Biomedical Engineer Resume Samples

4.9 (86 votes) for Biomedical Engineer Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the biomedical engineer job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Resume Builder
CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.
USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.
SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Create a Resume in Minutes
NY
N Yost
Nettie
Yost
486 Batz Spring
San Francisco
CA
+1 (555) 270 6663
486 Batz Spring
San Francisco
CA
Phone
p +1 (555) 270 6663
Experience Experience
New York, NY
Biomedical Engineer
New York, NY
Miller Inc
New York, NY
Biomedical Engineer
  • Identifying areas of improvement within clinical workflows and provides information to assist in the provision of consultancy services to stakeholders
  • Working under the supervision of a manager or designee, perform all phases of scheduled and corrective repairs of biomedical equipment and medical systems
  • Establishes and optimizes test methods and protocols for studies during methods development, pre-verification and verification phases of product development
  • Develop and evaluate performance of diagnostic devices and instrumentation
  • 6 to 12 months of working in medical device design, development, support
  • Maintain detailed records of each case in accordance with the company’s Quality Management System
  • Executes studies: bench top, simulated tissue and wet lab studies
New York, NY
Manager, Biomedical Engineer
New York, NY
Bayer, Dickens and Ferry
New York, NY
Manager, Biomedical Engineer
  • Establishes work priorities and provides daily supervision/support to multiple locations and teams
  • Interprets test results and makes recommendations to solve performance deficiencies
  • Prioritizes work load effectively and complete all work assignments in a timely manner
  • Adheres to performance metrics of ITM completion, work order closure, and parts returns in a timely manner
  • Provides technical guidance, mentoring and training to other employees in the department
  • Repairs, tests, perform ITM, and calibrates most classes of medical equipment according to OEM recommendations
  • Makes critical decisions in the absence of the Director of Biomedical Engineering
present
Phoenix, AZ
Senior Biomedical Engineer
Phoenix, AZ
Adams-Kreiger
present
Phoenix, AZ
Senior Biomedical Engineer
present
  • Create test protocols and manage preclinical studies
  • Develop procedures and processes under GLP guidance
  • Select off the shelf biomedical instrumentation
  • Design innovative miniature sensors with high response times
  • Design systems and components to support the manufacture and testing of innovative prototypes
  • Analyze data and present test results
  • Other duties as assigned
Education Education
Bachelor’s Degree in Engineering Technology
Bachelor’s Degree in Engineering Technology
University of Florida
Bachelor’s Degree in Engineering Technology
Skills Skills
  • Strong attention to detail
  • Working knowledge of CAD modeling and drafting (i.e. Solid Works)
  • Medical terminology and medical device experience highly desirable
  • Basic proficiency in anatomy and physiology, practical surgical experience
  • Basic knowledge of company products, new product development process, and methods for gaining customer insight
  • Written and oral communication skills & attention to detail
  • Ability to work in fast paced environment
  • Professional public speaking skills
  • Ability to work independently to manage multiple priorities in a fast-paced environment
  • Proficient in Microsoft Office and Excel
Create a Resume in Minutes

15 Biomedical Engineer resume templates

1

Biomedical Engineer Resume Examples & Samples

  • Mechanical design of prototype units and components of medical devices that meet required specifications
  • Define and maintain specifications of components
  • Create the process and procedures for fabrication and assembly of prototype medical devices
  • Test prototype units for robustness, safety and functionality
  • Troubleshoot prototype units and components using sound analytical methods
  • Coordinate with outside suppliers for selection and sourcing of material and components
  • Coordinate with outside suppliers for testing of materials and disposable parts
  • Observe and document the interaction of device with physicians as it pertains to the performance of the medical device
  • Write technical and regulatory documents to comply with quality system
  • Provide documentation of inventions for patent applications and review alternative technology IP
  • BS in Biomedical Engineering or equivalent
  • Functional and technical knowledge of medical and biomedical devices
  • Skills in design, drafting using Solid Works or similar 3D CAD
  • Ability to understand and operate complex equipment and systems from manuals or training
  • Willingness to dive into new environments and gain new knowledge
  • Manual dexterity to conduct experiments and assemblies with precision and care with attention to details
  • Effective oral and written communication skills with the ability to communicate clearly to others in different functions, at various levels
  • 2 yrs of medical device or similar experience
2

