CNC Resume Samples

4.6 (77 votes) for CNC Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the cnc job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Resume Builder
CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.
USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.
SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Create a Resume in Minutes
CK
C Konopelski
Carey
Konopelski
35889 Vince Rapid
Phoenix
AZ
+1 (555) 158 9599
35889 Vince Rapid
Phoenix
AZ
Phone
p +1 (555) 158 9599
Experience Experience
Boston, MA
CNC Machinists
Boston, MA
Jaskolski-Jacobi
Boston, MA
CNC Machinists
  • Machining large parts (60-65 inches in diameter)
  • Operating multiple machines
  • Reading blue prints
  • Editing codes (G-codes)
  • Reading blueprints, following work instructions
  • Machining parts to within tolerance
  • Setting up and operating CNC mills and lathes machine
Houston, TX
CNC Technician
Houston, TX
Schoen-Lakin
Houston, TX
CNC Technician
  • All work will be performed with safety in mind for yourself, coworkers and equipment at all times
  • Creates a positive work environment by demonstrating and sharing functional / technical knowledge
  • To always be looking at ways to improve processes to increase productivity in a controlled setting. Kaizan and CI teams will be a big part of our improvements
  • Trains and assists CNC operators in insert changes and minor offset adjustments
  • Creates and maintains Work Instructions and Visual Aids
  • Train and assist CNC operators in insert changes and minor offset adjustments
  • Exchange work knowledge and provides training for members of the CNC/Set-up department
present
Chicago, IL
CNC Maintenance Technician
Chicago, IL
Kautzer-Conn
present
Chicago, IL
CNC Maintenance Technician
present
  • Troubleshoot hydraulics, electronics, and software, electrical, pneumatic and mechanical systems. Use machine tool manuals, technical documents, internal and vendor resources to research machine issues
  • Equipment may include Haas, Mazak, Amada, Fanuc, Marvel, Hem etc
  • Communicate with the customer to determine machine problem
  • Identify and replace parts as necessary. Test and make adjustments
  • Communicate with the customer and follow-up with customer after the repair is complete
  • Comply with safety regulations and maintain a clean and orderly work area
  • Valid driver’s license. Clean driving record
Education Education
Bachelor’s Degree in Manufacturing
Bachelor’s Degree in Manufacturing
University of Central Florida
Bachelor’s Degree in Manufacturing
Skills Skills
  • Express and discuss job/task related concerns in a productive, professional manner
  • Comply with all quality policies, specifications, regulations and instructions
  • Ability to perform basic mathematical computations, Ability to apply concepts such as fractions, percentages, ratios and proportions and to practical situations
  • Ability to run multiple machines (All programs)
  • Comply with all quality policies, specifications, regulations, and instructions
  • Contribute ideas and experience, discuss job/task related concerns in a productive, professional manner
  • Able to share points of view, and provide constructive feedback to and receive feedback from fellow team members
  • Load and run CNC programs from within machine control file structure
  • Use measurement devices such as calipers, pin gages, micrometers, etc., to inspect finished machined parts
  • Inspect parts for defects, apply part protection, and stage for next higher assembly operations
Create a Resume in Minutes

15 CNC resume templates

1

Cnc Engineer Resume Examples & Samples

  • Manage the Machining Process design for new and existing products
  • Participate in feasibility studies for new machining projects
  • Work with suppliers and manage the Machining Fixture and cutting tool design & build for new and existing projects
  • Specify Capital equipment where required
  • Propose Machining concepts and cost profiles for New Projects
  • Specify and Manage secondary processes for castings where applicable
  • Manage the inventory of cutting tools and consumable products for the machining process
  • Participate / Lead the system for spare / back up fixture components and cutting tools
  • Lead the production team to develop machining processes that meet engineering specifications for new and existing projects
  • Design and manage the implementation of DOE’s on the machining process to identify optimal process parameters that meet Cpk requirements
  • Identify cost reduction opportunities
  • Trouble shoot the machining process to reduce the cycle time, downtime, and scrap
  • Participate / Lead root cause investigations into machining defects and downstream production scrap
  • Train production operators
  • Where necessary run production equipment
  • Set production tooling into the machining equipment when required
  • Participate in the creation of Advanced Quality Planning Documentation
  • Create standardized work / work instructions for the Machining process
  • Review first Piece and Last piece inspection documentation for machining quality and integrity
  • Work with Equipment Engineering and vendors on fixture and equipment corrections
  • Identify and implement best practices for the machining and secondary processes
  • Promote a safe work environment
  • Ensure that the machining processes meet Environmental Regulations
  • Perform Process and Layered Audits on the Machining Process to ensure compliance
  • Where requested assist other departments in business objectives
  • Perform Tasks as requested by Tesla Management
2

CNC Machining Set Up Technician Resume Examples & Samples

  • CNC set-up, adjust machines and light troubleshooting. Act as lead technician
  • Demonstrated ability to perform standardized work process and defined work instructions
  • Understands and ensures adherence to required procedures and processes
  • Evaluates the assembly processes and equipment to look for continuous improvement opportunities
  • Excellent written and verbal communication skills and people skills, comfortable presenting ideas and issues to peer groups and leaders
  • Escalates functional and process failures to the appropriate support groups and leaders
  • Capable to develop and follow non-verbal communication (visual management: signs, work place organization, and pictures)
  • Assist in the process design and tooling improvements – comfortable in suggesting and implementing new ideas that improve quality, reduce cost, support production work environment
  • Understands that there are always new opportunities for improvement and eliminate waste
  • Ability to learn quickly and self-motivated
  • Positive energy and attitude, happy
  • Poise when confronted with sudden setback or stressful situations
  • Willingness to operate in a dynamic environment and team structure
  • Working for extended periods of time
  • Lifting objects up to 15kg
  • Use of tools that may produce vibration during use
  • Use of complex tooling that requires specialized training
  • Wearing Personal Protective Equipment: safety glasses, vests, shoes, hard hats
  • Physical work including but not limited to pushing, pulling, gripping, twisting, reaching, etc
  • Ability to follow a required specific sequence of steps in a process repetitively for an extended period of time
  • Ability to understand codes used to make decisions
  • Ability to detect abnormalities in the process using visual, touch, or auditory senses
  • Ability to adjust to immediate process change due to process/shop improvement
  • Perseverance in extensive process root cause analysis and countermeasure implementation
3

Cnc Technician Night Shift Resume Examples & Samples

  • Coordinates with Spinning, Tool & Die, Maintenance, Engineering and Q.A. personnel to work on parts and on continuous improvement projects as required
  • Trains and assists CNC operators in insert changes and minor offset adjustments
  • Exchange work knowledge and provides training for members of the CNC department
  • In co-ordination with Maintenance and Tool Room, assists in the maintenance of tooling and machines to ensure lathes are kept to the highest standards
  • Treats everyone with dignity, trust and respect
  • Ensures all safety precautions and procedures are followed and works within the guidelines and rules of the plant. Wears personal protective equipment as required at all times. These include safety glasses, hearing protection, safety shoes, gloves, etc
  • Initiate and embrace company change
  • Reports any none conformance to the CNC Manager
  • Recommend changes to continuously improve tooling and processes
  • Complies with the designated ISO/TS16949 responsibilities related to effective environmental management in accordance with Roto-Form's Environmental Management System (EMS)
  • Performs any other reasonable duties or assignments by management
  • College diploma in CNC Machining preferred
  • Must be able to effectively communicate in English both written and spoken
  • Practices and maintains integrity while following Roto-Form's / Magna Powertrain's Charter and Employee Handbook
4

CNC Tech Resume Examples & Samples

  • Setting up and operating CNC Machines independently
  • Master Cam Programming
  • Understanding Machine control functions and how to input data
  • Produces parts within required tolerances
  • Provide finished part verification
  • Takes care of routine machine maintenance and keeps work area in neat condition
  • Follows all safety rules regarding machine operation and proper guarding
  • Maintains records on work orders handled and quantities produced
5

CNC Sustaining Engineering Manager Resume Examples & Samples

  • Establish a robust maintenance organization, that provides 24/7 coverage for CNC
  • Drive continuous improvement on equipment to provide competitive cost
  • Drive engineering solutions to increase production output, efficiency, waste reduction and cost improvements
  • Work with cross functional team to create efficient job station layouts and improved equipment process flow
  • Understand machine capacity, create machine line loads and implement equipment contingency plans
  • Develop new tooling and fixtures to improve operations
  • Create, track & use metrics that emphasizes safety, quality, efficiency & cost
  • Partner with CNC Production Management, Process Engineering, and Production to develop and execute production ramps
  • Setting up quality gates and quality assurances in line
  • Maintain and ensure compliance with process documentation for standardized work
  • Complete new job time studies using prototype, conceptual and/or final parts
  • Utilize systems like MES to ensure accuracy of product builds and consumption
  • Work with production Control to improve logistic methods and control inventory levels
  • Manage team Maintenance Supervisors, Maintenance Engineers, and Technicians
  • Provide equipment availability for Production
6

CNC Tech, Team Lead Resume Examples & Samples

  • Measure dimensions of finished work pieces to ensure conformance to specifications, using precision measuring instruments, templates, and fixtures
  • Mount, install, align, and secure tools, attachments, fixtures, and work pieces on machines, using hand tools and precision measuring instruments
  • Stop machines to remove finished work pieces or to change tooling, setup, or work piece placement, according to required machining sequences
  • Transfer commands from servers to computer numerical control (CNC) modules, using computer network links
  • Check to ensure that work pieces are properly lubricated and cooled during machine operation
  • Set up and operate computer-controlled machines or robots to perform one or more machine functions on metal or plastic work pieces
  • Review program specifications or blueprints to determine and set machine operations and sequencing, finished work piece dimensions, or numerical control sequences
  • Listen to machines during operation to detect sounds such as those made by dull cutting tools or excessive vibration and adjust machines to compensate for problems
  • Remove and replace dull cutting tools
  • High school diploma or general education degree (GED) preferred
  • Past experience in operation of machining and assembly equipment needed
  • CNC’s
  • Siemen’s controls
  • Fanuc robots
  • Basic electrical skills
  • Basic hydraulics&#8217
  • Experience leading and managing others
  • To work within guidelines of the company rules and guidelines to comply with MIOSHA standards
  • Ability to trouble shoot the production cells if down time would occur
  • At times this person may be asked to run the equipment in a production setting
  • Tooling and fixture changes will be required
  • Kaizan and Continuous improvement teams will be critical
  • The ability to read layout data, gages and dedicated measuring equipment is needed
  • Documentation must be filled out in a legible and timely manner
  • Will assist all departments as needed
7

CNC Specialist Resume Examples & Samples

  • 3-5 years’ experience in Prototyping or Model Making
  • Accredited certification in design or a related field or equivalent in work experience
  • 1+ years’ experience in Machine Shop Practices
  • Strong mechanical aptitude and problem solver
  • Computer skills required, knowledge of Windows and Microsoft Office
  • Basic Working knowledge of 3D CAD like Solid Works
  • Strong working 3D CAD knowledge
  • Working knowledge of CAM programming system
  • Knowledge of specialized skills including Laser etching
  • Experience working in a Prototyping environment
8

