Electrical & Instrumentation Technician Resume Samples

4.5 (107 votes) for Electrical & Instrumentation Technician Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the electrical & instrumentation technician job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Resume Builder
CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.
USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.
SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Create a Resume in Minutes
JS
J Swaniawski
Jedidiah
Swaniawski
383 Retta Landing
Dallas
TX
+1 (555) 864 8671
383 Retta Landing
Dallas
TX
Phone
p +1 (555) 864 8671
Experience Experience
Dallas, TX
Electrical Instrumentation Technician
Dallas, TX
Lakin-Ruecker
Dallas, TX
Electrical Instrumentation Technician
  • Conduct project work/electrical upgrades and monitor contractor project work and upgrades
  • Keeps shop and work areas in a clean and orderly condition
  • Performs other duties as assigned
  • Project Management for automation projects
  • Plant network administration
  • Industrial Network knowledge on Device Net
  • AutoCAD reading and editing
New York, NY
Electrical / Instrumentation Technician
New York, NY
Zieme-Walter
New York, NY
Electrical / Instrumentation Technician
  • Actively champion and promote all safety related policies and programs to ensure colleague engagement and commitment to the benefits of working safe
  • Perform as a team member while supporting the planned, preventative, and/or predictive maintenance activities that support the electrical and process control systems of the plant
  • Perform as a team member or independently to trouble-shoot, diagnose, and propose and implement electrical power and control equipment as well as process control component repair solutions
  • Comprehend and implement standard electrical work practices and guidelines to include those outlined by such organizations as the National Fire Protection Agency (NEC) and the IEEE to insure a quality as well as a compliant product
  • Utilize the functions of the maintenance management system to facilitate job plans and record maintenance activities on plant assets
  • Basic knowledge of AC/DC circuit theory
  • Basic knowledge of process sensors/transmitters
present
Detroit, MI
Electrical & Instrumentation Technician
Detroit, MI
Medhurst, Marvin and Wisoky
present
Detroit, MI
Electrical & Instrumentation Technician
present
  • Participating in the planning and execution of chemical plant turnarounds
  • Installing equipment
  • Assisting in the review, development and implementation of site preventative maintenance programs
  • Tuning of process control loops and machine control systems
  • Programming and troubleshooting of DCS, PLC and HMI interfaces
  • Troubleshooting and E&I maintenance on up to 2300 V voltage equipment
  • Troubleshooting on high voltage 13.8 kv
Education Education
Bachelor’s Degree in Electrical
Bachelor’s Degree in Electrical
DePaul University
Bachelor’s Degree in Electrical
Skills Skills
  • Good interpersonal skills with ability to work in a team setting
  • Extensive prior maintenance experience demonstrating knowledge and ability
  • A motivated self starter with excellent work ethic and demonstrated ability to work with minimal supervision
  • Apply all applicable codes, regulations, reliability strategies, corporate and OEM standards to the tasks of Electrical & Instrumentation (E&I) jobs
  • Demonstrated ability to evaluate, prioritize, and make timely decisions in emergency situations
  • Basic computer software and hardware experience including competency with MS Office
  • Demonstrated knowledge and support of predictive/preventive maintenance programs
  • Working knowledge and support of planning and scheduling functions
  • Strong computer skills
  • Strong troubleshooting skills
Create a Resume in Minutes

15 Electrical & Instrumentation Technician resume templates

1

Electrical, Instrumentation Technician Resume Examples & Samples

  • Performing working knowledge of Programmable Logic Controllers
  • Interpreting electrical schematics and Piping and Instrumentation Drawings daily
  • Identifying and examining production equipment failures to understand root causes
  • Operating conduit bender and threader
  • Maintaining an open dialogue with lead and supervisor regarding day-to-day activities
2

Water Plant Electrical & Instrumentation Technician Resume Examples & Samples

  • Maintains a variety of process instrumentation and electrical controls associated with a water treatment plant and distribution system, and sewer lift stations
  • Maintains PLCs including modifying and updating programs
  • Understands, updates, and creates schematics and drawings for control systems
  • Troubleshoot and repair AC, DC, MA, and pneumatic equipment/systems i.e., transducers, analyzers, actuators, MCCs, secondary circuit breakers, process controls, variable frequency/speed drives, motor & pneumatic operated valves, etc
  • Plans and executes all work in a safe manner at all times
  • Maintains electrical and instrumentation systems in a wastewater plant
3

Electrical & Instrumentation Technician Resume Examples & Samples

  • Ensure that all safety, environmental and health rules and guidelines are being adhered to at all times to maintain an accident-free, healthy and clean environment at the workplace
  • Maintain and update the work system either in excel sheet or SAP PM module
  • Carries out the planned and unplanned instrumentation & maintenance work with emphasis on quality utilization of time and material
  • Communicate effectively with all personnel within the section (ED Plant & UGF), within the department and other internal customers, especially on day-to-day maintenance & technical problems
  • Troubleshoots and provides technical solutions to solve instrumentation problems and suggests ways to remove/reduce deficiencies in instrumentation system
  • Keeps track on essential instrument spare parts and instrumentation maintenance materials, and to inform the superior of any deficiencies
  • Ensures that technical and other documents used in the department are categorized, updated and kept according to the adopted document management system
  • Support, coordinate & monitor contractors in carrying out the contracted jobs or projects
  • Analyses the need to upgrade on self-technical competency and recommends the appropriate training to superior
  • Provide training & coaching to new comers on related instrumentation knowledge to raise the frontline team troubleshooting skill & capability toward ED Plant equipment & facility
  • Maintain & perform Safety Instrumented System (SIS) related requirement & task accordingly
  • Carry out instrumentation related project once assigned by Superior
  • Liaise with Procurement Team & provide Technical Specification of instrument to Procurement. Ensures compliance to standard management systems of ISO 9001, ISO 140001, OSHA 18001, and BASF’s RCMS Safety Management System
4

Electrical & Instrumentation Technician Resume Examples & Samples

  • Three (3) years or more of experience as a Journeyman Electrical and Instrumentation Technician in an industrial environment OR a two (2) degree or higher in Industrial Electrical Maintenance or Electrical Engineering
  • Willing and able to work rotating shifts
  • Willing to work weekends, holidays, and overtime when needed
  • Willing and able to perform tasks such as lifting, walking, climbing, stooping, standing, pushing and/or pulling for up to 12 hours a day
  • Five (5) years or more of experience as an Industrial Electrician/Instrumentation Journeyman Technician
5

Electrical & Instrumentation Technician Resume Examples & Samples

  • At least three (3) years of experience as an Industrial Electrician or a two (2) year degree in industrial technology and at least two (2) years of experience as an Industrial Electrician
  • Experience with industrial controls PLCs, motor controls, control valves, electrical distribution, etc
  • Experience with industrial instrumentation for flow, pressure and temperature
  • Willing and able to work overtime, weekends and holidays when required
  • Experience reading electrical and mechanical schematics / blueprints
  • Willing and able to work in a manufacturing plant environment that would include extended periods of time in noisy, non-air conditioned or unheated areas
  • Willing and able to maintain a strict adherence to safety rules and regulations to include wearing safety equipment
  • Experience using Microsoft Word, Excel and Outlook
  • Bachelor's degree or higher in Electrical Engineering or Manufacturing
  • Experience with a Computerized Maintenance Management Software (CMMS)
  • Experience with mechanical maintenance, including fluid handling and conveyor systems, hydraulic systems and accumulators, and valve identification and application, and, welding and machining
  • Experience in the Paper products manufacturing industry
6