Biomedical Engineer Resume Examples & Samples

  • Perform pre-issue and asset accounting, equipment installation and de-installation of related equipment as needed
  • Performs scheduled and unscheduled inspections, maintenance and electrical safety tests of biomedical equipment where applicable to maintain code compliance
  • Responsible for documenting the results of all inspections, maintenance and tests
  • Must work collaboratively with all other biomedical engineers specialties (Instrumentation, X-Ray, CT/MR, Diagnostic Ultrasound, Nuclear Med, Clinical Laboratory, RT/Anesthesia, Ophthalmology/Lasers, and Clinical Systems Integrations), KPIT, Business Partners, and Original Equipment Manufacturer (OEM) representatives
  • Frequent travel will be required for the Shared Services/Support biomed engineers to provide service support
  • Occasional travel will be required for the Stationary Service Area Support biomed engineers to provide service support to other sites
  • All biomed engineers will be required to travel to attend technical training
  • Will be assigned to weekday and weekend on-call schedule to perform emergency service
  • Minimum four (4) years experience of formal and on the job training
3

Biomedical Engineer Resume Examples & Samples

  • Minimum four (4) years of experience of formal and on the job training
  • Stationary Service Area Support:General Instrumentation - Must have a minimum four (4) years of service experience and formal training working on various Instruments used in a hospital environment to support patient care
  • Bachelor's degree in engineering or related science degree preferred
4

Biomedical Engineer Ct / mr Resume Examples & Samples

  • Working under the supervision of a manager or designee, perform all phases of scheduled and corrective repairs of biomedical equipment and medical systems
  • Individual is required to complete applicable documentation of all work performed, in a timely manner
  • Afterhours work may be required on a scheduled and nonscheduled basis to complete required work
  • Communication devices will be supplied and will need to be kept ON during duty hours
  • Computed Tomography Magnetic Resonance (CT/MR) - Must have a formal training from the leading industry OEMs, with minimum four (4) years of service and OJT training for service/support of General Electric Healthcare (GEHC), Philips and Siemens CT and /or MRI Systems
5

Senior Biomedical Engineer Resume Examples & Samples

  • Create comprehensive requirements documentation
  • Select off the shelf biomedical instrumentation
  • Design systems and components to support the manufacture and testing of innovative prototypes
  • Design innovative miniature sensors with high response times
  • Analyze data and present test results
  • Develop procedures and processes under GLP guidance
  • Create test protocols and manage preclinical studies
  • Familiarity with working under a quality system and medical product design preferred
  • Familiarity and comfort with blood handling equipment is desired
  • Additional work showing versatility in other disciplines (Mechanical or Software Engineering) is highly desired
6

Biomedical Engineer Resume Examples & Samples

  • View patient CT and MRI studies in DICOM format and identify anatomies of interest
  • Maintain detailed records of each case in accordance with the company’s Quality Management System
  • General knowledge of human anatomy
  • Experience with medical image processing software (Mimics, OsiriX, Amira, 3D-Doctor)
7

Biomedical Engineer Resume Examples & Samples

  • Interact directly with surgeons regarding clinical details of orthognathic surgery
  • Use CAD software to manipulate 3D files for surgical simulation
  • Manage multiple priorities/projects at one time
  • Collaborate with cross-functional team to deliver custom patient-specific products for a 510k-approved medical device
  • Professional public speaking skills
8

Biomedical Engineer Resume Examples & Samples

  • Interact directly with surgeons regarding clinical details of craniomaxillofacial surgery
  • Collaborate with global cross-functional team to deliver custom patient-specific products for an internationally regulated medical device
  • Occasional travel within European markets to represent company at tradeshows/surgical society meetings
  • Support manufacturing production of 3D printed medical devices
  • Technical inspection and verification of physical deliverables against established quality and regulatory requirements
  • Ability to work independently to manage multiple priorities in a fast-paced environment
  • Functional use of additional European languages such as German, French, Spanish, Italian, etc
  • Experience with presurgical planning
9

Senior Biomedical Engineer Resume Examples & Samples

  • Minimum of 7 years experience is required; If MS - 4 years experience is required; If PhD - 0-2 years experience is required, PhD can be substituted for experience if the post graduate study field was directly applicable to the technology required by Olympus’ products
  • Experience in medical product development and/or biomaterials is preferred
  • Strong written and oral communication skills are required
  • Proficiency in the design and development of biomaterials is essential
  • Understanding of the design, development, and tolerancing of complex systems is necessary
  • Experience in the design and development of implantable materials and experience working with materials of natural/biological origin is a plus
  • Proficiency in the design of test fixtures for the qualification, performance and verification / validation tests of new and existing products is necessary
  • Experience in the design and development of products subject to domestic and international standards (ISO 13485, ISO 14971, IEC 60601, ISO 10993 etc) is preferred
  • Must be comfortable leading multidisciplinary teams in bringing a project from conception through market release
  • Must be self-motivated with a strong sense of urgency
  • Must have a sense of ownership and a desire to follow a project from inception to full production
  • Proficiency in the use of CAD to create models for use in design, prototyping, and developing medical devices
  • Working knowledge of basic Microsoft Applications including Word, Excel, Outlook, PowerPoint and Project is necessary
  • Working knowledge of statistical analysis package (Stat Ease, Minitab) is preferred
  • Must have a strong engineering aptitude to work in a close team environment with other engineers
10