CNC Manager Resume Examples & Samples

  • Interacts and communicates with the Production Department in planning, and scheduling all production activities in such a way that at all times, a clear view of our delivery situation is maintained and all possible factors Plant wide are considered
  • Actively and positively support the continued practice of Core Values behavior
  • Initiate and embrace change within the company
  • Maintain good communication with employees to increase productivity and reduce scrap etc. Create a team orientated atmosphere
  • Interface with supervisors and department managers to ensure open communication
  • Troubleshoot or assist in the troubleshooting of production problems as they arise
  • Make recommendations for the improvement of equipment and processes
  • Perform tooling/process trials and support continuous improvement
  • Maintain a budget, controlling inventory of tooling and other items as required
  • Ensure all work instructions are followed and staff has received the correct training in set-up sheets, safe equipment, useable tools and effective processes
  • Complete and review performance appraisals for the department
  • Follow up with suggestions from operators where applicable
  • Performs any other reasonable duties or assignment as assigned by your supervisor or management
  • Champion 8D and NCR issues related to the CNC process, working with required resources through root cause analysis to find solution and implement irrevocable corrective actions
  • Trains the CNC Technicians in the set-up of production jobs
  • Minimum three years of experience as CNC setup technician /programmer in an automotive manufacturing environment
  • Mechanical college diploma majoring in CNC and/or equivalent experience
  • Previous supervisory and leadership experience
  • Minimum two years of experience in Robotic operation and programming
  • Team oriented approach to problem solving
  • Must possess leadership abilities
  • Strong people and organizational skills
  • Demonstrated ability to communicate in effectively in both written and spoken English
  • Practices and maintains integrity while following Magna's Charter and employee handbook
  • Knowledge of SPC Level 1, Lean Manufacturing and 5S
9

CNC Specialist Resume Examples & Samples

  • Accredited certification in manufacturing, technology or design, or related experience
  • 3 years’ experience in Model Making or CNC Programing and machining, 5 Axis experience preferred
  • 3 years’ experience building, fabricating and CNC machining class A appearance models and engineering prototypes
  • Knowledge of 5-axis programming, set-up and machining
  • Ability to create 3D CAD models and fixtures using Pro/E, NX and/or Solid Works
  • Machining skills using vertical mills, lathes and other machine tool equipment
10

CNC Technician Resume Examples & Samples

  • Perform tooling preventative maintenance as required
  • Maintains a high standard of housekeeping and a safe work area at all times
  • Ensure that all set-ups and repairs are done in a manner that will ensure the Company’s objectives with respect to minimizing downtime, scrap and tooling costs
  • Follow the guidelines and rules as set out in the employee's handbook and company policies
  • Produces parts to close tolerance, specifications and punctually to ensure high productivity and part quality
  • Ensure that First Off’s are completed on time
  • Report to the Supervisor or Lead Hand to determine priorities
  • Report to your Manager any problems that would affect the smooth operation of the department
  • Grade 12 or equivalent with minimum 2 years CNC programming and Set-up experience
  • Able to read blueprints
  • Advanced knowledge of machining
  • Creates a positive work environment by demonstrating and sharing functional / technical knowledge
11

CNC Set Up Technician Resume Examples & Samples

  • CNC set-up, adjust machines and light troubleshooting
  • Acts as a consultant to other production/engineering groups on quality issues
  • Analyze quality data to determine and drive the desired outcome
  • Ability to understand machine code in programs (this will be instructed on the job as a developing skill)
  • Ability to change cutting tools, measure and set-up
  • Responsible for monitoring tool life and part finish, and report back to the Tooling Engineer
  • Ability to detect abnormalities in the process
12

CNC Maintenance Engineer Resume Examples & Samples

  • Perform repairing the machines breakdowns upon the request of production department
  • Define procedure for maintenance activities (preventive, corrective and predictive, spare part management )
  • Evaluate availability of replacement parts for key manufacturing equipment
13

CNC Grinding Specialist Resume Examples & Samples

  • Set up, operate and adjust CNC grinders to produce fuel systems component parts to tight tolerances
  • Applying safe working methods
  • Minimum of 1 year CNC machining experience
  • Minimum of 1 year grinding and/or lathe experience
  • Intermediate proficiency reading and interpreting blueprints
  • Strong commitment to safety
  • Must be able to work any shift / schedule as shifts / working hours will change with business needs
14

CNC / Screw Machines Set Up-rd Shift Resume Examples & Samples

  • Knowledge of CNC code & tool nomenclature
  • Ability to interpret Manufacturing instructions
  • Mechanical aptitude
  • Ability to do shop math
  • Ability to interpret shop blueprints
  • Strong safety, attendance and performance record
  • Self-Directed Team Player
  • Ability to identify specific dispensable tooling based on application (drills, taps, form tools, etc.)
  • Proper nomenclature for tooling
  • Technical Degree in Machine Tool Technology or Metal Removal Theory from an accredited technical school / equivalent degree
15

CNC Field Service Technician Resume Examples & Samples

  • Assists in the training of other technicians and travel to support remote work sites and business startups nationwide will be required
  • Experience diagnosing, troubleshooting and repairing mechanical systems such as conveyors, filtration systems, and coolant systems to OEM specifications
  • Experience troubleshooting, repairing and working safely with 480v 3 phase electrical components
16

Weekend Shift CNC Brake Operator Resume Examples & Samples

  • Expert level in interpreting blueprints and production orders with the ability to train others
  • Set-up and operate CNC Amada brake presses
  • Verify material requirements and quantities to B.O.M. specifications
  • Interpret decimal dimensions from drawings and ability to measure with calipers
  • Properly maintain equipment in accordance with TPM requirements
  • Reports any machine malfunctions, defective parts or safety hazards
  • Know and follow established job specific and site wide health and safety procedures and rules
  • Bring health and safety issues, unsafe acts and safety suggestions to management’s attention
  • Actively participate in accident, injury and illness prevention activities
  • Identify and correct hazards and unsafe conditions
  • Adhere to 5S standards and requirements for proper area maintenance
  • Minimum 1 year experience operating CNC machinery
  • Minimum 1 year experience working with micrometers and calipers
  • Must be able to work in the US without Company sponsorship
  • Ability to hold tolerances of +/- .010 across multiple bends
  • Ability to work in a fast-paced environment while maintaining safety and quality priorities
  • Ability to perform all job functions in adherence to Eaton’s philosophy and values, policies as well as the Environmental, Health and Safety standards
  • Ability to engage in repetitive motion and tolerate exposure to varying temperatures
  • Ability to wear required personal protective equipment as required by company policy and procedure
  • Amada CNC Press Brake set up and operation experience is preferred
  • NC-9 and NT controller experience is preferred
17

CNC Turret Setup Operator Resume Examples & Samples

  • Maintain orderly working and storage area
  • Troubleshoot various machinery problems
  • Perform additional related duties as required
  • Utilizing tools and equipment which include micrometers, calipers, tape measures, rulers, protractors, personal protective equipment and punch press setup tools
  • Able to stand on feet continuously during working shift
  • Able to lift 25 pounds consistently without assistance, 75 pounds occasionally with assistance
  • Repetitive wrist, elbow and arm movement continuously throughout work day
  • Must be able to wear required PPE as required by company policy
  • High school diploma or GED from an accredited institution is required
  • Minimum of 1 year experience doing setups on turrets is required
  • Must be legally authorized to work in the United States without company sponsorship
  • Must reside within a 50 mile radius of work location; no relocation benefit offered
  • Experience with Armada CNC turrets
  • Ability to use measuring tools
  • Ability to read, interpret and operate from prints and shop drawings
  • Ability to work flexible hours to support overtime requirements
  • Able to work and produce effectively with minimal supervision
  • Ability to communicate well with all levels of organization
18

Cnc Mach Spclt Resume Examples & Samples

  • Troubleshoots highly complex programs, and makes necessary edits to achieve extremely close tolerances. Ensures programs are optimized to maximize production and keep the programmers up to date with program edits. Adjusts machines to maintain measurements and continuous operation, as well as monitors for tool breakage and wear
  • Works closely with engineers using drawings, sketches and verbal instructions to develop manufacturing processes and design enhancements for pre-production parts
  • Creates 5 axis CNC machining programs using advanced programming software directly from CAD models or by creating the necessary geometry per specifications
  • Directs the work for the machining processes and assists other machinists as necessary
19

CNC Setup Operator, nd Resume Examples & Samples

  • Responsible for reading and interpreting blue prints including GD&T
  • Read, write and edit programs in G-Code and other CAD/CAM software and identify areas of opportunity for program efficiency
  • Verify revision levels on method sheet, tooling sheet and router match, alerting Supervisor if discrepancies are found
  • Identify, document and dispose of scrap
  • Must setup and load material into a bar feeder/bar loader. Step through program and make offsets to complete a part to print specifications
  • Verify revision levels on router and method sheets
  • Install appropriate tooling and touch off
  • Change inserts, drill boring bars, etc. when needed and return all usable tooling to the tool crib. Recycle all Carbide tooling
  • Troubleshoot any production issue in regards to machining and getting assistance for program related issues
  • Add hydraulic oil and/or cutting fluids to the machine(s) when needed
  • Make appropriate offsets and/or speed and feed adjustments to program if needed to maintain part quality
  • Train others and share knowledge
  • Obey all safety rules and stop work if continuing is unsafe or will create an unsafe condition. Report all safety concerns immediately
  • Perform any other tasks as assigned by the supervisor
20

CNC Machining Engineer Resume Examples & Samples

  • BS in Engineering, preferably a BSME or equivalent
  • Strong project management skills - Knowledge of AutoCADand/or ProE
  • Computer skills is highly needed - Ability to work towards completion of projects within defined schedules
  • Manufacturing engineering experience in a machining environment is preferred
  • Strong interpersonal skills, including the demonstrated ability to work effectively in a multi-cultural environment
  • Demonstrated ability to organize and prioritize a rapidly changing set of objectives
  • Cam equipment knowledge and experience is a plus. - Lean manufacturing certifications are a plus
21

CNC Machinists Resume Examples & Samples

  • Communicate with technician and supervisor any issues that may arise during operations
  • Use of inspection tools, independently complete quality inspection documentation, and make necessary adjustments, understand gauging and visual inspection tooling, attention to detailed processes
  • Understanding of GD&T is a plus
  • Inspection equipment experience, proven record of using inspection data to make mechanical and program changes to achieve part specs
  • High level mechanical and manufacturing skills
  • Demonstrated leadership qualities preferred
  • Ability to lift 50 lbs
  • Read, write, and communicate efficiently
  • Minimum High School Diploma or GED
22

JD Edwards CNC Consultant Resume Examples & Samples

  • Must have prior experience working with multiple version of JD Edwards Xe , 8.0, 8.11, 8.12, 9.0, 9.1, 9.2
  • Must possess experience in implementations and upgrades
  • Experienced in web server installation, application security, system troubleshooting, OMW
  • Technical configuration and tuning
  • Server database administration and tuning
  • Package build and deployments
  • Applying ESUs/ASUs
  • Participates actively in team and client meetings
  • Must be self-motivated and highly motivated to perform in fast paced environments
  • Must demonstrate “Willing to perform and deliver whatever it takes” attitude
  • Possess leadership attributes
  • Drive to continually improve effectiveness, technical skills and vendor/industry knowledge
  • Must have substantial experience as a consultant doing project-based work
  • Must have the ability to multi-task and organize effectively to meet client expectations working as part of a larger team
  • Must provide accurate and consistent status reports to clients and other stakeholders
  • Adaptable to different client work environments
  • Must have the ability to multi-task and organize effectively to meet client service level expectations
  • Adept and proactive at problem solving and conflict resolution
  • Demonstrate strong analytical skills and develop solutions to problems independently and through facilitated team discussions
  • Ability to actively participate in team and client meetings
  • Motivated and shows initiative
  • Great organizational and time management skills
  • Prioritizes workload, meets deadlines and manages competing priorities under pressure
  • Adaptable to multiple client work environments
23