Electrical & Instrumentation Technician Resume Examples & Samples

  • Associate or Technical degree or higher in Electrical Engineering, Electrical Systems, Instrumentation, Electronic Technology AND at least two (2) years of electrical/electronic or instrument & control troubleshooting experience in a manufacturing environment OR at least four (4) years of electrical/electronic or instrument & control troubleshooting experience in a manufacturing environment
  • Mechanical maintenance experience to include fluid handling and conveyor systems, hydraulic systems and accumulators, and valve identification and application
  • Experience working with Industrial Controls, e.g. PLC, motor controls, control valves, electrical distribution, industrial instrumentation for flow, pressure, & temperature
  • Willing and able to work any shift, overtime, weekends and holidays
  • Experience reading and following electrical and maintenance schematics/blueprints
  • Willing and able to maintain strict adherence to safety rules and regulations, to include wearing safety equipment as required by specific jobs
  • Experience connecting PC’s to controls-related equipment to troubleshoot and make changes
  • Experience with Allen Bradley and Siemens PLCs and VFDs
  • Experience with systems integration to include PLC, HMI, instrumentation, networking, communication, power distribution
  • Experience with EVOL Flexo equipment
  • Experience with Corrugator equipment
  • Experience with computer operating systems, networks and electronic information handling
  • Experience with fabrication and welding
7

Electrical & Instrumentation Technician Resume Examples & Samples

  • At least three (3) years of electrical experience in an industrial manufacturing environment or two (2) year Associate Degree in Electrical Engineering or Instrumentation
  • Willing and able to work any shift, on-call, holidays, weekends and overtime as needed
  • Willing and able to maintain strict adherence to safety rules and regulations including wearing PPE (personal protective equipment)
  • Two (2) years or more of experience with troubleshooting and maintaining Allen Bradley and Siemens 505 Programmable Logic Controller
  • Experience in Ethernet, Device Net, and HART communications protocols
  • Minimum of two (2) years of experience troubleshooting electrical controls, PLC’s, AC/DC motors, full voltage motor controls, and variable speed motor controls
  • Experience working with hydraulic and pneumatics systems
  • Experience with precision alignment of motors, couplings, bearings and pumps, lubrication
8

Electrical & Instrumentation Technician Resume Examples & Samples

  • Two (2) or more years of electrical and/or instrumentation experience in a manufacturing or industrial setting
  • Willing and able to learn and practice mechanical millwright skills
  • Willing and able to work weekends, holidays, rotating shifts, and overtime when needed
  • Willing and able to work in a hot, humid, cold, dusty, and noisy industrial environment
  • Willing to maintain strict adherence to safety rules and regulations, including wearing safety equipment
  • Five (5) or more years of electrical and/or instrumentation experience in a manufacturing or industrial setting
  • ISA Certification (CCST)
  • Knowledge of calibration, loop checking and maintenance/repair of instrument and pneumatic equipment
9

Electrical & Instrumentation Technician Resume Examples & Samples

  • Four (4) or more years of electrical and/or instrumentation experience in a manufacturing/industrial setting
  • Willing and able to perform physically demanding tasks repetitively for extended periods of time, i.e. lifting, walking, climbing, stooping, standing, pushing and/or pulling
  • Six (6) or more years of electrical and/or instrumentation experience in a manufacturing/industrial setting
  • Power, refining, chemical, or pulp & paper industry experience
  • Computer skills related to Maintenance Management software e.g. Passport, Excel, Word, Outlook
  • Knowledge of calibration, loop checking and maintenance/repair of instrument, electrical and pneumatic equipment
10

Electrical & Instrumentation Technician Resume Examples & Samples

  • Maintaining, troubleshooting and repairing chemical plant instrumentation and equipment including low and high voltages, valves, transmitters, controllers, and Distributed Control Systems (DCS)
  • Investigation of equipment failures to include determining root causes, and recommending and implementing appropriate solutions to eliminate or reduce failures
  • Assisting in the review, development and implementation of site preventative maintenance programs
  • Participating in the planning and execution of chemical plant turnarounds
  • 5+ years’ experience in an industrial chemical or manufacturing environment
  • A strong background in control and instrumentation, including valves, transmitters, controllers, and DCS systems
  • Experience with electronic and digital process control systems, related loop equipment, electric motors, high voltage equipment, as well as control circuitry
  • Familiarity with methods of level, temperature, pressure, and flow measurement, as well as knowledge relating to pneumatic and electronic instrumentation
  • Have practical knowledge relating to electrical distribution, motors and motor control, conduit and wiring practices, lighting and grounding as well as familiarity with the National Electrical Code (particularly for hazardous locations)
  • Process analyzer experience helpful but not required
11

Electrical & Instrumentation Technician Resume Examples & Samples

  • Three (3) years or more of electrical maintenance experience in an industrial manufacturing or military environment
  • Experience troubleshooting and performing preventive and predictive maintenance functions on equipment including: motor starters, motor control centers, programmable logic controllers, control panels, electrical distribution systems, instrument calibration & repairs, control loop tuning & repairs, and distributed process control systems
  • Willing and able to perform tasks such as lifting (up to 50 pounds), walking, climbing, stooping, standing, pushing and/or pulling for up to twelve (12) hours a day
  • Willing and able to work any shift, on-call, holidays, weekends, and overtime as needed
  • Knowledge of industrial test equipment, 0-15000 volts
  • Experience reading technical drawings, schematics, and interpreting OEM (Original Equipment Manufacturer) manuals
  • Experience/Knowledge with Foxboro, Honeywell, or similar Distributed Control System programming and troubleshooting
  • Experience troubleshooting electrical controls, PLC’s (Allen Bradley Control Logix software), AC and DC motors & drives, motor controllers, pneumatic and hydraulic systems, control loops and instrumentation
  • Technical degree in Electrical or Instrumentation
  • Leadership experience in an industrial or manufacturing environment
  • Experience with Microsoft Word, Excel, Outlook and Projects
12