R&d-senior Biomedical Engineer Resume Examples & Samples

  • Assist in planning project activities and schedules based on experience and knowledge through Project Management principles
  • Complete design tasks such as analysis, modeling, simulation, developmental testing, drawing creation to achieve project objectives for new product development
  • Work with Hill-Rom’s intellectual property department to develop and patent innovation in the area of support surfaces
  • Responsible for product performance characteristics that improve patient clinical outcomes as well as performance characteristics related to patient and caregiver satisfaction
  • BS Degree in Biomedical or Mechanical Engineering
  • 6+ years of engineering experience or comparable experience
  • Experience with CAD tools (Solid Edge), statistical tools (Minitab) and simulation tools (ANSYS)
  • 4+ years working in cross functional teams consisting of discipline specific engineers, or comparable experience
11

Biomedical Engineer Resume Examples & Samples

  • Integrate molecular diagnostic assays into novel devices and workflows
  • Develop and evaluate performance of diagnostic devices and instrumentation
  • Perform experiments using biological materials in BSL-1/BSL-2 laboratories
  • Design, build, and test prototype devices
  • Support development of technical product specifications
  • Innovate and contribute to Canon’s intellectual property portfolio
  • Maintain impeccable records including data books and computer generated data files, quantitative analysis of data, laboratory protocols, and summary reports
  • Present data to small working groups as well as to the larger project teams
  • Work in a dynamic matrix environment with a moderate degree of independence
  • Cooperate with coworkers within an organized team environment and effectively communicate project status to a supervisor
  • Work with external sources and/or vendors to identify and implement applicable materials, components and technologies
  • Participate in technical design and program reviews
  • Participate in the development of Manufacturing/QC procedures
  • Provide Engineering Manager with information of activities and project updates. Provide timely and accurate monthly reporting as needed. Make presentations internally and externally as needed
  • Write invention disclosures to protect new hardware designs which may provide Canon with proprietary advantage in the marketplace
  • Participate in an ongoing surveillance of commercial and scientific literature and conferences to maintain awareness of the latest technologies and relevant techniques and information of use in system development
  • Maintain confidentiality of assigned projects
  • Comply with safety procedures and standards
  • Bachelor of Science Degree in Engineering or equivalent technical discipline; preferred consideration will be given to applicants with a degree in Chemical Engineering, Biomedical Engineering, Bioengineering, Materials Science/Engineering or related field
  • One or more years of experience in academic or industry environment. Prior research experience in the form of internships is strongly preferred
  • Experience with molecular diagnostic instruments and/or methods (e.g. DNA extraction & PCR) is required
  • Experience performing detailed experiments (e.g., bench testing) is required
  • Experience with programming languages such as MATLAB, C/C++, or LabVIEW is required
  • Demonstrated analytical abilities for Design of Experiments, statistical data analysis, and scientific data reporting is required
  • Excellent verbal and written communication skills, the ability to work in a team environment and ability to function with a moderate degree of independence are required
  • Experience designing, fabricating, and testing prototype devices is strongly preferred
  • Experience with computer aided design (CAD) software such as SolidWorks is a plus
  • Experience with development of medical or in vitro diagnostic (IVD) products is a plus
  • Experience with microbiology is a plus
12

R&d-advanced Biomedical Engineer, Surfaces Resume Examples & Samples

  • Responsible for the design and development of support surface systems with the Global Surfaces NPD team and focused on innovation
  • Design and development of support surface activities may include design of textiles, pneumatics systems, mattress materials, or plastic components
  • Complete statistical analysis of product performance to ensure confidence in the design
  • Work with codes and standards to ensure compliance to all regulatory and environmental sustainability requirements
  • 4+ years of engineering experience or comparable experience
  • Experience with textiles and support surface materials such as foam, fabric, or fire barrier
  • Knowledge of statistical methods including reliability analysis, DOE, etc. for analyzing design confidence
  • Strong Interpersonal skills with the ability to work collaboratively with others in a team environment
  • Working knowledge of Microsoft Office and Engineering Software
  • Successful record of taking products through a new product development process from inception to final product
  • Experience in the medical device industry and FDA Regulations is preferred
  • Experience with project management or PMP certification is preferred
  • 2+ years working in cross functional teams consisting of discipline specific engineers, or comparable experience
13