CNC Maintenance Technician Resume Examples & Samples

  • Minimum 8 years recent experience in the repair of CNC machines with familiarity of Fanuc controls. 4+ axis experience a plus
  • Must be able to communicate effectively in English (written and verbal) as it relates to the job
  • Strong understanding of and familiarity with electromechanical, pneumatic, and hydraulic systems, including servos, proximity switches, and solenoid valves
  • Ability to read and interpret electrical, pneumatic, and hydraulic schematics to accurately diagnose problems
  • Ability to perform precision alignment of machine kinematics in the event of a collision
  • Must be methodical and adhere to good documentation practices
  • Solid understanding of technical drawings and specifications
  • Must be adaptable to a changing work environment, competing demands and able to deal with frequent change, delays or unexpected events
  • Experience working in a Windows-based Network environment
24

CNC Charge Resume Examples & Samples

  • Strong planning, analytical and written skills
  • Ability to utilize and coach others in the nursing process
  • Ability to utilize database, spreadsheet, word processing to conduct analysis of statistical reports
25

Cnc-med Surg Oncology Resume Examples & Samples

  • Demonstrated competence with patient care information systems
  • Ability to educate, coach and mentor staff using adult learning principles
  • Identifies and effectively assists in implementation of strategic plans. Actively participates in department and hospital strategic planning and effectively implements new programs and services
  • Maintains an effective competency and staff development program
  • Responsible for day-to-day operations such as: processing payroll, managing department expenses, participating on hospital committees, processing employee evaluations, managing personnel issues. Does so in an effective and timely manner in order to meet the needs of the department and organization
  • Maintains a departmental staffing plan that meets the needs of the customer and is responsive to the changing census
  • Ensures compliance with TJC standards; federal, state and local regulatory guidelines
  • Communicates hospital needs and expectations as well as pertinent information to staff in a timely manner
  • Assures an appropriate skill mix and staffing levels in accordance with volume demands
  • Creates/fosters a positive environment; leads by example and by holding staff accountable for their behaviors and attitudes (compassionate, professional, communicative)
  • Implements all measures to insure patient safety including but not limited to
  • Understands Fall Policy and Core Measures and assures implementation of appropriate measures/precautions
  • Discusses safety precautions with patients and family
  • Understands Medication Safety Procedures and assures implementation of safe medication administration practices
  • Demonstrates knowledge of cost factors in the routine performance of duties; maximizes cost efficiency; implements resource management strategies
  • Executes job duties to achieve optimal productivity and efficiency
  • Maintains staffing patterns/numbers according to patient acuity, case load and in compliance with hospital policy
  • Analyzes systems and recommends appropriate system changes that enhance healthcare services and delivery
  • Is receptive to change or new ways of doing things
  • Exercises professional judgment when addressing problems as evidenced by a satisfactory resolution (approaches problem with systematic and critical thinking, utilizes appropriate resources, maintains a positive attitude, involves leadership when needed)
  • Effectively responds to issues/problems pertinent to departmental services that effectively meet the needs of the customers and staff
26

Machining CNC Engineer Resume Examples & Samples

  • Analyze requirements and make recommendations for facility systems, processes, training, equipment needs, and engineering product designs
  • Complete both specialized and broad-based assignments / projects which may require collaboration and integration with other functions
  • Evaluate projects and prepare feasibility studies to define desired results, assess value proposition and determine project plans
  • Analyze, provide specifications and perform acquisition for new or replacement machine tools
  • Perform capital forecasting correlation and reporting as it relates to new product introduction, product capacity increases, machine replacement and process continuous improvement
  • Perform process improvement activities to reduce material and machining cost
  • Analyze tooling failures and evaluate tool characteristics and requirements
  • Improve space utilization in manufacturing and office spaces
  • Develop and implement assembly processes in line with Caterpillar standard processes
  • University degree in a manufacturing engineering-related discipline
  • Thorough knowledge of manufacturing/machining CNC concepts
  • Minimum of 5 year of manufacturing/machining CNC engineering-related experience
  • Good communication, interpersonal and teamwork skills
  • Prior experience working in a manufacturing environment
  • Ability to work with a diverse group of employees and customers
  • NC programming and cutting tool selection
27

CNC Amada Turret Set Up Operator Resume Examples & Samples

  • Operate and setup turret punch presses
  • Must observe safety & environmental rules and regulations at all times
  • Understand and proficiently operate all press controls and fabrication equipment
  • Keep work areas clean and safe
  • High School education or GED from an accredited institution required
  • Minimum 1 year experience operating CNC machinery is required
  • Minimum 1 year experience working with micrometers and calipers is required
  • Only candidates in the geographic area of Denver will be considered. Relocation benefits are not provided for this position
  • Ability to work flexible hours including nights and weekends with advanced notice
  • Ability to work overtime
  • Ability to work effectively in a team oriented environment
  • Attention to detail and adaptability
  • Ability to bend, stoop, reach forward, and stand for up to 12 hours
  • Ability to pick up pans, fixtures, lamps, sheet metal, and small wires and parts
  • Ability to regularly lift 35 pounds without assistance and occasionally lift more than 35 pounds with assistance
  • Ability to use hand and power tools as required
  • 1 year of experience with Amada Turret set up and operation experience is preferred
  • 04PC controller experience is preferred
  • Good understanding of flat pattern development
28

CNC Expert Resume Examples & Samples

  • The position will be responsible for developing new machining processes in the manufacturing of composite structures and honeycomb core composites for aerospace applications
  • This is not a Tool/Tooling Engineer
  • We are looking for a researcher/process developer, process improvement expert. Someone that is an expert with machining/ drilling/cutting tool process development engineering
  • Individual will know machining processes, machining equipment and control systems, programming, and cutting tools technology
  • Individual will use their knowledge to develop optimal techniques and processes for machining various composite materials (different fiber/ resin combinations, honeycomb core, etc)
29

CNC Grinder Tech Resume Examples & Samples

  • Program and operate production CNC and conventional grinders
  • Run support machines as required
  • Repair and rebuild machines as required
  • Must have knowledge of close tolerances; be able to read micrometers and other similar precision measuring instruments
  • SPC Knowledge required
  • Must have good mechanical skills and be self motivated
  • Demonstrated commitment to continuous improvement
  • Demonstrated skills in the areas of communication, dependability and teamwork
  • Must be a problem solver, safety conscious, detail oriented and innovative
30

CNC Milling Resume Examples & Samples

  • Performs activities of
  • Electric welding, TIG, Plasma, Oxyfuel
  • Mechanical assembly, component adjustments, high power generator stators and rotors assembly
  • Manufacturing, reconditioning mechanical elements for electric rotating machines
  • Repairing the mechanical parts of the electric rotating machines
  • Mechanical assistance during the execution of the assembly and commissioning works of the generators and electric motors
  • Brazing components
  • Execution of mechanical operations in the manufacturing of electric components of the generator
  • Use and handle of the installations serving for the manufacturing of motors and generators components
  • Education: qualification as welder,
  • Qualification as brazing specialist would be a plus
  • Knowledge about electro-technic metallic materials used in the construction of machines
  • Licenses: Load binder
  • Experience in the field of generators production would be a plus
31

CNC Surface Grinder Resume Examples & Samples

  • At least 1 year exposure to surface grinding metal
  • Manual machining experience
  • Surface grinding using CNC
  • Experience grinding injection mold components
  • Job shop experience
32

Cnc Machining Production Leader Resume Examples & Samples

  • Responsible for the day to day operation of the T-wells production and T-wells team
  • Plan production in order to assure correct lead times and requested service levels
  • Estimate the necessary means and the manufacturing process for new product and its optimization
  • Responsible with the schedule for preventive maintenance of equipment
  • Measures work (efficiency, idle time, quality, etc.)
  • Create a continuous improvement program to drive efficiency (LEAN, Six Sigma, 6S)
  • Carries out process improvement, problem resolution, project management and employee training by maintaining compliance with established policies and procedures
  • Maintains safe and clean work environment by educating and directing personnel on the use of all control points, equipment and resources
33

Cnc Process Engineer Resume Examples & Samples

  • Writes programs online and offline for CNC lathes
  • Carries out process improvement, problem resolution, project management and employee training
  • Able to inspect parts as per technical specs
  • Performs first piece approval quality checks including using GD&T
  • Design, develop and manufacture tools and fixtures as needed
  • Responsible to develop and improve manufacturing processes
  • Performs improvement actions on CNC machines and processes
  • Create work instructions and work flows
  • Assess equipment, material and capacity needs
  • Maintains safe and clean work environment by educating and directing personnel on the use of all control points, equipment, and resources; maintaining compliance with established policies and procedures
34

JDE CNC Administrator Resume Examples & Samples

  • Monitor and manage EnterpriseOne performance and architecture and maintain the EnterpriseOne systems reliability, integrity and recoverability
  • Establish and maintain processes and procedures for implementing and maintaining the J.D. Edwards EnterpriseOne technical environment
  • Upgrade of EnterpriseOne and related components on Deployment server and Enterprise Servers
  • Installing and managing Oracle Weblogic, Oracle Application Server and E1 JAS Components
  • OMW configuration and project promotions
  • Server and client package build and deployments
  • Install and manage Business Services Server and related package deployments
  • Install and manage Real Time Event Server (E1 Transaction Server)
  • Apply ESUs, ASUs, Updates and Tools Release updates
  • Administration of print, batch queues, performance tuning and monitoring via SAW and Server Manager
  • Create and manage environments, pathcodes and instances
  • Create and manage multi-foundation for testing of new releases
  • Monitor and manage application system performance and availability
  • Monitor and manage the EnterpriseOne system backups/restores requirements
  • Monitors EnterpriseOne Jobs scheduled using third-party job scheduler (ControlM)
  • Provides troubleshooting of EnterpriseOne application and hardware
  • Understanding of high availability software’s and solutions
  • Keep current and up-to-date with application architecture, ESU and service pack releases, functionality, and other CNC components
  • Interact extensively with the other support groups to establish and support EnterpriseOne applications running on the corporate network
  • EnterpriseOne Security Administration
  • Initial setup, maintenance and coordination of users, user profiles and EnterpriseOne environment security
  • Develops and manages the access strategy by proactively working with management, process/data owners, auditors and other personnel
  • Provide reporting for audit and participate in yearly audit process
  • Develops and manages project plans for primary activities
  • Develops, maintains and tests EnterpriseOne Disaster Recovery procedures in coordination with Infrastructure and applications team
  • Researches, evaluates and recommends third party utilities to better the environment
  • Provides global Level 2 support for standard hardware, software (involves on call coverage 24x7 on a rotating basis)
  • Oracle 10g-11g, Microsoft SQL Server
  • Control-M, Bartender, Create Form!, SmartCommerce, HP OpenView, Boomrang,SolarWinds
  • MS Office products, Lotus Notes
  • EnterpriseOne 8.x to 9.x software and 8.9 to 9.1 Toolset
  • Various third party and in-house developed utilities to support performance and capacity planning activities
  • Conceptual knowledge of SAP Basis including security management, Agile, Siebel
  • VERITAS Cluster, RAC, BIG-IP(F5)
  • 4 or more years in IT
  • 6 or more years in IT
35