Maintenance Electrical Instrumentation Technician Resume Examples & Samples

  • Conduct scheduled, unscheduled, and preventive maintenance of process and environmental equipment in accordance with the SOP, Safety Health & Environment policies, and current Good Manufacturing Practices. Maintenance activities encompass equipment diagnostics, repairs, troubleshooting, alterations, management of service suppliers, and recommendation / implementation of solutions to prevent problem reoccurrence
  • Calibrate and certify instruments and scales; tests and certifies PCS/DCS systems; conducts routine checks of alarms and interlocks
  • Maintains computers and software packages relevant to the design, modification, installation and calibration of electrical and instrumentation systems; PCS (DCS) and computer maintenance management systems (RAM)
  • With minimal supervision install, maintain, inspect, certify, troubleshoot and repair electrical equipment, instruments and systems, including 120V, 480V and 2300V in high-hazard classified areas in accordance with NEC
  • Independently coordinate and schedule set up and changeover of processing equipment
  • Coordinate the installation, calibration, repair and maintenance of building automation control Systems, HVAC controls and networks, production equipment computer based controls, electronic instrumentation and programmable logic controllers
  • Manage and maintain instrument calibration documentation and CMMS database. Responsible for the initiation of OOS and OOT documentation when instrumentation calibrations indicate out of tolerance or failure
  • Provides hands on training to other team members and production technicians in areas of expertise
  • Develops and/or revises standard operating procedures
  • Independently, or in conjunction with the appropriate management staff, resolve maintenance, electrical and utility system issues and complete necessary reports to ensure adequate communications and deviations from standard operations
  • Conducts and completes investigations as well as subsequent corrective actions and documents such in Trackwise
  • Interacts with internal and external engineers and vendors to design, evaluate, purchase and install new instrumentation and assists in the design/redesign of major facilities systems
  • Designs, fabricates and installs new systems and equipment or modifies existing equipment to meet changing project applications
  • Works on projects with other departments to analyze instrument and electrical needs for new equipment
  • Maintain critical spare parts to support the above listed maintenance activities
  • A minimum of five to seven years of related experience and/or education in electronic, electrical,and mechanical system maintenance within the API / pharmaceutical / medical device industries
  • Strong mechanical / electrical aptitude, robust knowledge and understanding of PLC and
  • Ability to read and understand blueprints, electrical and mechanical schematics, maintenance manuals, electrical control drawings, loop diagrams and P&IDs
  • Robust knowledge of electromechanical systems with various controls, (e.g. DCS, PLC). Good mechanical aptitude
  • Solid understanding of GMP and FDA regulations
  • Ability to independently apply scientific and/or technical knowledge in the performance of job duties
  • Associates Degree in Specialized Technology or related discipline
  • Familiarity with Lean Six Sigma concepts
  • Prior training in 5S/Kaizen concepts
13

Electrical & Instrumentation Technician Resume Examples & Samples

  • Disassemble, inspect, troubleshoot, clean, repair, and reassemble equipment such as MCC’s, motors, instruments, valves, etc. according to oral and written instructions
  • Work closely with Maintenance Technicians and Process Technicians on site and assist teammates in completing tasks outside the scope of typical responsibilities
  • Maintain parts inventory and order all necessary maintenance materials
  • Plan maintenance work with operations, contractors, and other plant employees
  • Generates written procedures to complete routine maintenance tasks
  • Must Have at least five years of plant maintenance experience
  • Working knowledge of industrial electrical systems and instrumentation
  • Working knowledge of maintaining rotating and fixed equipment in an industrial environment
  • Excellent Interpersonal, written and verbal communication skills
  • Experience with MS Office suite (Excel, Word, etc.)
  • Strong team player with an ability to work closely with all functional teams within the plant
  • Self-starter with systematic decision making, problem solving and troubleshooting skills
  • Ability to do moderate to heavy lifting (50 lbs)
14

Electrical & Instrumentation Technician Resume Examples & Samples

  • Perform PM’s on electrical and instrumentation loops
  • Troubleshooting and E&I maintenance on up to 2300 V voltage equipment
  • Troubleshooting on high voltage 13.8 kv
  • Must be able to complete structured TPC training module and show a good working knowledge in areas related to this position
  • Ability to adapt to a Work Process to perform maintenance related activities
  • Installation and troubleshooting of electrical (starters and controls) and all types of instrumentation loops (electronic and pneumatic)
  • Must have good communication skills (written and oral) and possess the ability to work closely with operations personnel on a daily basis
  • Must be able to work 8- hour days as well as planned and unplanned overtime; and callouts on the night shift and weekends when necessary
  • Must be a safety leader and follow all safe work practices and policies
  • High School Diploma or equivalent and Industrial Wage Certificate, with a minimum of two years electrical/instrumentation trade school or minimum five years’ experience in an electrical/instrumentation apprenticeship program or related work in an electrical/instrumentation maintenance organization
  • Must be familiar with instrumentation loops and pneumatic controls
  • Must be self-motivated and willing to learn
15

Electrical & Instrumentation Technician Resume Examples & Samples

  • One of the following
  • Allen-Bradley (A-B) Guard-Logix, A-B Control-Logix, or Siemens 500 series PLC troubleshooting experience
  • Experience with variable speed drives A-B Power-Flex, ABB ACS800, ABB ACS850, ABB DCS800 or Yaskawa
  • Experience with Delta-V or other Distributed Control System (DCS) platform
  • Experience with Fanuc Robots
  • Fabrication and welding experience
16

Electrical & Instrumentation Technician Resume Examples & Samples

  • 120V to 60kVAC switchgear
  • MCC controls
  • Hydraulic, electronic, and pneumatic controls
  • 480 VAC motor control centers
  • Crane controls/pollution control equipment
  • Calibrating transmitters
  • Citect & programmable logic GE, TI Square D, Allen Bradley
  • 1-5 volts/24Vdc
  • 125 Vdc UPS
17

Electrical & Instrumentation Technician Resume Examples & Samples

  • Experience in troubleshooting and repair of electronic and digital process control systems, related loop equipment, electric motors, high voltage equipment, as well as control circuitry
  • Embrace SAFETY FIRST every day and at all times
  • Thorough understanding of and compliance with OSHA regulations
  • Must be able to read blue prints, specification sheets, loop diagrams and P&IDs
  • Basic computer software and hardware experience including competency with MS Office
  • Must possess good math, science, and problem solving skills
  • Prior experience with SAP a plus
  • Must be able to work at heights of 100 ft. and in confined spaces
  • Must be able to work in an industrial environment, which includes substantial bending, lifting, reaching, climbing, etc
  • Must be able to respond to call-outs and have flexibility to work overtime
  • Must possess initiative and be self-motivated
  • Good interpersonal skills with ability to work in a team setting
  • Clear and effective written and oral communication
18

Electrical & Instrumentation Technician Resume Examples & Samples

  • Accept personal responsibility for own Safety and Health and that of colleagues
  • Accept personal stewardship of Environment by understanding the potential impact of job activities, plant-wide activities, and business in order to protect it during daily activities
  • Understand Risks. Each employee must submit Risk Assessments
  • Make Safe Choices. All rules and procedures must be followed. Unsafe practices will not be tolerated. Each employee is required to meet the standards
  • Prevent future incidents. Each employee must submit Near Miss Reports. Report all incidents and Near Misses. Share learning, and learn when others share
  • Participate in incident / Near Miss investigations
  • Correct unsafe behavior and conditions by using good root cause analysis to generate effective corrective actions
  • Participate in Safety Meetings and SHE related activities (Central Safety Committee, Housekeeping Team, SHE Training, Audits, and etc.)
  • Effectively manage costs
  • Experience in configuration, calibration, installation, application, maintenance, and/or troubleshooting industrial instrumentation is required
  • Experience with motors, breakers, starters, and switch gear is required
  • A valid state Journeyman's license is preferred but not required
19