Biomedical Engineer Resume Examples & Samples

  • Analyzes and corrects malfunctions on a variety of medical equipment systems. Analysis and corrective methods include; observation of front panel and controls; interpretation of block and schematic diagrams; utilization of appropriate test equipment; replacement of components, PC boards, or subsystems as appropriate; calibration and adjustment to manufacturers specifications; working with clinical personnel to correct operator based problems; documentation of work performed including that provided by outside service
  • Directly performs or schedules with outside service vendors the performance assessment and preventive maintenance on a variety of equipment according to established procedures: inspects, calibrates, adjusts, lubricates and repairs or replaces components. Documents work performed
  • Performs inspection and certification of performance of new equipment / systems, coordinates assembly / installation. Prepares and recommends maintenance and test specifications for each electrical and electronic devices and defines inspection and calibration cycles. Performs electrical safety inspections and performance assurance testing. Completes documentation for entry into the computerized maintenance management system
  • Advises on specifications for purchases on new equipment and recommends replacement of obsolete or irreparable equipment. Provides new product evaluation as requested
  • Ensures compliance with medical equipment hazards alerts, advises affected clinical personnel of hazard alerts, takes appropriate corrective action, and documents
  • Performs investigative evaluation of medical equipment involved in patient and employee incidents / accidents. Documents findings and reports as required
  • Assists, as required, with staff in-service education
  • Education - Develops and implements a plan for professional growth. Maintains current with advancing technology, as required, to perform duties
  • Performs miscellaneous duties as directed in support of the need of the organization
  • Background servicing medical equipment with emphasis on multi manufacturer experience and years of service
  • Experience servicing computer client-server systems
  • Computer networking certification
  • Knowledge and skill using Microsoft Word, Excel and Access
14

Biomedical Engineer Resume Examples & Samples

  • Works independently to repair all types of biomedical instrumentation in the MAS region. Assignment may include anywhere from two to seven medical facilities. Analyzes and corrects equipment malfunctions to include: observation of front panel indicators; interpretation of block and schematic diagrams; utilization of appropriate test equipment; replacement of components, PC boards, or subsystems as appropriate
  • Performs Preventive maintenance inspections. Verifies, calibrates, and certifies proper operation of all biomedical equipment in assigned facilities. Restores equipment to manufacturers' specifications. Works with clinical personnel to correct operator based problems. Uses knowledge and experience to test and maintain biomedical instrumentation not having specific maintenance procedures
  • Receives new equipment/systems and coordinates assembly/installation. Performs initial electrical safety inspections and assurance testing. Provides or helps coordinate in-service training. Inventories and completes documentation for entry into automated Maintenance Management Systems
  • Performs miscellaneous duties in support of the Biomedical Maintenance Program including, but not limited to: project management; IT integration planning and implementation; technology assessment; property accountability; incident reporting; supply management; maintenance of shop operations; capital review; oncall& emergency services, etc
  • Employs sound computer skills to complete job. Uses word processing, spreadsheets, databases and similar programs to enhance job performance
  • Ensures compliance with all federal/state/local rules and regulations and all applicable policies and procedures governing Kaiser Permanente, National Facilities Services, and Biomedical Engineering operations. Assists in developing and maintaining a comprehensive and cost-effective Medical Equipment Management Program to comply with same
  • Minimum four (4) years of experience serving comprehensive biomedical equipment in a hospital or related health service environment required
  • Associate's degree in biomedical instrumentation maintenance and repair, OR two (2) years of experience in a directly related field preferred
  • Certification in medical instrumentation by AAMI, VA BMET, or similar organization preferred
15

Biomedical Engineer Intern Resume Examples & Samples

  • Use CAD software to manipulate 3D files and combine multiple datasets for surgical planning
  • Manage multiple priorities and communicate closely with a multidisciplinary team
  • 0-2 years of relevant work experience
  • 3D design experience in CAD software (FreeForm, Solidworks, Magics)
  • Familiarity with medical imaging modalities and DICOM
  • Experience with rapid-prototyping technologies like SLA, SLS, EBM
  • Exposure to medical devices and regulation (FDA, ISO 13485, etc)
16

Biomedical Engineer Resume Examples & Samples

  • Education & Training
  • BS in Engineering or Graphic Design with strong background in CAD and 3D applications
  • Skills Desired
  • Desired
17