Production Associate, CNC / Extrusions Resume Examples & Samples

  • Operate CNC Mills and other CNC equipment. Learn the attention to detail needed to make parts to standards needed
  • Support the development of Process Failure Modes Effects Analysis (PFMEA) to identify critical risks in the production processes with the Manufacturing Process Engineers
  • Develop training programs and hire plans for production associates
  • Support issue resolution including root cause investigation & corrective action tracking
36

CNC Field Service Technician Resume Examples & Samples

  • Diagnoses, troubleshoots, maintains, and repairs process/production CNC machines and equipment as well as related mechanical equipment, such as pallets, fixtures, ball screws and spindles
  • Calibrates instrumentation, equipment, and controls for optimum performance
  • Must have the ability to work in a lift at heights of 40 feet or higher
  • Experience troubleshooting Allen Bradley / Siemens 7 / Fanuc /Mitsubishi 480 controllers
  • Experience troubleshooting Gantry/Robotic systems and controls (Fanuc, ABB, leihbeer, Etc)
  • Experience using ball bar and laser equipment for alignments, calibration, and compensations of CNC controlled machine tools
37

NC / CNC Setup & Operate Resume Examples & Samples

  • Review operations sheet data, tape readouts and blueprints. Occasionally uses Work Flow for reference purposes as required
  • Initiate and insure accurate tool settings and tape data input. Adjust machine setting using manual data input to correct variations
  • Make minor edits to program including work shift correction and z-depth excluding thread milling depths and diameter edits. Note and refer for correction discrepancies between operations sheet data and tape controlled operation
  • Perform similar or associated duties as required or directed, including the operation of auxiliary equipment such as manual tapping arms, grinders and sanders
  • Operate fork lift truck as required in performance of job duties
  • Participate in continuous improvement programs for the area. Maintain work area, machines, and control units in a clean, neat and orderly condition
  • Perform preventative maintenance functions as required. Follow prescribed or standard safety regulations
  • High school diploma or equivalent from an accredited institution
  • Minimum 1 year of machine setup experience
  • No relocation benefit is offered for this position. Only candidates residing within the immediate geographic area of Syracuse, NY will be considered for this position
  • Strong shop floor math skills
  • Ability to carry out moderate physical effort; equivalent to continuous light, frequent average, or occasional heavy manual effort applied
  • Ability to plan and perform unusual and difficult work where only general methods are available and the making of broad decisions involving considerable initiative and ingenuity
38

NC / CNC Setup & Operate Resume Examples & Samples

  • Setups exacting but easy to obtain using either developed fixtures or standard work holding devices
  • Review operations sheet data, tape readouts and blueprints
  • Insert control tape and set controls for manual operation
  • Adjust machine setting using manual data input to correct variations
  • Note and refer for corrections discrepancies between operations sheet data and tape controlled operation
  • Check first piece using fixed or adjustable gauges and obtain approval from appropriate supervision prior to initiating production runs
  • Exercise care to observe operation, and note and refer improvements
  • Maintain work area, machines, and control units in a clean, neat and orderly condition. Perform Total Productive Maintenance (TPM) activities such as minor maintenance that includes cleaning, inspection, minor lubrication and tightening loose bolts
  • Follow prescribed or standard safety regulations
  • 2 or more years CNC machining experience
  • Experience using machine shop math
  • Familiar with blueprints, schematics, and related drawings
  • Will need to use considerable judgment to plan and perform unusual and difficult work where only general methods are available and the making of broad decisions involving considerable initiative and ingenuity
39

CNC Technician Resume Examples & Samples

  • Minimum of five years of experience as a 5-axis CNC milling machine operator
  • Hands on work experience with Siemens 840D and Haas machine controls
  • Must possess an understanding of and ability to use standard G-code and M-code commands
  • Perform advanced setups of CNC fixtures and tooling
  • Follow instructions from engineers and programmers in set up and fabrication of CNC tooling fixtures
  • Participate in new CNC product development and entry into production programs
  • Set up CNC milling fixtures and align fixtures to CNC machine coordinate axes
  • Prepare cutting tools; mount in tool holders, record set length, and install
  • Prepare production parts and install on fixtures for CNC machining
  • Load and run CNC programs from within machine control file structure
  • Use measurement devices such as calipers, pin gages, micrometers, etc., to inspect finished machined parts
  • Inspect parts for defects, apply part protection, and stage for next higher assembly operations
  • Perform regularly scheduled machine maintenance operations and participate in CNC TPM program
  • Must be able to perform basic mathematical calculations, apply concepts such as percentages, ratios and proportion to practical situations
  • High school diploma or GED required. Completion of vocational level CNC machining and programming classes desired
  • Comply with all quality policies, specifications, regulations, and instructions
  • Rework/Trouble shooting/Problem solving (SPC)
  • Contribute ideas and experience, discuss job/task related concerns in a productive, professional manner
  • Follow through on requests and tasks assigned
  • Productively and positively work within a diverse team environment
  • Able to share points of view, and provide constructive feedback to and receive feedback from fellow team members
  • Attend plant wide scheduled training sessions
40

CNC Machinists Resume Examples & Samples

  • Perform operator and setup duties within the lathe department
  • Fully understand and troubleshoot setup issues,mitigate downtime and waste
  • Perform manual positioning,axis movements, install collect pads, jaws and tooling, set barloader
  • Understand offsetsand cutter compensations, single block function and z transfer
  • Use of inspection tools, independently complete quality inspection documentation (micrometers, gauges, visual inspection processes) and make necessary adjustments, understand gauging and visual inspection tooling, attention to detailed processes
  • Communicate issues to team leaders and/or supervisor
  • Strong understanding of GD&T is a plus
  • Inspection equipment experience, proven record of using inspection data
  • Print reading skills
  • Past experience operating CNC machines
  • Ability to lift 50 pounds
  • US Citizen or Green Card Holder
41

CNC Technician Resume Examples & Samples

  • Setting up, adjusting, and operating machine tools for various types of machine shop equipment including jig saw, band saw, miter saw, drill press, banding tool, drills, overhead crane and hoists, etc
  • Makes setups and adjustments holding tolerances to complex technical assembly layout drawing specifications
  • Performs adjustments and reworks as needed to meet functional design, quality and customer specifications
  • Checks and inspects machining operations against specified tolerances. May need to identify and adjust or revise minor design issues
  • Performs quality control inspections and checks after parts are cut and shaped
  • Prepares and maintains records of machined parts which are distributed to projects and/or shipped. Uses databases and spreadsheets to track machined parts, deficiencies, inventory, and quality processes
  • Examines machine parts and distributes materials to the projects and/or inventory
  • Performs the physical or administrative tasks involved in the shipping, receiving, storing and distributing of materials, parts, supplies and equipment
  • Ensures compliance with company safety/security programs and policies, government health and safety regulations including participation in employee training in emergency response, lift safety, industrial hygiene, and chemical and fire hazards, conducting safety surveys and recommending corrective action where occupational hazards exist, responding to emergencies and investigating accidents and recommends corrective action and maintaining safe and clean housekeeping practices within assigned work areas
  • High school diploma required plus a minimum of 2 plus years of experience in CNC machining which includes the cutting and shaping of metals to precision dimensions and using AutoCad for 2D drawings
  • Requires the ability to read and understand complex technical assembly layout drawings
  • Requires the ability to lift items up to 35 pounds, operate a forklift, overhead crane, and use hand and power tools
  • Legal Authorization to work in the U.S. is required. We will not sponsor individuals for employment visas for this job opening
  • IFS and SAP experience is preferred
  • 2 years technical school degree in Mechanical Engineering Technology, Electrical Engineering Technology or Manufacturing Technology
42

CNC Technician Resume Examples & Samples

  • Ability to run multiple machines (All programs)
  • Inspect parts for defects
  • Software (NC Expert)
  • Setups - Beginner to advanced ( Inserts, fixtures and tooling)
  • Forklift Certification
  • Tool Fabrication
  • CNC advanced Fluency
  • Use measurement devices when required (Calipers, Depth Gage, Micrometers etc.)
  • Maintenance/TPM
  • Product Introduction (New program process development)
  • Work with engineers as needed to support tool or process development
  • Ability to perform basic mathematical computations, Ability to apply concepts such as fractions, percentages, ratios and proportions and to practical situations
  • Specific vision abilities required by this include close vision. Distance vision, color vision, depth perception, and ability focus
  • Two years related experience and/or training or an equivalent combination of education and experience
  • Comply with all quality policies, specifications, regulations and instructions
  • Express and discuss job/task related concerns in a productive, professional manner
43

CNC Fab Operator Resume Examples & Samples

  • Follow routings and properly complete associated paperwork in accordance with set procedures
  • Setup and operate CNC machine tools to produce parts meeting blueprint specifications and tolerances
  • Perform first piece inspect of manufactured parts to meet blue-print specifications and tolerances, and adjust setups accordingly to ensure a quality product is produced
  • Train new operators in the setup and operation of CNC machine as required
  • Train to be proficient on various machines with moderate supervisor and or crew leader instruction
  • Responsible for communicating to Supervisor and or crew leader all machine related issues (i.e. machine down or damage to equipment) and or part availability
  • Perform to company standard 5’s program
  • Must have minimum of 1 year experience in the operation of CNC equipment within Dixie Chopper’s manufacturing facility
  • Experience in set up and operate CNC machine within Dixie Chopper’s manufacturing facility
  • Have knowledge in the set up and operation of CNC machining center and/or CNC laser operation or other CNC or press brake operations
  • Proficiency with measuring devises and work within blueprint specification tolerance
  • Must have experience with the use of measuring tools (i.e. calipers, protractors, height gages and micrometers)
  • Know the effects of material thickness as tooling is selected
  • Understand the effect that one dimension change has on another
  • Understanding of quality control processes and techniques
  • Edit programs
  • Properly install and remove tooling and fixture offsets
  • Ability to use and change out various tools (i.e. choice of end mills, boring bars, reamers, drills, etc.) (Mill specific)
  • Ability to change out grind wheels and dressers specific to grinders
44

CNC Mill Operator / Cell Resume Examples & Samples

  • Ability to read and interpret documents such as blueprints, manufacturing outlines, Material Safety Data sheets, safety rules, operating and maintenance instructions, and procedure manuals
  • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to apply general shop mat
  • The applicant must have the ability to utilize measuring equipment
45

CNC Technician Resume Examples & Samples

  • Determines specifications or procedures for tooling, requirements, set-up procedures, machine operation, work-piece dimensions or numerical control sequences using blueprints, instructions and machining knowledge
  • Set-up adjust and operate machine controls to position tools or regulate cutting depth, speed, feed or coolant flow to produce precision metal parts and materials as specified by work order, blueprints, drawing, templates or layout
  • Mounts, aligns and secures tooling, attachments and work-piece on machine chuck. Start and stop automatic operation of numerical control machine parts or test set-up, work-piece dimensions or programming. May adjust machine controls when automatic programming is faulty or if machine malfunctions
  • Troubleshoots and improves machining processes as required in order to meet quality and production requirements
  • Creates and maintains Work Instructions and Visual Aids
  • Trains operators on product knowledge, machining processes, gaging methods and equipment operation
  • Demonstrate ability to appear for work on time, follow directions from a supervisor, interact well with co-workers, understand and follow work rules and procedures, comply with corporate policies, goals and objectives, accept constructive feedback, establish goals, objectives, exhibit initiative and commitment
  • Participates in Cross Functional Teams for solving quality problems
  • Participates in Kaizen activities to ensure continuous improvement in processes
  • Supports TS16949 and ISO 14000 audits
46