Electrical & Instrumentation Technician Resume Examples & Samples

  • Operate high speed making, packing, and other production related equipment
  • Troubleshoot and perform routine maintenance on basic equipment components
  • Develop and analyze data using basic skills in math and statistics
  • Follow all company Safety Rules and Good Manufacturing Practices (GMP’s)
  • Produce high quality products in a safe manner
  • Must be available to work any shift, including weekends and overtime, as needed while maintaining a good attendance record
  • Flow to the work in all areas of production and packaging
  • Operate a computer to input and review data for the purpose of maintaining accurate records
  • Ability to work as part of a team and assist others as needed
  • Displays a positive attitude
  • Eager to learn and teach
  • Upholds all dimensions of Plant Safety
  • Upholds Quality Systems
  • Exhibits effective communication skills
  • Demonstrates strong troubleshooting skills
  • Employee is required to stand and lift frequently
  • Employee is required to use hands and arms for reaching/handling purposes
  • Employee is required to stand and walk at minimum 70% of the time
  • Employee must be able to work 12 hour shifts
  • Employee must be able to work any shift (day or night) including weekends and holidays if a business need arises
  • Employee must occasionally lift/push/pull or carry up to fifty (50) pounds, and should be able to lift 30-35 pounds on a frequent basis
  • Employee must be able to squat or kneel and to bend on a frequent basis
  • Employee must be able to tolerate exposure to food allergens
  • Employee must be able to climb steps on a frequent basis as well as stand on or move around on platforms, equipment and concrete floors
20

Ripon Plant Electrical & Instrumentation Technician Resume Examples & Samples

  • Write, implement, and troubleshoot PLC code on new and existing equipment
  • Participate and coach others to maintain power and controls equipment
  • Lead improvement projects and plant control upgrades
  • Ability to operate high speed making, packing, and other production related equipment
  • Make personal safety and safe operations a priority
  • Maintain a clean work area and utilize Good Manufacturing Practices by following all quality specifications and performing quality inspections
  • Know and use terminology and functions of machine components
  • Quickly and effectively trouble shoot and repair plant equipment
  • Develop and update electrical schematics for systems using AutoCAD
  • Effectively coordinate sub-contractors performing technical work
  • 5-year experience supporting machine control systems
  • 2 or 4 year technical degree desired
  • Self-motivated and able to work independently with minimal supervision
  • Solid understanding of Rockwell PLC hardware, PLC programming, VFDs, and HMI
  • Solid understanding of servos, encoders, linear actuators, pneumatic equipment, and sensors
  • Effective team leadership skills including
21

Electrical & Instrumentation Technician Resume Examples & Samples

  • Allen-Bradley, ControlLogix or other PLC programming and/or troubleshooting experience
  • Experience with systems integration e.g.: PLC, HMI, instrumentation, networking, communication and power distribution
  • Experience with Allen Bradley, PowerFlex or other Variable Speed drives
  • Experience with Honeywell, Experion or other Distributed Control System (DCS) platforms
  • Experience with Fanuc or other robotic equipment
  • Experience with Honeywell BMS, Honeywell transmitters (temperature, pressure and level), Emerson Micromotion Flowmeters and Emerson Rosemount transmitters (temperature, pressure and level)
  • Experience troubleshooting and repairing process control elements, PLCs, photo eyes and other automated equipment
  • Experience with Motor Control Centers (MCCs) and related electrical equipment up to 480V
  • Experience with electrical one line drawings, cable schedules, functional descriptions, I/O lists and other related electrical documents
22

Electrical & Instrumentation Technician Resume Examples & Samples

  • Mechanical maintenance experience, including fluid handling and conveyor systems, hydraulic systems and accumulators, and valve identification and application and welding
  • Experience with Allen Bradley and Siemens PLCs
  • Experience programming variable frequency drives (VFDs)
  • Experience with systems integration including PLC, HMI, instrumentation, networking, communication, power distribution
  • Distributed Control (DC) experience
  • Experience with EVOL Flexo (MHI) equipment
  • Experience with corrugator (MarquipWard, MHI, Fosber, E&L) equipment
23

Electrical & Instrumentation Technician Resume Examples & Samples

  • At least one (1) year of Electrical and Instrumentation maintenance experience
  • Experience using a Computerized Maintenance Management System (CMMS)
  • Experience with Microsoft Office Word and Excel; creating and editing Word documents and Excel spreadsheets
  • Willing and able to work any shift to include variable start times, nights, overtime, weekends, holidays and on-call as required
  • Experience with Honeywell controllers, Emerson Micromotion, Emerson Rosemount, Foxboro transmitters and MoistTech moisture meters
  • Experience with power transformer and power distribution (23kv, 12.5kv, 4.16kv, 2.3kv, 480v)
  • Experience with DCS and PLC integration configuration
  • Completion of an electrical apprenticeship or an E&I certificate
  • Experience troubleshooting & repairing hydraulics & pneumatics
  • At least five (5) years of experience in an electrical and instrumentation technician role
24

Electrical & Instrumentation Technician Resume Examples & Samples

  • You will be a role model for safety
  • To liaise effectively with external agencies and manufacturers who may need to be brought in when problems are not within the scope of the role, this also involves knowing one’s limitations and following carefully health and safety guidelines
  • Performs high quality Root-cause analysis for technical and process problems
  • Supports and suggests and implements improvements (eg: safety, technology, process) and assures legal compliance on maintenance works
  • To cover, in addition to the above, other areas of responsibility as required (eg: in the event of the absence of colleagues or in the event that extra help is required at that particular time)
  • If the need arises to be prepared to work out of Tawd at other sites owned or leased by the Company
25

Sxl-electrical & Instrumentation Technician Resume Examples & Samples

  • Installation and maintenance of SCADA systems, plant, pipeline, and pipeline components: including but not limited to pneumatic, electronic, instrumentation, electrical, and software associated with each
  • Efficient in troubleshooting and calibration of instruments: Pressure & Temperature transmitters, Gravitometers, MOV”s, AC Drives, Multilins and OMNIs. Familiar with medium voltage switchgear (4160, 2300, & 480 included). Experience with incoming line power distribution and transformers on poles from utility. Experience with all meters: example Hart Communicator, Fluke multi meter, Oscilloscope, Decade box,
  • Diagnose and correct problems associated with PLC's and electrical systems & control. Ability to trouble shoot using ladder, or object based function block programming
  • Read and use drawings and schematics, including Electrical (schematic & single line diagrams, Instrumentation, loop & spec sheets, Pneumatic and P&ID (ISO drawings preferred but not required)
  • Extensive knowledge of DOT 195 as it pertains to required testing and documentation plants and pump stations
  • Understanding of the National Electric Code and OSHA 1910 as it relates to electrical (NFPA70E knowledge required)
  • Able to support call out/on call requirements. 24/7 365 days a year
  • Associates degree in Instrumentation, preferred
  • State Electrical License preferred
26

