Network Tech Job Description

Network Tech Job Description

4.7
167 votes for Network Tech
Network tech provides expertise in the operation of specialized test equipment for fault locating and testing on transmission, submarine and communication cables.

Network Tech Duties & Responsibilities

To write an effective network tech job description, begin by listing detailed duties, responsibilities and expectations. We have included network tech job description templates that you can modify and use.

Sample responsibilities for this position include:

Must possess the ability to use basic cable test equipment
Performs CLI ride-out and track and repair leakage, as necessary
Pre-wires single dwelling units and multiple dwelling units (MDUs) in order to provide eady hook-up\ capabilities at the time of occupancy
Performs multi-product reconnects, requested and non-pay disconnects, and additional outlets for residential and residential-like products
Possesses knowledge of the National Electrical Code (NEC,) the National Electrical Safety Code (NESC,) the Occupational Safety and Health Act (OSHA,) Federal Communications Commission (FCC,) Environmental Protection Agency (EPA,) Department of Transportation (DOT,) American National Standards Institute (ANSI,) and various state and local codes including G.O
Performs standard home theater installations associated with video installations
Must have the ability climb poles, ladders and operate aerial lifts 18 to 20 feet above ground, as determined by the system's requirements
Performs underground location of existing plant using system prints and cable locating equipment in order to prevent cable damage and service interruption
Normal work shift may include evenings and/or weekends
Reviews all requested services with the customer in order to ensure understanding and agreement

Network Tech Qualifications

Qualifications for a job description may include education, certification, and experience.

Licensing or Certifications for Network Tech

List any licenses or certifications required by the position: SCTE, NCTI, NSD, HFC, ITIL, MTA, CCNA, DOT, CCNP, IAM

Education for Network Tech

Typically a job would require a certain level of education.

Employers hiring for the network tech job most commonly would prefer for their future employee to have a relevant degree such as Associate and Bachelor's Degree in Technical, Computer Science, Associates, Education, Information Technology, Science, Engineering, Electronics Technology, Information Systems, Networking

Skills for Network Tech

Desired skills for network tech include:

Hand and power tools
Basic electricity
Test equipment
Central office NAP functions
PC’s
Transmission and supervision characteristics
Analog
Comparable testing equipment
Digital test and transmission equipment
General input and analysis of ESS translations

Desired experience for network tech includes:

Exposure to dogs and other animals, construction areas, and the public in general as required
Works in crawl spaces, attics, and permit required confined spaces
Installs and removes set-top box and/or eMTA in order to provide customer with upgrades or downgrades in service
Must possess knowledge of basic mathematics, the ability to count and handle U.S. currency, and the ability to communicate with customers in a clear and straight
Organizes and performs all scheduled maintenance activities
Facilitating training of lower grade technicians to better understand Telnet, and Command Line Interface commands into the CMTS's, Routers, Switches

Network Tech Examples

1

Network Tech Job Description

Job Description Example
Our company is growing rapidly and is searching for experienced candidates for the position of network tech. Please review the list of responsibilities and qualifications. While this is our ideal list, we will consider candidates that do not necessarily have all of the qualifications, but have sufficient experience and talent.
Responsibilities for network tech
  • Possesses limited responsibility for the CMTS, this is to include
  • Facilitates training of lower grade technicians to better understand
  • Participates in operational meetings, conference calls and conferences
  • Facilitates training of lower grade technicians to better understand Telnet, and Command Line Interface commands into the CMTS's, Routers, Switches
  • Enters data into trouble ticketing system to document problems including diagnostic results and multiple product correlation
  • Innovate, Implement and Iterate high levels of automation and visibility to ensure exceptional levels of uptime and performance while minimizing manual intervention
  • Provide technical leadership for planning and execution of major Network Operations technology projects with enterprise-wide impact
  • Participate in the industry community to maintain leading edge expertise on Network and Infrastructure technology trends to identify strategic business implications and drive innovation throughout our network
  • Proactively define Network Operations services technology strategies that will deliver cost, cycle time, and maintainability benefits
  • Provide coaching and development to a team of direct reports and broad team of indirect reports to continue to develop critical technical and leadership skills in the organization
Qualifications for network tech
  • The knowledge of 1 or more scripting or programming languages (Shell, Perl, PHP, VBScript, Python)
  • Tracks scheduled network maintenance activities in applicable tools
  • A strong background in supporting data centre networks, global WANs and regional office LAN implementations, that support a diverse set of products and a geographically disparate workforce
  • Expert knowledge of WAN connectivity, transport types and protocols, including Ethernet point to point and VPN technologies
  • Advanced knowledge of Cisco Wireless Access Controllers and Access Points
  • Knowledge of voice and UC infrastructure including Avaya switches, VoIP, Polycom and Microsoft Lync
2

Network Tech Job Description

Job Description Example
Our company is growing rapidly and is looking to fill the role of network tech. Thank you in advance for taking a look at the list of responsibilities and qualifications. We look forward to reviewing your resume.
Responsibilities for network tech
  • Oversee project reviews, feasibility, cost benefit analysis, prioritization, initiation, execution and closure for all project work related to the program(s)
  • Oversee program delivery activities, including development and delivery of internal / external communications, establishing roadmaps, benchmarks, and metrics
  • Build and srive an Agile DevOps style culture of working and operating
  • To design, program, implement and operate network solutions to support technical and business requirements through timely delivery and compliance to internal technical standards and processes
  • Troubleshoot complex data center environments
  • Perform analysis and diagnosis of highly complex networking problems in the data center environment
  • Design, program, implement and operate enterprise solutions to improve network performance, capacity, and availability
  • Cross silo influence
  • Accountable for design, programming and operation of data center network
  • Accountable for level 3 network support with 24x7 escalation
Qualifications for network tech
  • Expert level experience with Juniper and Cisco required
  • Strong knowledge in TCP/IP, L2/L3 protocols, LAN, Spanning-tree, WAN, Metro, IPv4, IPv6, BGP, ISIS, OSPF, MPLS, QoS/CoS
  • Minimum of 10 years’ experience in leading multi-discipline technical teams
  • Experience with Router and Switch configuration such as Spanning-Tree, OSPF, BGP, EIGRP, IPSEC, DMVPN
  • Experience with network implementation projects
  • Familiar with network monitoring such as Solarwind and Netbrain or other monitoring tools
3