Biomedical Engineer Resume Examples & Samples

  • Minimal within the VISN20 area
  • Specified academic courses: Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements. The courses must be fully acceptable toward meeting the requirements of a professional engineering curriculum
  • Physical Requirements. See VA Directive and Handbook 5019
  • English Language Proficiency. Biomedical engineers must be proficient in spoken and written English
  • Ability to effectively communicate both orally and in writing with a wide variety of individuals, including technical and professional clinical staff, to convey highly technical information
  • 3. Ability to manage a recall and safety alert program for medical devices, medical device incident investigations to assure compliance with patient safety goals, SMDA, and JCAHO requirements
  • 4. Advanced knowledge of, and ability to apply, the principles, theories, concepts, and practices of biomedical engineering. This would include the ability to keep abreast of changes in technology and utilize the information gained in the solution of biomedical engineering problems to meet operational needs
  • 5. Ability to directly support the most complex and specialized clinical technology including service, system administration, training, and quality assurance
18

Supervisory Biomedical Engineer Resume Examples & Samples

  • Bachelor's degree: Professional engineering. To be acceptable, the curriculum must : (a) be in a school of engineering with at least 1 curriculum accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineering curriculum; OR, (b) include differential and integral calculus, and courses (more advanced than first-year physics and chemistry) in 5 of the following 7 areas of engineering science or physics: (1) statics and/or dynamics; (2) strength of materials (stress-strain relationships); (3) fluid mechanics and/or hydraulics; (4) thermodynamics; (5) electrical fields and circuits; (6) nature and properties of materials (relating particle and aggregate structure to properties); (7) any other comparable area of fundamental engineering science or physics, such as optic, heat transfer, soil mechanics, or electronics
  • Ability to conduct capital asset and infrastructure planning for medical equipment spanning initial concept, installation, and effective implementation of complex medical equipment
  • Knowledge of most complex and specialized clinical technology including service, system administration, training, and quality assurance
  • Expert knowledge of, and the ability to interpret and apply, complex codes, regulations, guidelines, and standards associated with the biomedical engineering field
19

Biomedical Engineer Resume Examples & Samples

  • Organize, analyze, interpret, and evaluate scientific data in the solution of engineering problems. Part-Time Experience.Part-time experience as a professional biomedical engineer is credited according to its relationship to a full-time workweek. For example, a biomedical engineer would receive 1 week of full-time credit for each 2 weeks of half-time work
  • 1. Ability to conduct an equipment management program that meets current TJC and NFPA requirements
  • 2. Ability to develop a curriculum for a continuing education program that addresses the safe and effective use of medical equipment and/or technology.*3. Ability to manage a recall and safety alert program for medical devices including medical device hazard investigations to assure compliance with patient safety goals, SMDA, and TJC requirements. 4. Skill in advising clinical and administrative staff on medical engineering technology, including existing and emerging technology and which addresses viability, long-term suitability, compatibility and/or safety.*5. Ability to analyze organizational and operational problems and recommend timely and economical solutions involving medical equipment spanning initial concept, installation, and effective implementation of complex medical equipment
20

Biomedical Engineer Resume Examples & Samples

  • Former Air Force officer with experience in Biomedical Engineering squadron operations
  • General office administrative and clerical skills to perform receptionist duties and answer telephones
  • Ability to organize and manage various time-dependent tasks and requirements
  • Related bachelor's degree
21

Biomedical Engineer Resume Examples & Samples

  • Performs routine engineering assignments of related tasks which are typically a focused portion of larger projects. These tasks provide experience and familiarization with the engineering staff, methods, techniques, theories, Corporate and division SOP’s, policies and projects
  • Test Method Validation experience is preferred, but not required
  • Document development work including writing specifications for manufacturing or scientific test results
  • Ability to solve routine design and engineering tasks with some assistance. Able to solve problems with periodic monitoring
  • Assists in the preparation and participation in technical reviews and responsible for organizing data and preparing appropriate documentation for assigned projects
  • Kelly-sponsored Affordable Care Act health care coverage available to eligible employees
  • Group insurance options*
  • Service bonus plan
  • Holiday pay plan
  • Weekly electronic pay options
  • Online training campus that provides more than 3,000 free courses to help improve and develop skills
  • Exclusive online employee community
  • Employee assistance program available at no cost
  • Corporate discounts
  • Transportation Spending Accounts
  • Offered and administered by Leslie & Associates. These plans are not sponsored by Kelly Services
22