Electrical & Instrumentation Technician Resume Examples & Samples

  • Installation, configuration and troubleshooting of photo eyes, proximity switches, limit switches, PLC input/output modules and all associated control wiring
  • Maintain and troubleshoot position feedback devices, encoders, load cells, hydraulic systems, natural gas burners and boiler control systems
  • Installation, calibration and troubleshooting of pressure, level, flow, temperature, consistency, conductivity, turbidity and pH transmitters
  • Tuning of process control loops and machine control systems
  • Programming and troubleshooting of DCS, PLC and HMI interfaces
  • Perform configuration and logic modifications to DCS and PLC control systems. Modifications will include programming in ladder logic, block logic. sequential logic and statement logic
  • Design, configuration and implementation of integrated and stand-alone graphic human machine interfaces
  • Design and specification of communication protocols, including Profibus, serial and industrial Ethernet
  • Must be able to read, write and comprehend basic English
  • Minimum 2 years of demonstrated electrical experience and/or 2 years mechanical experience, or 2 years of related education in lieu of experience
  • Experienced in working with computerized maintenance system preferred
27

Electrical & Instrumentation Technician Resume Examples & Samples

  • Works safely
  • Plans details of own work on special assignments following established procedures and electrical codes
  • Reads and uses all types of electrical schematic wiring diagrams and keeps abreast of new innovations and techniques in the specialized fields in which engaged
  • Locates, diagnoses, and corrects troubles in electrical systems in most efficient manner
  • Records data and all changes made to system
  • Makes standard computations for load requirements or for wiring of electrical equipment
  • Uses variety of electrical hand tools and measuring and test equipment, i.e., ammeters, oscilloscopes, multimeters, meggers, etc
  • Assists in on-the-job training of others
  • Participates with colleagues as required in all tasks related to a safe and effective operation
  • Technical certificate or equivalent from a two year college or technical school
  • Or 5 years related experience and/or training; or equivalent combination of education and experience
  • Associate’s degree in a related field preferred
  • Familiar with AC & DC control systems, 110-480V motor controls, HMI programming, and 4-20mA sensors
  • Experience with Lock-out-tag-out, Arc Flash procedures, and NFPA as applicable to trade
  • Experience with PLCs, drives, HMI & software systems; proven ability to systematically troubleshoot process equipment using a laptop and other tools required; experience with Rockwell program strongly preferred.Experience with computer-based Maintenance system for PMs, parts control, and work orders is desirable. (SAP, MP3, etc…)
  • Computer literacy required (logging information, research, record keeping, and typing is desirable)
28

Electrical & Instrumentation Technician Resume Examples & Samples

  • Five (5) years or more electrical and electronic experience in an industrial or manufacturing environment
  • Current Shelby County TN Journeyman Electrical license or willing and able to attain within six (6) months of employment
  • Two (2) years or more of experience with industrial PLC and DCS controls
  • Experience with pneumatic and hydraulic systems
  • Experience with PCs and Microsoft products; Outlook-communication, Excel-spreadsheet creation and Word-document creation
  • Willing and able to operate mobile equipment to include; forklifts, man lifts, utility carts and other equipment as needed, AND, to attain GP operator license for listed mobile equipment
  • Willing and able to set up, climb and work from ladders
  • Willing and able to obtain all company specific level 5 Technician certification requirements within eighteen (18) months of hire date
  • Willing and able to work overtime and on-call as needed
  • Experience with Honeywell TDC and Experion DCS configuration and programming
  • Experience with Modicon and Allen Bradley PLC programming and machine interface
  • Experience with Neles Jamesbury, Fisher, Durco control valve rebuild and calibration
  • Experience working with Proworx32, RSLogix5000, Experion, Drive Wizard, and GE Multilin
29

Electrical & Instrumentation Technician Resume Examples & Samples

  • Experience with corrugator equipment
  • A two (2) years degree or higher in Industrial Technology AND at least 2 years of electrical and instrumentation troubleshooting experience in a manufacturing environment OR at least 4 years of electrical and instrumentation troubleshooting experience in a manufacturing environment
  • Experience with Industrial Controls; PLC, motor controls, control valves, electrical distribution, industrial instrumentation for flow, pressure, and temperature
  • Willing and able to work any shift, overtime, weekends, and holidays when required
  • Willing and able to read electrical and maintenance schematics/blueprints
  • Willing and able to work in a loud/noisy, hot, humid, dusty, greasy, and high volume environment
  • Experience with mechanical maintenance including fluid handling, conveyor systems, hydraulic systems and accumulators, valve identification and application and welding
  • Experience with connecting from PC to controls related equipment to troubleshoot and make changes
  • Experience with Allen Bradley and Siemens systems
  • Experience with all aspects of systems integration, including PLC, HMI, instrumentation, networking, communication, and power distribution
  • Experience with Corrugated Rotary/Flexo equipment
30

Electrical & Instrumentation Technician Resume Examples & Samples

  • Accept training and complete work on I, E, C crafts as needed
  • Complete interlock testing
  • Assist Maintenance and Operating Teams with general maintenance and equipment repairs
  • Maintain complete records, manuals, technical references, prints, and diagrams associated with all plant maintenance and repair activities
  • Consult on and redline technical documentation, procedures, drawings, schematics, and manuals
  • Update shift logs and document process variables in checklists, work instructions, procedures, and other media
  • Use desktop computer-based systems such as ETQ Reliance, IP21, email, and MS Office Suite, etc
  • Participate in training and continuous improvement events
  • Other special projects or duties are assigned as needed
  • Minimum High School Diploma or equivalency required
  • Associates degree, trade certifications, or other relevant professional certifications preferred
  • Minimum 2 years of industrial plant maintenance experience with 5 or more years preferred. Not required for Apprentice level
  • Knowledge, skills, and ability to safely use maintenance tools and equipment
  • Ability to read technical drawings and schematics (not required for Apprentice level)
  • Good desktop computer (Microsoft office) skills
  • Knowledge of IP21 and/or PLCs preferred
  • Stand; walk; and use arms and hands to handle, feel, reach, pull, turn, grasp, and carry items
  • Stoop, kneel, crouch, and crawl
  • See up close and far away
  • Talk and hear
  • Frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds
  • Be able and willing to wear all PPE required for a high hazard, chemical industrial manufacturing environment and completion of maintenance work tasks
  • Be able and willing to wear a respirator both continuously or intermittently and throughout the shift
  • Be able to work up to 12 hours/day-at any time of day
  • Climb up and down staircases, ladders, and scaffolding on an hourly/daily basis to perform job tasks
31

Electrical / Instrumentation Technician Resume Examples & Samples

  • Must have two years of college, technical school, or service training pertaining to instrumentation and electronic technology or four years of related field experience as an instrumentation technician
  • Must be knowledgeable in areas of electronics, computers, basic operating systems software (Microsoft Server, Windows XP & Windows 7, and MS office), process analyzers and electrical controls
  • Must be knowledgeable in areas of electronics, pneumatics, hydraulics, chemistry, physics, and fluid dynamics
  • Knowledge of thermography, ultrasonic testing, and PDMA is preferred
  • Work requires the ability to read and understand operating manuals, blueprints and schematics
  • Excellent work and safety record
  • Must be able to use proper Personal Protective Equipment as required
  • Ability to be on call 24/7 as needed
32

Eoi-electrical & Instrumentation Technician Resume Examples & Samples

  • Comply to and consistently follow the standards and procedures designed to enable you to work safely and effectively every day
  • Provide Electrical trade skills to perform planned, unplanned and or breakdown maintenance
  • Develop close working relationships with operations personnel to ensure that all plant downtime issues are escalated correctly and remedied promptly
  • Provide continual feedback to the maintenance supervisor on job/task progress
33