Network Tech Job Description

Job Description Example
Our innovative and growing company is hiring for a network tech. Please review the list of responsibilities and qualifications. While this is our ideal list, we will consider candidates that do not necessarily have all of the qualifications, but have sufficient experience and talent.
Responsibilities for network tech
  • Responsible to work with respective DC and CUS teams’ members on the review of network architecture and design, trouble-shooting, as well to work on the replacement of old or low capacity network system or devices, firewalls, DNS, Server and Traffic Load Balancers, switches, and routers
  • Responsible to work with the respective server and application teams’ members in trouble-shooting and identify root cause, related to network
  • Responsible for network devices, appliances, vulnerability review and assessment
  • Responsible for network devices, appliances, change implementation review and assessment
  • Responsible to conduct post implementation review on areas of improvement and tuning
  • Responsible to conduct and train Level 1 engineers, to empower and equipped the L1 engineers with the knowledge to run and maintain both the DC and campus networks
  • Gather user' hosting requirement, do product research, if necessary, of users' products, do network assessment and advice various teams for network related requirements
  • Perform functional and empirical analysis related to the design, development, planning, and configuration of networking, hardware, and/or software
  • Perform maintenance on network devices and system hardware and software including the restoration of hardware, software or configurations
  • Act in a lead role in integrating and schematically depict communication architectures, topologies, hardware, software, transmission, and signaling products
Qualifications for network tech
  • Familiar with datacenter network infrastructure
  • Preferably practitioner on agile and devops methodology
  • Have strong understanding on financials
  • 7 years of network engineer experience
  • Experience with Cisco Nexus 9000 (ACI / SDN experience preferred), Nexus 7000, Nexus 5000, Nexus 2000, Arista 7250QX, 7150, 7050X, F5, ADX SLB
  • Experience with banking Infrastructure projects such as server migrations, data center relocation
4

Network Tech Job Description

Job Description Example
Our company is searching for experienced candidates for the position of network tech. We appreciate you taking the time to review the list of qualifications and to apply for the position. If you don’t fill all of the qualifications, you may still be considered depending on your level of experience.
Responsibilities for network tech
  • Coordinate installations with user departments
  • Assist in the training and supervision of Network Engineers
  • Act in a lead role in the development of P&Ps and general standards, and procedures and controls for problem prevention
  • Research and identify hardware and software to meet Company needs
  • Prepare detailed functional specifications and coordinate RFPs
  • May be required to perform other duties of the Customer Service Technician II classification
  • Review with our Business Analysts (BAs) the desired Key Performance Indicators (KPIs) identified for each functional area within NAT&O
  • Work with subject matter experts to identify and document the data sources, tables and fields needed to access the data
  • Review and understand the data structure model used in the creation of the Content Administration dashboard
  • Work with subject matter experts and BAs to mirror the data structure model and visualization of the Content Administration dashboard and build dashboards for other functional teams
Qualifications for network tech
  • Must be available for standby rotation as neede
  • Experience with large scale global network environments
  • Knowledge in VPC, FabricPath(MLAG), OTV(VXLAN), NX-OS, EOS, IP internetworking, LAN Switching, Network Virtualization
  • Experience in IP Routing protocols (IGRP, OSPF, EIGRP, BGP)
  • Strong experience with network analysis tools like Gigamon, Riverbed and Sniffer
  • Professional level certifications
5

Network Tech Job Description

Job Description Example
Our innovative and growing company is looking to fill the role of network tech. We appreciate you taking the time to review the list of qualifications and to apply for the position. If you don’t fill all of the qualifications, you may still be considered depending on your level of experience.
Responsibilities for network tech
  • Gather all necessary information (as detailed in the Escalation Matrix) and submit to Engineering (Product/Services) for review
  • Be able to design, configure and troubleshoot QoS classification, marking and prioritization of network traffic (voice, critical applications, etc)
  • Experience configuring route plans, route lists, device profiles, calling search spaces, and partitions
  • Implementing and support multicast and Market Data connections
  • Support Checkpoint distributed Firewall infrastructure
  • Create/Support IPSec VPN infrastructure
  • Design, Implement Support both interior and exterior routing protocols consisting of OSPF and BGP
  • Support WAN that consists of DWDM WAN along with various P2P and MPLS connections
  • Works well with others to achieve common goals and to foster a cooperative climate, work independently in the field with little supervision
  • Attendance, conduct, and performance records will be considered in the selection process
Qualifications for network tech
  • Experience in programming of data center components using Python and APIs is a plus
  • Minimum of five (5) years of experience as a Network Engineer required
  • Must have a working knowledge of Microsoft Windows and Linux platforms
  • CCNA and ITIL V3 Awareness training preferred
  • Prior experience with Cisco ASA and Cisco Switches suite of products required
  • Prior experience with IDS/IPS, network access control, and Web/SPAM filters appliances required

Related Job Descriptions

Resume Builder

Create a Resume in Minutes with Professional Resume Templates