CNC Maintenance Technician Resume Examples & Samples

  • Troubleshoot hydraulics, electronics, and software, electrical, pneumatic and mechanical systems. Use machine tool manuals, technical documents, internal and vendor resources to research machine issues
  • Equipment may include Haas, Mazak, Amada, Fanuc, Marvel, Hem etc
  • Communicate with the customer to determine machine problem
  • Identify and replace parts as necessary. Test and make adjustments
  • Communicate with the customer and follow-up with customer after the repair is complete
  • Comply with safety regulations and maintain a clean and orderly work area
  • Complete all required paperwork and/or data entry in a timely manner
  • Other miscellaneous duties and responsibilities as required by the position
  • Demonstrated high degree of industrial mechanical, pneumatic, hydraulic and electrical aptitude and repair abilities
  • Some practical experience in the machine tool industry is desirable; however we are willing to train the right person
  • Ability & desire to work independently
  • Valid driver’s license. Clean driving record
  • Ability to lift 40 lbs., stand, walk, bend/stoop on a regular basis
47

CNC Milling Engineer Resume Examples & Samples

  • Maintain efficiency of production thru machine and process improvement
  • Maintain quality objectives while controlling costs
  • Adhere to and maintain production schedules
  • Develop inspection methods
  • Troubleshoot, help operators to find solutions
  • Layout and develop programs for effective machining
  • Design and determine tooling needed for projects
  • Promote the implementation of verbal and/or written instructions such as blueprints, travelers, work instructions, process specifications, and sketches, in completing a variety of machining and inspection tasks
  • Exercise Good Machining Practices, programming code, tooling, setups, and inspection techniques
  • Train operators to utilize skills needed to maintain quality products
  • Setup and prove out programs before releasing to production
48

Process Engineer CNC Resume Examples & Samples

  • Degree qualified in a relevant Engineering / Science discipline, with 2+ years relevant experience
  • Experience in 5 axis CNC machining including Siemens Unigraphics NX CAM programming
  • Demonstrated ability to lead significant projects to completion, on time and within budget
  • Demonstrated leadership skills and the ability to make effective decisions
  • Demonstrated ability to understand technical issues and provide practical and cost-effective engineering solutions
  • Foundry experience ideally in Investment Casting
  • Experience with Cleanlines or Packaging
  • Experience in regulated industry, FDA, ISO, etc
  • Certification in Six Sigma or Statistical Engineering.Engineering (Generalist)
49

CNC Field Service Technician V nd Shift Resume Examples & Samples

  • Diagnoses, troubleshoots, maintains, and repairs process/production CNC machines and equipment as well as related mechanical equipment, such as pallets, fixtures, and spindles. Calibrates instrumentation, equipment, and controls for optimum performance
  • Experience troubleshooting Gantry/Robotic systems and controls (Fanuc, ABB, Liebherr, etc.)
  • Experience utilizing measurement tools such as micrometers, dial indicators, various type gauges, and calibers to set tolerances to OEM Specifications
50

Senior Analyst, CNC Programming Resume Examples & Samples

  • Siemens NX CAM (a.k.a Unigraphics) software, Ver. 8.0 or greater
  • Type II macro statements for on machine probing
  • Geometric Dimensioning and Tolerance (GD&T)
  • Exotic alloy material properties, cutting tools and machine tool capabilities to develop a part machining plan
  • Machine simulation software to troubleshoot/validate CNC programs and ensure 100% defect-free First Time Through (FTT) machining processes
  • Revision control requirements
  • Pertinent codes, rules, and regulations related to areas of assignments
  • Systems security procedures and industry standards
  • Protocols, standards, technologies, and applications
  • Safety rules and regulations
  • Interrogate engineering solid models, drawings and is familiar with Geometric Dimensioning and Tolerancing (GD&T)
  • Use Siemens NX CAD/CAM software Ver. 8 or greater to manipulate / modify solid models and to generate cutting tool paths (CNC programs) that are executed by CNC machining centers
  • Write work instructions that accompany the CNC programs
  • Provide technical support to machinists and process engineers during CNC machining operations
  • Demonstrate excellent organizational discipline, adhering to rigorous revision control requirements
  • Communicate effectively, both verbally, and in writing
  • Read and interpret blueprints, technical drawings, and specifications
  • Effectively review and analyze technical problems
  • Operate effectively in a team environment
  • Interpret company policies, technical publications, and government regulations
  • Prioritize and deal with conflicting workload requirements
  • Prepare complete and comprehensive reports
  • Understand and interpret regulations and their impact on the Company’s operations
  • Establish and maintain effective working relationships with those contacted in the course of work
  • Organize information clearly and precisely
  • Required to use a variety of computer systems
51

System Administratior As-cnc / JDE Specialist Resume Examples & Samples

  • Responsibilities include both performing typical CNC activities such as environment installation and upgrading, performance tuning, package building, security setup, and helping clients identify and solve their most critical information and technological challenges regarding EnterpriseOne environments
  • Using in-depth knowledge of the JDE product lines, as well as industry expertise, consults personnel to determine scope of project and support needs
  • Participates in preparation of proposals, budgets, development of process and procedures, work plans, and advises on implementation strategies in area of specialization
  • Identifies and applies creative and innovative approaches to resolving product implementation and Integration obstacles and problems
  • Develops new or enhanced methods and techniques to resolve problems and offers options, alternatives, outcomes and possible implications of various courses of action
  • Communicates product information and provides guidance to coworkers on issues, tools and techniques, enhancements, changes in processes and related in formation
  • Works collaboratively with coworkers, consultants, and managers to develop, test, and implement products
52

CNC Water Jet Operator Resume Examples & Samples

  • CNC programming knowledge
  • CNC operational knowledge/understanding
  • Proficient blueprint knowledge
  • Attention to Tolerances and interpretation
  • Understanding of tooling/set-up requirements
  • Ability to constantly improve machining knowledge
  • Ability to safely lift 50 lbs and work in multiple postions
  • AutoCAD knowledge / experience
  • Sheet metal experience
  • Water-jet operation
  • Press Brake knowledge
  • Machine shop experience
  • Plastics experience
  • Operate CNC machines, installing programs and editing
  • Set priority tasks, using provided schedules / reports
  • Perform inspection checks on processed parts
  • Verify, change, or correct process layouts for parts
  • Operate machinery daily in an advanced safety conscious manner
  • Perform diagnostic checks and maintenance of machinery
  • Correct usage of job tracking software "labor-trak"
  • High School or equivalent
  • Trade school or apprentice program
53

CNC Machinists Resume Examples & Samples

  • Setting up and operating CNC, N/C and automated edge contour machines that require high skill to set up and operate
  • Cleaning parts
  • Hand contouring edges to achieve tight tolerance dimensions using numerous hand tools, grinder and polishing equipment
  • Responsible for generating and checking part dimensions during various machining, inspection and edge contour stages with complex measuring devices such as micrometers, calipers, indicators, special purpose gages, scales, contour readers, visual standards and other measuring devices while maintaining quality to achieve very critical tolerances and surface finishes
  • Operate forklifts, cranes and material handling equipment. Employee may be required to lift or carry objects weighing up to 50 lbs. following proper ergonomic procedures
  • Must be willing to work in a team based environment (e.g. cooperates and relates well with others, practices direct professional communication, and is open to new ideas from others)
  • Must have the ability to work in normal conditions found in a machine shop including exposure to dirt, dust, noise, coolants and metal particles due to tooling required to machine and generate edges
  • Must be able to follow written and verbal instructions and communicate effectively in the English language
  • Must have at least 3 years manufacturing experience in set-up and operations of any 2 of the following computer numerically controlled (CNC) machining processes: drilling, milling, grinding, turning, or broaching or 2 year degree from an accredited machinist training program
  • Must have one year of experience reading and interpreting mechanical blueprints and/or production planning
  • Must have at least 2 years using precision measuring instruments
  • Must be able to push, pull or lift parts up to 50 lbs. utilizing proper ergonomic procedures
54

CNC Patternmaker Resume Examples & Samples

  • Machine and fabricate parts to specifications on blueprints provided, or as instructed
  • Fit change parts to machines and work with the test team running the machines
  • Operate CNC router and other related equipment necessary to complete assigned tasks
  • Document information regarding work performed on individual parts. Including checklists and computer entries
  • Perform all scheduled maintenance on equipment in your area as specified by the manufacturer of the equipment
  • Reorders parts needed through Parts Coordinator or Materials Manager when necessary. Check reorder points on parts to insure adequate inventory
  • Route parts to other departments in the factory as necessary
  • Ensures and maintains safety and cleanliness of work area by performing housekeeping duties daily
  • Provides verbal/written feedback to appropriate member regarding engineering, manufacturing and/or routing problems with parts and/or equipment
  • Experience in a manufacturing setting preferred
  • Must be licensed to operate a forklift
  • On the job training provided
  • Must have good manual dexterity and the ability to communicate with coworkers
  • Valid Passport-preferred
  • Must have some Mastercam experience
55

CNC / EDM Operator Resume Examples & Samples

  • Set-up, program and operate CNC mills, lathes, grinders EDM’s
  • Read and interpret blueprints, routers and work instructions
  • Insert job responsibility
  • High School or GED, or Four to Six years of related experience
  • Knowledge of MS Word, Excel, ESPRIT Software, WorkNC, Axxon Software
  • Ability to operate, hi-lo, overhead crane, aerial lift, power tools
  • Ability to calculate figures, amounts (discounts, interest, commissions, proportions) Basic Algebra & Geometry
56

Experienced CNC Operators & CNC Trainees Resume Examples & Samples

  • Maintain inventory by verifying receipt of stock and performing necessary completion transactions in ERP system
  • CNC Machining
  • Calipers and micrometers
  • Lathe
  • NTY3
57

CNC Maintenance Technician Resume Examples & Samples

  • Maintain, troubleshoot, adjust, modify, repair and service facility fixtures, systems, machine tools, CNC controls, instruments, motors and other electrical/electronic, hydraulic and pneumatic equipment
  • Communicating accurately, concisely, and professionally with contractors, vendors and internal/external customers
  • Using our Computerized Maintenance Management System (CMMS), you receive work orders, identify faulty equipment, and acquire parts and equipment to complete repairs
  • Perform other work related tasks as assigned
  • Train other maintenance associates regarding CNC equipment repair and all maintenance-related activities
  • Perform preventive maintenance as well as troubleshoot and repair all machine tools and equipment (manual and CNC)
  • Minimum of 5 years of industrial maintenance experience required
58

CNC Laser Operator Resume Examples & Samples

  • Properly complete daily labor reports, material move tickets and scrap tickets
  • Perform to an established methods and standards; meeting or exceeding the departments quality and productivity goals
  • Communicate well with others and work in a manner to support a team environment
  • Overtime may be frequent in this position
  • Perform other duties within the scope of job assignment as assigned by the Supervisor and or crew leader
  • Perform duties in compliance with all safety rules and regulations required by the Company, Local, and State and Federal provisions
  • Must possess mechanical knowledge of CNC machine tool operation, set up & maintenance
  • The employee must be able to perform basic mathematics and have good understanding of fractions and numbers to three decimal places. Read and understand blue-prints, have the ability to follows charts and tables
  • Must be able to lift up to 40lb. and more with assistance
59