Electrical & Instrumentation Technician Resume Examples & Samples

  • A diploma in Electrical Engineering Technology or Instrumentation Engineering Technician
  • 3 – 5 Years in an industrial environment would be an asset
  • Provincial or Interprovincial certification as an electrician would be an asset
34

Electrical Instrumentation Technician Resume Examples & Samples

  • Design electrical modifications which includes researching appropriate software, submitting ECAs, making back ups of programs as needed and utilization of ladder logic
  • Conduct project work/electrical upgrades and monitor contractor project work and upgrades
  • Five years OJT experience in electrical machine troubleshooting; experience with computers, PLCs, reading blueprints and schematics
  • Experience with drives, I/O devices, man-machine interfaces and ladder logic (Allen Bradley and Modicon)
  • During electrical troubleshooting, an electrician must be able to track down the source of power failure (i.e. the electrician would be checking for incoming power and blown fuses, troubleshooting software in the PLC, checking sensors/photo eyes and checking sequences)
35

Electrical & Instrumentation Technician Resume Examples & Samples

  • Disassembles and examines malfunctioning instruments and test equipment, such as bar graphs, electrical ovens, multi meters, environmental cabinets and weather-o-meters to test for defects. Replaces or repairs defective parts. Reassembles and tests equipment for conformance to specifications
  • Calibrates and aligns instruments or test equipment according to established standards. May update E&I calibration program, which includes maintaining manuals and documentation required for ISO certification. May assist in developing E&I preventive maintenance program for electrical, instrumentation and control systems
  • Assists in the construction of mechanical, plumbing and electrical systems for process equipment
  • Continuously identifies problem areas and suggests plans to optimize performance regarding installation, hardware, software and/or process issues in close cooperation with production
  • Participates in scheduled safety meetings and completes safety training requirements
  • May coordinate the work of maintenance contractors
  • Supports efforts to implement and maintain the Responsible Care® Management System in line with the requirements of the RC14001® technical specification, as applicable to the site/region
36

Electrical & Instrumentation Technician Resume Examples & Samples

  • Clear understanding and working knowledge of electrical schematics, power distribution & controls, motor & motor controls, PLC logic controls, operator interface computerized control panels, and other industrial controls
  • Demonstrated people and teamwork skills in an open team environment
  • Manage scheduled on-shift and downtime maintenance work
  • Be able to make adjustments and repairs to machines to maintain operating efficiency and reliability
  • Strong electrical/Instrumentation and trouble shooting skills
  • Willingness to work overtime
  • Willingness to rotate shifts
  • Ability to work in a fast paced environment Mandatory Overtime – subject to area procedure
  • Weekends worked as scheduled ( 12 days on and 2 days off are fairly common during busy season)
  • Procedures and rules are followed as required by area and plant
  • Good communication skills; communicate with clarity; pertinent content and demonstration of required skills
  • Understand and communicate team and area goals and objectives
  • Ability to follow directions independently and provide clear instructions to fellow team members
  • Commitment to principles of team based work environment
  • Carry ladders, repair parts and other materials
  • Climbing up and down stairs/ladders 5-10 times per shift
  • Balancing on/Climbing steps/ladders
  • Walking to all areas of the plant, in and around machines
  • Stooping to reach under equipment
  • Kneeling to repair/rebuild equipment
  • Squatting to repair/rebuild equipment
  • Reaching to repair/maintain overhead equipment
  • Handling tools, parts, turning machines on and off, paperwork
  • Feeling/checking equipment for vibration or wear
  • Twisting back, shoulders, and knees while working in small areas
  • Talking/communicating with teammates, contractors, vendors, other areas and shifts. Talking on 2- way radios, and telephones
  • Hearing machines running, co-workers, alarms, 2-way radios, etc
  • Noise/Hearing protection required in all production areas
  • Sight: Operate machinery, complete paperwork, monitor gauges and meters
37

Electrical & Instrumentation Technician Resume Examples & Samples

  • Define, plan, perform and document planned maintenance activities, including calibration, utilising a computerised maintenance management system (CMMS) and other appropriate systems
  • Manage work orders within the Computerised Maintenance Management System
  • Liaise with Maintenance Planner and internal customers in order to plan work
  • Liaise with external contractors, defining scope of works and planning/supervising site activities
  • Document maintenance activities to cGMP standards both in paper based records and the Computerised
  • Maintenance Management System. Manage the storage of maintenance records
  • Respond to breakdown of equipment, automated systems, networks and instrumentation systems, diagnosing and rectifying faults
  • Liaise with internal customers at all times
  • Perform fault finding on equipment, including automated systems and networks. Diagnose faults, organise internal/external resources, source parts and rectify to meet production requirements
  • Design, implement and test minor software modifications following System Life Cycle guidelines
  • Document maintenance activities to cGMP standards both in paper based records and the Computerised Maintenance Management System
  • Carry out “on the job training” for technical apprentices and mentors leading up to NVQ assessment
  • Develop, follow, review and update documentation, e.g. SOPs, Change Control, Deviations, reports etc
  • Write new SOPs and conduct 3 yearly reviews of current SOPs
  • Raise Change Control and Atypical Engineering Maintenance Observations etc. and manage to completion
  • Proactively engage in continuous improvement activities relating to cGMP, Productivity and Safety
  • Involved with own and team based Continuous Improvement initiatives. Implements agreed action plans
  • Seek to improve internal systems and methods of working
  • Project-manage Capital Projects within a defined maximum value
  • Liaise with internal customers to specify and plan project requirements
  • Liaise with external suppliers to estimate project costs
  • Procure equipment and services from external suppliers. Co-ordinate installation and commissioning
  • Close out project upon completion
  • Manage external contracts. Supervise external contractors and equipment vendors. Prepare issue and control safety documents
  • Time served in an Electrical, Electronic or Instrumentation discipline + 5years experience in PLC and SCADA systems
  • HNC in an Electrical, Electronic or Instrumentation discipline or relevant experience
38

Electrical & Instrumentation Technician Resume Examples & Samples

  • Associate or Technical degree or higher in Electrical Engineering, Electrical Systems, Instrumentation, Electronic Technology AND at least two (2) years of electrical/electronic and/or instrument & control troubleshooting experience in a manufacturing environment
  • Experience with systems integration e.g.: PLC, HMI, instrumentation, networking, communication, and power distribution
  • Experience with Honeywell BMS, Honeywell transmitters (temperature, pressure, and level), Emerson Micromotion Flowmeters and Emerson Rosemount transmitters (temperature, pressure, and level)
  • Experience with electrical one line drawings, cable schedules, functional descriptions, I/O lists, and other related electrical documents
39

Class Electrical & Instrumentation Technician Resume Examples & Samples

  • High school diploma or GED
  • At least one (1) of the following
  • Experience with power transformer and power distribution (23kv, 12.5kv, 4.16kv, 2.3kv, 480v)
  • Experience with DCS configuration and programming
  • Experience with Modicon and Allen Bradley PLC programming and machine interfaces
  • Able to read piping and instrumentation diagrams and mechanical / electrical drawings
  • Experience working with computers for record-keeping and documentation functions
  • Electrical maintenance experience in the pulp and paper industry
40