Biomedical Engineer Clinical Resume Examples & Samples

  • Managing the medical equipment plan and ensuring joint commission and NFPA requirements are met and maintained
  • Managing the recall and safety alerts program for medical devices, including medical device incident investigations
  • Designing, planning, and implementing connectivity, security, and cost effective support of existing and pre-purchase instrumentation
  • Performing as a technical resource in regards to network communication, interconnectivity, and software functionality of medical equipment
  • Providing for the professional engineering management and supporting a complex, diversified inventory of networked and software driven medical equipment
  • Professional registration: Current registration as a professional engineer by any State, Territory, Commonwealth of the United States (e.g., Puerto Rico), or the District of Columbia. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than a written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State board's eminence provision as a manufacturing engineer typically would not be rated eligible for biomedical engineering positions
  • If you are currently employed in the federal government, include your most recent SF-50 showing title, series, and grade
23

Biomedical Engineer Clinical Resume Examples & Samples

  • Veterans with no preference and all other qualified U.S. Citizens
  • CV or Resume (when listing previous employment please include month and year)
  • Responses to the Occupational Questionnaire
24

Senior Biomedical Engineer Resume Examples & Samples

  • Required – BS in Mechanical Engineering, Biomedical Engineering or similar with 5+ years of design and development experience
  • Preferred – MS or PhD in Biomedical Engineering or Chemical Engineering or similar with 2+ years of design and development experience
  • Demonstrated capability for designing and developing a medical device or components, or manufacturing process, especially products involving degradable implantable components
  • Demonstrated ability in standard mammalian cell culture techniques and live / dead assays
  • Demonstrated ability in preclinical model design and studies
  • Demonstrated strength in building strong relationships at all levels of the organization, cross-functionally, and with key people external to the organization
  • Excellent documentation skills
25

Biomedical Engineer Resume Examples & Samples

  • BS in mechanical/biomedical engineering or biological science
  • BS + 1-2 years academic and/or industrial
  • Skilled scientist or engineer with understanding of biomedical device industry
  • Basic proficiency in anatomy and physiology, practical surgical experience a plus
  • Medical terminology and medical device experience highly desirable
  • Excellent verbal and written communication skills with a publication track record
  • Computer: MS Word, PowerPoint, Excel, Project, Minitab
  • Experience in product design and development
  • Team player, collaborative mindset
26

Biomedical Engineer Resume Examples & Samples

  • Assisting with capital asset and infrastructure planning for medical equipment
  • Serving as a contracting officer's representative for biomedical equipment related projects and acquisitions
  • Serving as a technical advisor and subject matter expert in the field of biomedical engineering, directly supporting specialized clinical technology including service, system administration, training, and quality assurance
  • Coordinating quality management data for biomedical engineering reports compiling data for quarterly report and assisting with completing the quarterly and annual EBERS (Enhanced Biomedical Resources Survey)
  • Written Test: Evidence of having successfully passed the Engineer-in-Training (EIT) examination, or the written test required for professional registration, which is administered by the Boards of Engineering Examiners of a State, Territory, Commonwealth of the United States (e.g., Puerto Rico), or the District of Columbia
  • Specified academic courses: Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements. The courses must be fully acceptable toward meeting the requirements of a professional engineering curriculum as described in paragraph A
  • Related curriculum: Successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions
27

Biomedical Engineer Resume Examples & Samples

  • Effectively satisfying the customer's needs for Preventative Maintenance (PM), updates/upgrades, corrective/reactive service, installations and/or workshop repairs in accordance with Managed Equipment Service contractual obligations (contract obligations & or KPI's)
  • Liaising with Clinical staff, the Facility Manager and Vendors to ensure the Siemens MES service meets or exceeds expectations
  • Identifying areas of improvement within clinical workflows and provides information to assist in the provision of consultancy services to stakeholders
  • Timely completion of Service Reporting with good liaison with all stakeholders ensuring reporting occurs inline within contractually defined time limits
  • Act as Departmental member responsible for the maintenance/calibration of General Purpose and Specialist Test Equipment within the Dept ensuring timely equipment availability and compliance to NATA or appropriate applicable standards
  • Comply with all Occupational Health & Safety (OH&S) policies, site specific policies, service escalation procedures and that all customer requests, complaints and comments communicated are passed to the relevant personnel for action
  • To maintain personal knowledge of safety instructions and operational procedures and participate in training courses including 'self learning', computer based and 'on the job' training and external training courses as required throughout the course of normal employment
  • To ensure that all tools and test equipment issued to job holder are properly maintained, calibrated and all company assets are kept safe and secure at all times. Inspect and check issued safety equipment on a monthly basis
28