CNC Technician Resume Examples & Samples

  • Proactively performing repairs on our critical equipment, performing preventive and predictive maintenance. Completing all operations repair requirements. Corrective maintenance completed on time and within budget
  • Communicating with understanding, using good judgment, sense of urgency, accurately, concisely, and professionally with our customers and operations team. Show care and feedback on important repair needs. Coordinate the necessary requirements to getting work completed, request parts to be ordered, and be confident within reasoning of time estimate until work completion
  • Keeping up to date on new electrical, mechanical, pneumatics and hydraulics industry knowledge, positioning the plant directives for success and future advancement
  • Must be capable of using a variety of work tools and equipment such as micrometers, dial indicators, multi-meters, schematic, drawings, oscilloscope, Amp meter,drill motors, saws, pipe cutter, press, grease gun, welding machine, Cutting torch, bar feeder alignment tools, etc
  • Maintains shop in clean 6S standards daily
  • Ability to learn the functions and operations of all machine shop equipment. Provide support for all mechanical and electrical equipment
  • Interact and share knowledge base daily with Engineers, Supervisors, Managers, Machine Operators/Tooling, and Maintenance Team, while ensuring to keep higher-level management personnel informed of all mission-critical requirements. Show progress and / or receive directives as needed
  • Minimum of 2 years of industrial maintenance experience required
  • Experience with advanced PLC, and/or robotics, and CNC repair required
  • Understands electrical theory, mechanical theory, fluid power and control systems
  • Ability to analyze, troubleshoot and perform repairs
  • Demonstrated ability to perform electronic, mechanical and hydraulic repairs used in electrical and mechanical maintenance technician work assignments
  • Basic Microsoft Office knowledge and/or Computerized Maintenance Management System (CMMS) knowledge desired
60

CNC Mill Lead Resume Examples & Samples

  • Perform advanced set ups on multi axis CNC mills including toolset and troubleshooting
  • Program intricate parts including 3D programming using Mastercam and Esprit
  • Comprehensive understanding of Fanuc macros
  • Reads, comprehends, and understands blueprints, sketches, and verbal and written instructions
  • Uses standard shop measuring tools such as calipers, micrometers, optical comparators and vision systems
  • Maintains equipment including machines and measuring tools
  • Keeps work area safe and clean
  • Continually demonstrates the ability to setup and run close tolerance machined parts of various materials using mill machines in a fast paced environment
  • Trains and mentors individuals in the assigned work center on requirements for the production of Medical Components
  • Control and manage the workflow in the applicable areas
  • Prioritize work within the department
  • Responsible for the efficient planning of machines, equipment and/or personnel in the department
  • Assures the quality level of processing and the adherence to procedures
  • Responsible for the training and the identification of training needs for the department
  • Instructs, trains and assist operators with machine operation, techniques and quality and productivity as required
  • Performs record keeping, data entry, housekeeping, and implement safety regulations
  • Responsible for achieving the goals and objectives established for the department in quality, efficiency and utilization
61

CNC Producton Machining Leader Resume Examples & Samples

  • Leads CNC Production Machining Segment and employees
  • Ensure timely and efficient production
  • Manages cost structure within the Segment
  • Improve production rates, quality and costs
  • Communicates effectively with subordinates, peers and customers
  • Bachelor's degree in Engineering required
  • Minimum of 2 -4 years of machining manufacturing experience including leadership
  • Strong analytical skills-able to identify trends and opportunities for improvement
62

CNC Prog & Tool Resume Examples & Samples

  • Developing, analyzing and managing Manufacturing/ Assembly Projects
  • Assisting in developing department capital and expense budgets
  • Maintaining the department capital forecast
  • Administering the assembly New Product Introduction (NPI) process to ensure that Engineering drawings are released and processed on time for NPI build
  • Training new processors and developing training programs for Processors and Assemblers
  • Engaging in creative problem solving to address operational issues including: ergonomic/ safety, efficiency improvements, process bottlenecks, quality concerns
  • Working with internal and external suppliers to develop and manage projects to ensure efficient and cost effective systems and processes to produce quality products
  • Providing the application, procurement, processing, installation and capability of new heat treat, welding, and / or chemical processes and equipment
  • Designing, developing and implementing the integration of manufacturing systems including factory control software, scheduling techniques, simulation and systems application
  • Coordinating, planning, monitoring and reporting the activities associated with the flow analysis, design, financial modeling and implementation of complex manufacturing group technology cells in an assigned area
  • Providing manufacturing technical support in process control and internal certification
  • Coordinating the corporate manufacturing and office space utilization and assisting in preparation of
  • University or technical degree in a manufacturing engineering-related discipline (or equivalent)
  • 2 years of work-related experience
  • Thorough knowledge of manufacturing concepts
  • English Fluid
  • Familiar with company policies and procedures with a strong department background
  • Able to build strong relationships with various stakeholders
63

Cnc-mechaniker Im-schichtbetrieb Resume Examples & Samples

  • Einrichten von modernen CNC-Maschinen sowie Erstellen von Programmen
  • Sie nehmen Programmkorrekturen vor und produzieren qualitativ hochstehende Produkte
  • Sie übernehmen für die von Ihnen hergestellten Produkte die Qualitätsverantwortung und setzen dabei als Selbstprüfer via SPC viel-fältige Messmittel ein
  • Sie sind involviert bei der Inbetriebnahme und Validierung von neuen und bestehenden Maschinen und bringen Ihr Know-how in verschiedensten interdisziplinären Projekten ein
  • Ihre aktive Rolle bei der kontinuierlichen Optimierung unserer Prozesse rundet ihr spannendes Aufgabengebiet ab
64

Manager, CNC Programming Resume Examples & Samples

  • Develops and executes global strategy for standardization and optimization of our CAM software, programming practices and tooling packages. Strives for harmonization and sharing of global best practices across global teams in a matrixed leadership environment
  • Responsible for oversight of the Programmers for the programming of Mill/turns, Lathes, Mills and other equipment as required
  • Will need to able to create CNC programs to manufacture parts based on engineering blueprints
  • Understand equipment capabilities and available tooling to develop programs that maximize part accuracy, material utilization and machine productivity
  • Work in conjunction with Manufacturing and Design Engineers to recommend product modifications that will result in cost savings due to reduction in material content and /or fabrication time
  • Performs the duties of this position effectively in a fast-paced business environment with on-going project deadlines
  • Develop and Prepare Operational Metrics to Management, i.e. Quality / Cost / On Time Performance
  • Work with Equipment Manufacturers to Optimize Operational Equipment Effectiveness (OEE)
  • Train existing and new employees
  • Skilled in team processes, ability to work with others to identify and solve problems, resolve conflicts and optimize opportunities
  • Bachelors or Associate Degree in technical discipline such as Manufacturing Technology or Computer Programming preferred or equivalent on the job experience
  • 3-5 years of experience in a Supervisory Role
  • 3-5 years of experience programming CNC Milling and Turning machines. Preferably programming experience utilizing 3D part models / solid models and 5-axis machine tools
  • Experience with Esprit CAM Software and Crash Guard Software
  • Experience operating WFL and Weingartner Equipment
  • Experience with Injection/Extrusion Barrels and/or Screws
  • Experience with Zoller Presetters
  • Must have a thorough knowledge of CAM to create tooling, geometry and tool paths to manufacture parts for available machine tools
  • Ability to read and understand blueprints and engineering specifications
  • Capable of using measuring devices
65

CNC Maintenance Technician Resume Examples & Samples

  • One to Three years plus of hands on experience of troubleshooting heavy-duty industrial CNC machinery and controls
  • Experience with word processing (Word), spreadsheets (Excel) and able to execute required computer transactions
  • Four year apprenticeship program of Master Mechanics, preferred
  • Associates degree in electronics from an accredited institution or equivalent, preferred
  • Knowledge of Fanuc Controls preferred
66

CNC Setter / Operator Resume Examples & Samples

  • Setting / Operating CNC machines (Milling or Turning) within the standard set and run times
  • Monitor and be responsible for the quality of components using a wide range of equipment including CMM inspection. This will include manually recording quality specific information
  • Interpret drawings and contribute to the programming of component parts where applicable
  • Although not essential, expertise in the generation of CNC programmes, including the use of GIBBS CAM programming software would be advantageous
67

CNC Plasma Operator Resume Examples & Samples

  • Operation of the plasma machines
  • Handling of burr and polishing tools
  • Handling of cranes and hoists
  • Handling of as400 system
  • Filling general forms in area as 5’s, quality control, etc
  • Knowledge in measuring equipment as Vernier and micrometer
  • Experience in cutting manual machines
  • Acquainted with steel materials as aluminum, carbon and stainless steal
68

CNC Machining Group Leader, EDM Resume Examples & Samples

  • Assists with administrative tasks as directed and provides feedback to department supervision on performance of subordinates and machine performance
  • Inspects, verifies, and prepares for loading all the new bar stock material
  • Maintains good housekeeping practices in all assigned work areas
  • Monitors machine performance regarding quantity output and quality of parts produced using standard inspection instruments (micrometers, calipers, etc.)
  • Requests maintenance assistance and notifies department supervision
  • Ability to lead and direct people through example, training and delegation
  • Ability to communicate clearly, both orally and in writing, with subordinates and management in a professional manner
  • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form
  • Regularly helps supervision select machines/processes needed to produce scheduled parts
  • Familiarity with raw materials, cutting tool geometry, and related feeds and speeds
  • Basic computer skills are required
69

CNC Machining Group Leader Resume Examples & Samples

  • Coordinates the assignments of operators/set-up machinists to ensure efficient production and assists supervision in the planning of manufacturing processes and improvements
  • Coordinates with programming and supervision on programming issues and improvements
  • Enters data on log sheets regarding shop orders worked on, quantity produced, hours worked, etc
  • Ability to work with mathematical concepts, including basic trigonometry
  • Must have knowledge of CNC machine tools and functions, CNC controller functions, NC programming and editing, and precision inspection equipment and methods (micrometers, calipers, optical comparators, etc.)
  • Ability to prioritize personal workload to maintain company efficiencies
70

CNC Machining Group Leader, Swiss Resume Examples & Samples

  • Responsible to generate the parts CNC programs using a specify computer software
  • Responsible for being aware of status of all machines for which they have been assigned
  • Performs routine operations of assigned machine(s), including but not limited to start-up/shutdown of equipment
  • Tags non-conforming bar stock material and returns to proper location
  • Troubleshoots methods/tooling problems and corrects process problems as necessary to maintain production
  • Sets and sharpens custom and standard cutting tools
  • Performs on-line inspections to insure conformance to specification
  • Ability to read and interpret documents, in English, such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to communicate effectively, in English, regarding process/machine problems, etc
  • High School Diploma or GED, college level machining classes and/or formal CNC training plus a minimum of 5 years related machining experience and/or training
  • Some supervisory experience or training preferred
71