Electrical & Instrumentation Technician Resume Examples & Samples

  • Performs troubleshooting of industrial E&I equipment, performs repairs, helps to determine root cause of failure, and works with engineering to develop reliability resolutions
  • Works with maintenance and production to complete work both safely and efficiently
  • Maintains accurate equipment repair/modification documentation, and updates equipment files
  • Troubleshoots, and repairs electrical systems, and acts as a resource regarding plant electrical and NFPA70E regulation standards
  • Maintains a variety of electrical equipment and process control devices including interlocks, control circuits, instrumentation, Delta V, Provox and PLC Control systems, 480Vac, 208Vac, 120Vac, and 24Vdc systems, motor starters, power distribution systems, transmitters, valves (ball, control, diaphragm, butterfly), process switches, actuators, VFD’s, relays, distribution panels, motors, lighting, motor starters, general wiring, sensors, etc., and all other tasks associated with the Electrical and Instrumentation craft
  • Performs preventative maintenance (PM) tasks and follows all mandated procedures/regulations related to instrumentation, calibration, process control, related systems
  • Ability to read and understand engineering drawings such as Piping and Instrumentation Diagrams or Engineering Flow Diagrams, single line drawings, schematics and the ability to read and understand Standard Operating Procedures
  • Degree or Certifications in E&I related field
  • Two Years of Electrical and Instrumentation Maintenance experience
  • Extensive prior maintenance experience demonstrating knowledge and ability
  • Computer Skills (Microsoft Office; Outlook, Word, Excel)
  • Demonstrate attention to details, organizational skills, initiative, and communication skills
  • Experience in a manufacturing environment
41

Electrical & Instrumentation Technician Resume Examples & Samples

  • Proficiency with Rockwell Automation’s SLC and Control Logix processors using RSLogix 500 and RSLogix 5000
  • Proficiency with RSNetworx for DeviceNet and DeviceNet networking technology
  • Proficiency with RSNetworx for ControlNet and ControlNet networking technology
  • Proficiency with RSFieldbus for Foundation Fieldbus and the ability to understand, troubleshoot, and configure instruments on the network
  • Proficiency with Schubert machinery programming software
  • Proficiency with Windows software
  • A working knowledge of FTView SE
  • A working knowledge of Wonderware
  • A working knowledge of Ethernet networking and ability to troubleshoot
  • Ability to work with and troubleshoot FTBatch
  • Ability to work with and troubleshoot Factory MES
  • Ability to work with and troubleshoot PanelView software
  • Ability to work with and navigate through FTTransaction Manager
  • Ability to work with and navigate through SQL Server 2005
  • Ability to interpret European machinery and programming
  • A strong working knowledge of using various programming and diagnostic software packages to configure and troubleshoot
  • Preventative and unplanned maintenance for 480V 3 phase substations switches to 120VAC, 24VDC individual field devices. Components include, but not limited to, main switchgear, variable frequency drives (VFD), motor starters, motor protection devices, discreet I/O (limit switches, photoeyes, proxs etc.), generators, transformers, and interconnecting wiring
  • Full understanding of the facility’s’ power distribution system
  • Maintains equipment in compliance with National Electric Code (NEC) and Occupational Safety and Health Association (OSHA) rules and regulations
  • Maintains electrical equipment in compliance with the facility’s GMP rules and Food Safety guidelines
  • Ability to read and interpret electrical schematics and manuals
  • Documents all maintenance activities both electronically (Megamation) and written (equipment log books) in an audit ready format
  • Have operation knowledge of the process in the three major areas, Utilities, Processing, and Packaging
  • Assists mechanical maintenance personnel when necessary
  • Participates as team member and understands and applies LEAN principals used in the facility’s continuous improvement initiatives
  • Uses appropriate bench calibration/simulation equipment to accurately maintain instruments
  • Conducts calibrations as required for equipment regulated by waste water permit, storm water permit, and discharge air permit
42

Hvac & Electrical & Instrumentation Technician Resume Examples & Samples

  • Read, comprehend, and interpret instrumentation and HVAC data sheets, schematics, P&ID’s, blue prints and instructional guides
  • Read, comprehend, and interpret the National Electric Code and install and maintain equipment accordingly
  • Troubleshoot and repair electrical, instrumentation, PLC, VFD, motors and HVAC equipment and systems
43

Tetra Electrical Instrumentation Technician Resume Examples & Samples

  • Respond to machine breakdowns due to electrical malfunctions or hardware/software failure (PLC/ladder logic, hard wire)
  • Conduct preventative maintenance tasks for equipment including UPS back ups, machine PMs and video jets
  • Install and troubleshoot new and modified equipment
  • Associates Degree in Electronics, Electrical Engineering or related education preferred
  • Experience with computers, PLCs, reading blueprints and schematics
  • During electrical troubleshooting, an electrician must be able to track down the source of power failure (i.e. the electrician would be checking for incoming power and blown fuses, troubleshooting software in the PLC, checking sensors/photo eyes, checking sequences, etc.)
  • Good communication skills and prioritization skills are required
44

Electrical & Instrumentation Technician Resume Examples & Samples

  • Be familiar with instrumentation transmission signal types, including pneumatic, analog, discrete, and digital
  • Disassemble, repair, and assemble control valves
  • Knowledge of DCS configuration
  • 5+ years exp
45

Electrical Instrumentation Technician Resume Examples & Samples

  • Panel design
  • Industrial Network knowledge on Device Net
  • Allen Bradley PLC programming
  • Allen Bradley HMI programming
  • Plant network administration
  • AutoCAD reading and editing
  • Project Management for automation projects
  • Mechanical maintenance, equipment inspections, and plant PMs to support production
46

Electrical & Instrumentation Technician Resume Examples & Samples

  • Electrical Trade Certificate and WA 'A' Class Licence are mandatory
  • Instrumentation Certificate IV qualification is highly desired but not essential
  • HV Switching qualification preferred but not mandatory for this role
  • Post trade experience in mining or industrial maintenance fields will provide a sound foundation for this position
47

Electrical & Instrumentation Technician Resume Examples & Samples

  • Must be an electrical or instrumentation journeyman or have an associate’s degree in Electrical, Electro Mechanical Technology, Instrumentation or equivalent
  • Proven and demonstrated commitment to safety procedures and policies
  • Demonstrated understanding of Pulp & Paper equipment, processes, and systems
  • A motivated self starter with excellent work ethic and demonstrated ability to work with minimal supervision
  • Demonstrated commitment to continuous improvement
  • Demonstrated ability to communicate (written & verbal) to all levels of the organization
  • Recognizes and supports training and personal development
  • Demonstrated ability to evaluate, prioritize, and make timely decisions in emergency situations
  • Working knowledge and support of planning and scheduling functions
  • Familiarity with SAP, MWS or an equivalent CMMS
  • Demonstrated knowledge and support of predictive/preventive maintenance programs
  • Comfortable working in a team environment
  • Possess the competence and the initiative to learn the technology necessary to support the Mill
  • Excellent communication, organizational and administrative skills
  • Two years of recent industrial maintenance experience
  • DC/AC drive and drive control systems experience. (Preferably GE)
48