Manager, Biomedical Engineer Resume Examples & Samples

  • The Biomedical Engineer Supervisor will utilize standard and specialized electronic test equipment and tools to perform calibration, maintenance, and repairs of medical equipment
  • Repairs, tests, perform ITM, and calibrates most classes of medical equipment according to OEM recommendations
  • Performs departmental audits/rounds and inventory reconciliation
  • Serves as a member or advisor to the hospital’s Environment of Care (EOC) and Risk Management
  • Prioritizes work load effectively and complete all work assignments in a timely manner
  • Maintains accurate medical equipment documentation as required by current policies and procedures
  • Orders parts and supplies necessary for the servicing of medical equipment to maintain required par levels
  • Documents work order time and expenses in a timely and accurate manner
  • Supervises services provided by outside vendors, original equipment manufacturers (OEM), to ensure quality and scope of services have been met, and validate field service report
  • Maintains current knowledge of pertinent regulatory agencies and the policies, codes, standards, and regulations that apply to the clinical equipment
  • Maintains documentation required by management and as outlined by current policies and procedures
  • Inspects incoming equipment for compliance with codes, standards and manufacturer’s recommendations
  • Orders parts and supplies necessary for the servicing of medical equipment
  • Provides technical guidance, mentoring and training to other employees in the department
  • Serves as a reference source for clinical engineering and clinical staff with regards to appropriate procedures for the operation and maintenance of clinical equipment
  • Uses office automation hardware, software and diagnostic service software appropriate to the equipment being serviced
  • Updates medical equipment technical library as new versions are available
  • Demonstrates initiative and concern for planning, time utilization and cost containment
  • Interprets test results and makes recommendations to solve performance deficiencies
  • Adheres to performance metrics of ITM completion, work order closure, and parts returns in a timely manner
  • Supports multiple hospitals, specialized laboratories, and clinical research facilities
  • Establishes work priorities and provides daily supervision/support to multiple locations and teams
  • Makes critical decisions in the absence of the Director of Biomedical Engineering
  • Must have effective communication skills, both oral and written
  • Must have excellent interpersonal and customer service skills
  • Eight (8) to ten (10+) years of experience with biomedical repairs / service
  • Advanced experience in Laboratory, Clinical Research and Surgical equipment
  • Working familiarity with TJC accreditation and knowledge of state and local regulatory agencies required
  • Proficient in all skills required for a BMET III
  • Ability to use an equipment management program that meets current CMS, TJC, AHCA, and other AHJ requirements
  • Knowledge of electrical safety theory, and be able to perform electrical safety testing on medical equipment
  • Ability to manage a recall and safety alert program for medical devices including medical device hazard investigations to assure compliance with patient safety goals, SMDA, and TJC requirements
  • Knowledge of field's concepts, practices, and procedures
  • Management and leadership skills to support multiple locations and teams
  • Intermediate computer skills / abilities
29

Biomedical Engineer Resume Examples & Samples

  • Helping lead an engineering analysis laboratory to explore medical analytics
  • Participating in grand challenge events to explore applying engineering capabilities into the clinical domain
  • Working with clinicians to help develop medical analytics
  • Helping identify, apply, and test technologies that can be employed to provide remote access clinical support
  • Prototyping, designing, and testing sensors for clinical use
  • Performing clinical workflow analysis
  • Interacting and working with MITRE partnership clinicians and healthcare community to
  • Possibly mentoring and overseeing student interns supporting the work program
  • Biomedical experience
  • Technical understanding of medical sensors and how these are used clinically
  • Programming skills in several languages, such as Matlab, Python, or Java
  • Experience or familiarity with an IRB process
  • Excellent writing and oral communication skills
  • Basic statistics, mathematics, and engineering skills
  • Must be able to work effectively within a team environment as well as providing individual contributions
  • Must be self-motivated
  • Be forward-looking and able to explore novel approaches for applying engineering capabilities to help solve problems in the healthcare community
  • Possible experience or knowledge of international medical community technology developments
  • Possible experience working with industry or small start-up companies
30

Biomedical Engineer Resume Examples & Samples

  • Mechanical Engineering degree
  • Ability to understand, analyze, and troubleshoot complex systems
  • Working knowledge of CAD modeling and drafting (i.e. Solid Works)
  • Experience in designing and developing equipment
  • Ability to develop innovative solutions to complex problems
  • Ability to work effectively in cross-functional teams
  • Experience with automated test equipment development
  • Experience in the medical device field
  • Experience with development, analysis, evaluation and testing of medical systems
  • Understanding of manufacturing and quality standards
  • Experience in process verification and validation procedures
31