CNC Mill Operator Resume Examples & Samples

  • Operate hand tools as needed in a safe and efficient manner
  • May need to operate overhead crane, forklift, and/or hand trucks as necessary
  • Be able to properly utilize measuring tools such as a tape measure, micrometer, vernier or caliper
  • 8 - 10 years’ experience running vertical and horizontal CNC mills
  • Experienced in cutting a variety of metals and welds preferred
  • Ability to read and edit CNC programs required
  • Ability and experience in using G and M Code required
  • Experienced in 4 Jaw chuck setup preferred
  • Familiarity with tool grinding
  • Lifting requirements: Up to 50 lbs
  • Standing/sitting requirements: standing up to 100% of the workday
72

Process Engineer, Lean / CNC / Automation Resume Examples & Samples

  • Work in a team environment to identify and solve problems, document root cause and corrective actions, submit reports and results to management, submit presentations and recommendations on how to reduce scrap and improve process stability
  • Responsible for measuring, documenting and improving current manufacturing process capabilities
  • Establishing new or upgrading current manufacturing process capabilities
  • Perform process audits on a daily basis to ensure processes are being followed and documentation is up-to-date
  • Continuous improvement; use data driven approach to implement improvements in the manufacturing areas for process stabilization, repeatability, control, efficiencies of labor, and time and cost reduction in scrap and rework. Implement new tooling, jigs, and fixture designs into the manufacturing process to eliminate waste, reduce scrap, and improve efficiency
  • Generate process flow, support manufacturing operators with tools and equipment, and all necessary documents
  • Manage all technical documents, BOO/BOM, process specifications, Control of production process change, and repair procedures
  • Participate in MRB; daily review of product non-conformities and disposition accordingly
  • Support internal activities associated with successful launch of new products. Perform other duties/projects as assigned
  • Meet and support division goals and objectives for all internal and external customers. Provide group input for cost estimates and proposal data in support of TSR’s
  • Drive and lead changes utilizing project management approach and techniques
  • Accustomed with all type of technical documents, process specifications, quality ATP’s, standard work, P-FEMA, control charts etc
  • Understanding of Lean Manufacturing, Six Sigma, MRP, DOE, FMEA, Fishbone, 5Y’s, Problem solving, & value stream mapping
  • Familiar with P-PAP process
  • Prefer a solid understanding of GD&T and understanding manufacturing drawings
  • Knowledge of CNC, Automation, and Robotics
  • Experience with performance coatings, composite material, and highly cosmetic products are a plus
73

CNC Field Service Technician Resume Examples & Samples

  • Ability to work in an aerial lift or scissor lift at heights up to 30 feet or higher
  • Special Requirements
  • Wear steel toe safety shoes, safety glasses, gloves, hard hats and other Personal Protective Equipment as needed
  • Cope with demands (stressors) that are associated with the job and/or the work environment so that acceptable levels of performance and overall contribution are maintained
  • Requires the use of a Company/Client approved utility knife
  • Requires the ability to differentiate colors pertaining to wire color-coding
  • Some tasks will require repetitive wrist movement
  • Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress
  • Requires the ability to regularly lift up to 50 lbs
  • Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift
  • Requires the flexibility to bend/stoop, squat repetitive during shift
  • Requires the ability to regularly kneel repetitive for shift
  • Requires the ability to move in a 90-degree fashion on a repetitive basis for shift
  • Requires the ability to stretch/reach on a repetitive basis for shift
  • Requires the ability to walk extensively throughout the plant during shift
  • This position may require a valid Driver’s License
  • This position will require the ability to obtain a security access badge at our client’s location
  • This position may require various shifts, weekends, and alternative work schedules
  • Other Attributes
74

CNC Machinists Technician Resume Examples & Samples

  • Has the ability to use machine control(s) effectively though may require help on occasion.“Effectively” is defined as having understanding of all functions of the machine control including axis movement, program management, tool data management, offset management, etc.Understands function of all control panel features.A Level II operator has this ability on 2 or more of the following controls:Acramatic 850, 950, 2100; Siemens, Fanuc, Mazak, and ‘open architecture’ controls
  • Demonstrates ability to perform simple MDI commands.Can input data to move machine to coordinates, turn spindle on and off, coolant on and off, and put machine into neutral or ‘low gear’ for hole indication purposes.Can write simple programs using ‘canned’ cycles to do things like repair stripped out bolt holes in fixtures
  • Has basic to moderate level of blueprint understanding.Can find datums, understands control features and tolerances, understands how sectional views work, can find blueprint zone information, and part dimensional features.Can use this information to complete Operator Inspection Reports
  • Can set up a job.This means loading fixtures, indicating them in along 3 axis, set coordinates off a set-up hole using a dial indicator.Knows how to use a ‘wiggler’ or surface sensing probe or edge finder.Can set up all tools to correct length and input Tool Data.Understands cutter diameter or radius compensation.Must be able to do this with minimal to no supervision.Identifies damaged Tooling and notifies Supervisor
  • Has basic understanding of cutter geometry, knows what is meant by ‘primary’ and ‘secondary’ relief angles.Can identify type of tool (end mill, drill, inserted tool, reamer, etc).Knows the difference between carbide, cobalt, and High Speed Steel and the proper application of each.Can identify left hand versus right hand tools and understands required spindle direction for each use
  • Understands how to load raw material onto a fixture and how to make sure it is loaded properly by using feeler gauges, indicators, etc
  • Follows all Shop Practices.Uses all available information and procedures to strive for zero-defects on all parts
  • Two (2) or more years’ experience in machining
  • Understands surface speed, cutter rpm, and chip load completely and can demonstrate this knowledge by using a ‘slide rule’ calculator or formula calculation
  • Possesses all tools on Required Tool List and knows how to use them properly.Can demonstrate what tool to use to check various tolerance levels and the reasoning for this
  • Can calculate and use decimals written out to four places
75

CNC Field Service Technician V st Shift Resume Examples & Samples

  • Must have the ability to work in an aerial lift or scissor lift at heights up to 30 feet or higher
  • Associates Degree in Industrial Technology, Industrial Electrical, or related program
  • Experience troubleshooting Allen Bradley, Siemens 7, Mitsubishi, Siemens 840d and Fanuc controllers
76

CNC Controls Engineer Resume Examples & Samples

  • The primary role of the CNC Applications Engineer is supporting machine builders to adapt Siemens platforms onto their machine concepts
  • Serves as the product expert for CNC machine tool topics within the USA
  • The technology is Sinumerik CNC, Simatic PLC, Sinamics drives, Simotics motors, and shop floor information systems
  • The job roles include consultation, solutions development, solutions test and confirmation, solutions implementation, test and follow-up down to the final user if necessary
  • Effectively communicate, organize, and facilitate the needs of the customers while collaborating with internal team members including Account Managers, Business Development, Product Management and Field Service
  • The applications engineer must be diplomatic and courteous in his interfacing with a wide range of OEM and final user personnel
  • Applications engineering at the OEM level is a job for an intensely technical person who can take on the broader business tasks as well
77

CNC Mill Operator Resume Examples & Samples

  • Requires thorough knowledge of machine controls and operation. Need not be able to program, but
  • Requires ability to work on Special Product Orders (SPO's) that use existing components or processes,
  • Adheres to all safety rules and report questionable conditions to department supervisor
  • Apply and recommend Lean practices
78

CNC Service Tech Resume Examples & Samples

  • Machining processes
  • Programming using and G & M codes
  • Knowledge to teach robot and gantry pickup points
79

CNC Machinists Resume Examples & Samples

  • Plans machining by studying work orders, blueprints, engineering plans, materials, specifications, orthographic drawings, reference planes, locations of surfaces, and machine parameters; interpreting geometric dimensions and tolerances (GD&T)
  • Plans stock inventory by checking stock to determine amount available; anticipating needed stock; placing and expediting orders for stock; verifying receipt of stock
  • Programs mills and lathes by entering instructions, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part programs
  • Verifies settings by measuring positions, first-run part, and sample work pieces; adhering to international standards
  • Maintains specifications by observing drilling, grooving and cutting, including turning, facing, knurling and thread chasing operations; taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes
  • Maintains equipment by completing preventive maintenance requirements; following manufacturer’s instructions; troubleshooting malfunctions; calling for repairs
  • Must be able to pass pre-employment machine testing given by testing provider
  • Employee may travel to factory location in Louisiana for additional training upon hire
  • Two year degree or technical certificate from an accredited institution and 2 years’ experience as CNC Operator OR
  • HS Diploma/ GED and 5+ years’ work experience as CNC operator
  • Must be able to regularly pick up and manipulate up to 35 pounds safely
  • Experience with CNC horizontal machining centers and turning centers with Mazatrol Matrix and Mazak Matrix Smooth technology control systems
  • Computer application knowledge (MS Word, Excel, Outlook)
  • Must be able to read and comprehend safety procedures, work instructions and drawings
  • Must have the ability to operate a computer and learn specialized programs as needed to perform job functions
  • Must be able to stand and/or walk on hard surfaces for up to 10 hours per day
80

Senior CNC Engineer Resume Examples & Samples

  • Design the Screen printer block, wave soldering pallet, assemble jig & fixture
  • CNC & Carves-milling & Drilling machine programming
  • CNC & Carves-milling & Drilling machine maintenance/repair
  • Management fabrication material and machine spare parts
  • Manage internal/external team to achieve the target or assigned task
81

CNC Mill Resume Examples & Samples

  • Set up and operate CNC mill equipment
  • Choose correct tools to achieve desired product finish, based on material and other specifications
  • Read and understand drawings, and be able to hold tolerances to .001”
  • Skills and Abilities
  • Ability to calculate using fractions and decimals as well as identify radii required
  • Ability to read, understand and interpret blueprints, schematics, etc. required
  • Ability to properly use micrometers, verniers and calipers and tape measures to determine tolerances required
  • Familiarity with cutting tools; their applications and uses; and other tools associated with lathing equipment and machine work
  • Familiarity with required hand tools; their applications and uses; and safe handling requirements
  • Push/Pull requirements: up to 25% of the workday
  • Bending/squatting requirements: up to 25% of the workday
  • Use of steps/ladders: no ladder usage; stepping (stairs and/or platform): periodic up to 20% of the workday
  • Climbing/reaching: up to 20% of the workday, depending on number of set-ups and needed machine adjustments
82

CNC set up Resume Examples & Samples

  • Read blueprints, engineering plans, materials, specifications, orthographic drawings, reference planes, locations of surfaces, and machining parameters; interpreting geometric dimensions and tolerances (GD&T)
  • Sets-up mills and lathes by installing and adjusting three- and four-jaw chucks, tools, attachments, collets, bushings, cams, gears, stops, and stock pushers; indicating vices; tramming heads
  • Verifies settings by measuring positions, first-run part, and sample workpieces; adhering to international standards
  • Maintains specifications by observing drilling, grooving, and cutting, including turning, facing, knurling and thread chasing operations; taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes
  • Maintains continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs
  • Ability to programmer CNC machines
  • Safety for self and others is a priority to the individual
  • General math skills with the ability to understand measuring/measurement concepts and their applications
  • Be familiar with basic tools of measuring and when to use for inspection of parts
  • Must be organized, detail oriented
  • Ability to read and use micrometer and calipers
  • Standing for long periods of time and lifting up to 50lbs
  • 3 or more years programming, setting up, running, and troubleshooting CNC machines
  • Experience in an industrial and/or manufacturing type environment
83

