Mfg & Process Dvl Engineer Job Description
Mfg & process dvl engineer
provides guidance in Lean Six Sigma Methodology to team of Lean Six Sigma practitioners and process specialists.
Mfg & Process Dvl Engineer Duties & Responsibilities
To write an effective mfg & process dvl engineer job description, begin by listing detailed duties, responsibilities and expectations. We have included mfg & process dvl engineer job description templates that you can modify and use.
Sample responsibilities for this position include:
Establish Mold design, DFM, PFMEA, Molding process and Conditioning Standards and Rules
Design, conditioning and debugging of new tools to meet first article and CPK qualification target so as to facilitate new program start up
Good alignment Mold design peer review with MDE global team and cross function
Provide technical advise to enhance future product design through Mold engineering evaluation
Liaise with the quality assurance division to maintain a high standard of quality product from newly developed tool
Enhance and fix optimize molding process (best cycle time, best yield and lest material) for production with proper document control
Technically Support acquisition of new projects
Support sales regarding application and product selection
Execution of feasibility studies, concept development and cost calculations
Support of engineering projects and tasks as member of project teams
Mfg & Process Dvl Engineer Qualifications
Qualifications for a job description may include education, certification, and experience.
Education for Mfg & Process Dvl Engineer
Typically a job would require a certain level of education.
Employers hiring for the mfg & process dvl engineer job most commonly would prefer for their future employee to have a relevant degree such as Bachelor's and High School Degree in Engineering, Mechanical Engineering, Education, Design, Manufacturing, Mechatronics, Manufacturing Engineering, Industrial Engineering, Electrical Engineering, Engineering Mechanics
Skills for Mfg & Process Dvl Engineer
Desired skills for mfg & process dvl engineer include:
& Outlook
Word
Microsoft Project
Six sigma and lean manufacturing tools
Mil-aero products is desirable but not a requirement
Tool assembly
Good Manufacturing Process and Good Documentation Practice
Heat treatment & its process
Material specifications
Measurement
Desired experience for mfg & process dvl engineer includes:
Implement process innovation and process development in terms of cost reduction and increase efficiencies on the manufacturing lines
Demonstrate FDA QSR (21 CFR 820) and ISO13485 compliance in all areas of responsibility
Provide technical leadership in the areas assigned and provide "Design for Manufacturing" input to Pilot manufacturing, customers, and product commercialization teams
Design and implement new tooling, fixtures, and capital equipment including semi-automation to improve production efficiencies, reduce costs and improve ergonomics
Write all essential documents
Work closely with Pilot manufacturing engineering group to assist and coordinate project transfers from Pilot phase to Manufacturing phase
Mfg & Process Dvl Engineer Examples
1
Mfg & Process Dvl Engineer Job Description
Job Description Example
Our company is growing rapidly and is looking for a mfg & process dvl engineer. If you are looking for an exciting place to work, please take a look at the list of qualifications below.
Responsibilities for mfg & process dvl engineer
- Analysis and review of manufacturing processes
- Ensures that all requested EHS Requirements and Regulation are maintained, fully understood and complied with
- Activity & time reporting
- Establish DFM, PFMEA, Mold spec, Mold Design, Molding process and Conditioning Standards and Rules, and conduct tool design
- Manage projects to ensure timely debugging of new molds and processes to meet first article qualification target so as to facilitate new program start up
- Provide technical advice to enhance future product design through mold engineering evaluation
- Conduct mold tooling design review with the Engineering, Operation and Quality engineering
- Utilize analysis software applications and 53P to enhance molding process accuracy (5-step process, Mold-flow analysis, pressure loss)
- Approval of First Article inspections and process capability
- Drive the design and build of tools to support scientific injection molding (Balanced runners with melt flipper, cavity pressure)
Qualifications for mfg & process dvl engineer
- Be familiar with product requirements, concept prototyping, design and development (including verification and validations IQ,OQ,PQ), risk/failure mode assessment, performance and safety testing
- Work closely with Supply Chain and Supplier Quality groups to review or coordinate outside vendor activities to support cost reduction efforts and improved product quality
- Manage or develop technical solutions to design problems with vendors and in-house resources through design reviews, design audits, and prototype analysis
- Comfortable working in a collaborative team based environment with Operators, QC Inspectors, Supervisors, Leads, Quality Engineers and Production Manager
- Communicate effectively with customers under a variety of situations
- Prepare and conduct Design For Manufacturability (DFM) reviews for both product and tooling
2
Mfg & Process Dvl Engineer Job Description
Job Description Example
Our innovative and growing company is looking for a mfg & process dvl engineer. If you are looking for an exciting place to work, please take a look at the list of qualifications below.
Responsibilities for mfg & process dvl engineer
- Study or Introduce new technologies into process designs to maximize yield and efficiency
- Attend regional trade shows and continuously benchmark against industry best practices
- Support current production working with manufacturing
- Train the operators & inspectors to manufacture product following design DWGs and work instructions
- Support Non-conforming Product Disposition
- Launch and manage new thermoplastic injection mold builds within the Infotainment market segment
- Create RFQ and mold specifications on prototype and production molds
- Develop various approaches to sensor processing
- Evaluate multiple approaches to determine which processes are most consistent and economical
- Develop manual, semi-automatic, and high speed automatic assembly equipment for sensors
Qualifications for mfg & process dvl engineer
- Prepare mold related documents, mold spec,molding standard parameters ,PFMEA, WI, Maintainence WI, drawings
- Strong knowledge of injection molding processes (Injection, Insert-molding, two-shot)
- Bachelor degree in mechanical engineering or related disciplines(mold major is preferred)
- Minimum 12 years experience, at least 6 years in mold development experience, automotive industry or mold design experience are preferred
- Minimum 6 years experience, at least 4 years in mold trail run experience, automotive industry or mold processing
- 3 year's experience in plastic part/Mold or Metal part/Die Development at least
3
Mfg & Process Dvl Engineer Job Description
Job Description Example
Our innovative and growing company is looking for a mfg & process dvl engineer. To join our growing team, please review the list of responsibilities and qualifications.
