and hydraulic design (e.g. loss temperature calculations, thermal modelling, thermal characteristics of material, pressure drop calculations)
  • Power Electronic control & protection
  • Ability to coordinate and lead a small group of engineers
  • Good at sharing knowledge and experience
71

Electronic Engineer Resume Examples & Samples

  • Work as a member of manufacturing engineering department, and responsible for electronic & manufacturing tasks
  • Work closely with US/Singapore electronic team and EMS suppliers for PCB/PCBA issues
  • Develop & maintain testing fixture for PCBA and product, prepare procedure or work instruction, and provide guidelines for operators
  • Review engineering change request and EQ for electronics
  • Responsible for the yield of certain production lines, and offer daily support to the lines for assembling, testing, process and equipment issues
  • Conduct analysis, experiment and offer solution for product quality issue
  • Analyze the returned goods from customer and address customer’s complaints
  • Support the upgrade of automatic testing system
  • Participate in continuous improvement projects for lean/digital/automation
72

Electronic Engineer, Senior Resume Examples & Samples

  • Candidate will have 9-plus years experience associated with Prophet and Prophet-Enhanced Systems
  • Performs sustainment maintenance to include removal and replacement of components for repairs, installs, de-installs, fault-isolation, ability to read and interpret schematic and engineering drawings and diagrams, performs operational test and return to service checks
  • Inputs maintenance and supply actions into maintenance databases, represents the company well to customers, meets customer needs and expectations with contract requirements, and reports status and issues to Site Lead
  • BS or Equivalent + 5 yrs related experience, or MS+3 yrs related experience
  • Must have a current and Secret clearance
  • Must have Electronics Circuits, Electronics, Troubleshooting experience
  • Nice to have Data input, hand tools, mechanical skills
73

Electronic Engineer Resume Examples & Samples

  • Maintains smooth operation of local area, worldwide, and virtual private networks (VPN). Plans, evaluates, designs, and coordinates installation and/or reconfiguration of hardware and software elements of data and/or voice communication network
  • Maintains technical expertise in all areas of networks and computer hardware and software interconnection and interfacing, such as routers, switchers, firewalls, hubs, bridges, gateways, etc. May propose solutions to management to ensure all communications requirements based on future needs and current usage, configuring such solutions to optimize cost savings. Prepares or ensures that appropriate network documentation exists, including operational instructions
  • Provides regular monitoring and network analysis regarding short- and long-range planning for in-house systems. May coordinate third-party maintenance for network equipment
  • May design network or portion of network that includes selection and recommendation of hardware and software packages
  • Network analysis experience
  • 3-7 years of experience
  • HS diploma or above
74

Electronic Engineer Product Development Engineering Resume Examples & Samples

  • Responsible for electronics-related system/product design, Work with mechanical/system engineer to deploy system design CTQ to electronic sub-system design CTQ, set up measurement and validation plan
  • Provide solution of electronics control/monitor/smart requirement, with the feasibility analysis and cost analysis etc., fully meet the market and regulatory requirements
  • Participate and develop test standards and test specifications for system and components, and validate electronics-related unit/components to QTP/VTP to ensure design CTQ are met
  • PCB design, protocol draft, deliver drawing and instruction for manufacturing, practice the DFMEA, Design for Cost & DFM/DFR
  • Participate and provide the new product training or communication to TS and marketing during the new product development process
  • Collecting related market or policy information, also master the information from competitors and do necessary analyze, and bring any data support for the sales policy of company
  • Coach the junior engineer
  • Bachelor degree in an Electronics related or artificial intelligence engineering discipline
  • Familiar with standard of electrical regulation and safety
  • At least 5 years application design experience electronic control system, covering Protel_schedit, PCB layout, MCU application design, programming with C or python and so on assembly language, debug, familiar with electronics components application, and smart home is preferred
  • PLC system application design experience and solid experience in smart appliances field is preferred
  • Knowledge of Quality tools like FMEA and 6-sigma is preferred
  • Good speaking and writing skills in Mandarin to effectively convey information, express opinions, English level should be passed CET-4 at least
  • Willing to business trip frequently in China
75

Electronic Engineer Resume Examples & Samples

  • Support the global Ultrasound Probes team on cost reduction projects and NPI‘s
  • Optimize PCB/flex design for cost reduction, product performance and reliability
  • Identify potential for cost reduction and implement the design
  • Optimize device specific cable designs for cost reduction
  • Colaborate with global team of electrical engineers and other modalities to optimize entire probes design
  • Electrical engineer with degree of university or comparable
  • Excellent knowlegde in Cadence, PSpice/LTspice and MS Office software packages,
  • Brilliant Knowledge of analogue circuit design, including layout design
  • Excellent english skills
76

Electronic Engineer Resume Examples & Samples

  • Lead High Energy Laser power converter engineering build and test
  • Lab assembling, testing, and troubleshooting power electronics hardware with technician support using high voltage and high power precautions
  • Perform power system testing, analysis, and product improvements
  • Travel to suppliers, vendors, and subcontractors with some recurring visits up to a week in duration, to provide technical support/guidance in Li-ion battery module assembly and test efforts
  • Execute technical concepts, strategies, and plans quickly and work with minimal supervision
  • Must be able to obtain a Secret Security Clearance to qualify for this position
  • Must have a complete understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties
  • Must possess the ability to understand new concepts quickly; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems
  • Must have excellent communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one engineering area; and, lead a team of less experienced professional employees on semi-routine tasks
77

Electronic Engineer Resume Examples & Samples

  • Maintains technical expertise in all areas of networks and computer hardware and software interconnection and interfacing, such as routers, switchers, firewalls, hubs, bridges, gateways, etc
  • May propose solutions to management to ensure all communications requirements based on future needs and current usage, configuring such solutions to optimize cost savings. Prepares or ensures that appropriate network documentation exists, including operational instructions
  • Provides regular monitoring and network analysis regarding short- and long-range planning for in-house systems
  • May coordinate third-party maintenance for network equipment
78

Electronic Engineer Resume Examples & Samples

  • You may be expected to travel for this position
  • Knowledge of professional electronics engineering theories, concepts, principles, techniques, and practices involved in electronics, system design, architecture, and integration
  • Knowledge of systems engineering issues and best practices for areas such as software, electronics, and environmental
  • Knowledge of standard acquisition regulations, practices, and procedures
  • Ability to analyze data and communicate results in oral and written presentations
79

Power Electronic Engineer Resume Examples & Samples

  • Serial product development
  • Lead engineering team through new product design
  • Systems Engineering process adherence through concept-requirements-design-verification-handover
  • Risk analysis and quality assurance
  • Facilitate breakdown of design tasks from system to components & control SW setting - success criteria
  • Focus on performance indicators and verification status
  • Specific knowledge of