Chemical Process Job Description

Chemical Process Job Description

172 votes for Chemical Process
Chemical process provides subject Matter Expert support to Manufacturing and other departments for the design and operation of process equipment.

Chemical Process Duties & Responsibilities

To write an effective chemical process job description, begin by listing detailed duties, responsibilities and expectations. We have included chemical process job description templates that you can modify and use.

Sample responsibilities for this position include:

Removes paint layers on drums to ascertain defect type and location
Investigates machine stops and relays finding to expedite equipment repairs
Ensure that work area is clean and orderly to ensure safety
Perform manufacturing cost and efficiency analyses
Participates in customer and vendor audits
Leads response to, and corrective actions required as the result of customer audits and complaints
Use statistical techniques for process control and improvement (SPC)
Drive manufacturing cost reductions
Write/Certify/Review operating procedures as necessary
Writes capital expenditure requests, equipment performance specifications, action plans, responsibility lists, weekly project reports, work instructions, test procedures and other documentation to support factory operations

Chemical Process Qualifications

Qualifications for a job description may include education, certification, and experience.

Licensing or Certifications for Chemical Process

List any licenses or certifications required by the position: PMI, PE, CIH, CSP, PMP, EIT, SDCA, DOT, NADCAP

Education for Chemical Process

Typically a job would require a certain level of education.

Employers hiring for the chemical process job most commonly would prefer for their future employee to have a relevant degree such as Bachelor's and Associate Degree in Chemical Engineering, Engineering, Science, Chemistry, Process Technology, Technical, Military, Education, Biology, Technology

Skills for Chemical Process

Desired skills for chemical process include:

Chemical related manufacturing operations
Water treatment process techniques
Soluble oil compounds
Nomenclature of all assigned equipment and products
Storage and location of all equipment necessary for this operation

Desired experience for chemical process includes:

Capable in development of Datasheets
Previous experience at a government, DOE or commercial nuclear facility highly preferred
Minimum of 5 years related process engineering experience
Understanding & working knowledge of nuclear criticality safety principles
Day to day process engineering responsibilities for the dry chemical plant and AFFF foam blending operations
Participate in beaker

Chemical Process Examples


Chemical Process Job Description

Job Description Example
Our company is growing rapidly and is hiring for a chemical process. If you are looking for an exciting place to work, please take a look at the list of qualifications below.
Responsibilities for chemical process
  • Performs mold changeover according to molding schedule
  • Complies with established job safety practices, policies and procedures a specified in plant and corporate directives for the safe performance of the work assignment
  • Support the advanced environmental control and life support systems analysis group
  • Simulate and evaluate performance of life support systems for future NASA vehicles and habitats including the Orion spacecraft and vehicles capable of lunar or Mars missions
  • Correlate water and air process simulation models to test results
  • Model physical & chemical processes and size equipment performing life support functions for long duration space flights
  • Evaluate and refine requirements for life support equipment that will support future missions
  • Performs various manual or mechanical production and support functions by operating, adjusting and repairing the production and support equipment
  • Performs troubleshooting on production and support equipment
  • Performs Preventative maintenance on production and support equipment
Qualifications for chemical process
  • Establishing the design criteria, incorporating client requirements, estimate and/or scope basis and design basis, meeting applicable aerospace regulatory requirements
  • Producing detail design calculations and drawings for the project
  • Producing equipment specifications
  • Reviewing and checking vendor information and other discipline information needs for process engineering input
  • Reviewing chemical specifications and other vendor submittals for conformance to engineering drawings and specifications
  • Performing testing necessary to gather process information, check reliability and provide construction support

Chemical Process Job Description

Job Description Example
Our innovative and growing company is searching for experienced candidates for the position of chemical process. Please review the list of responsibilities and qualifications. While this is our ideal list, we will consider candidates that do not necessarily have all of the qualifications, but have sufficient experience and talent.
Responsibilities for chemical process
  • Evaluate raw material changes for impact on quality
  • Responsible for technology transfers of product line to "sister" sites
  • Provision of appropriate coaching and performance feedback to assigned reports
  • General scouting for new technology solutions, suitable for implementation in LPB manufacturing
  • Provide engineering support to refine current chemical manufacturing processes, with special attention to PSM and OSHA requirements
  • Perform requirements for documentation with regard to Process Safety Management (PSM) including development of P&ID, PFD and equipment specification requirement
  • Work with local plant management and process owners to drive PHA revalidations, recommendations and action items to completion
  • Lead risk assessments such as Hazard and Operability Studies (HAZOP), Layers of Protection Analysis (LOPA), Major Accident Risk analysis (MAR), and as required
  • Conduct experiments as defined by or in conjunction with other team members which may include Chemical, Electrical, Mechanical, and SW teams
  • Perform root cause analysis of process, quality, and HSE related issues
Qualifications for chemical process
  • Bachelor's degree in Chemical Engineering or equivalent degree
  • Minimum of three (3) years of experience with product development in a manufacturing environment
  • Education – BS degree in Engineering, Engineering & Management
  • Knowledge of process specific software applications like AspenPlus, HYSYS, HTRI, Fathom, Arrow, PipeFlo, will be an advantage
  • BS in Chemical Engineering with minimum 5 years total experience and with a minimum of 3 years controls experience preferably with either Iconics or Emerson DeltaV
  • Demonstrated experience with process design that includes equipment sizing, heat loads