Responsibilities for mfg & process dvl engineer
- Design and execute Design of Experiments to identify the manufacturing input parameters that drive and/or link directly to key performance attributes (outputs)
- Determine the control limits that are correlated to product functionality
- Perform Process qualification including all related documentation
- Identify the optimum settings for critical to performance inputs
- Ensure best practices regarding the use of and adoption of engineering processes and tools to allow efficient delivery of projects and the support of existing products
- Ensure engineering team implements and operates in accordance with Safe Launch procedures for NPI
- Work with receiving Manufacturing Engineering teams within the operations locations to transfer knowledge and lessons learned to ensure VOC improvements are continued for delivered processes
- Launch new assembly production processes for the Automotive Division
- Create the machine specifications for RFQ on prototype and production equipment
- Participate in and manage Machine Design Reviews with internal and external automation suppliers
Qualifications for mfg & process dvl engineer
- Baisc knowledge of Design Plastic Part or Metal, Basic Knowledge of Mold or Die
- Good communication with other members
- Responsible for developing / monitoring / reducing cost / sourcing, of assembly manufacturing processes for connector assemblies, including plastic to plastic and metal to plastic products in the Automotive arena
- Works closely with connector product engineering to develop in-house processes and / or external resources to ensure that the design is manufacturable at lowest cost
- Conducts or monitors process FMEAs, failure analysis, vendor audits and is responsible for approving first articles for new products using specific standards and specifications
- Must have 5 years minimum experience in Cable Assembly process engineering
4
Mfg & Process Dvl Engineer Job Description
Job Description Example
Our growing company is looking for a mfg & process dvl engineer. Please review the list of responsibilities and qualifications. While this is our ideal list, we will consider candidates that do not necessarily have all of the qualifications, but have sufficient experience and talent.
Responsibilities for mfg & process dvl engineer
- Must have 5-10 years minimum in automotive industry
- Leadership on continue improvement process using statistical tools
- Increased productivity and efficiency in the area, process improvements
- Transfers of products / production lines (international communication)
- Line balancing (Lean Manufacturing)
- Time & movement study
- Elaborate and review reports SCRAP, rejections, efficiency
- Establish operating procedures (Work instructions, visual aids)
- Coordinate plating recipes for product manufacturing
- Part numbers certification, development
Qualifications for mfg & process dvl engineer
- Specify, quote, and procure new machines (focused on Automation) and auxiliary equipment
- Proficient in machine, tool, very strong fixture (poka-yoke) methodology design using AutoCAD and/or Solid Works preferred
- Process control and integration into new and existing equipment
- A Bachelor's degree in Electrical or Mechanical Engineering and a minimum of five (5) years of experience in automation programming, or equivalent combinations of education, training and experience is required
- Responsible for developing / monitoring / sourcing, of assembly manufacturing processes for connector assemblies, including plastic to plastic and metal to plastic products in the Industrial Vehicle market
- Acts as lead manufacturing engineer on their assigned team for connector assembly operations and projects working predominately with outside suppliers in development of new equipment
5
Mfg & Process Dvl Engineer Job Description
Job Description Example
Our company is growing rapidly and is looking for a mfg & process dvl engineer. To join our growing team, please review the list of responsibilities and qualifications.
Responsibilities for mfg & process dvl engineer
- Precious metal management (Inventories, rates)
- Coordinate OEE process, manage internal controls such as 5’s, kanbans, purchasing
- Create the RFQ and mold specifications for prototype and production molds
- Utilize engineering tools such Mold Flow for mold design like gate and runner sizing, estimating pressure loss, warpage compensation
- Utilize advance cooling technologies like DMLS cooling cores/blocks, high heat transfer materials, etc to achieve required cycle times as needed
- Design and develop manufacturing processes for new products, product changes, and enhancements, related tooling and fixtures
- Process troubleshooting, refinements to improve product throughput, the design of fixtures and assembly techniques
- Responsible for Corrective Action and Preventive Action (CAPA) investigations Non-Conformance (NC) investigations and process activities
- Works under general direction, exercises discretion and independent judgement
- Collaborates with other colleges, peers and divisions
Qualifications for mfg & process dvl engineer
- Works closely with internal connector product and quality engineering to develop processes in-house and/or through external resources to ensure that the design is manufacturable at the best price
- Candidate should have a minimum of a BS Degree in Mechanical Engineering / Process Design and/or documented experience in a related design development skills function
- Preferred candidate will have 5+ years of documented manufacturing and automation design experience within the connector process assembly market preferably
- Experience in machine, tool, and fixture design required
- Heavy Equipment/Automotive experience preferred but not required
- Bachelor's Degree in Plastics Engineering Technology preferred