Cincinnati Plant Electrical & Instrumentation Technician Resume Examples & Samples

  • 5-year minimum experience supporting machine control systems
  • 1910 Certification
  • Solid understanding of Rockwell’s PLC’s, PLC programming, Variable Frequency Drives, and HMI
  • Solid understanding of servos, encoders, linear actuators, pneumatically operated equipment, sensors
  • Proven ability to quickly and effectively trouble shoot and repair power and controls related problems with packing equipment
  • Strong ability to access and comprehend technical manuals via the internet, and interact with external technical resources while addressing problems
  • Past success working closely with plant mechanically and electrically skilled technicians
  • Ability to work within a team environment
  • Strong organizational, critical thinking and problem solving skills
  • Ability to work effectively with individuals and with groups
  • Self-motivated and able to work independently with minimal direct supervision
  • Support process to control changes in the programmable systems
  • Develop and maintain Standard Operating Procedures and ensure they are followed
  • Troubleshoot in-depth PLC, and other control system related problems and train/assist others in accomplishing task
  • At times work long hours and weekends to keep critical processes running,
  • Understand the communication links between the PLC’s, servos, HMI, etc
  • Participate in maintenance on power and controls equipment
  • Participate in controls upgrade projects in the Department
  • Support Capital Improvement projects for Controls Systems in the Department
  • Utilize computers for programming machine operation
  • Project resource for Electrical Systems
  • Operate high speed making, packing and other production related equipment
  • Perform the necessary physical activity for purposes of operating, maintaining, and troubleshooting equipment including
49

Electrical & Instrumentation Technician Resume Examples & Samples

  • Responsible for maintaining E&I work order backlog via plant provided work order systems
  • Maintain electrical and instrumentation material inventories
  • Maintain required calibration reports
  • Required to observe safe work practices as outlined in NFPA70E, “Standard for Electrical Safety in the Workplace.” Or Solenis LLC. safe work practices
  • Must possess a minimum of an Oregon LME (Limited Maintenance Electrical) license or better
  • Degree in industrial process controls and instrumentation (preferred, not required)
50

Electrical Instrumentation Technician Resume Examples & Samples

  • An Electrician is accountable for the proper diagnosis and repair of plant electrical equipment. Errors can result in product spoilage/loss, material loss, equipment repair or replacement, downtime and overtime
  • Accountable for the safety of other employees while operating equipment
  • Accountable for complying with applicable FDA (GMP), USDA, OSHA and Abbott/Ross regulations, policies, procedures or guidelines
  • Five years OJT experience in electrical machine troubleshooting
51

Electrical & Instrumentation Technician Resume Examples & Samples

  • To carry out activities associated
  • With the Functional Safety lifecycle of Safety Instrumented Systems as defined by BS EN 61511,
  • Installation work, inspection, detailed and close/visual of Hazardous Area equipment in both Gas and Dust Zones, as defined in BS EN 60079
  • Testing and remedial work on Combustion Emission Monitoring Systems (CEMS) to BS EN 14181 and measurement of particulates to BS EN 13284 as defined by QAL 3 for MCerts,
  • Testing and remedial work on Waste Water instrumentation to MCerts for discharge to Water,
  • Safety checks on electrical systems and calibration work on instrumentation systems for legislative regulations in accordance with procedures laid down to ensure compliance with our COMAH, PPC, ISO 9002/14001 accreditations,
  • With fault diagnosis, on-line and off-line, of hardware, software and editing of DCS systems including HMI’s
  • To work on HV systems and protection/control methods i.e. OCB’s, ACB’s and Power factor correction units
  • To issue Permits to Work for specific areas e.g. boiler houses and compressor houses
  • To isolate electrical equipment and issue safety documentation
  • To form and fabricate components and parts, using machine and hand tools, working from graphical, written or verbal directions
  • Maintain a working understanding of all process equipment, systems and utilities, undertaking training where necessary in order to perform maintenance effectively
  • Analyse malfunctioning systems and/or equipment and recommend/carry out corrective action
52

Electrical & Instrumentation Technician Resume Examples & Samples

  • Debug and troubleshoot automation control systems, including PLC’s HMI’s, Servo’s and instrumentation
  • Able to Debug and troubleshoot automation control Networks (i.e., EtherNET, ControlNET, DeviceNET, Profibus, ASI bus, Legacy industrial control networks, and similar systems as found in the Plant)
  • Able to create drawings, including schematics, P&ID, and one-line diagrams Network layouts, Control Panel Designs
  • Skill in troubleshooting controls and instrumentation problems on production equipment and applying test procedures
  • Skill in the use, troubleshooting and modification of programmable logic control (PLC) systems (such as Allen-Bradley, Siemens, etc.,)
  • Able to read one-line diagrams, P&ID’s, blueprints and schematics
  • Working knowledge of hand and power tools
  • Highly desirable, but not required
53

Electrical / Instrumentation Technician Resume Examples & Samples

  • You will plan, troubleshoot, repair, and install wiring circuits, transformers, motors, protective devices, switches, control devices, alarm systems, and lighting systems
  • You will maintain, test, repair, and service generators, transfer switches, and appurtenant equipment
  • You will also be responsible for designing, installing, testing, calibrating, maintaining, and repairing electronic process control systems and components, data acquisitions systems, including flow measurements, level measurement, process control systems and instrumentation, programmable logic controllers and alarm systems
  • Contacting vendors and other agencies is also part of the role so that you can determine availability, applicability, and performance of equipment and components; you-ll purchase required parts and equipment; maintain accurate records of work performed, materials used, and associated costs
  • Engineers will work with you to specify or recommend equipment, designs for equipment, process control, and data acquisition systems; inspects and tests components installed by contractors
  • You will have on-call requirements for a 7-day consecutive period on a rotating basis; which means you-ll respond to emergency calls and works overtime as required; you-ll also complete paperwork as needed for cost reports and work logs .Monday-Friday Day Shift
  • Providing excellent customer service to customers and business partners comes naturally to you!
  • WITH Journeyman certification - Minimum of FOUR (4) years industrial experience in the installation, maintenance, and repair of electrical, instrumentation and control systems
  • WITHOUT Journeyman certification - Minimum of 8 - 10 years to be considered
  • Must be self-motivated, hardworking, professional, team oriented, and take pride in exceeding expectations
  • Must be authorized to work in the United States
54

Industrial Electrical & Instrumentation Technician Resume Examples & Samples

  • Maintaining PSM critical equipment to ensure it will reliably perform its function
  • Maintaining equipment installed in electrically classified areas
  • With appropriate electrical qualifications, certification, experience, and/or training, can work on 480 - 4160 voltage equipment
  • Perform other advanced tasks such as Thermography, Interlock Testing, Calibrations, etc
  • Basic understanding of process control
  • Strong mechanical and electrical aptitude and troubleshooting skills
  • Knowledge of safety and environmental regulations
  • Ability to work flexible schedules including an on-call schedule, evenings and weekends as needed
  • Ability to do moderate to heavy stair climbing (including vertical ladders), along with the ability to work above floor surfaces (heights)