CNC Coordinator Resume Examples & Samples

  • Perform inventory on all manufacturing lines and ensure adherence to production schedule. Done by reviewing each machine and ensuring that the correct job is running or lined up
  • Implements the proper procedures to optimize processes, reduce cost, and increase productivity while maintaining quality conformance to customer requirements and/or industry specifications; participates in continual process improvement and cost reduction projects
  • Review CNC programs to optimize cycle times
  • Coach employees in regards to set up optimization through reduction on non- cutting operations
  • Lean Manufacturing principles to gather data and develop improvement plans. Utilization of OEE boards to drive performance
  • 5+ years of CNC Lathe Programming experience and CNC Lathe Set-Up
  • Fanuc controller experience
  • Experience with Miyano, Tsugami, or Eubama machines
  • Associates degree or trade school certification
  • Microsoft excel skills
  • Experience working titanium and Inconel
  • Bilingual in English/Spanish
  • Supervisory experience
  • Entry level six sigma belt
  • Aerospace Experience
84

CNC Waterjet Oper-axis rd Shift Resume Examples & Samples

  • High School diploma or equivalent, or equivalent combination of education and experience
  • Math Skills – decimals, percentages, fractions, geometry and basic understanding of Polar and Cartesian Coordinate Systems preferred
  • Ability to read and interpret blueprints
  • Ability to operate overhead crane and/or hoist
  • Trained and certified to operate forklift – annual certification
  • Reads and understands internal procedures and policies
  • Understands and follows through on both verbal and written instructions
  • Team oriented with a continuous improvement outlook
  • Frequently required to walk; use hands to handle or feel objects, tools, or controls; and reach with hands and arms
  • Annual baseline hearing test is required
  • Regularly required to work near moving mechanical parts
  • Fully enclosed shoes of solid, leather construction with a steel or composite toe cap (ANSI Z41 compliant) must be worn in all manufacturing areas
85

CNC Waterjet Operator Resume Examples & Samples

  • Frequently required to walk; use hands to finger, handle, or feel objects, tools, or controls; and reach with hands and arms
  • Must be able to frequently lift and/or move up to 50 pounds
  • Working conditions are: 100% manufacturing environment
  • Regularly exposed to wet and/or humid conditions and airborne particles
  • Safety glasses (ANSI Z87 compliant) required in all manufacturing areas
  • Safety Footwear shall be in accordance with the following: ASTM standard F2413-05 with minimum impact resistance, compression resistance and metatarsal designation ratings of 75 foot pounds (i.e. ASTM F2413-05 I/75 C/75 Mt/75), which are viewable on the inside tag of footwear
  • Strong mechanical aptitude desired
  • Ability to use measuring instruments including but not limited to calipers, indicators, and scales
  • Ability to operate a forklift
  • High school diploma;up to 3 years related experience in job function and/or training; equivalent combination of education and experience
  • One year CNC operator experience is preferred
  • Math Skills – decimals, percentages, fractions - geometry and trigonometry is a plus
  • Ability to read and interpret blueprints and mylars
  • 3333 Main Street
86

CNC Setup Operator Resume Examples & Samples

  • Setup machines, lathes, mills, or machining centers for the production of products
  • Participate in ongoing process improvements
  • Record production through DPI terminal and maintain count cards
  • May perform additional cell responsibilities as necessary
  • Must have a working knowledge of precision measuring equipment including mics, calipers, comparators, and indicators
  • Must be able to lift in the 60-pound range repeatedly
  • Must be able to work in a team/cellular environment
  • Must demonstrate ability to perform setup on machines
  • High School diploma plus two years machining experience on CNC lathes and/or mills or have four semesters or verified vocational or high school machine shop training with one year of CNC experience
87

Cnc Engineer Resume Examples & Samples

  • Design, develop or modify tools and fixtures to improve the manufacturability of parts and processes
  • Creates CNC programs for machines
  • Work with the Process Planning and Applications Engineering in the “Design for Manufacture” process to reduce costs and increase throughput
  • Work directly with Engineering to initiate and participate in “Design for Manufacturing” reviews to improve designs and reduce overall costs
  • Assist in developing and implementing design and manufacturing standards
  • Provide technical support as required
  • Completes special projects as required
88

CNC Pattern Torch Operator Resume Examples & Samples

  • Order and load materials onto cutting tables
  • Monitor machine operation and material availability
  • Follow special handling, documentation and traceability procedures for materials with Lot Tracking designations
  • After cutting, ensure all material changes and markings are correctly made
  • Coordinate with Quality Assurance on material substitutions if necessary
  • Perform preventive maintenance on specified tools, machinery and equipment
  • Follow directions and perform tasks as assigned by Lead and Supervisors
  • Follow the 5S system
  • At least 3-years’ experience in metal forming, shearing, cutting, burning or fabricating, preferred
  • Ability to read and interpret documents such as work instructions, safety rules, operating and maintenance instructions, and procedure manuals
  • Ability to read a standard tape measure
  • Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form
  • Related experience and/or training or equivalent combination of education and experience
89

Semi-skilled CNC Setter FTC Ramtic Kitter Resume Examples & Samples

  • Manual kitting of RAMTIC Carousels whilst adhering to the Quality Standard, within the set time
  • Maintain the high standards of housekeeping in the working area
  • A comprehensive knowledge of the RAMTIC kitting process would be desirable
90

CNC Set-up Operator Resume Examples & Samples

  • Setup of machines through use of proper tools, and the most efficient technique. Align vises, fixtures with indicator to be parallel or square to a reference surface. Indicate position of the fixture and parts. Set axis to correct position by using the right numeric code. Load and unload the program
  • Participate in the update and maintenance of set up sheets for all parts through the work center
  • Operate machine with proper guarding in place, report any damaged guarding, tool holders, tools etc. Ensure guards are replaced after set up. Monitor oil levels of machine; keep machine and tools in condition
  • Check the first part and make sure that all the dimensions are within tolerance
  • Change and modify programs where applicable
  • Change tool length and diameter offsets, fixture and pallet offsets
  • Modify and grind cutting tools as required, and use proper feed and speed for maximum efficiency
  • Keep production running, deburr and prep parts for loading, or clean parts to reload
  • Check parts, deburr, tapping, counter boring and cleaning up tools holders from the previous setup
  • Prepare tools and fixtures for the next job, get new tools, use regrind tools as
  • Follow Health and Safety Policies and practice safe work habits, industrial hygiene and good housekeeping around benches and machines
  • Identify opportunities for improvement via new tooling, set up reduction concepts
  • Basic computer skills are and asset, Funuc or Mazak control knowledge is a must
  • Ability to use all the available measuring tools such as micrometer, dial gauges, deep
  • Minimum 3 years’ experience running CNC machines
  • Aerospace experience preferred
91

CNC Leadman Resume Examples & Samples

  • Acts as a liaison between supervisor, maintenance, production control and machinists with daily responsibilities
  • Assigns jobs and machines to operators, monitors technique, quality and quantity of production, troubleshoots and assists operators with machining problems
  • Ensures that all CNC machinery have the ability to insure production capacity is met
  • Assigns and schedules work to operators and machinists
  • Assists supervisor in monitoring tooling, material, quality and production
  • Troubleshoots machining problems and determines action to be taken
  • Proficiency with performing and coaching operators in machine set ups and interpretation of instructions/blueprints/specifications, monitoring tooling, materials, quality concerns and production
  • Selects and obtains proper materials and tooling for the job
  • Checks tooling and reworks as needed to manufacture part to print specification
  • Ensures machinist correctly demonstrates and understands the verification of following the dimensions of parts while running the job using measuring instruments such as micrometers, comparators, calipers, and gauges, inspects completed parts to ensure they meet blueprints/specifications
  • Recognizes improper machine functioning and makes necessary adjustments to spindle chains, clutches and cross slides as needed. Perform minor repairs, and determines correction action to be taken to management &/or maintenance for improved quality and tooling life
  • Relies on instructions and pre-established guidelines to perform the functions of the job
  • Demonstrated technical knowledge and experience in reading and interpreting blueprints, job order for product specifications such as dimensions/ tolerances and use shop and measuring tools
  • Represents Factory/Department manufacturing on cross-functional teams, safety community or in-house committees
  • Provide daily direction, training and assessment for peer assigned to for development. Documents required assessment that includes a summary of the curricular, skill level achieved, further development recommendation and / or competencies not achieved during the development period
  • Assist supervisor in the development of lesser skilled operators to improve production efficiencies
  • Reports any safety violation, machining equipment misusage and/or improperly performed work to supervisor, may provide input for action including discipline and firing
  • Proceeds with completion of job, observing machine frequently to verify correct operation and ensure that the hopper is properly loaded
  • Demonstrated ability to perform Statistical Process Control (SPC) checks per specification, Master cam (CAM software) and acts in accordance with output and demonstrates knowledge and use of Shop Floor Systems
  • Verifies proper placement or replacement of all safety guards, safety materials, use of PPE’s by employees and adheres to all safety procedures
  • Adheres to all company Health, Safety, and Environmental policies, practices, and procedures
  • Responsible for complying with the rules and regulations set forth by Federal, Local, and State government, LISI Aerospace, and HSE Procedures
  • Responsibility for complying with ISO 14001standards, aspects, directives and impact as related to the HSE policy commitments
  • Responsible for attending all training provided and for adhering to all HSE procedures, policies, and plans, conforming to reporting requirements and safe operating procedures at all times
  • Required to identify and alert any known or suspected nonconformance for all company procedures or legal requirements to management’s attention immediately
  • Continually seek opportunities to improve our HSE performance by establishing objectives and targets, measuring progress, and reporting our results
  • Implements and suggests waste elimination initiatives specifically related to the function and department such as EMS and recycling opportunities to elimination of production waste
  • Works under limited supervision with a wide degree of creativity and latitude is required
  • Performs a variety of other tasks and duties
  • Minimum 1-2 year certificate from college or technical school, preferred
  • Prefer combination of Journey-level & lead experience in fastener manufacturing environment
  • Advance knowledge of all types of automatic machinery and procedures
  • Advance technical knowledge with quality and SPC
  • A minimum of over 5 year’s equivalent combination of technical education and experience
92

CNC Resume Examples & Samples

  • Router sign-off procedures
  • Identify Materials and AMS specifications
  • Maintain cell charts
  • Load program from DNC to machines
  • Must be capable of making offset adjustments and performing minor program edits
  • Ability to safely and accurately setup and use a wide variety of hand tools and gages
  • Work in accordance with general safety rules and practices
  • High School Diploma or equivalent from an accredited institution
  • One year manufacturing / operations experience
  • Operate machines, and any other calibration equipment such as calipers, Allen wrench, and air gun or any other equipment necessary to perform job functions
  • Basic mathematical skills required
  • Job requires lifting a minimum of 25lbs or up to 50lbs on a daily basis, as well as standing on feet up to 8-10 hours per day. Constant use of hands is essential
93

CNC Cell Operator Resume Examples & Samples

  • Requires one to three years of trades training or equivalent experience and one to three years of related machining experience
  • Ability to read and comprehend detailed and complex drawings, routings, prints, summaries, specifications, and other process data. Ability to write standard documentation. Ability to communicate with other employees to share information, and solve problems
  • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals
  • Requires the ability to operate a wide variety of equipment including CNC machines, broaches, burring, washing equipment, a wide variety of small hand and power tools, and precision measuring tools. Requires knowledge of gear principles, inspe