Chemical Process Job Description

Job Description Example
Our company is hiring for a chemical process. Please review the list of responsibilities and qualifications. While this is our ideal list, we will consider candidates that do not necessarily have all of the qualifications, but have sufficient experience and talent.
Responsibilities for chemical process
  • Identifies areas for improvement (safety, cost and waste reduction, efficiency
  • The candidate must be capable of managing projects at all levels to include lab development resulting in production implementation
  • Implements, executes and promotes food safety of our products through the use of Good Manufacturing Practices (GMP's), performance to Standard Operating Procedures (SOP's), Security Measures, Housekeeping, Hazard Analysis & Critical Control Point (HACCP), all quality, regulatory, environmental, safety and health guidelines and regulations
  • Independently plans and manages the activities on the development, implementation of procedures and processes in the field of chemical synthesis, formulation development and upscaling of these processes to production scale through multiple assigned projects
  • Liaison between different stakeholders (R&D, Marketing, Operations, Regulatory ect.) in moving the new developed products to commercialization phase
  • Contributes to scientific field or technique by troubleshooting/solving simple to complex scientific problems within R&T and Manufacturing
  • Demonstrates in this role scientific and technical leadership at project level
  • Coordinates, plans and executes experiments in a laboratory environment to include
  • Represents the PDN team, as a sound scientific professional, in meetings with internal customers (R&D, Marketing, Operations, Regulatory)
  • Interface with external customers supporting projects of various business units
Qualifications for chemical process
  • Interest and potential to advance into higher formal technical and/or production leadership roles
  • Chemical Engineering Degree from accredited university
  • Ability to meet fast paced deadlines while maintaining quality design
  • Willingness and aptitude to learn plate manufacturing processes and complex process interactions
  • Strong analytical skills to translate data analysis to real world process improvements
  • BS degree in chemical engineering from an accredited engineering school and five (5) years of dynamic chemical process simulation experience, or a MS degree from an accredited engineering school and four (4) years of dynamic chemical process simulation experience, or Ph.D

Chemical Process Job Description

Job Description Example
Our growing company is searching for experienced candidates for the position of chemical process. If you are looking for an exciting place to work, please take a look at the list of qualifications below.
Responsibilities for chemical process
  • Gives inputs to decisions within own discipline
  • Engineering design & project work
  • Actively represent Chemical Process R&D function on cross-functional CMC project teams, and coordinating with all other relevant functions
  • Conceive, plan, coordinate and manage route selection, process development and scale-up activities and personnel, both internally and at partners
  • Provide timely and accurate estimate for resources and timelines necessary to execute process chemistry programs
  • Ensure successful and thorough development of safe, robust, environmentally friendly and cost effective processes for APIs, according to department workflow and fit-for-purpose expectations
  • Ensure successful and timely production of API clinical supplies (for trials or drug product development) Technology Transfer of API processes to and Validation of API processes at manufacturing sites
  • Ensure detailed and comprehensive documentation of all relevant activities to comply with regulatory requirements, for intellectual property protection purposes, or to ensure complete capture of program and process knowledge
  • Actively contribute to the execution of Chem
  • Cleans equipment by ice blasting and using chemicals
Qualifications for chemical process
  • Has experience as an informal leader
  • Responsibilities include working in a team with other Fab Wet Process Engineering, Operations, Maintenance, and Construction disciplines, on all construction and install projects
  • Manage, review and evaluate process development chemical mixing requests
  • Work with Operations & Maintenance staff to evaluate and track performance of each system for efficiency, and compliance to design conditions
  • Basic understanding of scientific disciplines (math, chemistry, physics, reasoning, and mechanics)
  • Demonstrated ability to utilize and interpret information from charts and graphs

Chemical Process Job Description

Job Description Example
Our company is hiring for a chemical process. We appreciate you taking the time to review the list of qualifications and to apply for the position. If you don’t fill all of the qualifications, you may still be considered depending on your level of experience.
Responsibilities for chemical process
  • Issues Safe Work Permits, which involves high degree of proficiency on current operating conditions chemical, personnel and process safety risks associated with operating unit
  • Process monitoring activities include checking pH, taking product samples, catalyst degradation, differential pressure, chemical injection rates, checking for leaks, freezing, overheating
  • Performs basic equipment maintenance (adding lube oil, water, tightening valve packing, changing filters and steam traps, clearing equipment)
  • Perform all design tasks in a manner compliant with federal, state, industry, client, and company codes and standards
  • Work as an integral part of the Process Engineering team
  • Work under the direction of a Process Discipline Lead Engineer and Project Managers
  • Works on various adhesive products in a laboratory and pilot plant setting to prepare them for large-scale manufacturing
  • Involved in the design, development, optimization, and scale-up of processes for manufacturing of adhesives and chemical intermediates
  • Develops standard process design packages that can be used as a basis for installation of harmonized processes across regional plants
  • Identifies and relates chemical properties to process variables to ensure the product performance is within specifications
Qualifications for chemical process
  • Interpersonal skills, including handling conflict
  • Must be able to work in a team environment, maintain a positive and respectful attitude, and be able to perform tasks in a timely manner
  • The candidate must be able to utilize independent judgment to solve problems, have excellent organizational skills, and strive for continuous improvement
  • Ability and willingness to travel as required for training
  • Must be qualified or willing to obtain qualification to operate a fork truck
  • Basic understanding of chemical system, mechanical systems, and continuous process operations

Related Job Descriptions

Resume Builder

Create a Resume in Minutes with Professional Resume Templates