Biomedical Engineer Resume Examples & Samples

  • BS in Biomedical or Mechanical Engineering or other engineering discipline
  • 6 to 12 months of working in medical device design, development, support
  • Works within a team and actively participates in a collaborative environment
  • Written and oral communication skills & attention to detail
  • Able to complete complex engineering tasks with some oversight
  • Completes multiple tasks by identifying conflicts and escalating
  • Basic knowledge of company products, new product development process, and methods for gaining customer insight
  • Knowledge of study design and statistical principles
  • Design and execution of product testing and design transfer activities
  • Knowledge of Quality Systems requirements for medical devices
  • Up to 25% stateside travel
  • Experience in medical device R&D
  • Expertise in Digestive and/or Respiratory Health Medical Devices
  • A second language-Spanish would be an advantage
32

Junior Biomedical Engineer Resume Examples & Samples

  • BS in Mechanical or Biomedical Engineering
  • 2+ years of engineering experience in the Medical Device, or similar, quality regulated industries
  • Demonstrated fundamental understanding of manufacturing processes, e.g. casting, forging, CNC machining, coating, etc
  • Demonstrated familiarity with theory and practical application of ‘Geometric Dimensioning & Tolerancing’ (GD&T)
  • Demonstrated experience with a parametric CAD design package, with a strong preference for ProE. Should be capable of developing 2D drawings, manipulating 3D product models and modeling moderately complex fixtures and gages
  • Demonstrated proficiency in Microsoft Outlook, Microsoft Project, Microsoft Visio and Microsoft Office applications
  • Demonstrated interpersonal, communication and presentation skills. Must be comfortable presenting at department level meetings
  • Demonstrated experience dealing with suppliers and resolving supplier issues, particularly for Supplier Innovation role
  • Must be challenged by a team-based environment which places a high degree of emphasis on accountability for customer satisfaction, cost reduction and quality/GMP compliance
33

Biomedical Engineer Apprentice Resume Examples & Samples

  • Under supervision, evaluate basic customer biomedical equipment issues, implement appropriate repairs; as assigned, perform planned maintenance (PM), safety, environmental inspections and maintain effective customer relations. Follow appropriate GE policies, procedures, hospital protocol and complete necessary documentation, as guided
  • Maintain daily communications with customers as directed, to ensure resolution and proper follow-up, leading to customer satisfaction. As instructed, implement GE/customer facility contract, supporting business goals and objectives
  • Ensure proper care of spares, tools and test equipment and ensure calibration. Enhance and maintain technical knowledge of current standards, codes and procedures regarding safe and effective use of medical equipment formal instruction
  • Current student or recent graduate of no more than 6 months from an A.S., B.S. or M.S. Electronics, Biomedical Engineering, Medical Imaging Technology or Mechanical Principles degree program or equivalent DOD military education
  • Must maintain a cumulative GPA of a 3.0 or higher based on a 4.0 scale
  • Must be willing to submit to a background investigation, including verification of past employment, criminal history and education
  • Willing to take a drug test
  • Experience interfacing with both apprenticeal team members and external customers as part of a solution based service process
  • Local candidates strongly preferred
34

Biomedical Engineer Resume Examples & Samples

  • 3D design experience in CAD software
  • Proficient in Microsoft Office and Excel
  • Ability to multitask in fast paced work environment
  • Familiarity with medical imaging modalities
  • Experience with rapid-prototyping technologies (SLA, SLS, EBM, MJP, CJP)
35

Supervisory Biomedical Engineer Resume Examples & Samples

  • To Community Based Outpatient Clinics and VA Boston
  • Specified academic courses: Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements. The courses must be fully acceptable toward meeting the requirements of a professional engineering curriculum as described in paragraph 2.b(1)
  • Related curriculum. Successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)
  • 1. Ability to conduct an equipment management program that meets current JCAHO and NFPA requirements
  • 2. Ability to develop a curriculum for a continuing education program that addresses the safe and effective use of medical equipment and/or technology
  • 3. Ability to manage a recall and safety alert program for medical devices including medical device hazard investigations to assure compliance with patient safety goals, SMDA, and JCAHO requirements
  • Skill in advising clinical and administrative staff on medical engineering technology, including existing and emerging technology and which addresses viability, long-term suitability, compatibility, and/or safety
  • 5. Ability to analyze organizational and operational problems and recommend timely and economical solutions involving medical equipment spanning initial concept, installation, and effective implementation of complex medical equipment
  • c. Ability to translate management goals and objectives into well-coordinated and controlled biomedical work operations
36

Biomedical Engineer Resume Examples & Samples

  • Establishes and optimizes test methods and protocols for studies during methods development, pre-verification and verification phases of product development
  • Executes studies: bench top, simulated tissue and wet lab studies
  • Designs or coordinates the design of fixtures for studies
  • Utilizes knowledge of statistical processes to plan for pertinent studies (DOE)
  • Utilizes statistical software and principles to analyze data as applicable
  • Compiles results from studies in form of a comprehensive report